shear surface temperature

shear surface temperature, Total:320 items.

The international standard classification for "shear surface temperature" includes: Adhesives , Reinforced plastics , Lubricants, industrial oils and related products , Products of the chemical industry , Insulating gases , Rubber , Hand-operated tools , Grinding and polishing machines , Meat and meat products .

The Chinese standard classification for "shear surface temperature" includes: Basic standards and general methods for adhesives , Fibre reinforced composites , Lubricating oil , Basic standard and general method for synthetic rubber , Hand tool , Grinding machine , Rubber products in general , Meat processing and products .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
GB/T 36794-2018 Determination of shear adhesion failure temperature of adhesive tape

Professional Standard - Petrochemical Industry

SH/T 0751-2005 Standard test method for measuring viscosity at high temperature and high shear rate by tapered-plug viscometer
SH/T 0732-2004 Standard test method for low temperature low shear rate viscosity/temperature dependence of lubricating oils using a temperature - scanning technique

Military Standard of the People's Republic of China-General Armament Department

GJB 10247.1-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 1: Tensile shear strength
GJB 1709-1993 Test method for low temperature tensile shear strength of adhesives
GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)

Professional Standard - Aviation

HB 2544-1976 Pneumatic straight scissors maximum cutting thickness 2~4 mm
HB 5213-1982 High Temperature Shear Test Method for Metals
HB 2545-1976 The maximum shear thickness of vibrating shear is 2mm
HB 5250-1993 Test Method for Shear Strength for Vulcanized Sealant at Room Temperature

工业和信息化部

HG/T 5052-2016 Method for heat-fail temperature in shear of hot melt adhesives

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28889-2012 Test method for In-plane shear properties of composite materials
GB/T 13096.3-1991 Test method for inplane shear strength of pultruded glass fiber reinforced plastic rods
GB/T 7754-1987 Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side the tape)
GB/T 1700-2001 Ebonite-Determination of shearing strength
GB/T 42910-2023 Test methods for shear strength by compression loading at high temperature of inorganic adhesives
GB 6400-1986 High temperature shear test method for metals wires and rivets

未注明发布机构

DIN CEN/TS 12697-51:2017*DIN SPEC 18099:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
ASTM D2718-2024 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
DIN 18137-3 E:2002-09 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN EN ISO 20337 E:2019-06 Shear test method for determination of in-plane shear stress/shear strain response and shear modulus of fiber-reinforced plastic composites using a shear frame (draft)
ASTM RR-D02-1595 2001 D6821- Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
DIN EN 17224 E:2018-04 Determination of compressive shear strength of wood adhesives at elevated temperatures
ASTM RR-D02-1511 2001 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM RR-D02-1448 1999 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM RR-D02-1496 2001 D4741-Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
DIN EN 17643 E:2021-02 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
DIN 52367 E:2016-08 Wood-based panels - Determination of shear strength parallel to the surface
ASTM RR-D02-1497 2001 D4741-Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM RR-D02-1568 2003 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
DIN 18137-3 E:1997-10 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test

未注明发布机构

ASTM RR-D02-1511 2001 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM RR-D02-1568 2003 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
DIN EN 17643 E:2021-02 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
ASTM RR-D02-1496 2001 D4741-Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
DIN 18137-3 E:2002-09 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
ASTM D2718-2024 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
DIN 52367 E:2016-08 Wood-based panels - Determination of shear strength parallel to the surface
ASTM RR-D02-1595 2001 D6821- Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM RR-D02-1497 2001 D4741-Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM RR-D02-1448 1999 D5133-Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
DIN EN ISO 20337 E:2019-06 Shear test method for determination of in-plane shear stress/shear strain response and shear modulus of fiber-reinforced plastic composites using a shear frame (draft)
DIN EN 17224 E:2018-04 Determination of compressive shear strength of wood adhesives at elevated temperatures
DIN 18137-3 E:1997-10 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN CEN/TS 12697-51:2017*DIN SPEC 18099:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test

国家能源局

NB/SH/T 0983-2019 Standard test method for low temperature viscosity of drive line lubricants in a constant shear stress viscometer

Professional Standard - Railway

TB/T 2750-1996 Burr height of blanking and shearing parts

Group Standards of the People's Republic of China

T/CSCM 06-2023 Test methods for ultra-high temperature mechanical properties of carbon/carbon composites Part 4: In-plane shear strength test methods
T/CSEB 0003-2018 Testing method for determining dynamic shear strength of rock materials by the punch shear specimen

