Zinc relative mass

Zinc relative mass, Total:198 items.

The international standard classification for "Zinc relative mass" includes: Metallic coatings , Welded joints , Crude petroleum , Other metalliferous minerals , Iron and steel products in general , General standards related to shipbuilding and marine structures , Surface active agents , Power stations in general .

The Chinese standard classification for "Zinc relative mass" includes: Metal chemical property test method , Basic standards and general methods , Crude petroleum , Charcoal , Material Protection , Welding and cutting , Electrical, observation/communication and navigation equipment for vessel in general , Surface active agent .

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 4045-2025 Method for Determining Relative Quality of Grains

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17282-2012 Test method for estimation of mean relative molecular mass of petroleum oils from viscosity measurements
GB/T 12496.20-1999 Test methods of wooden activated carbon-Determination of zine content
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 7739.6-2021 Methods for chemical analysis of gold concentrates—Part 6: Determination of zinc content
GB/T 2973-2004 Zinc coated steel wire test method for gravimetric determination of zine coating
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2003 Test method for gravimetric determination of mass per unit area of galvanized coatings steel products
GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements

Professional Standard - Aviation

HB 5066-1977 Quality inspection of spray galvanized layer (trial implementation)
HB 5035-1992 Quality Inspection for Zinc Coating
HB 5035-1977 Zinc coating quality inspection

Professional Standard - Nuclear Industry

EJ/T 842-1994 Zinc Isotope Ratio and Zinc Content Measurement Double Dilution Mass Spectrometry

未注明发布机构

JIS K 1428:1958(1985) Quality Specification for Chemicals - Zinc Chloride
FORD ESA-M2P121-A-1981 PAINT QUALITY, ZINC RICH PRIMER - TUBING

Professional Standard - Petroleum

SY/T 4056-1993(条文说明) Methods for Radiographic Inspection and Quality Classification of Welded Girth Butt Joints in Oil and Gas Steel Pipeline
SY/T 4056-1993 Methods for radiographic inspection and quality classification of welded girth butt joints in oil and gas steel pipeline
SY 4056-1993 Methods for Radiographic Inspection and Quality Classification of Welded Girth Butt Joints in Oil and Gas Steel Pipelines

Group Standards of the People's Republic of China

T/GDFCA 103-2023 Determination of volatile flavoured compounds in Amomi fructus Gas chromatography-mass spectrometry
T/ZJBX 10-2021 Determination of the proportion of protein hydrolysates with relative molecular weight less than 1000u in protein feed

Professional Standard-Ships

CB/T 3929-1999 X-ray inspection and quality classification for welded butt joints on aluminum alloy hull

Professional Standard - Electron

SJ/T 9550.14-1993 6F22-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.12-1993 9F120-2-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.11-1993 S4-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.22-1993 Square zinc-silver batteries--Quality grading standard
SJ/T 9550.7-1993 R20S,R20C,R20P Zinc-maganese dry cells--Quality grading standard
SJ/T 9550.15-1993 R1、R03-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.20-1993 PS-type zinc-air cells--Quality grading standard
SJ/T 9550.10-1993 R40-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.23-1993 Zinc-silver cells for astronautics--Quality grading standard
SJ/T 9550.13-1993 10F60-2-type zinc-manganese dry cells--Quality grading standard
SJ/T 9550.9-1993 R6S,R6C,R6P Zinc-maganese dry cells--Quality grading standard
SJ/T 9550.8-1993 R14S,R14C,R14P zinc-maganese dry cells--Quality grading standard

Professional Standard - Light Industry

QB/T 2345-2013 Determination of mean relative molecular weight of alkyldimethylbetain by GC

Professional Standard - Energy and Power Planning

DL/T 768.7-2002 Manufacture quality specification for electric power fittings hot dip galvanized coatings on fabricated iron and steel articles
DL/T 768.7-2012 Manufacture quality specification for electric power fittings hot dip galvanized coatings on fabricated iron and steel articles

Fujian Provincial Standard of the People's Republic of China

DB35/ 337-1999 Quality Standards for Prawn Seeds

American Society for Testing and Materials (ASTM)

