Tested more than 200 million times

Tested more than 200 million times, Total:117 items.

The international standard classification for "Tested more than 200 million times" includes: Non-destructive testing , Other equipment related to power transmission and distribution networks .

The Chinese standard classification for "Tested more than 200 million times" includes: Hydraulic and pneumatic systems and their accessories , Basic standards and general methods , Power semiconductor device and parts .

Taiwan Provincial Standard of the People's Republic of China

CNS 7632-1981 Method of Measuring Voltage Drop on Closed Contacts Where Over 100 Amperes Flow Through the Contacts

未注明发布机构

AS 1141.13:2007/Amdt 1:2016 Methods for sampling and testing aggregates - Material finer than 2 micrometer
AS 1141.13:2007(R2018) Methods for sampling and testing aggregates - Material finer than 2 micrometer

Group Standards of the People's Republic of China

T/CPSS 1010-2023 Requirements for supraharmonics measurement in power system
T/ZSA 96.2-2021 Test methods for dialyzer — Part 2: performance parameters of ultrafiltration coefficient

Professional Standard - Aviation

HB 7669-2016 Single pass test method for aviation hydraulic filters
HB 7669-2000 Test Method of Hydraulic Filter for Aviation

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 30843.2-2014 Variable-frequency drive above 1kV and not exceeding 35kV—Part 2: Test methods
GB/T 19799.2-2005 Non-destructive testing - Ultrasonic testing - Calibration block No.2
GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.2-2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No.2
GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 30177.2-2024 Methods of performance testing for filters—Part 2: Vacuum filter

US-CFR-file

CFR 12-252.17-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.17:Disclos
CFR 12-252.14-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.14:Annual
CFR 12-252.13-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.13:Applica
CFR 12-252.16-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.16:Reports
CFR 12-252.15-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.15:Methodo
CFR 12-252.12-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.12:Definit
CFR 12-252.11-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartB:Company-run stress test requirements for certain U.S. banking organizations with total consolidated assets over $10 billion and less than $50 billion. Section252.11:Authori
CFR 12-252.120-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartL:Company-run stress test requirements for foreign banking organizations and foreign savings and loan holding companies with total consolidated assets over $10 billion but le
CFR 12-252.122-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartL:Company-run stress test requirements for foreign banking organizations and foreign savings and loan holding companies with total consolidated assets over $10 billion but le
CFR 12-252.121-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartL:Company-run stress test requirements for foreign banking organizations and foreign savings and loan holding companies with total consolidated assets over $10 billion but le
CFR 12-252.22-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartC:Risk committee requirement for publicly rraded bank holding companies with total consolidated assets of $10 billion or greater and less than $50 billion. Section252.22:Risk
CFR 12-252.21-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartC:Risk committee requirement for publicly rraded bank holding companies with total consolidated assets of $10 billion or greater and less than $50 billion. Section252.21:Appl
CFR 12-252.157-2014 Banks and banking. Part252:Enhanced prudential standards (regulation YY). SubpartO:Enhanced prudential standards for foreign banking organizations with total consolidated assets of $50 billion or more and combined U.S. assets of $50 billion or more. Secti

SCC

AWWA JTMGT64467 How Do I Inventory and Assess Over One Billion Dollars Worth of Infrastructure as Part of an Asset Management Program?
NS-EN 1069-2:1996 Water slides over 2 m height — Part 2: Instructions
AS 1678.8.0.004:1993 Emergency procedure guide - Transport - Hypochlorite solutions (with more than 5% available chlorine)
CEI EN IEC 61936-2:2024 Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC
AS A46:1943 Tests on thin metal sheet and strip (not exceeding 0.128 inch (10 S.W.G.) in thickness)
AS G5:1961 Specification for hot-forged steel rivets (not exceeding 2 inches in diameter)
AS G6:1961 Specification for cold-forged steel rivets (not exceeding 1/2 inch in diameter)
DIN EN IEC 61936-2 E:2023 Draft Document - Power installations exceeding 1 kV AC and 1.5 kV DC - Part 2: DC (IEC 99/364/CDV:2022); German and English version prEN IEC 61936-2:2022
DIN V DE V 0681-2 E:2013 Draft Document - Live working - Devices for operating, testing and safe-guarding with rated voltages exceeding 1 kV - Part 2: Switching sticks
DANSK DS/EN IEC 62984-2:2020 High-temperature secondary batteries – Part 2: Safety requirements and tests
NS-EN ISO 9094-2:2002 Small craft — Fire protection — Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002)
CEI EN IEC 62984-2:2020 High-temperature secondary batteries Part 2: Safety requirements and tests
BS 2L 116:1985 Specification for tube of 99% aluminium (cold drawn: seamless, not tested hydraulically) (not exceeding 12 mm wall thickness)

