Two ways to assess accuracy

Two ways to assess accuracy, Total:156 items.

The international standard classification for "Two ways to assess accuracy" includes: Linear and angular measurements , Application of statistical methods , Limits and fits , Test conditions and procedures in general , Metrology and measurement in general .

The Chinese standard classification for "Two ways to assess accuracy" includes: Basic standards and general methods , Mathematics , Papermaking in general , Basic standards and general methods , Standardization and Quality Management , Measurement in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6379.5-2006 Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods
GB/T 27411-2012 Routine methods for evaluation and expression of measurement uncertainty in testing laboratory
GB/T 6379.2-2004 Accuracy (trueness and precision) ofmeasurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
GB/T 6379.4-2006 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
GB/Z 24987-2010 Paper,board and pulps—Estimation of uncertainty for test methods
GB/T 43911-2024 Evaluation method for uncertainty of boiler thermal performance test

Hubei Provincial Standard of the People's Republic of China

DB42/T 800-2012 SSR detection method for purity of two-line hybrid rice varieties
DB4201/T 520-2017 SSR identification method for purity of two-line hybrid rice varieties

Professional Standard - Aerospace

QJ 1964-1990 Evaluation Method of Precision and Accuracy of Wind Tunnel Dynamometer Test

Group Standards of the People's Republic of China

T/GDAQI 84-2022 Methodological comparison and evaluation of the accuracy of in vitro diagnostic reagents
T/SMA 0007-2020 Evaluation Method of Measurement Uncertainty of Variable Head Water Flow Standard Device
T/CSTM 00961-2022 Chemical composition quantitative analytical methods - General rules for evaluation of accuracy　（trueness and precision）compliance
T/CSAE 172-2021 Test methods for accuracy evaluation of range estimation battery electric passenger cars
T/CRES 0002-2018 Test Method for Solar Heliostat Tracking Accuracy
T/DFTM 009-2023 A quality standard for Dafang Gastrodia elata and two bacteria

Military Standard of the People's Republic of China-General Armament Department

GJB 1485-1992 Precision, accuracy and uncertainty of material physical property testing methods
GJB 4006B-2019 Assessment of spacecraft orbit determination accuracy

Professional Standard - Certification and Accreditation

RB/T 141-2018 Evaluation of measurement uncertainty in the chemical testing field—Applying quality control and method validation data

Henan Provincial Standard of the People's Republic of China

DB4117/T 214-2018 Evaluation method and standard of muscle quality of Queshan black pig

Professional Standard - Agriculture

SN/T 3402-2012 Identification genuineness and purity of two-line rice varieties using DNA analysis method

未注明发布机构

SAE EPR2024013-2024 Two Approaches to Mobility Engineering

Professional Standard - China Metal Association

CSM 01 01 01 02-2006 CSM 01 01 01 02-2006 Uncertainty assessment specification of spectrophotometric method measurement result
CSM　01　01　01　01-2006 Specification for Uncertainty Evaluation of Titration Measurement Results
CSM 01 01 01 01-2006 CSM 01 01 01 01-2006 Uncertainty assessment specification of titration measurement result
CSM 01010101-2006 Specification for Uncertainty Evaluation of Titration Measurement Results
CSM 01010102-2006 Specification for Uncertainty Evaluation of Measurement Results by Spectrophotometry

Korean Agency for Technology and Standards (KATS)

KS Q ISO TR 13587-2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
KS Q ISO TR 13587:2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
KS A ISO 5725-4:2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-4-2021 Accuracy(trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS A ISO 5725-5-2022 Accuracy(trueness and precision) of measurement methods and results－Part 5：Alternative methods for the determination of the precision of a standard measurement method
KS Q ISO TS 17503-2021 Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
KS Q ISO TS 17503:2021 Statistical methods of uncertainty evaluation — Guidance on evaluation of uncertainty using two-factor crossed designs
KS I ISO 13752-2024 Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
KS A ISO 5725-1-2022 Accuracy(trueness and precision) of measurement methods and results － Part 1: General principles and definitions
KS I ISO 13752-2019 Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
KS A ISO 5725-5-2012(2017) Accuracy(trueness and precision) of measurement methods and results － Part 5: Alternative methods for the determination of the precision of a standard measurement method
KS A ISO 5725-4-2012(2017) Accuracy(trueness and precision) of measurement methods and results － Part 4: Basic methods for the determination of the trueness of a standard measurement method
KS B ISO 4292-2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods
KS B 5421-2021 Method for determining various functions of projection lenses
KS A ISO 5725-4:2012 Accuracy(trueness and precision) of measurement methods and results-Part 4:Basic methods for the determination of the trueness of a standard measurement method