工业和信息化部/国家能源局

JB/T 12505-2014 Rolling cross-cut shears

Professional Standard - Light Industry

QB/T 2441.2-1999 Nippers - End Cutting Nippers
QB/T 2441.2-2007 Nippers-End cutting nippers

Professional Standard - Machinery

JB/T 12505-2015 Rolling shear-cross cut shear
JB/T 6197.1-1999 Shear Blade Shapening Machines Accuracy Inspection

Professional Standard - Chemical Industry

HG/T 3848-2008 Ebonite - Determination of shearing strength

Professional Standard - Agriculture

NY/T 1180-2006 Determination of meat tenderness Shear force method

Taiwan Provincial Standard of the People's Republic of China

CNS 12548-1989 Method of Shear Test for Side Fillet Welded Joint

GSO

GSO ISO 19212:2013 Adhesives - Determination of temperature dependence of shear strength
BH GSO ISO 19212:2016 Adhesives - Determination of temperature dependence of shear strength
GSO ISO 14129:2014 Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method
OS GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
GSO ASTM D5133:2016 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
BH GSO ASTM D5133:2017 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
GSO ASTM D5133:2024 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

GM Daewoo

GMKOREA EDS-T-7689-2011 Determination of Shear Strength for Double Side Adhesive Tape

Association Francaise de Normalisation

NF E73-105:1984 Pliers and nippers. Side cutting nippers.
NF EN ISO 20337:2019 Fiber Reinforced Plastic Composites - Shear Test Method Using Shear Frame for Determination of In-Plane Shear Stress/Shear Strain and Shear Modulus
NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NF B43-206:1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 6:Determination of shear strength by double-punch shearing
NF T76-200*NF EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
NF E73-104:1984 Pliers and nippers. End cutting nippers.
NF P21-372:1995 Glued laminated timber. Shear test of glue lines.
NF T57-402*NF EN ISO 14129:1998 Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus over minus 45 degrees tension test method.

RO-ASRO

STAS 2161-1987 PANKT, Ddmniiuilion of slicarin^ slri'iiL?th ol j?lue joinl
STAS 9182-1973 PLASTICS Determination of shearing strengt h
STAS 9159-1989 PLYWOOD Shearing strength determination

Korean Agency for Technology and Standards (KATS)

KS M ISO 19212-2019 Adhesives — Determination of temperature dependence of shear strength
KS M ISO 19212-2014(2019) Adhesives — Determination of temperature dependence of shear strength
KS M ISO 14129-2016(2021) Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 14129-2021 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 14129:2011 Fibre-reinforced plastic composites-Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 14129:2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS M ISO 13445-2022 Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS M ISO 13445:2012 Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS M ISO 13445-2012(2017) Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
KS P ISO 29022:2019 Dentistry — Adhesion — Notched-edge shear bond strength test
KS M ISO 13445-2012(2022) Adhesives－Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
KS B 3018-2002(2012) CUTTING NIPPERS

International Organization for Standardization (ISO)

ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
ISO 20337:2018 Fibre-reinforced plastic composites — Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
ISO 14129:1997 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ˝45° tension test method
ISO 13445:2003 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method
ISO 3683:1978 Soft soldered joints — Determination of shear strength
ISO 29022:2013 Dentistry.Adhesion.Notched-edge shear bond strength test

British Standards Institution (BSI)

BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
BS EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method
BS EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
21/30423946 DC BS EN 17643. Bitumen and bituminous binders. Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR). BTSV test
BS DD CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS EN 17643:2022 Bitumen and bituminous binders. Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR). BTSV test
BS EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
DD CEN/TS 15324:2008 Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
21/30394867 DC BS ISO 24057. Array measurement of microtremors to estimate shear wave velocity profile
BS ISO 24057:2022 Geotechnics. Array measurement of microtremors to estimate shear wave velocity profile
BS EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

ES-AENOR

UNE 16-529-1990 Pliers and clamps. Connecting pliers for side cutting, front cutting and diagonal cutting. Measurement and testing

PL-PKN

PN B04483-1989 Laboratory methods of shear strength testing of soils by means of apparatus with defined shear surface
PN H04321-1986 Metalls Testing of shear strength
PN M69782-1974 Shearing strength test of spot weld
PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
PN C89300-1969 Adhesive? to me?als Determinalion of shear s?rength

KR-KS

KS M ISO 14129-2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
KS B ISO 9654-2023 Pliers and nippers for electronics — Single-purpose nippers — Cutting nippers
KS P ISO 29022-2019 Dentistry — Adhesion — Notched-edge shear bond strength test

ES-UNE

UNE-EN 17224:2020 Determination of compressive shear strength of wood adhesives at elevated temperatures
UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
UNE-EN 17643:2023 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a dynamic shear rheometer (DSR) - BTSV test
UNE-EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties (Endorsed by AENOR in August of 2005.)

