Strength of k9 glass

Strength of k9 glass, Total:379 items.

The international standard classification for "Strength of k9 glass" includes: Hulls and their structure elements , Raw materials and raw glass , Reinforced plastics , Products in fibre-reinforced cement , Structures of buildings , Glass products , Doors and windows , Sewage water , Temperature-measuring instruments .

The Chinese standard classification for "Strength of k9 glass" includes: Ship theory and model test , Ceramic and glass in general , Electrical insulating material and its products , Fibre reinforced composites , Cement , Industrial technical glass , Non-metal chemical machinery equipment , Vessel materials and their inspection methods , Plastic components and accessorie , Technical Management , Physical pollution control standards , Temperature and pressure instrument .

Professional Standard-Ships

CB 1200.2-1988 Strength Calculation for Component Parts of Glass Fibre Reinforced Plastic Sandwich Plate
CB 1200.1-1988 Strength Calculation for Component Parts of Glass Fibre Reinforced Plastic Monolayer Structure

Taiwan Provincial Standard of the People's Republic of China

CNS 2217-1985 Tempered Glasses
CNS 13762-2004 Tempered glass 360°retroreflective roadmarkers
CNS 12785-1990 Method of Test for Barcol Hardness of Glass Fiber Reinforced Plastics
CNS 12782-1990 Method of Test for Apparent Interlaminal Shear Strength of Glass Fiber Reinforced Plastics
CNS 2218-1985 Method of Test for Tempered Glasses
CNS 13447-1994 Heat - Strengthened Flat Glass

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13096.3-1991 Test method for inplane shear strength of pultruded glass fiber reinforced plastic rods
GB/T 15231.1-1994 Test methods for the properties of glass fibre reinforced cement. The volume density, water content and glass fibre content
GB/T 1450.2-1983 Test method for the punch-type of strength of glass fiber-reinforced plastics
GB/T 37781-2019 Test methods for bending strength of glass
GB/T 34328-2017(英文版) Iight weight thermally strengthened glass
GB/Z 21213-2007 High strength laminated sheet based on halongen-free flame-resistant resins and glass cloth
GB/T 14206-1993 Glass fiber reinforced polyester corrugated panels
GB/T 7991.9-2014 Test method of viterous and porcelain enamels―Part 9:Determination of adhesion tensile strength
GB/T 1450.1-1983 Test method for interlaminar shear strength of glass fiber-reinforced plastics
GB/T 15231.2-1994 Test methods for the properties of glass fibre reinforced cement. The compressive strength
GB/T 34328-2017 Light weight thermally strengthened glass
GB/T 42923-2023 Glass-fibre-reinforced plastic products―Determination of fibre length
GB/T 4944-2005 Test method for interlaminar tensile strength of glass fiber reinforced plastic laminates
GB/T 4944-1996 Test method for interlaminar tensile strength of textile glass reinforced plastic laminates

Professional Standard - Building Materials

JC/T 2285-2014 Test method for isostatic compression strength(microspheres-gas compression)for hollow glass microspheres
JC/T 676-1997 Test method for flexure of glass material

Professional Standard - Construction Industry

JG/T 186-2006 Fiberglass reinforced plastic windows
JG/T 185-2006 Fiberglass reinforced plastic doors

Professional Standard - Electron

SJ/T 11034-1996 Test method for d.c. disruptive strength of electronic glass
SJ/T 11041-1996 Test method for impact resistance of electronic glass

Military Standard of the People's Republic of China-General Armament Department

GJB 84A-1997 Specification for high strength fiberglass cloth
GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference
GJB 84B-2020 Specification for high strength fiberglass cloth
GJB 1798-1993 Test method for static pressure damage resistance of aircraft glass
GJB 83-1986 High-strength glass fiber yarn (S glass fiber yarn)
GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
GJB 83A-2018 Specification for high strength fiberglass yarn
GJB 84-1986 High-strength fiberglass cloth (S fiberglass cloth)
GJB 83A-2004 Specification for high strength fiberglass yarn

Group Standards of the People's Republic of China

T/CECS 10350-2023 High strength light glass fiber reinforced plastic cover for deodorization