International Electrotechnical Commission (IEC)

IEC TR 60871-2/AMD1:1991 Shunt capacitors for a.c. power systems having a rated voltage above 660 V; part 2: endurance testing; amendment 1
IEC 62281:2019/AMD2:2023 Amendment 2 - Safety of primary and secondary lithium cells and batteries during transport

RO-ASRO

STAS 7246/7-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Overspeed test and momentary excess load test
STAS 3686/2-1974 CIRGUIT-BREAKERS FOR ALTER- NAT1NG YOLTAGES ABOVE 1 kV. Methods of tesling during 110-load operations
STAS 3686/3-1974 CIRCUIT-BREAKERS FOR ALTER- NATING VOLTA GES ABOVE 1 kV Methods for testing the [insulation
STAS E 12671-1988 Ultrasonic testing ULTRASON IC CONTROL OF STEEL PIPES
STAS 1564/2-1985 ALTERNATING CURRENT DISCONECTORS FOR VOLTAGES ABOVE 1 KV Rules and methods of test

SE-SIS

SIS SS 11 42 41-1979 Ultrasonic testing — Calibration block No 2

Standard Association of Australia （SAA）

AS 1141.13:2007 Methods for sampling and testing aggregates - Material finer than 2 micrometer

IN-BIS

IS 10867-1984 Specifications for disposable blood sample containers with a capacity not exceeding 25 ml
IS 2516 Parts 1 and 2/Sec.1-1985 Circuit Breaker Specifications Part 1 and 2 Requirements and Tests Section 1: Voltage not exceeding 1000V AC or 1200VDC

Lithuanian Standards Office

LST EN ISO 15792-2:2020 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
LST EN 60931-2-2000 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV. Part 2: Ageing test and destruction test (IEC 60931-2:1995)
LST EN ISO 9094-2:2003 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002)

AT-ON

OENORM EN ISO 15792-2:2021 Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test pieces and specimens in steel (ISO 15792-2:2020)
ONORM EN 27963-1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds
ONORM S 4236-1989 Swimming sports equipment; water slides with over 2 m difference ofheight to the surface; dimensions, safety requirements, testing, marking ofconformity

PL-PKN

PN M69740-1958 Welding -- Break test of flat butt joint more than 4 mm in thickness
PN-EN IEC 62984-2-2020-12 E High-temperature secondary batteries - Part 2: Safety requirements and tests (IEC 62984-2:2020)
PN BN 6191-68-1966 Testing agent. Bismuth subnitrate

CZ-CSN

CSN 72 0104 Cast.2-1973 Determination of water over 110 °C
CSN 72 0104 Cast.1-1973 Determination of water over 110 °C
CSN 63 5203-1985 Testing by static test overpressure

FI-SFS

SFS-IEC 885-1:1989 Test method for electrical conductivity of wires. Not exceeding 450/750V in conductors and wires tested
SFS 5532-1989 The rated voltage of the rubberized cable does not exceed 450/750V. Test Methods
SFS 5522-1989 The rated voltage of PVC-coated insulated cables does not exceed 450/750V. Test Methods

RU-GOST R

GOST 21106.1-1975 Oscillator, modulator and regulation tubes; anode dissipated power more than 25 W. Test method for multiple switching on and switching off the heating voltage
GOST R 57423-2017 Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6,4 MPa to temperatures exceeding 400 °C. Specifications

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM16556-2014 PIN, STRAIGHT, HEADLESS (DOWEL) (.001 OVER NOMINAL SIZE) (Rev 2)
AIA/NAS NASM16555-2014 PIN, STRAIGHT, HEADLESS, DOWEL, .0002 OVER NOMINAL SIZE (Rev 2)

KR-KS

KS B ISO 7963-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
KS V ISO 9094-2-2014(2024) Small craft — Fire protection — Part 2: Craft with a hull length of over 15 m

Japanese Industrial Standards Committee (JISC)

JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules
JIS Z 2345-2:2018 Standard test blocks for ultrasonic testing -- Part 2: A7963 Standard Test Block
JIS Z 2353:2003 Method for measurement on ultrasonic velocity of solid by pulse technique using reference test piece

National Association of Pipe Fabricators (NAPF)