European Committee for Standardization (CEN)

EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
prEN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
EN ISO 14129:1997 Fibre-Reinforced Plastic Composites - Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the Plus or Minus 45 Degree Tension Test Method ISO 14129:1997
DD ENV 12 289-1996 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at Ambient Temperature - Determination of In-Plane Shear Properties
CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
PD CEN/TS 12697-51:2017 Bituminous mixtures - Test methods - Part 51: Surface shear strength test
EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength
EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test

AENOR

UNE 103401:1998 DETERMINATION OF THE SHEAR STRENGTH OF A SOIL WITH THE DIRECT SHEAR BOX.
UNE-EN ISO 14129:1999 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +-45o TENSION TEST METHOD. (ISO 14129:1997).
UNE 83511:2005 CONCRETE WITH FIBERS. DETERMINATION OF SHEAR STRENGTH
UNE-EN ISO 13445:2007 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)

American Society for Testing and Materials (ASTM)

ASTM D2718-00(2011)e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-18 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-24 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D5321/D5321M-21 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321/D5321M-19 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D5321/D5321M-20 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM C1469-22 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM C146-94a(1999) Standard Test Methods for Chemical Analysis of Glass Sand
ASTM D5321/D5321M-17 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
ASTM D4498-07 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D5321-92(1997) Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
ASTM D3846-94 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D4498-07(2015) Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM D3846-08 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D2718-00(2011) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D6243-13 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6243-06 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6243-09 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-05 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
ASTM D5481-96(2001) Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
ASTM D5481-96 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
ASTM C1469-10(2015) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM D2718-00 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D5133-13 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D6243/D6243M-20 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D6243/D6243M-16 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D2718-00e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D2718-00(2006) Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
ASTM D6243-08 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
ASTM C1469-00 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM D4498-00 Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
ASTM E143-02(2008) Standard Test Method for Shear Modulus at Room Temperature
ASTM E143-01 Standard Test Method for Shear Modulus at Room Temperature
ASTM E143-20 Standard Test Method for Shear Modulus at Room Temperature
ASTM C1469-00(2005) Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM E143-02 Standard Test Method for Shear Modulus at Room Temperature
ASTM C1469-10 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
ASTM D4741-13 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D4741-00 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D4741-12 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM E143-87(1998) Standard Test Method for Shear Modulus at Room Temperature
ASTM C1292-22 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM D4741-96 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM C1292-16 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D4741-20 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D4741-20a Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM C1292-10 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM D6821-20 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D4741-17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM D6821-20a Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM E229-97 Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM D6821-02(2007) Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D6821-18 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
ASTM F1362-09 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM C1292-00 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM F1362-97 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM C1292-00(2005) Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM F1362-18(2023) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
ASTM F1362-97(2003) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM D6821-17 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM D4255/D4255M-01(2007) Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
ASTM E143-13 Standard Test Method for Shear Modulus at Room Temperature
ASTM D6821-12 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
ASTM F1362-18 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
ASTM D3914-02(2008) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