未注明发布机构

JIS K 7060:1987 Testing Method for Barcol Hardness of Glass Fiber Reinforced Plastics
JIS R 3417:1984 Woven Roving Glass Fabrics
JIS K 7058:1987 Testing Method for Transverse Shear Strength of Glass Fiber Reinforced Plastics

Professional Standard - Machinery

JB/T 9262-1999 Liquid-in-glass industrial thermometers and laboratorial thermometers

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 84B-2007 Specification for high strength glass fabrics
GJB 5872-2006 Test method for laminar shearing strength of stretched acrylic plastic

Professional Standard - Chemical Industry

HG/T 2058.1~2058.2-2016 Glass-lined thermowell

British Standards Institution (BSI)

BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS ISO/TS 12928:1999 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
07/30046996 DC BS ISO 1288-4. Glazing in building. Determination of the bending strength of glass. Part 4. Testing of channel shaped glass
07/30046980 DC BS ISO 1288-1. Glazing in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
14/30288714 DC BS EN ISO 1288-4. Glass in building. Determination of the bending strength of glass. Part 4. Testing of channel-shaped glass
14/30288705 DC BS EN ISO 1288-1. Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
BS ISO 3342:2011 Textile glass. Mats. Determination of tensile breaking force
BS EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Test with specimen supported at two points (four point bending)
BS ISO 22509:2020 Glass in building — Heat strengthened soda lime silicate glass
BS EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with large test surface areas
BS EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Coaxial double ring test on flat specimens with small test surface areas
BS EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
18/30379293 DC BS ISO 22509. Glass in building. Heat strengthened soda lime silicate glass
BS EN 12603:2003 Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
BS EN 2377:1989(2000) Glass fibre reinforced plastics — Test method — Determination of apparent interlaminar shear strength
BS ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
BS ISO 23013:2016 Road vehicles. Determination of resistance to forced entry of security glass constructions used in vehicle glazing. Test of glazing systems
BS EN 1863-1:2011 Glass in building. Heat strengthened soda lime silicate glass. Definition and description
BS EN 1863-1:2000 Glass in buildings - Heat strengthened soda lime silicate glass - Definition and description
23/30464394 DC BS ISO 22314. Plastics. Glass-fibre-reinforced products. Determination of fibre length
BS ISO 4795:1997 Laboratory glassware - Glass for thermometer bulbs
BS ISO 4795:1996 Laboratory glassware. Glass for thermometer bulbs
BS EN 2377:1989 Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength
BS EN 1863-2:2004 Glass in building - Heat strengthened soda lime silicate glass - Evaluation of conformity - Product standard
BS ISO 7685:2019 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of initial ring stiffness
07/30046990 DC BS ISO 1288-3. Glazing in building. Determination of the bending strength of glass. Part 3. Test with specimen supported at two points (four point bending)
BS EN 12337-1:2000 Glass in building - Chemically strengthened soda lime silicate glass - Definition and description
BS DD IEC/PAS 61747-5-3:2007 Liquid crystal display devices-Glass strength and reliability measurement method

Ente Nazionale Italiano di Unificazione

UNI EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
UNI EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
UNI 9302:1988 Glass containers. Determination of impact resistance.
UNI EN 16612:2019 Glass in building - Determination of the lateral load resistance of glass panes by calculation
UNI 9413:1989 Textile glass for the reinforcement of plastics. Determination of moisture content.
UNI 9739:1990 Textile glass reinforced plastics. Composites in the form of rods made from textile glass rovings. Determination of flexural (cross- breaking) strenght.
UNI 9410:1989 Textile glass. Roving for the reinforcement of plastics. Determination of stiffness.
UNI 7499:1975 Tests on glass. Spectrophotometric measurement of glass colour.
UNI EN 572-3:2012 Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
UNI EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
UNI EN 1288-2:2001 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
UNI EN 572-6:2012 Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
UNI EN 59:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor.
UNI EN ISO 9163:2001 Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated.
UNI 7674:1990 Vitreous enamels inorganic protective coatings. Determination of the thermal shock resistance.
UNI EN 410:2011 Glass in building - Determination of luminous and solar characteristics of glazing
UNI EN 60:1977 Glass reinforced plastics. Determination of the loss on ignition.

