Phase one/be phase

Phase one/be phase, Total:139 items.

The international standard classification for "Phase one/be phase" includes: Protection against crime , Information sciences .

The Chinese standard classification for "Phase one/be phase" includes: Crime judging technology , Library, Archives, Literature and Information .

Professional Standard - Public Safety Standards

GA/T 1193-2014 Specifications for assessment of loss of working time period, nursing period,vegetative period of personal damages

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 4067-2025 The indicator of the first rain that replenishes soil moisture during the spring sowing period

Shanghai Provincial Standard of the People's Republic of China

DB31/T 875-2015 Evaluation criteria for the rest period, nutrition period and nursing period of personal injury injured persons

Professional Standard - Education

JY 241-1987 Technical Conditions of Slicing in Early Gastrula Stage of Frog

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 35430-2017 Information and documentation―Descriptive metadata element set for periodical

Guangxi Provincial Standard of the People's Republic of China

DB45/T 2502-2022 Monitoring indicators for the beginning and end of the flood season

American Association of State Highway and Transportation Officials

DIVISION I 17.1-1996 General (Interim 1997; Interim 2000)
DIVISION II 30.1-1996 General (Interim 1998)
DIVISION II 8.1-1996 General (Interim 1998)
DIVISION II 18.3-1996 General Requirements (Interim 1997)
DIVISION II 18.5-1996 Fabrication (Interim 1997; Interim 1998)
DIVISION I 10.1-1996 Application (Interim 1999; Interim 2000)
DIVISION I SEC 7-A-1996 General Requirements and Materials (Interim 1997)
DIVISION II 18.4-1996 Materials (Interim 1997; Interim 1998)
DIVISION I 14.8-1996 Corrosion Protection (Interim 1997; Interim 1998)
DIVISION I SEC 14-1996 Bearings (Interim 1997; Interim 1998; Interim 2000; Replaces Sections 15@ 19 and 20)
MBE AMD 1-2010 THE MANUAL FOR BRIDGE EVALUATION (First Edition; Interim Revision)

Aeronautical Radio Inc.

ARINC 600-13 ITEM 3.0 Phase I Design Requirements

Czech Standards Institute (UNMZ)

CSN 30 9031-1993 Cycles. General properties

Electronic Components, Assemblies and Materials Association

SP3301-1994 General Performance Requirements (Comment Period Expires: December 14@ 1994)

European Cooperation for Space Standardization (ECSS)

E-ST-10-24C-2015 Interface management (First Issue)
E-ST-60-10C-2008 Control performances (First Issue)
E-ST-10-11C-2008 Human factors engineering (First Issue)
E-ST-20-06C-2008 Spacecraft charging (First Issue)
Q-ST-10C REV 1-2016 Product Assurance Management (First Issue)
E-ST-10-09C-2008 Reference coordinate system (First Issue)
E-ST-50-15C-2015 CANbus extension protocol (First Issue)
S-ST-00C-2008 Description@ implementation and general requirements (First Issue)
E-ST-50-51C-2010 Space Wire protocol identification (First Issue)
M-70A-1996 Integrated Logistic Support (First Issue)
E-ST-31C-2008 Thermal control general requirements (Second Issue)
E-ST-31-02C-2012 Two-Phase Heat Transport Equipment (First Issue)
E-ST-35C REV 1-2009 Propulsion general requirements (First Issue@ Revision 1)
E-ST-35-03C-2011 Liquid propulsion for launchers (First Issue)
E-ST-32-03C-2008 Structural finite element models (First Issue)
E-ST-50-53C-2010 SpaceWire - CCSDS packet transfer protocol (First Issue)
Q-ST-70-12C-2014 Design rules for printed circuit boards (First Issue)
E-ST-50-52C-2010 SpaceWire - Remote memory access protocol (First Issue)
Q-ST-60-14C-2008 Relifing procedure - EEE components (First Issue)
Q-ST-60-15C-2012 Radiation hardness assurance - EEE components (First Issue)
E-ST-70-01C-2010 Spacecraft On-Board Control Procedures (First Issue)
Q-ST-70-58C-2008 Bioburden control of cleanrooms (First Issue)

Engineering Sciences Data Unit (ESDU)

DWN 12003-2012 Development Work Notice (Issue 1)

Danish Standards Foundation

DS 148:1954 Periodicals. Presentation of periodicals

American Water Works Association (AWWA)