SCC

DANSK DS/EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
NS-EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
BS ISO 20337:2018 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
DANSK DS/ISO 20337:2019 Fibre-reinforced plastic composites – Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
NS-EN ISO 20337:2019 Fibre-reinforced plastic composites – Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
DANSK DS/EN ISO 20337:2019 Fibre-reinforced plastic composites – Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
NS-EN ISO 14129:1997 Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)
DANSK DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
AENOR UNE-EN ISO 14129:1999 FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +-45º TENSION TEST METHOD. (ISO 14129:1997).
DIN EN ISO 20337 E:2019 Draft Document - Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German and English version prEN ISO 20337:2019
BS PD CEN/TS 12697-51:2017 Bituminous mixtures. Test methods-Surface shear strength test
DIN EN 17224 E:2018 Draft Document - Determination of compressive shear strength of wood adhesives at elevated temperatures; German and English version prEN 17224:2018
NS 3276:1987 Particle boards - Test methods - Shear strength parallel to the plane of the board
NS 3278:1987 Particle boards - Test methods - Shear strength perpendicular to the plane of the board
DIN 52367 E:2016 Draft Document - Wood-based panels - Determination of shear strength parallel to the surface
DANSK DS/EN 17643:2022 Bitumen and bituminous binders – Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) – BTSV test
NS-EN 17643:2022 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
SN-CEN/TS 15324:2008 Bitumen and bituminous binders — Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DANSK DS/CEN/TS 15324:2008 Bitumen and bituminous binders – Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DIN EN 15324 E:2005 Draft Document - Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version prEN 15324:2005
BS DD ENV 658-6:1993 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of shear strength by double-punch shearing
05/30138357 DC EN 15324. Bitumen and bituminous binders. Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode
AASHTO TP 114-2016 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
AASHTO T 320-2022 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
AASHTO T 320-2003 Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
AASHTO T 320-2007(2020) Standard Method of Test for Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST)
DANSK DS/ISO 24057:2022 Geotechnics – Array measurement of microtremors to estimate shear wave velocity profile
AASHTO TP 114-2017 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
AASHTO TP 114-2018(2022) Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
BS DD ENV 12289:1996 Advanced technical ceramics. Mechanical properties of ceramic composites at ambient temperature. Determination of in-plane shear properties
NS-EN 12289:2005 Advanced technical ceramics — Mechanical properties of ceramic composites at ambient temperature — Determination of in-plane shear properties
VDI 2906 BLATT 2-1994 Cutting surface quality when cutting, trimming and punching metal workpieces; shear cutting
DANSK DS/ISO 8749:1988 Fastening elements. Shear strength testing of pins
DANSK DS/CEN/TS 12697-51:2017 Bituminous mixtures – Test methods – Part 51: Surface shear strength test
VDI 2906 BLATT 2-1994 Cutting surface quality when cutting, trimming and punching metal workpieces; shear cutting
DANSK DS/EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method

Japanese Industrial Standards Committee (JISC)

JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method
JIS B 4623:1995 Cutting pliers
JIS K 7079-2:2012 Carbon fiber reinforced plastics -- Testing methods for in-plane shear properties -- Part 2: Double V-notch shear method

German Institute for Standardization

DIN EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ˝ 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN 52367:2002 Particleboards - Determination of shear strength parallel to the surface
DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
DIN EN 17224:2019-09 Determination of compressive shear strength of wood adhesives at elevated temperatures; German version EN 17224:2019
DIN EN ISO 14129:1998-02 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997
DIN 52367:2017-05 Wood-based panels - Determination of shear strength parallel to the surface
DIN 52367:2017 Wood-based panels - Determination of shear strength parallel to the surface
DIN EN 17224:2019 Determination of compressive shear strength of wood adhesives at elevated temperatures
DIN EN 17643:2022-09 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test; German version EN 17643:2022
DIN SPEC 4885:2014 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus; Text in German and English
DIN CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode; German version CEN/TS 15324:2008
DIN EN 17643:2022 Bitumen and bituminous binders - Determination of equi-shear modulus temperature and phase angle using a Dynamic Shear Rheometer (DSR) - BTSV test
DIN EN 12289:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties; German version EN 12289:2005
DIN EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003) English version of DIN EN ISO 13445:2006-09
DIN EN 12289:2005-09 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties; German version EN 12289:2005
DIN CEN/TS 12697-51:2017-10*DIN SPEC 18099:2017-10 Bituminous mixtures - Test methods - Part 51: Surface shear strength test; German version CEN/TS 12697-51:2017
DIN 18137-3:2002 Soil, investigation and testing - Determination of shear strength - Part 3: Direct shear test
DIN 50002-2:2021-08 Adhesive bondings in electronic applications - Bonding strength at surfaces - Part 2: Shear test
DIN EN 13780:2003 Touch and close fasteners - Determination of longitudinal shear strength; German version EN 13780:2003
DIN ISO 9654:2006 Pliers and nippers for electronics - Single-purpose nippers - Cutting nippers (ISO 9654:2004) English version of DIN ISO 9654:2006-09
DIN EN ISO 13445:2006-09 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003); German version EN ISO 13445:2006
DIN EN 28749:1992-10 Determination of shear strength of pins (ISO 8749:1986); german version EN 28749:1992