Danish Standards Foundation

DS/INSTA 154:1987 Security glazings and safety glazings. Classification of resistance
DANSK DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DANSK DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
DANSK DS/EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
DANSK DS/ISO 22509:2020 Glass in building – Heat strengthened soda lime silicate glass
DANSK DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DS/EN 1288-3:2001 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
DANSK DS/EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
DANSK DS/EN 1288-5:2001 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
DANSK DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN 1288-2:2001 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas

Swedish Institute for Standards

SS-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass�
SS-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
SS-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
SS-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ASTM D3914-08 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

Standards Norway

NS-EN 1288-4:2000 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
NS-EN 1288-1:2000 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
NS-EN 12603:2002 Glass in building — Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
NS-EN 59:2016 Glass reinforced plastics — Determination of indentation hardness by means of a Barcol hardness tester
NS-EN 1288-3:2000 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
NS-EN 59:1977 Glass reinforced plastics — Measurement of hardness by means of a Barcol impressor
NS-EN 1288-2:2000 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double ring test on flat specimens with large test surface areas
NS-EN 1288-5:2000 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas

German Institute for Standardization

DIN EN 1288-4:2000-09 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 / Note: To be replaced by DIN EN ISO 1288-4 (2007-10).
DIN EN 1288-1:2000-09 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 / Note: To be replaced by DIN EN ISO 1288-1 (2007-10).
DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
DIN EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000
DIN EN ISO 1288-4 E:2007 Draft Document - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass (ISO/DIS 1288-4:2007); German version prEN ISO 1288-4:2007
DIN EN ISO 1288-4 E:2007-10 Draft Document - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass (ISO/DIS 1288-4:2007); German version prEN ISO 1288-4:2007
DIN EN 12603:2003-04 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
DIN EN ISO 1288-1 E:2007 Draft Document - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2007); German version prEN ISO 1288-1:2007
DIN EN ISO 1288-1 E:2007-10 Draft Document - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass (ISO/DIS 1288-1:2007); German version prEN ISO 1288-1:2007
DIN EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000
DIN EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000
DIN 53766-1:1991 Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength
DIN EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 1288-3:2000-09 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000 / Note: To be replaced by DIN EN ISO 1288-3 (2007-10).
DIN 52230:2004 Determination of resistance to forced entry of safety glass constructions used in vehicle glazing - Test of glazing systems
DIN 61853-2:1987-04 Textile glass; textile glass mats for plastics reinforcement; classification and application
DIN ISO 9385:1991 Glass and glass-ceramics; Knoop hardness test; identical with ISO 9385:1990
DIN EN 1288-2:2000-09 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 / Note: To be replaced by DIN EN ISO 1288-2 (2007-10).
DIN EN 59 E:2015 Draft Document - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version prEN 59:2015
DIN EN 1288-5:2000-09 Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas; German version EN 1288-5:2000 / Note: To be replaced by DIN EN ISO 1288-5 (2007-10).
DIN 53390:1988 Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars
DIN 61853-1:1987-04 Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions
DIN EN 2377:1989 Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989
DIN ISO 23013:2017-10 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems (ISO 23013:2016)
DIN 53769-1:1988-11 Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN 52313:1978 Testing of glass; determination of the resistance of glass products to thermal shock
DIN ISO 23013 E:2016-10 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems
DIN EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending); German version EN 1288-3:2000
DIN 61853-2:1987 Textile glass; textile glass mats for plastics reinforcement; classification and application
DIN EN 59:1977 Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor

GCC Standardization Organization

GSO ISO 1288-4:2021 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
GSO ISO 1288-1:2021 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
GSO ISO 3342:2015 Textile glass -- Mats -- Determination of tensile breaking force
GSO ISO 22314:2013 Plastics - Glass-fibre-reinforced products - Determination of fibre length
GSO ISO 1288-3:2021 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
GSO ISO 1288-2:2021 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas
GSO ISO 9385:2021 Glass and glass-ceramics — Knoop hardness test
GSO ISO 1288-5:2021 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas
GSO ASTM D3517:2016 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

