Graphite at 500 degrees Celsius

Graphite at 500 degrees Celsius, Total:39 items.

The international standard classification for "Graphite at 500 degrees Celsius" includes: Seals, glands .

The Chinese standard classification for "Graphite at 500 degrees Celsius" includes: Sealing and sealing device .

Professional Standard - Machinery

JB/T 7758.6-2008 Test method for shore handness of flexible graphite sheets
JB/T 6624-1993 Test Method for Shore Hardness of Flexible Graphite Sheet

SCC

AS 2879:1986 Alumina - Determination of loss of mass at 300 degrees Celsius and 1000 degrees Celsius
MIL MIL-DTL-2/3D-2002 VALVE, CYLINDER, GAS: ACTTYLENE, OUTLET 200 (PRESSURES THROUGH 500 PSIG (3450KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/3C)
MIL MIL-DTL-2/20D-2002 VALVE, CYLINDER, GAS: CHLORINE, OUTLET 820, (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/20C)
MIL MIL-PRF-46187A-1998 PREPREG, UNIDIRECTIONAL TAPE, CARBON (GRAPHITE) FIBER HIGH TEMPERATURE RESIN IMPREGNATED, 316 DEGREE C (600 DEGREE F) (SUPERSEDING MIL-P-46187)
MIL MIL-DTL-2/10D-2002 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (CONVEX-HEAD CYLINDER), OUTLET 240, INLET 1.00 INCH (PRESSURES UP THROUGH 500 PSIG (3450KPA) AT 70 DEG. F (21.1 DEG.C)) (SUPERSEDING MIL-DTL-2/10C)
MIL MIL-DTL-2/77A-2002 VALVE, CYLINDER, GAS: METHYL CHLORIDE, OUTLET 660 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/77)
MIL MIL-DTL-2/22E-2002 VALVE, CYLINDER, GAS: REFRIGERANTS, OUTLET 660 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/22D)
MIL MIL-DTL-2/23D-2002 VALVE, CYLINDER, GAS: ETHYL CHLORIDE, OUTLET 300 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/23C)
ASD-STAN PREN 2267:1995 Aerospace Series Electrical Cables for General Purpose Operating Temperatures between -55 Degrees Celsius and +260 Degrees Celsius
MIL MIL-DTL-2/21D-2002 VALVE, CYLINDER, GAS: CHLORINE, (TON CONTAINER), OUTLET 820, (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/21C)
ASD-STAN PREN 2265-003:1995 Aerospace Series Cables, Electrical, for General Purpose Operating Temperatures Between -55 Degrees Celsius and 150 Degrees Celsius Part 003: Ink Jet Printable Product Standardd
MIL MIL-DTL-2/60A-2002 VALVE, CYLINDER, GAS: OXYGEN-HELIUM MIXTURE (HELIUM OVER 80 PERCENT), OUTLET 500, MEDICAL (PRESSURES THROUGH 3000 PSIG (20680 THROUGH 37900 KPA) AT 120 DEG. F(48.9 DEG. C)) (SUPERSEDING MIL-DTL-2/60)
MIL MIL-DTL-2/1E-2002 VALVE, CYLINDER, GAS: ACETYLENE, OUTLET 510, INLET 0.75 INCH (PRESSURES THROUGH 500 PSIG (3450KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/1D)
MIL MIL-DTL-2/2E-2002 VAVLE, CYLINDER, GAS: ACETYLENE, OOUTLET, 510, INLET 1.00 INCH (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/2D)
MIL MIL-DTL-2/54A-2002 VALVE, CYLINDER, GAS: SULFAR DIOXIDE, OUTLET 660 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F(21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/54)
MIL MIL-DTL-2/24D-2002 VALVE, CYLINDER, GAS: ETHYLENE OXIDE, OUTLET 510 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/24C)
MIL MIL-P-83461/1B-1989 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEGREE F (135 DEGREE C) SIZES AND TOLERANCES (SUPERSEDING MIL-P-83461/1A) (S/S BY SAE-AMS-P-83461/1A)
MIL MIL-DTL-2/67A-2002 VALVE, CYLINDER, GAS: LOW PRESSURE, FLAMMABLE OR TOXIC MIXTURE, OUTLET 510 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F(21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/67)
MIL MIL-DTL-2/74A-2002 VALVE, CYLINDER, GAS: LOW PRESSURE, TOXIC AND OXIDIZING MIXTURES, OUTLET 660 (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F (21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/74)
MIL MIL-DTL-2/8D-2002 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (CONVEX-HEAD CYLINDER), OUTLET 240, INLET 0.75 INCH (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F(21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/8C)

U.S. Military Regulations and Norms

ARMY MIL-PRF-46187 A-1998 PREPREG, UNIDIRECTIONAL TAPE, CARBON (GRAPHITE) FIBER HIGH TEMPERATURE RESIN IMPREGNATED, 316 DEG. C (600 DEG. F)

Defense Logistics Agency

DLA MIL-DTL-2/2 E (1)-2006 VALVE, CYLINDER, GAS: ACETYLENE, OUTLET 510, INLET 1.00 INCH (PRESSURES THROUGH 500 psig (3450 kPa) AT 70 Degree F (21.1 Degree C))
DLA MIL-DTL-2/2E (1)-2006 VALVE, CYLINDER, GAS: ACETYLENE, OUTLET 510, INLET 1.00 INCH (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEGREES F (21.1 DEGREES C))
DLA MIL-DTL-5516 D VALID NOTICE 1-2013 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)

PT-IPQ

NP 1294-1976 condiment. Mustard particles. Measurement of weight loss at 103 degrees Celsius
NP 1161-1975 Sodium chloride used in industry. Measurement of weight loss at 110 degrees Celsius

Association Francaise de Normalisation

XP PR EN 2265-003:1995 Aerospace series - Cables, electrical, general purpose - Operating temperatures between - 55 degrees Celsius and 150 degrees Celsius - Part 003: inkjet markable - Product standard

CZ-CSN

CSN 66 8102 Cast.32-1997 Smokeless powder. Test Methods. Loss of chemical stability at 95°C
CSN 66 8029-1973 Smokeless powders Stability test at 100 °C

American Society for Testing and Materials (ASTM)

ASTM D6616-07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100deg;C
ASTM D6616-01a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100176;C
ASTM C748-98(2005) Standard Test Method for Rockwell Hardness of Graphite Materials

British Standards Institution (BSI)

BS EN ISO 21028-2:2018 Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C

SAE - SAE International

SAE AMS2665F-1996 Brazing@ Silver for Use up to 400 Degrees F (204 Degrees C)

Korean Agency for Technology and Standards (KATS)

KS A 0093-1996 KILOCALORIE PER HOUR METER DEGREE CELSIUS-WATT PER METER DEIVIN CONVERSION TABLES

American National Standards Institute （ANSI)

ANSI/ASTM C748:2005 Test Method for Rockwell Hardness of Graphite Materials

RO-ASRO

STAS SR ISO 806:1994 Aluminium oxide primarily uaed for the production of aluminium -Determination of loss of mass at 1000 degrees C and 1200 degrees C

Others: Graphite at 500 degrees Celsius