ASTM D3674-89(1993)e1 Determination of relative extrusion mass of carbon black
ASTM A526/A526M-85 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Commercial Quality
ASTM A385-00 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385/A385M-22 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385-08 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A385-01 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
ASTM A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-D
ASTM A90/A90M-11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E746-17 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM A90/A90M-13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM F557-79e1 Relative working measurement method
ASTM A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM RR-A05-1003 2007 A0090/A0090M-Standard Test Method for Weight (Mass) of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A1079-13 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A1079-12 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A1079-13e1 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-09 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D2502-24 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D2502-14(2019) Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D2502-14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM A1079-13e2 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A527/A527M-90 Specification for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process, Lock-Forming Quality
ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM E1735-19(2024) Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV

International Telecommunication Union (ITU)

ITU-R BT.1127-1994 Relative Quality Requirements of Television Broadcast Systems
ITU-R BT.1127 FRENCH-1994 Exigences de qualité relative des systèmes de radiodiffusion télévisuelle
ITU-R BT.1127 SPANISH-1994 Relative Quality Requirements of Television Broadcast Systems
ITU-T P.72-1980 Measurement of reference equivalents and relative equivalents
ITU-T P.72-1984 Measurement of reference equivalents and relative equivalents
ITU-T P.72-1976 Measurement of reference equivalents and relative equivalents

Ente Nazionale Italiano di Unificazione

UNI 2014:1942 Zinc b. Qualities and requirements.
UNI 3718:1956 Zinc alloy castings. Qualities, requirements, tests.
UNI 2013:1974 Zinc ingots, first fusion. Quality and requirements
UNI ISO 7708:1998 Air quality - Particle size fraction definitions for health-related sampling.
UNI 3717:1956 Zinc alloy lingots. Qualities, requirements, tests.
UNI EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
UNI ISO 6058:2009 Water quality - Determination of calcium content - EDTA titrimetric method

AR-IRAM

IRAM 10503-1958 Method for determination of relative specific mass of stirred soil

Canadian Standards Association (CSA)

CSA G162.1-M1977-1977(R2003) Methods of Determining Mass of Coating on Zinc-Coated (Galvanized) Steel Wire

Indonesia Standards

SNI 06-1137-1989 Water, Test methods for zinc content

The American Road & Transportation Builders Association

AASHTO T 65M/T 65-2023 Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2019 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
AASHTO T 65M/T 65-2013(2017) Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings [ASTM Designation: A 90/A 90M-11]

Swedish Institute for Standards

SS 142122:1985 Steel - Hot-dip Zn- or AlZn-coated steel sheet - Structural quality
SS-EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014)

SE-SIS

SIS SS 14 12 70-1979 Hot-dip zinc coated steel sheet — Structural quality
SIS 14 21 21-1974 Hot-dip zinc coated steel sheet. Structura quality
SIS 14 21 22-1974 Hot-dip zinc coated steel sheet. Structural quality
SIS 14 12 70-1974 Hot-dip zinc coated steel sheet. Structural quality
SIS 14 13 60-1974 Hot-dip zinc coated steel sheet. Structural quality

IN-BIS

IS 6745-1972 Method for determination of quality of zinc coating on galvanized steel products

National Association of Corrosion Engineers (NACE)

NACE Paper 10876-2018 Meaningful Tests for the Quality of Superduplex Stainless Steels (SDSS)

American Water Works Association (AWWA)

AWWA JAW18151 Journal AWWA — Effects of Water Quality Parameters on the Corrosion of Galvanized Steel
AWWA ACE68865 Benefits of Nitrification Relative to Metal Release from Galvanized Pipes
AWWA JAW20486 Journal AWWA — The Effects of Short-Term Changes in Water Quality on Copper and Zinc Corrosion Rates
AWWA ACE70834 A Comparison of Zinc Versus Non-Zinc Corrosion Control for Lead and Copper