The American Road & Transportation Builders Association

AASHTO T 407-2023 Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
AASHTO TP 114-2015 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
AASHTO TP 114-2018(R2021) Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers

CZ-CSN

CSN 49 0174-1966 Determination of shear strength in the plane perpendicular to the plane of a board
CSN 49 0173-1966 Determination of shear strength of a glue joint in the plane of layers
CSN 49 0118-1979 Wood. Shear strength parallel to the grain
CSN ON 43 4163-1961 Cutting scissors. Basic parameters
CSN 64 5436-1974 Testing of cellular materials. Determination of shear strength of rigid cellular materials

AT-ON

OENORM EN 17643-2021 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test
ONORM ENV 658-6-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 6: Determination of shear strength by double-punch shearing
ONORM ENV 12289-1996 Advanced technical ceramics-Mechanical properties of ceramic composites at ambiant temperature-Determination of in-plane shear properties

ESDU - Engineering Sciences Data Unit

STRUCT 00.06.05 A-1980 Shear centre of D-section.
STRUCT 00.06.04 A-1980 Shear centre of circular arc section.
STRUCT 07.03.01 A-1974 Sandwich panels with corrugated core and equal face plates. Transverse shear stiffness.

Lithuanian Standards Office

LST EN ISO 14129:2001 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997)
LST EN 12289-2005 Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties
LST EN ISO 13445:2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)

DIN

DIN EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)

American National Standards Institute （ANSI)

ANSI/ASTM E143:2001 Test Method for Shear Modulus at Room Temperature

CEN - European Committee for Standardization

PREN 17224-2018 Determination of compressive shear strength of wood adhesives at elevated temperatures

RU-GOST R

GOST R EN 12090-2008 Thermal insulating products for building applications. Method for determination of shear behaviour
GOST R 57840-2017 Ceramic composites. Determination of interlaminar shear strength at elevated temperatures
GOST R 57728-2017 Polymer composites. Determination of shear strength of adhesive bond by the block-shear method
GOST R 57745-2017 Polymer composites. Determination of plane shear strength of laminates by short-beam method

Danish Standards Foundation

DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
DS/CEN/TS 15324:2008 Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode
DS/EN 12289:2005 Advanced technical ceramics – Mechanical properties of ceramic composites at ambient temperature – Determination of in-plane shear properties

GOSTR

GOST 12248.8-2020 Soils. Determination of the characteristics of the strength of frozen soils by shearing on the freezing surface
GOST R 57778-2017 Polymer composites. Determination of in-plane shear properties by the rail shear method

AASHTO - American Association of State Highway and Transportation Officials

TP 114-2016 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
TP 114-2018 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
TP 114-2015 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers
TP 114-2017 Standard Method of Test for Determining the Interlayer Shear Strength (ISS) of Asphalt Pavement Layers

NL-NEN

NVN-ENV 658-6-1994 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 6: Determination of shear strength by double-punch shearing

AIA/NAS - Aerospace Industries Association of America Inc.

NASM320-2010 NUT@ PLAIN@ CASTELLATED@ SHEAR (Rev 2)
NAS4452-2010 PIN@ CRIMP@ 100 DEGREES FLUSH SHEAR HEAD (Rev 3)
NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear

IN-BIS

IS 6959-1973 Scissors Specifications Embryotomy Plane Curved

SE-SIS

SIS SS 02 71 27-1991 Geotechnical tests — Shear strength — Direct simple shear test, CU- and CD-tests — Cohesive soil

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-1348-1947 Critical shear stress of curved rectangular panels

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM1312-28-2012 FASTENER TEST METHODS METHOD 28 ELEVATED TEMPERATURE DOUBLE SHEAR

BE-NBN

NBN-EN 432-1994 Resilient floor coverings - Determination of shear force

ZA-SANS

SANS 6044:2006 Shear strength in compression of wood adhesive bonds - Block shear test

US-FCR

FCR COE CRD-C 90-73-1973 HANDBOOK FOR CONCRETE AND CEMENT METHOD OF TEST FOR TRANSVERSE SHEAR STRENGTH CONFINED, SINGLE PLANE OR DOUBLE PLANE

Others: shear surface temperature