Forward and reverse switching

Forward and reverse switching, Total:170 items.

The international standard classification for "Forward and reverse switching" includes: Control components , Couplings , Woodworking equipment in general , Woodworking equipment , Other woodworking equipment .

The Chinese standard classification for "Forward and reverse switching" includes: Hydraulic and pneumatic device , Papermaking in general , Chain drive, belt drive and key joint , Clamping fixtures , Tools , Combination grippers , Saw timber, artificial board machinery and tools .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22107-2008 Pneumatic fluid power - Directional control valves - Measurement of shifting time
GB/T 22107-2025 Pneumatic fluid power—Directional control valves—Measurement of shifting time
GB/T 1974-2003 Tangential keys and keyways
GB/T 1974-1980 Tangential keys and keyways
GB 1974-1980 Tangential key and its keyway
GB/T 450-2008 Paper and board－Sampling for testing and identification of machine and cross direction wire side and felt side

Professional Standard - Aviation

HB 2059-1974 Tangential clamp
HB 1281-1987 Square Guide Bearing
HB 3822-1986 Reamer Holder for Inverse-tangent Socket Drill
HB 1378-1984 Tangential round base plate
HB 2682-1976 Rear tool post replaceable cut-off knife and radial turning tool holder
HB 633-1989 Tangential clamp
HB 2342-1976 Tool holder for countersinking countersinking
HB 3499-1985 Inverse Tangent End Face Countersink Drill d=14~40mm
HB 3821-1986 Reamer Holder Used for Inverse-tangent End Face Countersink Drill
HB 633-1974 Tangential clamp
HB 3818-1986 Inverse-tangent Socket Drill for Rivets
HB 2059-1989 Tangential clamp
HB 422-1971 Tangential clamping sleeve

Professional Standard - Machinery

JB/T 10373-2002 Hydraulic fluid power - Solenoid actuated pilot operated directional control valve and hydraulic pilot operated directional control valve
JB/T 10373-2014 Hydraulic Fluid Power-electro-hydraulic Operated and Hydraulic Operated Directional - Control Valve
JB/T 6422-1992 longitudinal slitter
JB/T 12588-2016 Front projection reflective solid screens

Professional Standard - Forestry

LY/T 1470-2016 Longitudinal slicer
LY/T 1470-1999 Longitudinal Veneer Slicer - Parameter
LY/T 1803-2008 Horizontal cross veneer slicer knife
LY/T 1471-1999 Lengthways Veneer Slicer - Accuracy Tests
LY/T 1008-2013 Cross veneer slicer

Taiwan Provincial Standard of the People's Republic of China

CNS 9216-1982 Grooved Pins, Half Length Reverse Grooved

International Electrotechnical Commission (IEC)

IEC TR 60919-2:2008/AMD1:2015 Amendment 1 - Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

Association of German Mechanical Engineers

VDI 2906 Blatt 6-1992 Quality of cut faces of (sheet) metal parts after cutting@ blanking@ trimming or piercing; counter shearing
VDI 2906 BLATT 6-1994 Cutting surface quality when cutting, trimming and punching metal workpieces; counter cutting
VDI-Berichte 1464:1999 Counter-flow laminar heat exchangers are the basic components of a high-efficiency WRG system.

Ente Nazionale Italiano di Unificazione

UNI 7671:1977 Butt welded joints in ferrous metal and nickel alloys. Transverse face and root bend test.
UNI 7515:1976 Tangential keys.
UNI 7515-1976 Tangential keys.
UNI ISO 4859:1988 Wood. Determination of radial and tangential swelling.
UNI ISO 4469:1985 Wood. Determination of radial and tangential shrinkage.
UNI 7671-1977 Head-to-head welding casing made of iron and nickel alloy materials. Front and back transverse bending tests
UNI 7672-1977 Head-to-head welding joints of ferrous materials and nickel alloys. Longitudinal bending test on front and back

Korean Agency for Technology and Standards (KATS)

KS B ISO 9533:2012 Earth-moving machinery-Machine-mounted forward and reverse audible warning alarm-Sound test method
KS B ISO 12238:2005 Pneumatic fluid power-Directional control valves-Measurement of shifting time
KS B ISO 12238:2013 Pneumatic fluid power－Directional control valves－Measurement of shifting time
KS B ISO 9533-2012(2022) Earth-moving machinery－Machine-mounted forward and reverse audible warning alarm－Sound test method
KS B ISO 3117-2003(2018) Tangent key and keyway
KS B ISO 3117-2003(2023) Tangential keys and keyways
KS B ISO 3117:2003 Tangential keys and keyways
KS B ISO 3117-2023 Tangential keys and keyways
KS B 6841-1998 4-way reversing valves for heat pump
KS C 2617-1997(2017) Commutator bars
KS C 2617-2022 Commutator bars

American Water Works Association (AWWA)

AWWA MTC64608 Dewatering Reverse Osmosis Concentrate Using Forward Osmosis

Czech Standards Institute (UNMZ)

CSN ISO 9533:1993 Earth-moving machinery. Machine-mounted forward and reverse audible warning alarm. Sound test method

