time error range

time error range, Total:133 items.

The international standard classification for "time error range" includes: Measurement of force, weight and pressure , Ceramic products , Photographic equipment. Projectors , Limits and fits .

The Chinese standard classification for "time error range" includes: Temperature and pressure instrument , Daily use ceramics products , Optical instrument in general , Basic standards and general methods .

未注明发布机构

DIN 58700-1:1971 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
DIN EN ISO 217 E:2013-01 Nomenclature and tolerances for original and auxiliary ranges of paper uncut dimensions and designation of machine directions (draft)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 11337-1989 Measurement of departures from flatness
GB/T 27504-2011 Pressure gauge error table
GB/T 11337-2004 Measurementof departures from flatness
GB/T 11336-1989 Measurement of departures from straightness
GB/T 7242-1987 Centering errors of lenses
GB/T 11336-2004 Measurement of departures from straightness

Military Standard of the People's Republic of China-General Armament Department

GJB 3733-1999 Aviation maintenance error levels, scope and classification

Professional Standard - Aviation

HB 7-1-1968 error curve clamp

Professional Standard - Machinery

JB/T 7557-1994 Coaxiality Error Detection
JB/T 9277-1999 Pressure gauge error meter

National Metrological Technical Specifications of the People's Republic of China

JJF 1447-2014 Calibration specification for ultrasonic flaw detector by time-of-flight diffraction
JJF 1027-1991 Technical Norm for Error of Measurements and Interpretation of Data

National Metrological Verification Regulations of the People's Republic of China

JJG 488-2018 Instantaneous Daily Clock Time Difference Testers

VDI - Verein Deutscher Ingenieure

VDI 3393-1975 Grinding errors
VDI 3393-1999 Grinding errors
VDI/VDE 2616-1978 Hardness testing of metallic materials; selection criteria: methods of hardness testing@ application@ advantages-disadvantages@ range of hardness test@ error limits
VDI 3393-2014 Eingrenzung von Schleiffehlern
VDI 3633 Blatt 4-1995 Selection of simulation tools - Scope of performance and distinguishing criterias

VN-TCVN

TCVN 2262-1977 Permitted errors when measuring dimensions up to 500 mm

German Institute for Standardization

DIN 58700-1:1978 ISO-limits and fits; selection of tolerance zones for fine-mechanics, tolerance zones, nominal deviations
DIN 68101:2012 Fundamental deviations and tolerance zones for wood working and wood processing
DIN 68101:1984 Fundamental deviations and tolerance zones for wood working and wood processing
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 55303-5:1987 Statistical interpretation of data; determination of a statistical tolerance interval
DIN EN ISO 217:2008 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2008); German version EN ISO 217:2008
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN EN 61025:2007 Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007
DIN 878:2018-07 Geometrical product specifications (GPS) - Mechanical dial gauges - Limits for measurement errors

HU-MSZT

MSZ 180/7-1990 Color matching systems and tolerance ranges
MSZ 6552-1959 Measurement error
MSZ 6550-1965 structural error
MSZ 7492-1980 Error and error concept of big wheels and saw blades
MSZ 737-1984 Measurement error up to 500 mm
MSZ 19785-1981 Error in fan operating parameters

Danish Standards Foundation

DS 815:1992 Selection of tolerance zones for general purposes
DS/EN 644:1994 Paper. Untrimmed sized. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture

RU-GOST R

GOST 25348-1982 Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 8.357-1979 State system for ensuring the uniformity of measurements. Laser radiation measuring instruments. Energy, spectral and time renges
GOST 26783-1985 Error rate meters for time division multiplex transmission systems. Types and basis parameters
GOST 27384-2002 Water. Rates of measurement error of characteristics of composition and properties
GOST ISO 217-2014 Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges and indication of machine direction

Standard Association of Australia （SAA）

AS 4687.3:2022 Temporary fencing and hoardings, Part 3: Temporary hoardings
AS 4687.2:2022 Temporary fencing and hoardings, Part 2: Temporary fencing and temporary pedestrian barriers
AS 4687:2007 Temporary fencing and hoardings
AS 4687.4:2022 Temporary fencing and hoardings, Part 4: Temporary swimming pool fencing
AS 4687.1:2022 Temporary fencing and hoardings, Part 1: General requirements
AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

