Three parameter water gauge

Three parameter water gauge, Total:229 items.

The international standard classification for "Three parameter water gauge" includes: Equipment for the metallurgical industry , Other machine tool systems , Lifting appliances in general , Earth-moving machinery , Agricultural machines, implements and equipment , Plugs, socket-outlets, couplers , Milling tools , Geology. Meteorology. Hydrology , Equipment for the chemical industry , Belt drives and their components , Boilers and heat exchangers , Conveyors , Mining equipment , Navigation and control equipment , Shipbuilding and marine structures in general .

The Chinese standard classification for "Three parameter water gauge" includes: Metallurgical equipment , Metal forming machinery , Chain drive, belt drive and key joint , Machine tool element , Hoisting machinery , Asynchronous machine , Architectural engineering construction machinery , Farm, livestock, by-product and fish vehicles , Low voltage apparatus in general , Cutting tools , Hydrology and water conservancy instrument , Separating machinery , Boiler and its auxiliary equipment , Conveying machinery , Lighting and other electrical devices for vessel , Narrow gauge mining railway vehicles , Oceanographic instrumentation , Environmental monitoring instrument and its complete equipment .

Professional Standard - Machinery

JB/T 3858-1999 The type and basic data of the three roller tube winding machine
JB/T 2453-2010 The type and basic data and the size for hot metal ladle car
JB/T 2450-1999 The type and basic data and the size for slag pot car
JB/T 2452-2010 The type and basic data and the size for furnace charge transport car
JB/T 7513-1994 Taper Sleeves Type, Main Dimensions and Basic Parameters
JB/T 11497-2013 3-points Bore Gauging with Electronic Digital Display
JB/T 6554-2014 Planning Machines for Two, Three or Four-side Dressing: Parameters
JB/T 2453-1999 The type and basic data and the size for hot metal ladle car
JB/T 6554-1993 Planing Machines for Two, Three or Four-side Dressing Parameters
JB/T 2451-1999 The type and basic data and the size for mould car
JB/T 8797-1998 Middle and Small Sized Three-roll Plate Bending Machine Types and Basic Parameters
JB/T 4316.1-1999 Straight-tooth end-toothed disc Parameters and dimensions of series
JB/T 5202-1991 Multi-station Cold Former Basic Parameters
JB/T 2450-2010 The type and basic data and the size for slag pot car
JB/T 9007.1-1999 Rope pulley blocks - Types，parameters and dimensions
JB/T 2452-1999 The type and basic data and the size for furnace charge transport car

Professional Standard - Aviation

HB 6114-1986 Basic Parameter, Shape and Installation Dimension of Three-phase Gyro Motor

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 4124.9-1984 The types, parameters and main sizes of chart table lights for marine use
GB/T 13756-1992 Three-column centrifuge--Types and basic parameters
GB 1003-2008 Three phases plugs and socket-outlets for household and similar purposes - Types，basic parameters and dimensions
GB/T 18891-2024 Designation of phase differences by hour numbers in three-phase AC systems
GB/T 3166-2004 Parameters for hot water boilers
GB/T 1003-2016 Three phases plugs and socket-outlets for household and similar purposes—Types，basic parameters and dimensions
GB 987-1991 Belt conveyor idlers―Basic parameters and dimensions
GB 4124.8-1984 The types, parameters and main sizes of table lights for marine use
GB/T 3166-1988 Specifications for hot water boiler
GB 4124.5-1984 The types, parameters and main sizes of portable pendant lights for marine use
GB 1003-1999 Three phases plugs and socket-outlets for household and similar purposes Types，basic parameters and dimensions
GB/T 987-1991 Belt conveyors--Basic parameters and dimensions
GB/T 2885.5-1981 Flat deck wagon for metallic mines; Basic parameters and dimensions
GB/T 21153-2007 Earth-moving machinery—Units for dimensions performance and capacities and their measurement accuracies
GB/T 2885.6-1981 Material supply wagon for metallic mines; Basic parameters and dimensions
GB/T 5341.1-2006 Side and face milling cutters with indexable inserts - Part 1: Types and dimensions
GB/T 1003-2016(英文版) "Three phases plugs and socket outlets for household and similar purposes-Types,basic parameters and dimensions"
GB/T 11828.5-2011 Instruments for stage measurement—Part 5:Electronic gauge
GB/T 21422-2008 Tri-wheel vehicles - Operating position dimensions of driver
GB/T 32220-2015 Taper bush―Types,size and basic parameters
GB 4124.7-1984 The types, parameters and main sizes of bulkhead lights for marine use

