Waste machine

Waste machine, Total:254 items.

The international standard classification for "Waste machine" includes: Transport exhaust emissions .

The Chinese standard classification for "Waste machine" includes: Pollutants discharge standards for mechanical and electrical industries , Pollutants discharge in general , Discharge standard for mobile pollution sources .

机械工业部

JB/T 7740-1995 Regulations on the discharge of oily wastewater from the machinery industry

Professional Standard - Water Conservancy

SL 510-2011 Standard for abolition of mechanical and electrical equipment of irrigation and drainage pumping station

Professional Standard - Machinery

JB 7740-1995 Regulations on Discharge of Oil-bearing Wastewater in Mechanical Industry

未注明发布机构

DIN EN ISO 18854 E:2013-11 Test bench measurements of gaseous and particulate exhaust emissions from small boat reciprocating internal combustion engines (draft)
ABNT NBR 16898-2020 Light duty road vehicles — Determination of the ammonia at exhaust gas emissions
DIN EN ISO 8178-5:1999 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions

Professional Standard - Environmental Protection

HJ 523-2009 Codes for Wastewater Discharge Direction
HJ 521-2009 Codes for Wastewater Discharging

Professional Standard - Agriculture

GBJ 4-1973 Trial discharge standard for three industrial wastes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.
GB 17691-2001 Limits and measurement methods for exhaust pollutants from compression ignition(C.I.) engines of vehicles
GB 14762-2002 Limits and measurement methods for exhaust emissions from positive ignition (P.I.) engines of vehicles and vehicles equipped with P.I. Engines
GB 20891-2007 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery(I、II)

Group Standards of the People's Republic of China

T/ZGZS 0713-2023 Calculation method of carbon emissions for end-of-life vehicle recycling and dismantling enterprises
T/WHHLW 111-2024 Punch automatic unloading and waste removal device
T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method

Tianjin Provincial Standard of the People's Republic of China

DB12/ 177-2003 Mariculture Wastewater Discharge Standard
DB12/T 229-2005 Freshwater Aquaculture Wastewater Discharge Standard

Zhejiang Provincial Standard of the People's Republic of China

DB33/ 453-2006 Aquaculture Wastewater Discharge Requirements

Hubei Provincial Standard of the People's Republic of China

DB4201/T 546-2018 Freshwater aquaculture wastewater discharge standards

Shaanxi Provincial Standard of the People's Republic of China

DB61/ 308-2003 Discharge Standards for Petroleum Exploitation Wastewater

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 3466-2024 Technical specification for zero discharge of copper smelting wastewater

Hunan Provincial Standard of the People's Republic of China

DB43/ 968-2014 Discharge standard of industrial wastewater thallium pollutant
DB43/ 2426-2022 Discharge Standards for Manganese Pollutants in Industrial Wastewater

Jiangxi Provincial Standard of the People's Republic of China

DB36/ 1149-2019 Discharge standard of industrial wastewater thallium pollutant

Shandong Provincial Standard of the People's Republic of China

DB37/ 006-1991 Discharge Standards of Waste Gas Pollutants in Shandong Province

Guangdong Provincial Standard of the People's Republic of China

DB44/ 1989-2017 Discharge standard of industrial wastewater thallium pollutant

British Standards Institution (BSI)

BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
BS ISO 11042-2:1997 Gas turbines - Exhaust gas emission - Automated emission monitoring
BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
BS ISO 8178-2:2021 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-8:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-7:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
BS ISO 8178-5:2021 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS ISO 8178-3:2019 Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS ISO 8178-8:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine group determination
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS ISO 8178-7:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine family determination
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
BS EN 1306:2018 Inland navigation vessels. Connections for the discharge of waste water

RU-GOST R

GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST 23289-1978 Waste water drain sanitary accessories. General technical requirements
GOST 23289-2016 Waste water drain sanitary accessories. Specifications
GOST R 57063-2016 Resources saving. Waste treatment. Indicators for the environmental impact of waste emissions
GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations

GB-REG

REG 14 CFR PART 34-2012 Fuel venting and exhaust emission requirements for turbine engine powered airplanes
REG 40 CFR PART 600-2011 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

International Organization for Standardization (ISO)

ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin
ISO 8178-5:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions

SCC

BS EN ISO 8178-2:1997 Reciprocating internal combustion engines. Exhaust emission measurement-Measurement of gaseous and particulate exhaust emissions at site
BS EN ISO 8178-1:1996 Reciprocating internal combustion engines. Exhaust emission measurement-Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-8:1996 Reciprocating internal combustion engines. Exhaust emission measurement-Engine group determination
DANSK DS/EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-7:1996 Reciprocating internal combustion engines. Exhaust emission measurement-Engine family determination
BS EN ISO 8178-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement-Test fuels
NS-EN ISO 8178-2:1996 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996)
AENOR UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN ISO 8178-2:1997 RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS AT SITE (ISO 8178-2:1996).
NS-EN ISO 18854:2015 Small craft — Reciprocating internal combustion engines exhaust emission measurement — Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
NS-EN ISO 8178-1:1996 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996)
UNE-EN ISO 8178-1:1997 RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS. (ISO 8178-1:1996).
VDI 2301-1993 Reduction of emissions; incineration of waste from hospitals and other health care facilities
CAN/CSA-B602-2005(R2010) Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
CAN/CSA-B602-1999(R2004) Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
CAN/CSA-B602-M90-1990 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
CSA B602-1999 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
CSA B602-M1988-1988 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe
DIN EN ISO 18854 E:2013 Draft Document - Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO/DIS 18854:2013); German version prEN ISO 18854:2013
07/30113186 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-9:2000 Reciprocating internal combustion engines. Exhaust emission measurement-Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-10:2002 Reciprocating internal combustion engines. Exhaust emission measurement-Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS EN ISO 8178-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement-Test cycles for different engine applications
AS 2888.7:1986 Methods of testing plastics waste outlets, Method 7: Method for testing the seal of plastics waste outlets
VDI 3862 BLATT 8-2015 Measuring gaseous emissions — Measuring formaldehyde in the exhaust gases of combustion engines — FTIR method
VDI 3460 BLATT 2-2014 Emissions reduction — Thermal waste treatment — Energy conversion
VDI 3481 BLATT 2-1998 Measuring gaseous emissions — Determination of organically bound carbon in exhaust gases that can be detected by adsorption on silica gel
04/30118827 DC EN 15012. Soil and waste discharge. Plastics piping systems. Soil and waste discharge systems within the building structure
VDI 3862 BLATT 8-2015 Measuring gaseous emissions — Measuring formaldehyde in the exhaust gases of combustion engines — FTIR method
DANSK DS/EN 1306:2018 Inland navigation vessels – Connections for the discharge of waste water
NS-EN 1306:1996 Inland navigation vessels — Connections for the discharge of waste water
UNE-CWA 16060:2010 IN Environmental technology verification - Air emission abatement technologies
AENOR UNE-EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water

Association Francaise de Normalisation

NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF ISO 8178-9:2019 Reciprocating internal combustion engines - Measurement of exhaust gas emissions - Part 9: test cycles and procedures for the measurement on a test bench of exhaust gas emissions from reciprocating combustion engines...
NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
NF ISO 8178-2:2022 Reciprocating internal combustion engines - Measurement of exhaust gas emissions - Part 2: measurement of gas and particle emissions on site
NF E37-211-8*NF ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8 : engine group determination
NF E37-211-8:1999 Reciprocating internal combustion engines. Exhaust emission measurement. Part 8 : engine group determination.
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF ISO 8178-5:2021 Reciprocating internal combustion engines - Measurement of exhaust gas emissions - Part 5: test fuels
NF E37-211-5*NF ISO 8178-5:2021 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels
NF E37-211-7:1999 Reciprocating internal combustion engines. Exhaust emission measurement. Part 7 : engine family determination.
NF E37-211-7*NF ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7 : engine family determination
NF E37-211-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.
NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
NF ISO 8178-8:2015 Reciprocating internal combustion engines - Measurement of exhaust gas emissions - Part 8: determination of engine groups
NF ISO 8178-7:2015 Reciprocating internal combustion engines - Measurement of exhaust gas emissions - Part 7: determination of engine families
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
CWA 16060:2009 Environmental technology verification - Air emission abatement technologies