RO-ASRO

STAS 7772-1967 Alternating current systems, equipment and devices. Normal frequency from 0.1 to 10 000 Hz and error range
STAS 7444-1979 SEEDS FOR SOWING Test reports and permissible differences between tests
STAS 8221-1968 ISO system tolerance and calibration system. Inner diameter gauge. Manufacturing Tolerances and Wear Ranges
STAS 8102-1968 ISO system tolerance and calibration system. Common tolerance range shafts in sizes up to 500mm
STAS 8109-1968 ISO system tolerance and calibration system. Selected shafts with tolerance range from 500 to 3150mm
STAS 2575-1951 Tolerances and calibration. Backlash and overtightening range for single-axis systems
STAS 8106-1968 ISO system tolerance and calibration system. For precision machinery industry, shaft with tolerance range up to 18mm
STAS 11232/3-1980 STABILIZED POWER SUPPLIES, D.C. OUTPUT Measurement of errors due to source and load Specifications

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 2085-2015 Y′D′ZD′X Color-Difference Computations for High Dynamic Range X′Y′Z′ Signals

AT-ON

ONORM M 6775 Teil.4-1987 Accuracy of bevel gears; tolerances for shaft angle errors and common apex errors
ONORM EN 644-1994 Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture
ONORM M 6770-3-2000 Accuracy of cylindrical gears - Runout Fr
ONORM M 6775 Teil.3-1986 Accuracy of bevel gears; tolerances for composite errors

YU-JUS

JUS D.E1.013-1988 Fundamenta! deviation and tolerance zones for vvorking and wood processing
JUS M.C2.204-1989 Parallel pins, hardened (dovvel pins), tolerance zone rr>6
JUS M.A1.411-1978 Tolerances in mechanical engineering. Tolerances for sizes without tolerance indication. Permissible deviation ofform and position
JUS D.A8.061-1985 Testing ofplywood. Mistake measuring

GSO

GSO ISO 12573:2015 Aircraft -- Tubing tolerances -- Inch series

BE-NBN

NBN E 02-001-1974 Selection of tolerance ranges and recommended adjustments

SCC

05/30134607 DC ISO 22110. Milk and milk products. Sampling. Inspection by variables in the presence of measurement error
AWWA ACE92220 Is It Time to Revise the AWWA Range Specifications for Water Meters?
DANSK DS/ISO 370:1980 Toleranced length measurements. Conversion ratio between millimeters and English inches
BS PD ISO/TR 5602:2021 Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
BS PD CEN ISO/TR 5602:2022 Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
DANSK DS/ISO/TR 5602:2021 Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
11/30229203 DC BS 1722-18. Fences. Part 18. Specification for free-standing temporary steel mesh perimeter fencing systems
NS-EN 644:1999 Paper — Untrimmed sizes — Primary range and supplementary range designation and tolerances, expression of direction of manufacture
NS-EN 644:1993 Paper — Untrimmed sizes — Primary range and supplementary range designation and tolerances — Expression of direction of manufacture
UNE-EN 644:1999 PAPER. UNTRIMMED SIZES. PRIMARY RANGE AND SUPPLEMENTARY RANGE DESIGNATION AND TOLERANCES. EXPRESSION OF DIRECTION OF MANUFACTURE.
BS EN 644:1994 Paper. Untrimmed sizes. Primary range and supplementary range designation and tolerances. Expression of direction of manufacture
VDI 3633 BLATT 4-1997 Selection of simulation tools — scope of services and differentiation criteria

ESDU - Engineering Sciences Data Unit

ESDU 85011 B-2013 Pitot and static errors due to non-steady flight
ESDU 85011 A-1991 Pitot and static errors due to non-steady flight.
ESDU 86006 A-1992 Pitot and static errors in steady level flight.

Aeronautical Radio Inc.

ARINC 651-1 ITEM 4.0-1997 Fault Tolerance

United States Navy

NAVY MIL-P-82534 NOTICE 1-1986 PROGRAMMER, RANGE AND AIRFRAME SEPARATION MARK 3 MOD 1
NAVY MIL-P-82534-1968 PROGRAMMER, RANGE AND AIRFRAME SEPARATION MARK 3 MOD 1
NAVY MIL-P-82534 (2)-1969 PROGRAMMER, RANGE AND AIRFRAME SEPARATION MARK 3 MOD 1

British Standards Institution (BSI)