Spanish Association for Standardization (UNE)

AENOR UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
AENOR UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
AENOR UNE 43023:1953 GLASS. SAFETY GLASS. INFLUENCE OF HUMIDITY ON LAMINAR GLASS
AENOR UNE-EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
UNE 43 023 Glass. Safety glass, effect of humidity on pressed glass
AENOR UNE 43021:1953 GLASS. SAFETY GLASS. BREAKAGE DUE TO THE IMPACT OF A BALL ON REINFORCED GLASS
AENOR UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE 43 009 Glass. Flat glass, safety test of flat glass, flatness test
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
UNE-EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
UNE 43 017 Glass. Safety glass, impact resistance of a ball on safety glass at normal temperatures
UNE 43 018 Glass. Safety glass, breakage by impact of a ball on safety glass at normal temperatures

European Committee for Standardization (CEN)

EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 12603:2002 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 1288-3:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 3: Test with Specimen Supported at Two Points (Four Point Bending)
EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
EN 59:1977 Glass Reinforced Plastics: Measurement of Hardness by Means of a Barcol Impressor
EN 1288-2:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 2: Coaxial Double Ring Test on Flat Specimens with Large Test Surface Areas

Japanese Industrial Standards Committee (JISC)

JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass
JIS R 3222:2023 Heat strengthened glass
JIS R 3222:1996 Heat-strengthened glass
JIS K 7058:1995 Testing method for transverse shear strength of glass fiber reinforced plastics
JIS K 7057:1995 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
JIS K 7061:1992 Testing method for charpy impact strength of glass fiber reinforced plastics
JIS K 7062:1992 Testing method for izod impact strength of glass fiber reinforced plastics
JIS K 7060:1995 Testing method for barcol hardness of glass fiber reinforced plastics
JIS R 3111-3:2022 Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending)
JIS B 7414:2018 Glass thermometers
JIS R 3111-5:2023 Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas
JIS A 5350:1991 Fiberglass reinforced plastic mortar pipes

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 1288-1:2022 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
BH GSO ISO 1288-4:2022 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
BH GSO ISO 12543-4:2024 Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability
BH GSO ISO 22314:2016 Plastics - Glass-fibre-reinforced products - Determination of fibre length
BH GSO ISO 1288-3:2022 Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)
BH GSO ISO 9385:2022 Glass and glass-ceramics — Knoop hardness test
BH GSO ISO 1288-2:2022 Glass in building — Determination of the bending strength of glass — Part 2: Coaxial double-ring test on flat specimens with large test surface areas
BH GSO ISO 1288-5:2022 Glass in building — Determination of the bending strength of glass — Part 5: Coaxial double ring test on flat specimens with small test surface areas
BH GSO ASTM D3517:2017 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

Lithuanian Standards Office

LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
LST EN 12603-2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
LST EN 1288-3-2002 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 1288-2-2002 Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas

International Organization for Standardization (ISO)

ISO 1288-4:2016 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
ISO 22509:2020 Glass in building — Heat strengthened soda lime silicate glass
ISO 3605:1978 Textile glass reinforced plastics — Composites in the form of rods made from textile glass rovings — Determination of compressive strength
ISO/PRF 22314:2022 Plastics — Glass-fibre-reinforced products — Determination of fibre length
ISO/DIS 22314:2023 Plastics — Glass-fibre-reinforced products — Determination of fibre length
ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
ISO 1288-3:2016 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
ISO 22314:2006 Plastics - Glass-fibre-reinforced products - Determination of fibre length
ISO 3597:1977 Textile glass reinforced plastics; Composites in the form of rods made from textile glass rovings; Determination of flexural (cross-breaking) strength
ISO 23013:2016 Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems
ISO 9385:1990 Glass and glass-ceramics; Knoop hardness test
ISO 4795:1996 Glass for thermometer bulbs