Korean Agency for Technology and Standards (KATS)

KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2-2020 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS B ISO 8178-1-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 1: Test-bed measurement of gaseous an d particulate exhaust emission
KS R ISO 8178-1-2023 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS B ISO 8178-11:2008 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS B ISO 8178-2-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 2: measurement of gaseous and particulate exhaust emissions at site 22
KS R ISO 8178-2-2023 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1-2020 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 8178-8-2010 Riciprocating internal combustion engines -- Exhaust emission measurement -- Part 8 : Engine group determination
KS R ISO 8178-8:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS B ISO 8178-11-2023 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS R ISO 8178-7-2023 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-8-2023 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS B ISO 8178-7-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 7:Engine family determanation
KS R ISO 8178-7:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 16185-2021 Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 16185-2006(2021) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 16185-2006(2016) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 8178-5-2023 Reciprocating internal combustion engines－Exhaust emission measurement－Part 5：Test fuels
KS B ISO 8178-5-2010 Reciprocating internal combustion engines ㅡ Exhaust emission measurement ― Part 5: Test fuels
KS B ISO 8178-10-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS R ISO 8178-9-2023 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS R ISO 8178-10-2019 Reciprocating internal combustion engines－Exhaust emission measurement－Part 10：Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
KS B ISO 8178-9-2010 Reciprocating interal combustion engines-- Exhaust emission measurement--Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

GSO

GSO ISO 11042-2:2015 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
BH GSO ISO 11042-2:2017 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
BH GSO ISO 8178-1:2016 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
OS GSO ISO 8178-2:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
GSO ISO 8178-2:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
BH GSO ISO 8178-2:2016 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
GSO ISO 8178-1:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
OS GSO ISO 8178-8:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
GSO ISO 8178-8:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
GSO ISO 8178-11:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BH GSO ISO 8178-5:2016 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
GSO ISO 8178-7:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
BH GSO ISO 8178-7:2016 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
GSO ISO 16185:2013 Road vehicles -- Engine families for certification of heavy-duty vehicles by Exhaust emission
GSO ISO 8178-10:2013 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
OS GSO ISO 8178-9:2014 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
OS GSO ISO 16185:2013 Road vehicles -- Engine families for certification of heavy-duty vehicles by Exhaust emission

Federal Aviation Administration (FAA)

FAA 14 CFR PART 34-2011 Fuel venting and exhaust emission requirements for turbine engine powered airplanes

IX-UIC

UIC O 624-2012 Exhaust emission tests for diesel traction engines

American Society of Mechanical Engineers (ASME)

ASME B133.9-1994(R2001) Measurement of Exhaust Emissions from Stationary Gas Turbine Engines
ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines

Japanese Industrial Standards Committee (JISC)

JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
JIS B 8008-7:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
JIS B 8008-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Test report
JIS B 8008-5:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-5:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions

KR-KS

KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-1-2018(2023) Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS R ISO 8178-2-2018(2023) Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS R ISO 8178-8-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-7-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination

American Bureau of Shipping

ABS 204-2013 GUIDE FOR EXHAUST EMISSION ABATEMENT

ABS - American Bureau of Shipping

ABS 204 CORR-2017 GUIDE FOR EXHAUST EMISSION ABATEMENT
ABS 204-2018 GUIDE FOR EXHAUST EMISSION ABATEMENT
ABS 204 NOTICE 1-2017 GUIDE FOR EXHAUST EMISSION ABATEMENT