RO-ASRO

STAS 289/1-1988 COPPER-ZINC AI.LOY PLATES Quality technical requirements
STAS 2430/1-1984 COPPER-ZINC ALLOY PLATES Technical requirements for quality
STAS 390/1-1984 COPPER-ZINC ALLOYS WIRE Teehnical requirements for quality
STAS 291/1-1984 COPPER-Z1NC ALLOYS ROl'ND BARS TcchnicaJ requireinents for quality
STAS 11401-1980 COLD-FORMED ZINC COATED STEEL SECTIONS Technical requirements for quality
STAS 291/1-1989 COPPER ZINC ALI.OY ROUND BARS Quality tcchnical requirements
STAS 389/1-1984 RECTANGULAR COPPER-ZINC ALLOY BARS Tcclmical rcquiremenls for quality
STAS 521/1-1984 GOPPER-ZINC ALLOY DRAWN ROUND TUBES Quality technical requiremenls
STAS 6925/1-1986 ZINC ALLOYS FOR CASTING UNDER PRESSURE Grades and technical requircments for quality
STAS 292/1-1984 COPPER-ZINC ALLOY SQUARE DRAWN BARS Technical requirements for quality
STAS 293/1-1984 COPPER-ZINC ALLOY HEXAGO- NAL DRAWN BARS Technical requircments for quality
STAS 3439/1-1984 GOPPER-ZINC ALLOYS WITH NICKEL FOR SPR1NS Technical requirement for quality

CU-NC

NC 26-73-6-1987 Drugs. Borazinc with Ephedrine Collyrium. Quality Specifications

IT-UNI

UNI 2013-1974 Primary cast zinc ingot. quality and regulations

Standard Association of Australia （SAA）

AS 1881:1986 Zinc alloys - Casting ingots and castings - Quality requirements
AS 4699:2000 Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
AS 4699:2000(R2016) Zinc and zinc alloys - Determination of impurities and alloying elements - Atomic emission spectrometric method
AS 1580.504.1:2005 Paints and related materials - Methods of test - Metallic zinc content

ETSI

ETSI TR 101 802 V1.1.1 (2000-06)-2000 Speech Processing, Transmission and Quality Aspects (STQ); The Concept of Relative Levels

Gosstandart of Russia

GOST 24523.6-2023 Electrotechnical periclase. Method for determination of loss on ignition
GOST 13997.2-2024 Zirconium-Containing Refractory Materials and Products. Methods for Determining Relative Mass Change on Calcination
GOST R 57532-2017 Dusts of non-ferrous metallurgy enterprises. Methods of zinc mass content measuring
GOST R 56344-2015 Butadiene. Determination of purity and content of hydrocarbon impurities by gas chromatography method
GOST 29030-1991 Fruit and vegetable products. Pycnometric method for determination of relative density and soluble solids content

Magyar Szabványügyi Testület

MSZ 7337-1984 Inspection of quality requirements for zinc coated containers

British Standards Institution (BSI)

BS EN ISO 19232-2:2013 Non-destructive testing. Image quality of radiographs. Determination of the image quality value using step/hole-type image quality indicators
BS 443:1982(1998) Specification for Testing zinc coatings on steel wire and for quality requirements
BS ISO 3575:2025 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
BS ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
BS 443:1982 Specification for testing zinc coatings on steel wire and for quality requirements

German Institute for Standardization

DIN 2444:1984 DIN 2444 Quality standard for zinc-coated steel pipes
DIN 58188:1991 Quality evaluation of optical systems - Determination of relative irradiance in the image plane
DIN 58188:1991-11 Quality evaluation of optical systems - Determination of relative irradiance in the image plane
DIN EN ISO 17994:2004 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
DIN EN ISO 17994:2014-06 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014); German version EN ISO 17994:2014
DIN VDE 0472-801:1986 Testing of cables, wires and flexible cords; quality of zinc coatings
DIN EN ISO 17994 E:2012-10 Requirements for comparing relative recovery rates of microorganisms using dual quantitative methods for water quality (draft)
DIN 50602:1985 Metallographic examination; microscopic examination of special steels using standard diagrams to assess the content of non-metallic inclusions

ETSI - European Telecommunications Standards Institute

TR 101 802-2000 Speech Processing@ Transmission and Quality Aspects (STQ); The Concept of Relative Levels (V1.1.1)

Korean Agency for Technology and Standards (KATS)

KS F ISO 16985:2006 Wood-based panels-Determination of dimensional changes associated with changes in relative humidity
KS F ISO 16985:2013 Wood-based panels－Determination of dimensional changes associated with changes in relative humidity
KS M 1071-8-2022 Guide for determination of the relative density of chemical substances
KS M 1071-8-2017(2022) Guide for determination of the relative density of chemical substances
KS M 1071-8-2017 Guide for determination of the relative density of chemical substances
KS I ISO 17994-2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
KS D 1741-1987 Zinc - Determination of zinc content
KS I ISO 17994:2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
KS D 1928-2003(2018) Detection of Hexavalent Chromium on Zinc and Zinc/Aluminum alloy coated Steel
KS M ISO 6841-2007(2018) Surface active agents－Technical straight-chain sodium alkylbenzenesulfonates－Determination of mean relative molecular mass by gas-liquid chromatography

