Power Temperature Enthalpy
Power Temperature Enthalpy, Total:47 items.
The international standard classification for "Power Temperature Enthalpy" includes: Plastics in general , Gears .
The Chinese standard classification for "Power Temperature Enthalpy" includes: Basic standards and general methods for synthetic resin and plastic , Gear and gear drive .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 19466.3-2004 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystalliation
- GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- GB/Z 22559.1-2008 Gear - Thermal capacity - Part 1: Rating gear drives with thermal equilibrium at 95℃sump temperature
Professional Standard - Electron
- SJ 1721-1981 Measurement of frequency temperaturre coefficient of power klystrons
未注明发布机构
- DIN EN ISO 11357-3 E:2012-07 Differential Scanning Calorimetry (DSC) for Plastics Part 3: Determination of Melting and Crystallization Enthalpies and Temperatures (Draft)
- DIN EN ISO 11357-3 E:2017-05 Differential Scanning Calorimetry (DSC) for Plastics Part 3: Determination of Melting and Crystallization Enthalpies and Temperatures (Draft)
British Standards Institution (BSI)
- BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
- BS EN ISO 11357-3:2018 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
- BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- 22/30397422 DC BS ISO 24087. Vulcanized rubbers. Differential scanning calorimetry (DSC). Determination of the glass transition temperature and enthalpy
- BS EN 61853-1:2011 Photovoltaic (PV) module performance testing and energy rating. Irradiance and temperature performance measurements and power rating
Association Francaise de Normalisation
- NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
- NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
International Electrotechnical Commission (IEC)
- IEC PAS 62206:2000 Power and temperature cycling
American Society for Testing and Materials (ASTM)
- ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
- ASTM E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-11 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
GOSTR
- GOST R 8.987-2020 State system for ensuriug the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients) over a temperature ran
- GOST R 8.986-2020 State system for ensuring the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients)over a temperature ra
- GOST R 8.951-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Dodecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
- GOST R 8.947-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Undecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
- GOST R 8.946-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Tridecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature rang
IEC - International Electrotechnical Commission
- PAS 62206-2000 Power and Temperature Cycling (Edition 1.0)
SCC
- BS ISO 11357-3:2011 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
RU-GOST R
- GOST R 56724-2015 Plastics. Differential scanning calorimetry (DSC). Part 3. Determination of temperature and enthalpy of melting and crystallization
- GOST R IEC 61853-1-2013 Photovoltaic modules. Determination of performance testing and energy rating. Part 1. Irradiance and temperature performance measurement according to irradiance and temperature. Power rating
KR-KS
- KS M ISO 11357-3-2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
- KS M ISO 11357-3-2018(2023) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
European Committee for Standardization (CEN)
- EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
Korean Agency for Technology and Standards (KATS)
- KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
- KS M ISO 11357-3:2018 Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
- KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
International Organization for Standardization (ISO)
- ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
- ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
Danish Standards Foundation
- DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.
- ASHRAE LO-09-070-2009 Functional Exergy Efficiency at Near-Environmental Temperatures
- ASHRAE 4431-2001 Effect of 1997 Handbook Summer Design Temperature Specifications on Enthalpy and Humidity Ratio
American National Standards Institute （ANSI)
- BS ISO 24087:2023 Rubber, vulcanized. Determination of the glass transition temperature and enthalpy by differential scanning calorimetry (British Standard)
GSO
- GSO ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