PL-PKN

PN S13062-1966 Determina?ion of compressive s?reng?h of glass

Association Francaise de Normalisation

NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P84-312:1981 Waterproofing . High-strength flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
NF P78-401:1988 Glass and glazing. Glazing resistance to firearm projectiles. Shooting test on glazing.
NF EN 12603:2003 Glass in Construction - Good-of-Fit Procedures and Confidence Intervals of Glass Strength Data Using Weibull's Law
NF P78-224*NF EN 12603:2003 Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data.
NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
NF EN 572-7:2013 Glass in construction - Basic products: soda-lime silicate glass - Part 7: reinforced or unreinforced profiled glass
NF EN 572-6:2013 Glass in construction - Commodities: soda-lime silicate glass - Part 6: reinforced printed glass
NF EN 59:2016 Glass-reinforced plastics - Determination of penetration hardness using a Barcol hardness tester
NF H35-078:2016 Bottling industry - Glass bottles for carbonated beverages - Mechanical strength
NF P84-311:1981 Waterproofing . Flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
NF ISO 9385:1991 Glass and glass ceramics - Knoop hardness test
NF P78-343*NF EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3 : test with specimen supported at two points (four points bending).
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF S10-015*NF ISO 9385:1991 Glass and glass ceramics. Knoop hardness test D.
NF EN 17146:2018 Determination of strength of glazing supports (infill panels) - Test method and requirements
NF P78-342*NF EN 1288-2:2000 Glass in building - Determination fo bending strength of glass - Part 2 : coaxial double ring test on flat specimens with large test surface areas
NF P78-345*NF EN 1288-5:2000 Glass in building - Determination of the bending strength of glass - Part 5 : coaxial double ring test on flat specimens with small test surface areas.

Gosstandart of Russia

GOST 32281.1-2013 Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
GOST 32298-2013 Glass and glass products. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
GOST 32281.3-2013 Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST R 57963-2017 Hollow glass microspheres. Method for determination of compressive strength
GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
GOST 32281.5-2013 Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with small test surface areas
GOST 32281.2-2013 Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with large test surface areas
GOST ISO 9385-2013 Glass and glass products. Hardness determination method
GOST 33087-2014 Heat strengthened glass. Specifications

GM North America

GM GM9077P-1988 Glass Content of Glass Reinforced Plastics
GM GM9193P-1992 Procedure Determining the Bond Strength of Fiberglass
GM GMP.PA66.070R-1997 Nylon 66 - 25% Glass Sphere, 15% Glass Fiber Reinforced Replaced by GMP.PA66.070
GM GMP.PA66.070-1990 Nylon 66 - 25% Glass Sphere, 15% Glass Fiber Reinforced Replaced by GMP.PA66.070R
GM GMP.PBTP.006-1994 PBTP - 15% Glass Fiber Reinforced
GM GMP.PBT+ASA.001-1999 PBT+ASA - 20% Glass Fiber Reinforced
GM GMP.UP.003-1993 Polyester SMC - Low Profile, 27.5% Glass Reinforced (Revision B)
GM GMP.PP.019-1993 Polypropylene - 30% Glass Reinforced, Continuous Strand Sheet

RO-ASRO

STAS 11268-1979 GLASS FIBRE REINFORCED PLASTICS Determination of tensile strength
STAS 949-1986 REINFORCED GLASSES
SR 949-1994 Reinforced glasses
STAS SR ISO 9385:1990 KNoop hardness test for glass and ceramic glass
STAS 3834-1983 Laboratory glasswere NON GRADUATED GLASS TUBES

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.1.420-1975 Analysis of Glass Fabrics for Breaking Strength; (Tentative)

IT-UNI

UNI 5306-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass at temperature ≥100℃
UNI 7403-1975 Technology, pharmaceutical and sanitary glass products. Chemical strength of glassy enamel
UNI 5302-1963 Glass products for technology and hygiene. Determination of hydrolytic strength of glass powder at 100°C
UNI 5305-1963 Glass products for technology and hygiene. Anti-bulge strength test of wire glass when the temperature is lower than 100℃
UNI 7531-1976 glass container. Determination of strength against internal pressure
UNI 5303-1973 Technology, medicinal and sanitary glass products. Determination of hydrolytic strength of glass (powder) mass at 121°C
UNI 5301-1963 Glass products for technology and hygiene. Determination of glass resistance to strong alkali

