Two-point endpoint method and two-point method

Two-point endpoint method and two-point method, Total:45 items.

The international standard classification for "Two-point endpoint method and two-point method" includes: Limits and fits , Linear and angular measurements , Paper and board , Measuring instruments , Glass in general , Gases for industrial application .

The Chinese standard classification for "Two-point endpoint method and two-point method" includes: Basic standards and general methods , Papermaking in general , Measuring tool and instrument , Industrial technical glass , Industrial gas and chemical gas .

---

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 45133-2025 Gas analysis—The determination of the composition of gas mixtures—Comparison methods based on one-and two-point calibration
• GB/T 4380-1984 Assessment of departure from roundness--Two and three point methods
• GB/T 23144-2023 Paper and board—Determination of bending stiffness—General principles for two-point|| three-point and four-point methods
• GB/T 4380-2004 Assessment of departure from roundness - Two-and three-point methods
• GB/T 8177-2004 Internal micrometers with two-point contact
• GB/T 8177-2024 Internal micrometers with two-point contact
• GB/T 38686-2020 Test method for flexibility of ultrathin glass—Two point bending method

AT-ON

• ONORM ISO 4292:1988 Methodsfor the assessment ofdeparture from roundness; measurement by two- and three-point methods

Bureau of Indian Standards

• IS 15374-2003 Methods for the Assessment of Departure from Roundness - Measurement by Two- and Three-Point Methods

Danish Standards Foundation

• DS/ISO 4292:1990 Methods for the assessment of departure from roundness - Measurement by two- and three-point methods

British Standards Institution (BSI)

• BS ISO 5628:2012 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
• BS ISO 5628:2019 Paper and board. Determination of bending stiffness. General principles for two-point, three-point and four-point methods
• BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
• BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
• BS 3730-3:1982(1999) Assessment of departures from roundness — Part 3 : Methods for determining departures from roundness using two - and three - point measurement
• 20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration

Korean Agency for Technology and Standards (KATS)

• KS M ISO 5628-2023 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
• KS R 5031-2003(2008) IGNITION COILS FOR MOTORCYCLES
• KS B ISO 4292-2014 Methods for the assessment of departure from roundness — Measurement by two-and three-point methods

Association Francaise de Normalisation

• NF Q03-127:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods.
• NF R14-316:1959 Reflectors. Two point attachment.
• NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration

International Organization for Standardization (ISO)

• ISO 5628:2012 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods
• ISO 5628:2019 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods
• ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration

Swedish Institute for Standards

• SS-ISO 5628:2019 Paper and board - Determination of bending stiffness - General principles for two-point, three-point and four-point methods (ISO 5628:2019, IDT)
• SS-ISO 12963:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration (ISO 12963:2017, IDT)

Electrostatic Discharge Association (ESDA)

• ESD DSTM11.13:2009 Two-Point Resistance Measurement
• ANSI/ESD STM11.13-2004 Two-Point Resistance Measurement

SE-SIS

• SIS SS-ISO 4292:1991 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods

ESD - ESD ASSOCIATION

• STM11.13-2004 Two Point Resistance Measurement
• STM11.13-2015 Two Point Resistance Measurement

Association of German Mechanical Engineers

• VDI/VDE 2189 BLATT 1-1970 Description and investigation of two- and multi-point controllers without feedback
• VDI/VDE 2189 BLATT 2-1986 Description and investigation of two- and three-point controllers with feedback
• VDI/VDE/DGQ 2618 Blatt 14-1984 Pruefanweisung fuer Innenmessschrauben mit 2-Punkt-Beruehrung am Pruefgegenstand (in Anlehnung an DIN 863 Teil 4@ Ausg. 06.81)
• VDI/VDE/DGQ 2618 Blatt 14-1991 Pruefanweisung fuer Innenmessschrauben mit 2-Punkt-Beruehrung am Pruefgegenstand (nach DIN 863 Teil 4@ Ausg. 06.81)

German Institute for Standardization

• DIN 53350:2022 Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)
• DIN 53350:2022-05 Draft Document - Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)
• DIN 53350 E:2022 Draft Document - Plastics films and sheeting - Determination of stiffness in bending - Two-point method (Ohlsen approach)

Defense Logistics Agency

• DLA MS75075 REV D-2005 SWITCH, TOGGLE, TWO POLE, UNSEALED
• DLA SMD-5962-87571 REV G-2007 MICROCIRCUIT, LINEAR, RADIATION HARDENED, TWO TERMINAL TEMPERATURE TRANSDUCER, MONOLITHIC SILICON

American Society for Testing and Materials (ASTM)

• ASTM F397-93(1999) Standard Test Method for Resistivity of Silicon Bars Using a Two-Point Probe

CZ-CSN

• CSN 21 0322-1984 Forming machines. Two point double action crank presses. Geometrical precision
• CSN 50 0358-1988 Paper and paperboard testing. Paper and paperboard stiffness determi- nation byatensometric two points method
• CSN 21 0321-1984 Forming machines. Two point single action crank presses. Geometrical precision

Others: Two-point method and standard curve method,One point method, two point method and end point method,Two-point endpoint method and two-point method,One-point endpoint method and two-point endpoint method,Two-Point Method and Emphasis