AWWA JAW11136 Journal AWWA — Single Tariff Pricing
AWWA JAW52195 Journal AWWA — Monochloramine and Legionnaires' Disease
AWWA JAW48108 Journal AWWA — Controlling DBPs With Monocholoramine
AWWA JAW62003 Journal AWWA — Tapping into the Knowledge of Frontline Employees
AWWA JAW52376 Journal AWWA — Discussion of Monochloramine and Legionnaires' Disease
AWWA JAW26047 Journal AWWA — Long-Term Options for Municipal Water Conservation
AWWA JAW56577 Journal AWWA — California's First Aeration Plants for Corrosion Control
AWWA JAW3723 Journal AWWA — Conducting a Regular Main Flushing Program
AWWA JAW49861 Journal AWWA — Unidirectional Flushing: A Powerful Tool
AWWA ACE58203 Evaluating Long-Term Conservation Efforts in a Time of Drought
AWWA JAW37622 Journal AWWA — Long-Term Effects of Sludge Application to Land
AWWA JAW6128 Journal AWWA — Hydropower: A Step Toward Energy Independence
AWWA ACE92201 Boston's Meter Downsizing Project: A One-Year Report
AWWA JAW41496 Journal AWWA — Wholesale Contracts: A Resource Option
AWWA WQTC71444 Lead and Copper Rule: Short-Term and Long-Term Issues
AWWA JAW6144 Journal AWWA — One Approach to Computerized Operation
AWWA JAW39248 Journal AWWA — Integrated Planning: A Common-Sense Approach
AWWA JAW53502 Journal AWWA — Uses of a Long-Term Water Production Database

US Federal Contractor Registration (USFCR)

FCR AF I36-2252-2000 FIRST TERM AIRMEN CENTER

Magyar Szabványügyi Testület

MNOSZ 17153-1953 List of initial assistant tools
MSZ 9721/1-1982 General standards for periodic testing of lifting machinery

Canadian Standards Association (CSA)

CSA M688-2010 Transporteurs agricoles mobiles à vis - Sécurité générale (Première édition; Mise à jour no 1: Février 2011)
CSA PLUS 1119-96-1996 Life Cycle Impact Assessment Methodology for the Production Phase of the Pulp and Paper Life Cycle First Edition
CAN/CSA-ISO 14042-2000(R2005) Environmental Management - Life Cycle Assessment - Life Cycle Impact Assessment (Adopted ISO 14042:2000, first edition, 2000-03-01)

Gosstandart of Russia

GOST R 58302-2018 Life cycle costs management. Nomenclature of the life cycle costs indices. General requirements
GOST R 53336-2009 Live-cycle of railway rolling stock. General requirements
GOST 8320.0-1983 Periodic sections produced by helical rolling. General technical requirements
GOST ISO 8601-2001 System of standards on information, librarianship and publishing. Representation of dates and times. General requirements
GOST R 70412-2022 Сonfectionery. Guidelines for setting and confirming expiration dates

U.S. Military Regulations and Norms

ARMY A-A-1725-1981 GAGE, TIRE PRESSURE, HEAVY-DUTY, GENERAL SERVICE, SHORT EXTENSION, SINGLE-CHUCK FOOT
ARMY A-A-1726-1981 GAGE, TIRE PRESSURE, HEAVY-DUTY, GENERAL SERVICE, LONG EXTENSION, DUAL-CHUCK FOOT

Underwriters Laboratories (UL)

UL SUBJECT 2996-2016 Outline of Investigation for In-Ground Boxes (Issue 1)
UL SUBJECT 1331-2004 OUTLINE OF INVESTIGATION FOR STATION INLETS AND OUTLETS (Issue 1)
UL SUBJECT 1964-2000 Outline of Investigation for Rescue Equipment (Issue 1)
UL SUBJECT 1276-2005 Outline of Investigation for Welding Cable (Issue 1)
UL SUBJECT 1650-2006 Outline of Investigation for Portable Power Cable (Issue 1)
UL SUBJECT 4127-2014 Outline of Investigation for Low Voltage Battery Cable (Issue 1)
UL SUBJECT 8800-2017 Outline of Investigation for Horticultural Lighting Equipment (Issue 1)
UL 2115 BULLETIN-2017 UL Standard for Safety Processed Solid-Fuel Firelogs (COMMENTS DUE: Monday@ September 4@ 2017)
UL SUBJECT 2446-2004 OUTLINE OF INVESTIGATION FOR UNITARY BOILER ROOM SYSTEMS (Issue 1)

Standard Association of Australia （SAA）

AS 4912:2002/Amdt 1:2005 General conditions of periodic supply contracts
AS 4912:2002(R2005) General conditions of periodic supply contracts
AS 4912:2002(Reference Use Only) General conditions of periodic supply contracts

Radio Technical Commission for Aeronautics

RTCA TASK FORCE 5-2009 NextGen Mid-Term Implementation Task Force Report (***ONLY AVAILABLE IN HARDCOPY***)

Association Francaise de Normalisation

NF C90-511:1991 Electronic components General Coding date of manufacture
NF E01-013:2015 Mechatronics - Lifecycle and design of products

Spanish Association for Standardization (UNE)

AENOR UNE 49951-1:1973 DOCUMENTS FOR EXPORT. UNIFIED EXPORT DOCUMENT DUE

Türk Standardları Enstitüsü

TS 2990-1978 Promissory Note

United States Navy

NAVY QPL-AS81936-2011 Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race), General Specification for
NAVY QPL-AS81936-QPD-2010 Bearings, Plain, Self-Aligning, (Cu-Be Ball, Cres Race), General Specification for

Society of Automotive Engineers (SAE)