Korean Agency for Technology and Standards (KATS)

KS M 3085-2014 Testing method for charpy impact strength of glass fiber reinforced plastics
KS L 2015-2006(2021) Heat-strengthened glass
KS M 3085-1994 Testing method for Charpy impact strength of glass fiber reinforced plastics
KS L 2015-1996 Heat-strengthened glass
KS L 2015-2021 Heat-strengthened glass
KS M 3385-2020 Testing method for transverse shear strength of glass fiber reinforced plastics
KS M 3084-2003 TESTING METHOD FOR LZOD IMPACT STRENGTH OF GLASS FIBER REINFORCED PLASTICS
KS M 3385-2004(2020) Testing method for transverse shear strength of glass fiber reinforced plastics
KS M 3084-1994 Testing method for lzod impact strength of glass fiber reinforced plastics
KS M 3384-2014 Testing method for apparent interlaminar shear strength of glass fiber reinforced plastics
KS M 3387-2016(2021) Testing method for Barcol hardness of glass fiber reinforced plastics
KS L ISO 9385:2010 Testing method for knoop indentation hardness of glass and glass-ceramics
KS B 5302-1983(2016) Etched-stem liquid-in glass thermometer
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS M 3387-2004 Testing method for Barcol hardness of glass fiber reinforced plastics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS M 3839-2003 RECYCLED REINFORCED GLASS BEAD SYSTEM KITCHEN SHEETS
KS F 4802-2011(2016) Glassfiber-reinforced plastic corrugated sheets

(U.S.) Ford Automotive Standards

FORD WSK-M4D708-A-1990 POLYAMIDE (PA) 6, 30% GLASS FIBER/GLASS SPHERE REINFORCED
FORD FLTM BN 151-05-2008 DETERMINATION OF 180 DEGREE PEEL ADHESION STRENGTH OF LAMINATES
FORD ESB-M11P27-A-1985 ADHESION REQUIREMENTS, ADHESIVE FOR BONDING FRP/FRP AND FRP/METAL
FORD ESE-M4D341-A1-1981 POLYESTER, THERMOPLASTIC - 30% GLASS REINFORCED

CH-SNV

VSM 33715-1968 Fiberglass felt mat. Determine tensile strength

American Society for Testing and Materials (ASTM)

ASTM C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C700-07a Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM C700-07 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM C700-07e1 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
ASTM D3914-02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3914-02(2008) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM RR-F07-1008 2003 F0428-Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM D2925-24 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-23 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D3102-78 Practice for Determination of Isostatic Collapse Strength of Hollow Glass Microspheres
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F428-19(2024) Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D2925-14(2019) Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
ASTM D3517-14 Standard Specification for ldquo;Fiberglassrdquo; 40;Glass-Fiber-Reinforced Thermosetting-Resin41; Pressure Pipe
ASTM D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3914-02 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D2310-06(2012) Standard Classification for Machine-Made ldquo;Fiberglassrdquo; (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3914-96 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3517-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM F428-83(1997)e2 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

Military Standards (MIL-STD)

MIL MIL-C-20079H-1987 CLOTH, GLASS; TAPE, TEXTILE GLASS; & THREAD, GLASS & WIRE-REINFORCED GLASS (SUPERSEDING MIL-C-20079G)

U.S. Military Regulations and Norms

ARMY MIL-PRF-46197 A-1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC- REINFORCED, POLYESTER RESIN PREIMPREGNATED
ARMY A-A-59784-2005 E-GLASS CLOTH REINFORCEMENT

CZ-CSN

CSN 70 0556-1962 Testing of glass containers. Determination of thickness of glass
CSN 64 4002-1984 Plastics. Standard glass reinforced plastics
CSN 70 4118-1995 Laboratory glassware,graduated glass measures
CSN 25 8141-1972 Glass thermometers. Laboratory glass thermometers with conical ground glass joint
CSN 70 4118-1984 Graduated glass measures

American National Standards Institute （ANSI)