Gosstandart of Russia

GOST R ISO 5725-4-2002 Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002 Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-2-2002 Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R 50459-1992 Agricultural seeds. Methods for determination of diesease infestation
GOST R 59644-2021 Agricultural seeds. Methods for determination of diesease infestation

British Standards Institution (BSI)

BS PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
BS ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results-Basic methods for the determination of the trueness of a standard measurement method
BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
BS ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results - Basic method for the determination of repeatability and reproducibility of a standard measurement method
BS ISO 5725-4:1995 Accuracy (trueness and precision) of measurement methods and results - Basic methods for the determination of the trueness of a standard measurement method
BS PD ISO/TS 17503:2015 Statistical methods of uncertainty evaluation. Guidance on evaluation of uncertainty using two-factor crossed designs
BS ISO 13752:1998(1999) Air quality — Assessment of uncertainty of a measurement method under field conditions using a second method as reference
22/30329297 DC BS ISO 5725-1. Accuracy (trueness and precision) of measurement methods and results - Part 1. General principles and definitions
24/30477549 DC BS ISO 5725-5 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method

Danish Standards Foundation

DANSK DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
DANSK DS/ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method
DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-5/Corr. 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
DANSK DS/ISO 5725-2:2019 Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DANSK DS/ISO 5725-5:2000 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
DS/ISO 5725-2/Corr.1:2002 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DS/ISO 5725-1/Cor.1:2000 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions

GCC Standardization Organization

GSO ISO 1242:2024 Essential oils — Determination of acid value by two titration methods, manual and automatic
GSO ISO 14807:2013 Photography -- Transmission and reflection densitometers -- Method for determining performance
GSO ISO 5725-3:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 3: Intermediate measures of the precision of a standard measurement method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 5725-4:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 4: Basic methods for the determination of the trueness of a standard measurement method
OS GSO ISO 13752:2015 Air quality -- Assessment of uncertainty of a measurement method under field conditions using a second method as reference
OS GSO ISO 5725-5:2010 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method

Ente Nazionale Italiano di Unificazione

UNI ISO 5725-4:2004 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
UNI ISO 5725-5:2004 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
UNI EN ISO 20896-1:2019 Dentistry - Digital impression devices - Part 1: Methods for assessing accuracy
UNI ISO 5725-1:2004 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions

South African Bureau of Standard

SANS 5725-5:2009 Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method
SANS 5725-4:2009 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
SANS 5725-2:2009 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
SANS 5725-3:2009 Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method

Association Francaise de Normalisation

NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement results and methods - Part 4: basic methods for determining the accuracy of a standardized measurement method
NF X06-041-4*NF ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4 : basic methods for the determination of the trueness of a standard measurement method
NF ISO 13752:1998 Air quality - Evaluation of the uncertainty of an on-site measurement method using a second method as a reference
NF X06-041-5*NF ISO 5725-5:1998 Application statistics - Accuracy (trueness and precision) of measurement methods and results - Part 5 : alternative methods for the determination of the precision of a standard measurement methods.
NF X06-041-2*NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2 : basic method for the determination of repeatability and reproducibility of a standard measurement method
NF ISO 5725-2:2020 Accuracy (trueness and precision) of measurement results and methods - Part 2: basic method for determining the repeatability and reproducibility of a standardized measurement method

IT-UNI

UNI ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
UNI ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

VN-TCVN

TCVN 6910-4-2001 Accuracy (trueness and precision) of measurement methods and results.Part 4: Basic methods for the determination of the trueness of a standard measurement method
TCVN 6910-5-2002 Accuracy (trueness and precision) of measurement methods and results.Part 5: Alternative methods for the determination of the precision of a standard measurement method

German Institute for Standardization

DIN ISO 5725-5:2002-11 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
DIN ISO 5725-4:2003-01 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method (ISO 5725-4:1994)
DIN ISO 5725-5 Berichtigung 1:2006-04 Accuracy (trueness and precision) of measurement methods and results – Part 5: Alternative methods for the determination of the precision of a standard measurement method
DIN ISO 5725-5:2002 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998)
DIN ISO 5725-5 Berichtigung 1:2006 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method (ISO 5725-5:1998), Corrigenda to DIN ISO 5725-5:2002-11 (ISO 5725-5:1998/Cor. 1:2005
DIN ISO 5725-2:2020 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN ISO 5725-2:2022-05 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
DIN ISO 13752:1999-01 Air quality - Assessment of the uncertainty of a measurement method under field conditions using a second method as reference (ISO 13752:1998)
DIN ISO 21748 E:2012-09 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
DIN ISO 5725-2:2022 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English
DIN ISO 5725-1 Berichtigung 1:1998-09 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
DIN ISO 5725-2:2020-10 Draft Document - Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:2019); Text in German and English