ES-UNE

UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water

German Institute for Standardization

DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN EN 1306:2018-05 Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:2018

VDI - Verein Deutscher Ingenieure

VDI 3460-2002 Emission control - Thermal treatment of waste
VDI 3460 Blatt 1-2012 Emission control - Thermal treatment of waste
VDI 3460-1997 Emission control - Thermal treatment of waste
VDI 3460-2001 Emissionsminderung - Thermische Abfallbehandlung
VDI 3460 BLATT 1-2014 Emissionsminderung - Thermische Abfallbehandlung - Grundlagen
VDI 3460-1996 Emissionsminderung - Thermische Abfallbehandlung
VDI 3862 Blatt 8-2014 Messen gasfoermiger Emissionen - Messen von Formaldehyd im Abgas von Verbrennungsmotoren - FTIR-Verfahren
VDI 3475 BLATT 6-2019 Emissionsminderung - Anlagen zur biologischen Abfallbehandlung - Kompostierung

VN-TCVN

TCVN 5945-2005 Industrial waste water.Discharge standards
TCVN 5945-2010 Industrial waste water.Discharge standards
TCVN 7382-2004 Water quality.Hospital waste water.Discharged standards

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 600-2010 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

US-CFR-file

CFR 14-34.23-2013 Aeronautics and Space. Part34:Fuel venting and exhaust emission requirements for turbine engine powered airplanes. Section34.23:Exhaust emission standards for engines manufactured on and after july 18, 2012.

HU-MSZT

MSZ 21869/3-1981 Railway locomotive diesel engine exhaust gas detection, carbon monoxide emission content

Association of German Mechanical Engineers

VDI 3475 Blatt 3-2006 Emission control - Mechnical-biological treatment facilities for municipal solid waste

API - American Petroleum Institute

API PUBL 841-44700-1988 EXHAUST BENZENE EMISSIONS FROM LATE MODEL VEHICLES
API PUBL 4603-1994 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
API PUBL 4680-1998 Amine Unit Air Emissions Model Evaluation
API PUBL 931-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS AND VOLUME ON LIQUID WASTES

GOSTR

GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels

SAE - SAE International

SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement

Society of Automotive Engineers (SAE)

SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE AIR1312-2002 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS

TR-TSE

TS 327-1978 Drains Forwaste Water Of Cast Iron With Lamellare Graphite

Danish Standards Foundation

DS/INF 161:2004 Plastics pipes - Soil and waste discharge, sewerage and drainage - Glossary of terms
DS/CWA 16060:2010 Environmental technology verification - Air emission abatement technologies
DS/EN 1306:1997 Inland navigation vessels. Connections for the discharge of waste water
DS 432:2009 Code of Practice for Sanitary Drainage - Wastewater Installations

US-FCR

FCR UFGS-23 35 00.00 10-2009 OVERHEAD VEHICLE TAILPIPE [AND WELDING FUME] EXHAUST REMOVAL SYSTEM(S)

Canadian Standards Association (CSA)

CSA B602-2020 Mechanical couplings for drain, waste, and vent pipe and sewer pipe
CSA B602-2016 +Errata-2017 Mechanical couplings for drain, waste, and vent pipe and sewer pipe
CSA B602-99-CAN/CSA-1999 Mechanical Couplings for Drain, Waste, and Vent Pipe and Sewer Pipe Third Edition; General Instruction No 1; Update No 3

American Society for Testing and Materials (ASTM)

ASTM D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

NL-NEN

NEN 7008-1972 P? pipes for soil and waste purposes

Standard Association of Australia （SAA）

AS 2237:1979 Plastics fuel and emission control tube

Indonesia Standards

SNI 7117.20-2009 Exhaust Emission Stationary Sources Section 20:: Testing

American National Standards Institute （ANSI)

ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement

Others: Principle of soil dumper,machine row,Waste machine,Grate machine