American Society for Testing and Materials (ASTM)

ASTM D4993-89(2003) Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM D4993-89(1998)e1 Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM E111-04(2010) Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
ASTM E2126-07 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
ASTM D4993-08 Standard Practice for Calculation and Adjustment of Silica (SiO ₂ ) Scaling for Reverse Osmosis
ASTM E2126-05 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Walls for Buildings
ASTM E2126-02 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E808-23 Standard Practice for Describing Retroreflection
ASTM E2126-01 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E2126-02a Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E1709-00e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer

Gosstandart of Russia

GOST 17252-1971 Arbor ends for mounting of countersinks during inverse undercutting. Design and dimensions
GOST 18072-1972 Changeable arbors for tangential cutters for turret automatics. Design and dimensions
GOST 24070-1980 Basic norms of interchangeability. Keyed joints with increased tangent keys. Dimensions of keys and keyways. Tolerances and fits

International Organization for Standardization (ISO)

ISO 12238:2001 Pneumatic fluid power - Directional control valves - Measurement of shifting time
ISO 12238:2023 Pneumatic fluid power — Directional control valves — Measurement of shifting time
ISO 3117:1977 Tangential keys and keyways

Indonesia Standards

SNI 07-6733-2002 Test methods for elasticity of modulus, tangen of modulus, and chord of modulus
SNI 05-2921-1992 Pasak tangensial dan alurnya
SNI IEC/TR 60919-2:2012 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Part 2: Faults and switching

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P802.21b/D05, October 2011 IEEE Draft Standard for Media Independent Handover Services - Amendment: Handovers with Downlink Only Technologies
IEEE P802.21b/D04, June 2011 IEEE Draft Standard for Media Independent Handover Services - Amendment: Handovers with Downlink Only Technologies
IEEE 802.21b/D06, November 2011 IEEE Approved Draft Standard for Media Independent Handover Services - Amendment: Handovers with Downlink Only Technologies
IEEE P802.21b/D06, November 2011 IEEE Approved Draft Standard for Media Independent Handover Services - Amendment: Handovers with Downlink Only Technologies
802.21b/D06, November 2011 IEEE Approved Draft Standard for Media Independent Handover Services - Amendment: Handovers with Downlink Only Technologies
IEEE Std 802.21c-2014 IEEE Standard for Local and metropolitan area networks-- Part 21: Media Independent Handover Services - Amendment 3: Optimized Single Radio Handovers
IEEE P802.21c/D6, August 2013 IEEE Draft Standard for Local and metropolitan area networks -- Part 21: Media Independent Handover Services - Amendment 3: Optimized Single Radio Handovers
IEEE Std 802.21a-2012 IEEE Standard for Local and Metropolitan Area Networks: Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and Protocol
IEEE P802.21c/D7, December 2013 IEEE Draft Standard for Local and metropolitan area networks -- Part 21: Media Independent Handover Services - Amendment 3: Optimized Single Radio Handovers
IEEE 802.21C-2014 Local and metropolitan area networks-Part 21: Media Independent Handover Services Amendment 3: Optimized Single Radio Handovers (IEEE Computer Society)
IEEE 802.21a/D05, October 2011 IEEE Draft Standard for Local and Metropolitan Area Networks: Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and Protocol
IEEE P802.21a/D04, June 2011 IEEE Draft Standard for Local and Metropolitan Area Networks: Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and Protocol
IEEE P802.21d/D7, December 2014 IEEE Draft Standard for Media Independent Handover Services Amendment 4: Multicast Group Management
IEEE Std 802.21b-2012 IEEE Standard for Local and metropolitan area networks - Part 21: Media Independent Handover Services Amendment 2: Extension for Supporting Handovers with Downlink Only Technologies
IEEE P802.21a/D06, November 2011 IEEE Approved Draft Standard for Local and Metropolitan Area Networks: Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and Protocol

British Standards Institution (BSI)

PD IEC TR 60919-2:2008+A2:2020 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Faults and switching
BS PD IEC/TR 60919-2:2008 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Faults and switching

Military Standards (MIL-STD)

MIL MIL-E-1/1058D-1991 ELECTRON TUBE, RADIAL BEAM SWITCHING TYPE 6700 (NO S/S DOCUMENT)
MIL MIL-E-1/1498B-1977 ELECTRON TUBE, RADIAL BEAM SWITCHING TYPE 6710 (NO S/S DOCUMENT) (SUPERSEDING MIL-E-1/1498A)
MIL MIL-E-1/1501B-1976 ELECTRON TUBE, RADIAL BEAM SWITCHING TYPE 6703 (NO S/S DOCUMENT) (SUPERSEDING MIL-E-1/1501A)

Society of Automotive Engineers (SAE)