SAE AS81936A Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For
SAE ARP745A General Components Specification for Explosive Actuated Valves One Cycle
SAE AMS2645J-1994 Fluorescent Penetrant Inspection@ by the Latest Issue of ASTM E 1417
SAE ARP745 General Components Specification for Explosive Actuated Valves One Cycle

The Institution of Engineering and Technology (IET)

STRUG FOR UNITY-2008 The Struggle for Unity: Colour television@ the formative years

GM North America

GM 9985557-2014 Adhesive-Sealer, Silicone Rubber, One Part RTV (Issue 9)
GM 9985313-2014 Grease Polyurea, No. 2 (Issue 4)
GM 9985276-2014 Grease, Low Temperature, Non-Soap, No. 1 (Issue 4)

Conference of European Post Telecommunication (CEPT)

CEPT T/S 26-01-1987 ISDN Routing for Gap Phase 1 Services

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE JOURN 40-9 GWR-1998 ASHRAE Journal (Volume 40 Number 9; September 1998)
ASHRAE JOURN 37-6 CPE-1995 ASHRAE Journal (Volume 37@ Number 6; June 1995)
ASHRAE JOURN 39-8 ANC-1997 ASHRAE Journal (Volume 39 Number 8@ August 1997)
ASHRAE JOURN 38-5 UPMS-1996 ASHRAE Journal (Volume 38@ Number 5; May 1996)
ASHRAE JOURN 38-11 RCC-1996 ASHRAE Journal (Volume 38@ Number 11; November 1996)
ASHRAE JOURN 40-8 BFL-1998 ASHRAE Journal (Volume 40 Number 8; August 1998)
ASHRAE JOURN 37-8 SMS-1995 ASHRAE Journal (Volume 37@ Number 8; August 1995)
ASHRAE JOURN 40-2 PSNC-1998 ASHRAE Journal (Volume 40 Number 2; February 1998)
ASHRAE JOURN 44-4 DWCP-2002 ASHRAE Journal (Volume 44@ Number 4; April 2002)
ASHRAE JOURN 38-3 TA-1996 ASHRAE Journal (Volume 38@ Number 3; March 1996)
ASHRAE JOURN 38-9 HCV-1996 ASHRAE Journal (Volume 38@ Number 9; September 1996)
ASHRAE JOURN 38-7 TDS-1996 ASHRAE Journal (Volume 38@ Number 7; July 1996)
ASHRAE JOURN 41-9 IAQ-1999 ASHRAE Journal (Volume 41 Number 9; September 1999)
ASHRAE JOURN 37-10 TCCC-1995 ASHRAE Journal (Volume 37@ Number 10; October 1995)
ASHRAE JOURN 41-4 SI-1999 ASHRAE Journal (Volume 41 Number 4; April 1999)
ASHRAE JOURN 37-4 CTPD-1995 ASHRAE Journal (Volume 37@ Number 4; April 1995)
ASHRAE JOURN 39-1 SI-1997 ASHRAE Journal (Volume 39@ Number 1; January 1997)
ASHRAE JOURN 37-5 TS-1995 ASHRAE Journal (Volume 37@ Number 5; May 1995)
ASHRAE JOURN 40-6 WEW-1998 ASHRAE Journal (Volume 40 Number 6; June 1998)
ASHRAE JOURN 37-12 HHSGG-1995 ASHRAE Journal (Volume 37@ Number 12; December 1995)
ASHRAE JOURN 39-2 TV-1997 ASHRAE Journal (Volume 39@ Number 2; February 1997)
ASHRAE JOURN 37-7 GBH-1995 ASHRAE Journal (Volume 37@ Number 7; July 1995)
ASHRAE JOURN 40-3 ATA-1998 ASHRAE Journal (Volume 40 Number 3; March 1998)
ASHRAE JOURN 39-9 MP-1997 ASHRAE Journal (Volume 39 Number 9@ September 1997)
ASHRAE JOURN 37-11 HDSMPA-1995 ASHRAE Journal (Volume 37@ Number 11; November 1995)
ASHRAE JOURN 38-12 EEB-1996 ASHRAE Journal (Volume 38@ Number 12; December 1996)
ASHRAE JOURN 38-1 AASI-1996 ASHRAE Journal (Volume 38@ Number 1; January 1996)
ASHRAE JOURN 39-7 VVA-1997 ASHRAE Journal (Volume 39 Number 7@ July 1997)

Korean Agency for Technology and Standards (KATS)

KS B 3706-2002(2012) Glossary of terms for milling cutters
KS B 3706-1992 Glossary of terms for milling cutters

International Organization for Standardization (ISO)

ISO 23123:2020 Corrosion control engineering life cycle - General requirements

Standards Norway

NS 9430:2022 General conditions of contract for waste collection at regular intervals

International Telecommunication Union (ITU)

ITU-T N.54-1976 Definition and duration of the line-up period and the preparatory period

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO 150-1:2015 Expiration dates for food products -Part 1 : Mandatory expiration dates

The Directorate General of Specifications and Metrology (DGSM)

OS GSO 150-1:2013 Expiration dates for food products -Part 1 : Mandatory expiration dates

Indonesia Standards

SNI 7783-3:2022 Poultry feed – Part 3: Laying period (layer)