The relative error of the two lines

The relative error of the two lines, Total:30 items.

The international standard classification for "The relative error of the two lines" includes: Sewing machines and other equipment for the clothing industry , Limits and fits , Linear and angular measurements , Extraction and processing of petroleum and natural gas .

The Chinese standard classification for "The relative error of the two lines" includes: Sewing machine , Basic standards and general methods , Petroleum development .

---

Professional Standard - Light Industry

• QB/T 4298-2012 Testing method of relative tolerance of sewing machine high and low speed stitch length
• QB/T 4299-2012 Testing method of relative tolerance of sewing machine forward and backward stitch length

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 11336-1989 Measurement of departures from straightness
• GB/T 28912-2012 Test method for two phase relative permeability in rock
• GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
• GB/T 11336-2004 Measurement of departures from straightness
• GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods

Professional Standard - Aviation

• HB 7-1-1968 error curve clamp

Professional Standard - Petroleum

• SY/T 5345-2007 Test method for relative permeability

国家能源局

• NB/T 10037-2017 Gas-water relative permeability measurement in coal with unsteady state method

Professional Standard - Railway

• TB/T 2245-1991 Specifications for Radiography of Steel Fusion Welded Butt Joints

Taiwan Provincial Standard of the People's Republic of China

• CNS 5283-1984 Accuracy of Cylindrical Gear Teeth Tolerance for Errors of Tooth Trace

SE-SIS

• SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

AGMA - American Gear Manufacturers Association

• 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears

American Gear Manufacturers Association

• AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
• AGMA 95FTM3-1995 Effect of Manufacturing Errors on the Predicted Dynamic Factors of Spur Gears

HU-MSZT

• MSZ 7492-1980 Error and error concept of big wheels and saw blades

PT-IPQ

• NP 107-1962 Tolérances et ajustements. Terminologie

Danish Standards Foundation

• DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods

Spanish Association for Standardization (UNE)

• UNE 66051:1978 ESTIMATION OF THE DIFFERENCE OF TWO MEANS (VARIANCES UNKNOWN, BUT MAY BE ASSUMED EQUAL)

Association Francaise de Normalisation

• NF X06-058:1987 Applications of statistics - Estimation of the difference between two means - (variances unknown, but equal).
• NF X06-059:1987 Applications of statistics - Comparison of the difference of two means at a given value - (variances unknown, but equal).

German Institute for Standardization

• DIN 3965-4:1986 Tolerancing of bevel gears; tolerances for shaft angle errors and axes intersection point deviations

IT-UNI

• UNSIDER 17-1956 Quality inspection. Comparison of two statistical series. The significance of the difference between two averages

SCC

• BS 37-3:1953 Electricity meters single phase 2-wire prepayment meters

Defense Logistics Agency

• DLA MIL-DTL-24558/22 B-2011 TERMINAL BOXES, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS, SINGLE-PHASE, SYMBOL NO. 415 - TWO 75 MCM CABLES, SYMBOL NO. 415.1 - TWO 100 MCM CABLES, SYMBOL NO. 415.2 - TWO 125 MCM CABLES, SYMBOL NO. 415.3 - TWO 150 MCM CABLES AND SYMBOL NO. 415.4 - TWO
• DLA SMD-5962-84185 REV E-2011 MICROCIRCUIT, LINEAR, TWO-STAGE DIFFERENTIAL VIDEO AMPLIFIER, MONOLITHIC SILICON
• DLA DSCC-DWG-85009 REV E-2008 DELAY LINES, ACTIVE, TWO DELAY LINES, 14-PIN DIP, TTL INTERFACED

CZ-CSN

• CSN 01 4603 Dil.2-1980 Cylihdrical gears and racks. Terms, definitions and symbols for errors and tolerances

National Electrical Manufacturers Association（NEMA)

• NEMA WC 26-2000 Binational Wire and Cable Packaging Standard EEMAC 201-2000; Errata 11/17/2000; Errata 1/27/2003

Others: Relative error,Curve relative error,relative error curve,Curve relative error,relative error curve,critical relative error,relative error bars,relative margin of error,relative error concept,relative error sign,The relative error of the two lines,relative error sequence,relative error acceptance,Relative Error Judgment,Relative Error Evaluation,method relative error,Relative Error Accuracy,The relative error of the two lines,relative error,relative error sequence