ANSI/TAPPI T1009 om-2010 Tensile strength and elongation at break for fiber glass mats
ANSI/TAPPI T1013 om-2010 Loss on ignition of fiber glass mats
ANSI/ASTM D2310:2006 Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Standard Association of Australia （SAA）

AS 3572.10:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 10: Determination of the initial ring stiffness of glass filament reinforced plastics pipes
AS 3572.8:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 8: Determination of long-term ring stiffness of glass filament reinforced plastics pipes
AS 3572.5:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 5: Determination of hoop tensile strength of wound glass filament reinforced plastics pipes
AS 3572.13:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 13: Determination of the initial longitudinal tensile strength of glass filament reinforced plastics pipes
AS 3572.11:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 11: Determination of the initial ring deflection of glass filament reinforced plastics pipes
AS 3572.12:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 12: Determination of initial failure pressure and initial hoop strength of glass filament reinforced plastics pipes
AS 2590:1983 Glass fibre reinforced gypsum plasterboard

Canadian General Standards Board （CGSB)

CAN/CGSB-12.11-M90-1990 Reinforced safety glass

AT-ON

ONORM EN 59-1978 Glass reinjorced plastics. Measu.rem.ent of hardness by means of a barcol-impressor
ONORM EN 60-1978 Glass reinforced plastics. Determination of the loss on ignition.

International Federation of Trucks and Engines

NAVISTAR CEMS DT-8-2004 Glass Content of Reinforced Plastics

FI-SFS

SFS 3833-1977 Fiberglass products. blanket. Tensile strength determination

Bureau of Indian Standards

IS 18457-2023 Plastics Glass-Fibre-Reinforced Products Determination of Fibre Length
IS 16982-2018 Heat Strengthened Glass â€” Specification
IS 14260-1995 Glass and glass-ceramics - Knoop hardness test

Society of Automotive Engineers (SAE)

SAE AMS3601D-2004 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601D-1992 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601B Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601A Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601D Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601C Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3601E Plastic Sheet, Copper Faced, Glass Fabric Reinforced Epoxy Resin, Hot Strength Retention
SAE AMS3601E-2011 Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention
SAE AMS3316-2001 Silicone Rubber, Fiberglass Fabric Reinforced
SAE J1882-1987 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE J1882-1994 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)

GM Holden Ltd

HOLDEN HN 1744-2012 Glass Reinforced Polyphenylene Ether
HOLDEN HN 1430-2001 A.B.S. Glass Reinforced
HOLDEN HN 1207-2014 Glass Filled ABS
HOLDEN HN 1744-2001 Glass Reinforced Polyphenylene Ether
HOLDEN HN 1207-2001 Glass Filled ABS
HOLDEN HN 1408-2009 GLASS REINFORCED POLYETRAFLOURO ETHYLENE
HOLDEN HN 1433-2006 Polypropylene - Glass Reinforced

SE-SIS

SIS SS 16 84 05-1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol im pressor

Magyar Szabványügyi Testület

MNOSZ 21400-1955 Reinforced safety flat glass
MSZ 11210-1968 Glass Thermometer Liquid Filled Industrial Glass Thermometer Protective Accessories

South African Bureau of Standard

SANS 1749:2006 Glass-reinforced polyester (GRP) poles

United States Navy

NAVY MIL-C-20079 H-1987 CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS [Use In Lieu Of: NAVY MIL-C-0020079 G (1)]

International Association of Plumbing and Mechanical Officials

IAPMO PS 82-1995 Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN prEN 6032:1970 Fibre reinforced plastics - Test method - Determination of the glass transition temperatures

TH-TISI

TIS 1568-1998 Fibreglass reinforced polyester doors
TIS 1984-2000 Glass fibre reinforced gypsum plasterboards

YU-JUS

JUS B.E0.001-1987 Glass, vvast and worm glass. Classification, signffication and storage of wast and worm glass

National Aeronautics and Space Administration (NASA)

NASA UFGS-06 71 33-2011 FIBERGLASS REINFORCED PLASTIC (FRP) LADDERS

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ASTM D3517:2016 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe