Shunt used for testing

Shunt used for testing, Total:184 items.

The international standard classification for "Shunt used for testing" includes: Powder metallurgy , Paints and varnishes , Power transmission and distribution lines .

The Chinese standard classification for "Shunt used for testing" includes: Technical Management , Metal physical property test method , Basic standard and general method for coating , .

Professional Standard - Electron

SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
SJ 443-1973 Method of measurement for cathode heating time of high-voltage rectifier tubes
SJ/Z 9010.8-1987 Measurements of electrical properties of electronic tubes and valves--Part 8: Measurement of cathode heating time and heater warm-up time

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures

未注明发布机构

ASTM RR-C08-1016 1999 C1446-Test Method for Determining Consistency and Working Time of Self Flowing Castable
DIN EN ISO 2431:1996 Determination of flow time of paints and varnishes by use of flow cups
DIN EN ISO 2431 E:2018-08 Determination of flow time of paints and varnishes using flow cups (draft)
DIN EN 1267:1999 Valves – Test of flow resistance using water as test fluid

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6753.4-1998 Paints and varnishes-Determination of flow time by use of flow cups

国家能源局

SY/T 6797-2020 Real-time measuring and adjusting tool for water injection well’s layered flowrate

Professional Standard - Petroleum

SY 6977-2014 Calibration method of real-time measuring and adjusting instrument for stratified flow in water injection well
SY/T 6797-2010 Real-Time Measuring and Adjusting Instrument of Flooding Well's Layered Flux
SY/T 6977-2014 The calibration method of real-time measuring and adjusting instrument of flooding wells layered flux

Professional Standard - Light Industry

QB/T 3815-1999 Thickness testing method of the metal deposits for the light industrial products Timekeeping of liquid flow method

Group Standards of the People's Republic of China

T/JSGT 003-2020 Exhaust gas velocity and flow monitoring Ultrasonic time difference method

Professional Standard - Traffic

JT/T 838-2012 Flow time tester for fine aggregate

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35138-2017 Measurement of fluid flow in closed conduits-Ultrasonic transit-time meters for liquid
GB/T 15544.4-2017 Short-circuit current calculation in three-phase a.c. systems―Part 4:Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth

SCC

BS 3900-A6:1986 Methods of test for paints-Determination of flow time by use of flow cups
BS 37-8:1959 Specification. Electricity meters-Alternating current precision kilowatt-hour meters for testing purposes
UNE 83364:2007 Self-compacting concrete. Determination of the flow time. V-funnel test.
BS 3900-A6:1971 Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of flow time by use of flow cups
DANSK DS/ISO 2431:2019 Paints and varnishes – Determination of flow time by use of flow cups
ASME MFC-5M-1985(R2006) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
AASHTO TP 99-2013(2015) Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
AASHTO T 390-2022 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
AASHTO TP 99-2012 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
DANSK DS/EN ISO 2431:2019 Paints and varnishes – Determination of flow time by use of flow cups (ISO 2431:2019)
NS-EN ISO 2431:2011 Paints and varnishes — Determination of flow time by use of flow cups (ISO 2431:2011)
BS 37-10:1961 Specification. Electricity meters-Alternating current high precision kilowatt-hour meters for efficiency testing of electrical plant
CEI EN 60068-2-30:2006 Environmental testing - Part 2: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
10/30206993 DC BS EN ISO 2431. Paints and varnishes. Determination of flow time by use of flow cups
NS-EN 12846:2002 Bitumen and bituminous binders — Determination of efflux time of bitumen emulsions by the efflux viscometer
UNE 21239-3:1999 SHORT-CIRCUIT CURRENT CALCULATION IN THREE-PHASE A.C. SYSTEM. PART 3: CURRENT DURING TWO SEPARATE SIMULTANEOUS SINGLE PHASE LINE-TO-EARTH SHORT CIRCUITS AND PARTIAL SHORT-CIRCUIT CURRENTS FLOWING THROUGH EARTH.
DANSK DS/EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests – Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
NS-EN 535:1991 Paint and varnishes — Determination of flow time by use of flow cups — (ISO 2431:1984 modified)
DIN EN 1267 E:2009 Draft Document - Industrial valves - Test of flow resistance using water as test fluid; German version prEN 1267:2009
DIN SPEC 91143-2:2012 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
AENOR UNE-EN 14187-2:2017 Cold applied sealing products. Test methods. Part 2: Determination of tack time.
DIN EN ISO 2431 E:2018 Draft Document - Paints and varnishes - Determination of flow time by use of flow cups (ISO/DIS 2431:2018); German and English version prEN ISO 2431:2018
NS-EN 12846-1:2011 Bitumen and bituminous binders — Determination of efflux time by the efflux viscometer — Part 1: Bituminous emulsions
DANSK DS/EN 12846-1:2011 Bitumen and bituminous binders – Determination of efflux time by the efflux viscometer – Part 1: Bituminous emulsions
NS-EN 12846-1:2022 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
UNE 20160:1981 MEASUREMENT OF THE WINDING RESISTANCE OF AN ALTERNATING CURRENT MACHINE DURING OPERATION AT ALTERNATING VOLTAGE
11/30229950 DC BS EN 61083-4. Instruments and software used for measurements in high-voltage and high-current tests. Part 4. Requirements for software for tests with alternating and direct currents and voltages

GSO

OS GSO 509:1994 Methods of test for Paints and Varnishes - Determination of time of how by use of flow cups.
GSO 509:1994 Methods of test for Paints and Varnishes - Determination of time of how by use of flow cups.
GSO ISO 9073-13:2013 Textiles -- Test methods for nonwovens -- Part 13: Repeated liquid strike-through time
OS GSO ISO 12242:2015 Measurement of fluid flow in closed conduits -- Ultrasonic transit-time meters for liquid

IN-BIS

IS 3944-1982 How to measure flow time using a flow cup
IS 11426-1985 Specification for glass 0.5 AC precision kilowatt-hour electric meters for testing
IS 13107 T-1991 Measurement of winding resistance of AC motors when operating at AC voltage

European Committee for Standardization (CEN)

EN 535:1991 Paints and varnishes; determination of flow time by use of low cups (ISO 2431:1984 modified)
EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
EN ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
prEN 12846-2-2021 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
prEN 22431-1990 Paints and varnishes; determination of flow time by use of flow cups (ISO 2431, edition 1984 modified)
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
prEN 12846-1-2021 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions

CZ-CSN

CSN 65 7082-1980 Determination of the efflux time
CSN 67 3013-1980 Paints and varnishes. Determination of flow time by use of flow cup

Indonesia Standards

SNI 03-6431-2000 Test methods for flow time of fiber-reinforced concrete through inverted slump cone

International Organization for Standardization (ISO)

ISO 12242:2012 Measurement of fluid flow in closed conduits - Ultrasonic transit-time meters for liquid
ISO 2431:1993 Paints and varnishes; determination of flow time by use of flow cups
ISO 2431:1984 Paints and varnishes — Determination of flow time by use of flow cups
ISO 2431:1980 Paint and varnishes — Determination of flow time by use of flow cups
ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
ISO 2431:2011 Paints and varnishes - Determination of flow time by use of flow cups
ISO 2431:1972 Title missing - Legacy paper document
ISO 2431:1993/Cor 2:1999 Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 2
ISO 2431:1993/Cor 1:1994 Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 1
ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium - Method for the determination of flow time
ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO 3425:1975 Sulphur for industrial use; Determination of ash at 850-900 degrees C and of residue at 200 degrees C

AT-ON

ONORM EN 535-1992 Paints and varnishes — Determination of flow time by use of flow cups

BE-NBN

NBN T 03-383-1981 Sulphur for industrial use - Determination of loss in mass at 80 °C
NBN-EN 535-1992 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431, edition 1984 modified)

British Standards Institution (BSI)

BS EN ISO 2431:1996 Paints and varnishes - Determination of flow time by use of flow cups
BS EN ISO 2431:2011 Paints and varnishes. Determination of flow time by use of flow cups
BS EN ISO 2431:2019 Paints and varnishes. Determination of flow time by use of flow cups
BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS EN ISO 4490:2002 Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter)
BS 5857-1.5:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow. Transit time method using radioactive tracers
BS ISO 18843:2015 Aluminium oxide primarily used for the production of aluminium. Method for the determination of flow time
BS EN 60909-3:2010 Short-circuit currents in three-phase a.c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth
BS EN 60909-3:2004 Short-circuit current calculation in three-phase a.c. systems - Currents during two separate simultaneous single phase line-to- earth short circuits and partial short-circuit currents flowing through earth
BS 5857-2.4:1980 Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow. Transit time method using radioactive tracers
BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO 24062:2023 Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases

Association Francaise de Normalisation

NF P18-469:2023 Essai pour béton frais - Temps d'écoulement au cône
NF T30-070:1996 Paints and varnishes. Determination of flow time by use of flow cups.
NF T30-070:2011 Paints and varnishes - Determination of flow time by use of flow cups.
NF T30-070*NF EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups
NF EN 960:2006 False heads for use when testing protective helmets
NF X10-334*NF EN ISO 6416:2017 Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method
NF EN ISO 13517:2020 Metal powders - Determination of flow time using a calibrated funnel (Gustavsson flow cone)
NF EN 60068-2-30:2006 Environmental tests - Part 2-30: tests - Db test: cyclic damp heat test (12 h + 12 h cycle)
NF C41-083-3:2021 Instruments and software used for measurement in high-voltage and high current tests - Part 3 : requirements for hardware for tests with alternating and direct voltages and currents
NF ISO 14934-4:2015 Fire testing - Calibration and use of heat flow measuring devices - Part 4: guidelines for the use of heat flow meters in fire testing
NF T70-359:1996 Energetic materials for defense. Physico-chemical analysis and properties. Measurement of the duration of the outflow on the tnt or tnt compositions with the efflux viscosimeter

KR-KS

KS M ISO 2431-2022 Paints and varnishes — Determination of flow time by use of flow cups
KS M ISO 1388-12-2017 Ethanol for industrial use — Methods of test — Part 12: Determination of permanganate time
KS B ISO 6416-2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method

Danish Standards Foundation

DS/ISO 2431:1982 Paints and varnishes. Determination of flow time by use of flow cups
DS/EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups
DS/EN 12846-2:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
DS/EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DS/EN 12846-1:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions

German Institute for Standardization

DIN EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011); German version EN ISO 2431:2011
DIN EN ISO 2431:2020-02 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09); German version EN ISO 2431:2019
DIN EN 60068-2-30:2006-06 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005 / Note: DIN EN 60068-2-30 (2000-02) remains valid alongside this standard until 2008-11-01.
DIN EN 12846-2:2023 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
DIN EN 13409:2002-06 Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002
DIN EN 12846-1:2023 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions
DIN EN 12846-1:2023-02 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions; German version EN 12846-1:2022
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN 60909-3:2010 Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009); German version EN 60909-3:2010

Korean Agency for Technology and Standards (KATS)

KS M ISO 2431:2012 Paints and varnishes－Determination of flow time by use of flow cups
KS M ISO 2431-2012(2017) Paints and varnishes－Determination of flow time by use of flow cups
KS M ISO 2431:2022 Paints and varnishes — Determination of flow time by use of flow cups
KS D 0035-2006 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS B ISO 6416:2021 Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method
KS D 0035-1985 Metallic powders－Determination of flow time by means of a calibrated funnel(hall flowmeter)
KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS B ISO TR 12765-2020 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS B ISO TR 12765-2005(2020) Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS M ISO 3425:2002 Sulphur for industrial use－Determination of ash at 850∼900°C and of residue at 200°C
KS M ISO 3425:2017 Sulphur for industrial use — Determination of ash at 850-900

CEN - European Committee for Standardization

EN ISO 2431:1996 Paints and Varnishes - Determination of Flow Time by Use of Flow Cups

VN-TCVN

TCVN 2092-2008 Paints and varnishes.Determination of flow time by use of flow cups

SE-SIS

SIS SS 18 41 16-1983 Paints and varnishes - Determination of flow time by use of flow cups
SIS SS-EN 535-1991 Paints and varnishes — Determination of flow time by use of flow cups
SIS SS 02 01 21-1980 Atmospheres and times for testing

Standard Association of Australia （SAA）

AS 2879.9:2002(R2013) Determination of alumina flow time
AS 2879.9:2002 Alumina - Determination of flow time

ES-UNE

UNE-EN ISO 2431:2020 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)
UNE-EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (Endorsed by Asociación Española de Normalización in May of 2021.)

RO-ASRO

STAS 8931-1971 PRINTING INKS Determination of flow time
STAS 2096-1968 Lacquer and paint. Determination of seepage time
STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement

International Telecommunication Union (ITU)

ITU-T R.116-1989 Maintenance Tests to Be Carried out on International TDM Systems - Telegraph Transmission (Study Group IX) 5 pp
ITU-T R.116 FRENCH-1988 MAINTENANCE TESTS TO BE CARRIED OUT ON INTERNATIONAL TDM SYSTEMS
ITU-T R.116 SPANISH-1988 MAINTENANCE TESTS TO BE CARRIED OUT ON INTERNATIONAL TDM SYSTEMS
ITU-T R.116-1988 MAINTENANCE TESTS TO BE CARRIED OUT ON INTERNATIONAL TDM SYSTEMS
ITU-T P.501-2012 Test signals for use in telephonometry (Study Group 12)

American Society of Mechanical Engineers (ASME)

ASME MFC-5.1-2011(R2018) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters

HU-MSZT

MSZ KGST 1443-1978 Measurement of paint overflow time using measuring cup

Lithuanian Standards Office

LST EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
LST EN 12846-2-2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
LST EN 60068-2-30-2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
LST EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 61083-3:2020)
LST EN 12846-1-2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions

AENOR

UNE-EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
UNE-EN 12846-2:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders
UNE-EN 12846-1:2011 Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP152-2007 DDR2 DIMM Clock Skew Measurement Procedure Using A Clock Reference Board

The American Road & Transportation Builders Association

AASHTO TP 99-2011 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
AASHTO TP 99-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
AASHTO T 390-2020 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)

AASHTO - American Association of State Highway and Transportation Officials

TP 99-2013 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
TP 99-2011 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
TP 99-2018 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)
TP 99-2012 Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous-Flow Traffic Time-Integrated Method (CTIM)

American Society for Testing and Materials (ASTM)

ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

UY-UNIT

NORMA 48-P-1947 Interim Standard for Sieve Testing of Mixtures

SG-SPRING SG

SS 78 Pt.B2-1992 Testing Concrete Part B2 : Recommendations For Surface Hardness Testing By Rebound Hammer

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61083-3:2021 Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0102-3 BERICHTIGUNG 1-2014 Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009); German version EN 60909-3:2010@ Corrigendum to
VDE 0102-3-2010 Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009); German version EN 60909-3:2010

American National Standards Institute （ANSI)

ANSI/ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters

International Electrotechnical Commission (IEC)

IEC TR 60279:1969 Measurement of the winding resistance of an a.c. machine during operation at alternating voltage

Canadian Standards Association (CSA)

CSA IEC 61000-4-34-06-CAN/CSA:2006 Electromagnetic compatibility (EMC) ?Part 4-34 :Testing and measurement techniques ?Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase

DIN

DIN EN 60909-3:2004 Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2003); German version EN 60909-3:2003

RU-GOST R

GOST 26798.1-1996 Oil-well cement. Test methods
GOST 26798.1-1985 Oil-well cements. Test methods of flowability, density, water-el: mination, thickening time and setting time
GOST 30355.2-1996 Sulphur for industrial use. Determination of ash at 850-900 °C and of residue at 200 °C

PL-PKN

PN-EN IEC 61083-3-2021-08 E Instruments and software used for measurement in high-voltage and high-current tests -- Part 3: Requirements for hardware for tests with alternating and direct voltages and currents (IEC 61083-3:2020)

Others: Shunt used for testing