BS EN 61025:2007 Fault tree analysis (FTA)
BS EN ISO 217:2013 Paper. Untrimmed sizes. Designation and tolerances for primary and supplementary ranges, and indication of machine direction
BS EN ISO 217:2008 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T G.135 SPANISH-1988 Error on the Reconstituted Frequency

Association of German Mechanical Engineers

VDI 3393-2016 Limiting of grinding errors

International Organization for Standardization (ISO)

ISO/TR 5602:2021 Sources of error in the use of electrochemical impedance spectroscopy for the investigation of coatings and other materials
ISO 217:1995 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction
ISO 217:2008 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction

International Telecommunication Union (ITU)

ITU-T G.8260 AMD 2-2014 Definitions and terminology for synchronization in packet networks - Amendment to the definition of time error
ITU-T O.82 SPANISH-1988 GROUP-DELAY MEASURING EQUIPMENT FOR THE RANGE 5 TO 600 kHz
ITU-T O.82 FRENCH-1988 GROUP-DELAY MEASURING EQUIPMENT FOR THE RANGE 5 TO 600 kHz
ITU-T R.2-1989 Element Error Rate - Telegraph Transmission (Study Group IX) 1 pp

AGMA - American Gear Manufacturers Association

92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears

TR-TSE

TS 2631-1977 Statistical Interpretation Of Data - Determination Of a Statistical Tolerance Intervai

American Gear Manufacturers Association

AGMA 92FTM10-1992 The Influence of the Kinematical Motion Error on the Loaded Transmission Error of Spiral Bevel Gears
AGMA 90FTM9-1990 A Procedure That Accounts for Manufacturing Errors in the Design Minimization of Transmission Error in Helical Gears

Korean Agency for Technology and Standards (KATS)

KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 217:2008 Paper-Untrimmed sizes-Designation and tolerances for primary and supplementary ranges, and indication of machine direction
KS I 3262-2016 Recycled plastics temporary fences
KS I 3262-2014 Recycled plastics temporary fences

Institute of Electrical and Electronics Engineers (IEEE)

IEEE P802.1ASdm/D2.3, May 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction
IEEE P802.1ASdm/D2.4, June 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction
IEEE P802.1ASdm/D2.5, July 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction
IEEE P802.1ASdm/D2.2, April 2024 IEEE Draft Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications - Amendment: Hot Standby and Clock Drift Error Reduction

IT-UNI

UNI ISO 5459:1986 Technical drawings. Description of geometric errors. Geometric Error Datums and Datum Systems
UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method

Indonesia Standards

SNI IEC 60904-7:2011 Photovoltaic Devices Part 7: Calculation of spectral mismatch errors when testing photovoltaic devices

BG-BDS

BGC EN 644-2000 Paper-Untrimmed sizes-Primary range and supplementary range designation and tolerances,expression of direction of manufacture

SE-SIS

SIS SMS 1341-1950 Instrument, maximum tolerance range, standard diameter exceeds 6-18
SIS SMS 1339-1950 Instrument, maximum tolerance range, maximum standard diameter exceeds 6-18
SIS SMS 1342-1950 Instrument, maximum tolerance range, minimum standard diameter exceeds 18-180

CZ-CSN

CSN ON 25 1868-1967 Digital error meter small bracket
CSN ON 25 1820-1966 Digital error meter 0,01 mm
CSN 79 5790-2001 Footwear. acceptable error

Society of Automotive Engineers (SAE)

SAE AIR1608-1994 ESTIMATION OF TOTAL ERROR IN ALTIMETRY
SAE AIR1608A-2008 Estimation of Total Error in Altimetry
SAE AIR1608B-2020 Estimation of Total Error in Altimetry

Association Francaise de Normalisation

NF E75-201:1985 BONDED ABRASIVE PRODUCTS. GENERAL FEATURES : DESIGNATION. MARKING. RANGE OF EXTERNAL DIAMETERS. TOLERANCES.
NF Q02-005:2008 Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction.

SAE - SAE International

SAE AIR1608-1989 Estimation of Total Error in Altimetry

European Committee for Standardization (CEN)

EN 644:1993 Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances - Expression of Direction of Manufacture
EN 644:1999 Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances, Expression of Direction of Manufacture

DIN

DIN 862:2015 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors

NL-NEN

NEN-EN 644-1994 Paper.Untrimmed sizes.Primary range and supplementary range designation and tolerances.Expression of direction of manufacture