PFI ES-20-2013 WALL THICKNESS MEASUREMENT BY ULTRASONIC EXAMINATION

German Institute for Standardization

DIN VDE V 0681-2:2016 Live working - Devices for operating and testing with nominal voltages exceeding 1 kV - Part 2: Specifications for switching sticks
DIN EN ISO 9094-2:2003 Small craft - Fire protection - Part 2: Craft with a hull length of over than 15 m (ISO 9094-2:2002); German version EN ISO 9094-2:2002
DIN 51813:2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm
DIN EN 1251-2 Berichtigung 1:2007-05 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006

Korean Agency for Technology and Standards (KATS)

KS B ISO 7963:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
KS F 2388-2023 Standard test method for integrity testing of drilled shafts by crosshole ultrasonic logging

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE V 0681-2-2016 Live working - Devices for operating and testing with nominal voltages exceeding 1 kV - Part 2: Specifications for switching sticks

AIA/NAS - Aerospace Industries Association of America Inc.

NASM16555-2014 PIN@ STRAIGHT@ HEADLESS@ DOWEL@ .0002 OVER NOMINAL SIZE (Rev 2)
NASM16556-2014 PIN@ STRAIGHT@ HEADLESS (DOWEL) (.001 OVER NOMINAL SIZE) (Rev 2)

Association Francaise de Normalisation

NF C18-310:1985 Voltage detectors to be used for alternating voltages not exceeding 1 000 V.
NF C58-484-2*NF EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2 : safety requirements and tests
NF C18-311:1986 Unipolar voltage detectors to be used on networks,installations and equipment,for alternating voltages exceeding 1000V and not exceeding 420kV

International Organization for Standardization (ISO)

ISO 621:1981 Manganese ores; Determination of metallic iron content (metallic iron content not exceeding 2 %); Sulphosalicylic acid photometric method
ISO 621:1975 Title missing - Legacy paper document
ISO 834:1975/Amd 2:1980 Fire-resistance test; elements of building construction; amendment 2
ISO 9094-2:2002 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m

SAE - SAE International

SAE J1250-1980 In-Service Brake Performance Test Procedure - Vehicles over 4500 kg (10 000 lb)
SAE J1250-1987 In-Service Brake Performance Test Procedure - Vehicles over 4500 kg (10 000 lb)@ Recommended Practice
SAE J1250-1992 In-Service Brake Performance Test Procedure - Vehicles over 4500 kg (10 000 lb)

Society of Automotive Engineers (SAE)

SAE J1250-2000 In-Service Brake Performance Test Procedure--Vehicles Over 4500 kg (10 000 lb)
SAE J294-2021 Service Brake Structural Integrity Test Procedure Vehicles over 4500 kg (10 000 lb) GVWR
SAE J294-2011 Service Brake Structural Integrity Test Procedure Vehicles over 4500 kg (10 000 lb) GVWR

GOST

GOST R IEC 60695-10-2-2010 Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test

GSO

GSO ASTM D6760:2023 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
BH GSO ASTM D6760:2023 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
GSO ISO 105-C02:2005 Textiles-Tests for colour fastness -part 2:determination of colour fastness to washing – test 2

IT-UNI

UNI 6992-1971 Measuring instruments. Go plug gauges for nominal sizes above 1,5 to 50 mm.
UNI 6993-1971 Measuring instruments go plug gauges for nominal sizes above 50 to 100 mm.
UNI 6994-1971 Measuring instruments. Not go plug gauges for nominal sizes from 1,5 to 50 mm.
UNI 6995-1971 Measuring instruments. Not go plug gauges for nominal sizes above 50 to 100 mm.

Indonesia Standards

SNI IEC 60245-2:2010 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
SNI 19-1058-1989 Ultrasonic test nomenclature

British Standards Institution (BSI)

BS EN ISO 7963:2022 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS 4L 54:1986(2011) Specification for Tube of99 % aluminium — (Cold drawn : seamless : tested hydraulically) (Not exceeding 12 mm wall thickness)

AENOR

UNE-EN 60931-2:1997 SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV. PART 2: AGEING TEST AND DESTRUCTION TEST.

CEN - European Committee for Standardization

EN ISO 9094-2:2002 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m

American Society for Testing and Materials (ASTM)

ASTM C1733-17a Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method
ASTM D6760-14 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests

ZA-SANS

SANS 60227-2:2006 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2: Test methods

ES-UNE

UNE-EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests (Endorsed by Asociación Española de Normalización in June of 2020.)

Danish Standards Foundation

DS/EN ISO 9094-2:2003 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m

Others: Tested more than 200 million times