Professional Standard - Ocean

HY/T 126-2009 Multiparameter water quality monitor

Professional Standard - Construction Industry

JGJ 35-1987(第三部分) Standard for parameter of construction atmosphere (Part 3)

Professional Standard - Culture

WH/T 17-2003 Basic parameters and dimensions of single-phase three-pole plug socket and connector type for stage lighting

Group Standards of the People's Republic of China

T/CIMA 0089-2023 Multi-parameter smart water meter

未注明发布机构

VDI VDE 2617 Blatt 2-1-2005 Accuracy of coordinate measuring machine parameters and their analysis
VDI VDE 2617 Blatt 6-1-2007 Accuracy of coordinate measuring machine parameters and their testing

Taiwan Provincial Standard of the People's Republic of China

CNS 5978-1984 Symbols, Denominations and Units for Gears Calculation
CNS 11059-1984 Three Dimensional Manikins for Use in Defining Automobile Seating Accomodations

Professional Standard-Ships

CB/T 3852.7-1999 The types parameters and main sizes of bulkhead lights for marine use
CB/T 3852.5-1999 The types parameters and main sizes of portable pendant lights for marine use
CB/T 3852.8-1999 The types parameters and main sizes of table lights for marine use
CB/T 3852.9-1999 The types parameters and main sizes of chart table lights for marine use

Hubei Provincial Standard of the People's Republic of China

DB42/T 1506-2019 Technical specifications for parametric modeling of 3D solid models

Professional Standard - Automobile

QC/T 497-1999 Types, parameters and dimensions of automobile ammeters
QC/T 500-1999 Types, parameters and dimensions of automobile pressure gauges
QC/T 499-1999 Types, parameters and dimensions of automobile thermometers
QC/T 498-1999 Types, parameters and dimensions of automobile fuel gauges

Professional Standard - Environmental Protection

HJ/T 1-1992 Fixing Installation for Gas Measuring and Sampling

Professional Standard - Aerospace

QJ 2014-1990 Basic parameters and dimensions of small modulus cylindrical gear reducer

Yunnan Provincial Standard of the People's Republic of China

DB53/T 675-2015 Control parameters of flotation process for middle and low grade collophosite

CZ-CSN

CSN 30 7066-1987 Front-power take-off. Basic parameters, dimensions and locati- on
CSN 30 7053-1982 Tractors. Towing arrangoment. Basic parameters and dimensions. Demands. Location
CSN 30 7065-1987 Front-three-point linkage. Connection dimensions, kinematic parameters and technical requirements
CSN 11 9801-1967 Hydraulics technology. Tanks. Basic parameters
CSN 72 9314-1981 Resonance screens. Main parameters and dimensions
CSN 20 0485-1983 Numerical controlled milling machines. Basic parameters and connections sizes
CSN 20 0471-1983 Numerical controlledLathesBasic parameters andconnections sizes
CSN 70 1602-1985 Glass blocks. Types, dimensions and parameters
CSN 27 4321-1984 Passenger electric lifts. Main parameters and dimensions
CSN 27 4331-1984 Freight electric lifts. Main parameters and dimensions
CSN 20 0481-1983 Numerícal controlled boring and milling machines. Basic parameters andconnections sizes
CSN 20 0475-1983 Numerical controlledvertical lathes.Basic parameters andconnection sizes
CSN ON 26 2508-1962 stable level. Basic parameters
CSN 72 9102-1980 Cone crusher. Basic parameters and dimensions
CSN 72 9310-1981 Vibrating sreens inclined. Main parameters and dimensions
CSN 14 2706-1974 Refrige rating showcases. Basic dimensions and paramcters.
CSN 30 4412-1961 Three position switch boxes with tractive control for 6 V; 12 V and 24 V Dimensions
CSN 26 2008-1983 Bucket elevators. Principal parameters and dimensions
CSN 11 3005-1988 Hydrodynamic pumps. Series of basic parameters
CSN 26 2808-1983 Screw conveyors. Parameters and main dimensions.