Swedish Institute for Standards

SS-ISO 5725-4:2003 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method �
SS-ISO 4292:1991 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods
SS-ISO 13752:1998 Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference

Bureau of Indian Standards

IS 15393-4-2021 Accuracy ( Trueness and Precision ) of Measurement Methods and Results - Part 4 Basic Method for the Determination of Trueness of a Standard Measurement Method
IS 15374-2003 Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point Methods
IS 15393-5-2003 Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 5 : Alternative Methods for the Determination of the Precision of a Standard Measurement Method
IS 15393-2-2021 Accuracy trueness and precision of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

International Organization for Standardization (ISO)

ISO/AWI 5725-5 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/CD 5725-5:2023 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 13752:1998 Air quality - Assessment of uncertainty of a measurement method under field conditions using a second method as reference
ISO/TS 17503:2015 Statistical methods of uncertainty evaluation - Guidance on evaluation of uncertainty using two-factor crossed designs
ISO 5725-5 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
ISO 5725-5:1998/cor 1:2005 Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method; Technical Corrigendum 1
ISO 5725-1:2023 Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
ISO 5725-4:2020 Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method

Association of German Mechanical Engineers

VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
VDI 2449 BLATT 3-2001 Test criteria for measurement procedures — General method for determining the uncertainty of calibrated measurement procedures
VDI 2449 Blatt 3-1999 Pruefkriterien von Messverfahren - Allgemeine Methode zur Ermittlung der Unsicherheit kalibrierfaehiger Messverfahren
VDI/VDE/DGQ/DKD 2622 BLATT 2.1:2011 Calibration of measuring instruments for electrical quantities — Methods for determining measurement uncertainty — Notes on a practical approach
VDI/VDE/DGQ/DKD 2622 Blatt 2-1999 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit
VDI/VDE/DGQ/DKD 2622 BLATT 2-2021 Calibrating measuring equipment for electrical quantities - methods for determining measurement uncertainty
VDI VDE DGQ DKD 2622 Blatt 2-2021 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty
VDI VDE DGQ DKD 2622 Blatt 2-1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty
VDI/VDE/DGQ/DKD 2622 BLATT 2-2013 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit
VDI VDE DGQ DKD 2622 Blatt-2 E:2013-10 Calibration of measuring equipment for electrical quantities - Methods for determining measurement uncertainty
VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2010 Kalibrieren von Messmitteln fuer elektrische Groessen - Methoden zur Ermittlung der Messunsicherheit - Anmerkungen zu einer praxisgerechten Vorgehensweise
VDI/VDE/DGQ/DKD 2622 Blatt 2.1-2011 Calibration of measuring equipment for electrical quantities - Methods for the determination of measurement uncertainty - Notes to a practical approach

SE-SIS

SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13752:2017 Air quality -- Assessment of uncertainty of a measurement method under field conditions using a second method as reference

European Committee for Standardization (CEN)

EA-4/02 M Evaluation of the Uncertainty of Measurement in Calibration

Japanese Industrial Standards Committee (JISC)

JIS Z 8404-1:2006 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
JIS Z 8404-1:2018 Measurement uncertainty -- Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
JIS Z 8402-5:2002 Accuracy (trueness and precision) of measurement methods and results -- Part 5: Alternative methods for the determination of the precision of a standard measurement method

Spanish Association for Standardization (UNE)

UNE 82009-5:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD.
UNE 82009-4:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 4: BASIC METHODS FOR THE DETERMINATION OF THE TRUENESS OF A STANDARD MEASUREMENT METHOD.

American Society for Testing and Materials (ASTM)

ASTM E112-96e2 Standard Test Methods for Determining Average Grain Size
ASTM E597-95 Singular Rating Determination Method
ASTM E112-13(2021) Standard Test Methods for Determining Average Grain Size
ASTM D6708-15 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM D6708-08 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
ASTM F1082-00 Tires -- Practice for determining the precision of test method standards

International Telecommunication Union (ITU)

ITU-R S.1554 FRENCH-2002 Methodology for determining the overall accuracy of epfd downlink measurements
ITU-R S.1554 SPANISH-2002 Methodology for determining the overall accuracy of epfd downlink measurements

Magyar Szabványügyi Testület

MSZ 14141/47-1981 Methods for measuring accuracy characteristics of metal plate machines. location accuracy

Indonesia Standards

SNI 19-6739-2002 Examination methods for type capacity and transmissivitas estimation on tested wells

Others: Method Accuracy Evaluation,Two ways to assess accuracy,Evaluation of method accuracy