SAE AIR6064 Reverse Thrust
SAE AS5869 Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 psi
SAE AS5869D FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS5869G FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS5869C Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 psi
SAE AS5869E FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS5869F FITTING ASSEMBLY, UNION, 3 HOLE FLANGE AXIALLY SWAGED, HYDRAULIC 5080 PSI
SAE AS5869A Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 psi
SAE AS5869B Fitting Assembly, Union, 3 Hole Flange, Axially Swaged, Hydraulic, 5080 psi
SAE AIR6064-2018 Reverse Thrust
SAE J/ISO 9533-2003 Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method Identical to ISO 9533:1989; Superseding SAE J1446
SAE AS5767A Fitting Assembly, Tee, Female Flareless on Run, Axially Swaged, Hydraulic, 5,080 psi
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD
SAE J326-1986 Nomenclature Hydraulic Backhoes
SAE J326-1980 Nomenclature - Hydraulic Backhoes
SAE J326-2018 Nomenclature - Hydraulic Backhoes
SAE J326-2012 Nomenclature Hydraulic Backhoes
SAE J326-2020 Nomenclature-Hydraulic Backhoes
SAE AS95234/2A-2023 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS95234/4-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, PANEL MOUNT, FRONT, WITH ACCESSORY THREAD

German Institute for Standardization

DIN 271:1974 Tangential Keys and Tangential Keyways for Constant Loads
DIN ISO 12238:2005-12 Pneumatic fluid power – Directional control valves – Measurement of shifting time
DIN 271:1974-09 Tangential Keys and Tangential Keyways for Constant Loads
DIN 268:1974 Tangential Keys and Tangential Keyways for Alternating Shock Loads
DIN 268:1974-09 Tangential keys and tangential keyways for alternating shock loads
DIN SPEC 50300:2013 Measuring geometries for assessing the night visibility of retroreflective materials with respect to the retroreflective properties
DIN 80701:1991-05 Switching nut
DIN 40713 Beiblatt 3:1975 Graphical symbols, protective appliance examples

International Telecommunication Union (ITU)

ITU-T G.8131/Y.1382 AMD 2-2016 Linear protection switching for MPLS transport profile; Amendment 2
ITU-T G.8031 AMD 1-2018 Ethernet linear protection switching Amendment 1 (Study Group 15)
ITU-T Y.1342 AMD 1-2007 Ethernet linear protection switching Amendment 1 (Study Group 15)
ITU-T Y.1342 AMD 1-2018 Ethernet linear protection switching Amendment 1 (Study Group 15)
ITU-T G.8131/Y.1382 AMD 1-2016 Linear protection switching for MPLS transport profile; Amendment 1
ITU-T Q.86.4-1997 Stage 2 Description for Charging Supplementary Services: International Freephone Service (IFS) - Series Q: Switching and Signalling Functions and Information Flows for Services in the ISDN - Supplementary Services Study Group 11; 22 pp
ITU-T Q.86-1993 Stage 2 Description for Charging Supplementary Services Clause 3 - Reverse Charging (REV) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group XI
ITU-T Q.86-1995 Stage 2 Description for Charging Supplementary Services Clause 7 - International Telecommunication Charge Card (ITCC) - General Recommendations on Telephone Switching and Signalling Functions and Information Flows for Services in the ISDN Study Group 11
ITU-T Y.1720 AMD 1-2008 Protection switching for MPLS networks Amendment 1 Study Group 15
ITU-T G.8131 AMD 2-2016 Linear protection switching for MPLS transport profile Amendment 2 (Study Group 15)
ITU-T G.8131 AMD 3-2018 Linear protection switching for MPLS transport profile Amendment 3 (Study Group 15)
ITU-T Y.1382 AMD 1-2016 Linear protection switching for MPLS transport profile Amendment 1 (Study Group 15)
ITU-T G.8131 AMD 1-2016 Linear protection switching for MPLS transport profile Amendment 1 (Study Group 15)
ITU-T Y.1382 AMD 2-2016 Linear protection switching for MPLS transport profile Amendment 2 (Study Group 15)
ITU-T Y.1382 AMD 3-2018 Linear protection switching for MPLS transport profile Amendment 3 (Study Group 15)

Association Francaise de Normalisation

NF EN 60146-2:2002 Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct DC converters
NF A49-862:1988 Steel tubes. Straightening test on tubular half-ferrule.

Cuban Institute of Standards and Metrology

NC 16-58-1988 Basic Interchangeability Standards. Tangential Keys. Dimensions, Adjustments and Tolerances

Magyar Szabványügyi Testület

MSZ 1410-1976 Longitudinal and transverse cutting machines
MSZ 4455-1968 Cutting tool for cutting square sides of square holes
MNOSZ 18266-1956 Salesman's desk (reverse)

Bureau of Indian Standards

IS 14902-2-2013 Performance of High-Voltage Direct Current (HVDC) Systems with Line - Commutated Converters- Part 2 : Faults and Switching
IS 8160-2023 Tangent Galvanometers-Specification

Danish Standards Foundation

DANSK DS/CLC/TR 60919-2:2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching
DS/CLC/TR 60919-2:2011 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

Internet Engineering Task Force (IETF)

RFC 5496-2009 The Reverse Path Forwarding (RPF) Vector TLV
RFC 7891-2016 Explicit Reverse Path Forwarding (RPF) Vector

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TR 60919-2:2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

Standard Association of Australia （SAA）

AS 1906.3:1992 Retroreflective materials and devices for road traffic control purposes - Raised pavement markers (retroreflective and non-retroreflective)