International Organization for Standardization (ISO)

ISO 16985:2003 Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
ISO 4998:2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
ISO 4998:1977 Continuous hot-dip zinc-coated carbon steel sheet of structural quality
ISO 4998:2023 Steel sheet, zinc‐coated and zinc‐iron alloy‐coated by the continuous hot‐dip process, of structural quality
ISO 49:1994/Amd 1:2018 Malleable cast iron fittings threaded to ISO 7-1 — Amendment 1: Chemical composition of the zinc coating — adjustment to actual requirements regarding hazardous substances
ISO/DIS 3575:2024 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
ISO/CD 3575:2023 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
ISO 15208:2022 Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality

NL-NEN

NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density
NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density

Association Francaise de Normalisation

NF EN ISO 17994:2014 Water quality - Requirements for comparison of relative performance of microorganisms by two quantitative methods
NF T90-462*NF EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
NF C27-210:1979 Measurement of relative permittivity dielectric dissipation factor and D.C. Resistivity of insulating liquids.

PL-PKN

PN C04609-1972 Water and wastewater Preliminary qualitative assessment of the corrosive effect of cold natural water on cast iron, ordinary steel or galvanized steel pipes
PN H04805-11-1991 Zinc powder Determination of acid insoluble matter content
PN M69770-1972 Industrial radiography Quality requirements and recommended practice for radiographic inspection of steel fusion welded butt joints

AASHTO - American Association of State Highway and Transportation Officials

T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2011 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

Danish Standards Foundation

DANSK DS/EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 17994:2017 Water quality -- Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 17994:2015 Water quality -- Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
OS GSO ISO 6841:2013 Surface active agents - Technical straight-chain sodium alkylbenzenesulfonates - Determination of mean relative molecular mass by gas-liquid chromatography

CO-ICONTEC

ICONTEC 1892-1983 quality control, quality system, related terms
ICONTEC 1521-1980 Paste for making impressions on teeth, eugenol zinc oxide

GCC Standardization Organization

GSO ASTM A1079:2021 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
GSO ISO 10251:2013 Copper, lead, zinc and nickel concentrates -- Determination of mass loss of bulk material on drying
GSO ISO 3575:2021 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities

BE-NBN

NBN P 33-003-1985 CHEMICAL ANALYSIS OF CONCENTRATED ZINC MINERALS INTENDED FOR MARKETING PRECISE DOSAGE OF ZINC BY COMPLEXOMETRY AFTER SELECTIVE EXTRACTION OF ZINC

American Petroleum Institute (API)

API 26-60115-1971 AIR QUALITY MONOGRAPHS Monograph #70-16 Cadmium@ Zinc And Mercury

Spanish Association for Standardization (UNE)

UNE 55-806-1990 Determination of relative molecular mass of linear sodium alkylphenyl sulfate detergent by gas-liquid chromatography
UNE 55-807-1991 Surface active agents. Technical alkane sulfonates. Determination of the mean relative molecular mass of the alkane monosulfonates and the alkane monosulfonate content

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE CH-06-1-1-2006 Combining Radiant and Convective Systems with Thermal Mass for a More Comfortable Home

CZ-CSN

CSN 05 1021 Cast.14-1988 Welding.Analysis of aerosols generated in wel- ding. Determination of zinc content

IPC - Association Connecting Electronics Industries

IPC 9151C-2010 Process Capability@ Quality@ and Relative Reliability (PCQR2) Benchmark Test Standard and Database
IPC 9151D-2012 Process Capability@ Quality@ and Relative Reliability (PCQR2) Benchmark Test Standard and Database

European Telecommunications Standards Institute (ETSI)

ETSI TR 101 802-2000 Speech Processing, Transmission and Quality Aspects (STQ); The Concept of Relative Levels (V1.1.1)

GM North America

GM GM9738P-1988 Zinc Content of Zinc-Rich Primer

CEN - European Committee for Standardization

EN ISO 15175:2018 Soil quality - Characterization of contaminated soil related to groundwater protection

European Committee for Standardization (CEN)

EN ISO 15175:2011 Soil quality - Characterization of soil related to groundwater protection (ISO 15175:2004)