US-FCR

FCR COE CERC-94-1 FINAL REPORT-1994 THREE-PARAMETER CHARACTERIZATION OF SHALLOW-WATER DIRECTIONAL WIND WAVE SPECTRA

RU-GOST R

GOST 20304-1990 Three-dimensional and two-dimensional manikins. Construction, main parameters and dimensions
GOST 24135-1980 Pipe-line fastening parts. Three-seat cramps. Design and dimensions
GOST 8260-1988 Sheet stamping multiposition automatic press. Parameters and dimensions. Norms of accuracy
GOST 6414-1980 Cold headers with four die for nuts forming. Basic parameters
GOST 6414-1987 Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy
GOST 12933-1988 Cold-heading, one-position, double blow automatik machines with a closeddie. Parameters and dimensions. Norms of precision
GOST 25449-1982 Water and steam heatexchangers. Types, basic parameters and sizes
GOST 28376-1989 Compact disk. Parameters and dimensions
GOST 20763-1985 Centrifugal immersion electric pumps for polluted water. Basic parameters
GOST 27274-1987 Leather wringing machines types, main parameters, dimensions and requirements
GOST 23012-1978 Devices multiposition counting indicated and sivitching. Basic parameters
GOST 10664-1982 Three-and four-roller sheet bending machines. Parameters
GOST 3295-1973 Hypsometric tables for geopotential altitudes up 50000 m. Characteristics
GOST 700-1982 Circular rip saws. Basic parameters and dimensions
GOST 28437-2015 Side and face milling (slotting) cutters with indexable inserts. Dimensions
GOST 25298-1982 Compact treatment plants for domestic sewage water. Types, basic parameters and dimensions
GOST 24367-1987 Radial swaging machines. Parameters and dimensions
GOST 26654-1985 Electro-heat equipment. Ranges of parameters and dimensions
GOST 11370-1975 Beading machines. Basic parameters and dimensions
GOST 16829-1971 Downcut shears. Parameters and dimensions
GOST 18521-1983 Shot shooting apparatuses. Main parameters and dimensions. Technical requirements
GOST 22644-1977 Belt conveyors. Basic parameters and dimensions
GOST 22984-1978 Woodworking equipment. Curtain coating machines. Basic parameters
GOST 10767-1987 Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy
GOST 10767-1998 One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy
GOST 22931-1978 Bp type variators with wide angle belt with two adjustable pulleys. Basic parameters
GOST 22247-1996 Centrifugal and sectionpumps for handling water. Basic parameters and dimensions. Safety requirements. Control methods
GOST 22931-1993 Wide v-belt variable-speed drives. Parameters
GOST 15172-1970 Transistors. List of basic and reference electrical parameters
GOST 24985-1981 Tires with regulated pressure. Main parameters and dimensions
GOST 26673-1990 Turbo-drills. Basic parameters and dimensions
GOST 6000-1988 Condensate centrifugal pumps. Parameters and dimensions
GOST R 53770-2010 Passenger lifts. Basic parameters and dimensions
GOST 8823-1985 Electric goods lifts. Basis parameters and dimensions
GOST 25297-1982 Compact treatment plants for surface potable water. Types, basic parameters and dimensions
GOST 21608-1976 Numerically controlled lathes. Basic parameters and dimensions
GOST 24612-1981 Swing beam sheet bending numerically controlled machines. Parametrs and dimensions
GOST 21610-1982 Numerically controlled milling machines. Basic parameters and coupling dimensions
GOST 5746-1983 Passenger electric lifts. Basic parameters and dimensions
GOST 10616-2015 Radial and axial fans. Dimensions and parameters
GOST 15609-1979 Box feeders. Types, main parameters and dimensions
GOST 17394-1979 Wide profile tyres with adjusted pressure. Main parameters and dimensions
GOST 16434-1987 Forging console rolls. Parameters and dimensions
GOST 5746-2015 Passenger lifts. Basic parameters and dimensions
GOST 9309-1979 Filmstrips. Types, basic parameters and dimensions
GOST 23632-1979 Spinning ring machines. Basic parameters and dimensions
GOST 16435-1980 Forging closed rolls. Basic parameters and dimensions
GOST 25243-1989 Bicycles for children. Basic parameters and dimensions
GOST 24611-1981 Magazine pattern plates. Basic parameters and dimensions
GOST 14757-1981 Collapsable racks. Types, basic parameters and dimensions
GOST 10172-1987 Semiautomatic vertical multitool and copying lathes
GOST 20278-1990 Mill-type ladle cranes. Parameters and dimensions
GOST 30078.2-1993 Harmonic gears. Types. Main parameters and dimensions
GOST 20883-1988 Three-screw pumps and pump units. Types and basic parameters
GOST R 50057-1992 Vertical turret lathes. Basic parameters and dimensions
GOST 17487-1972 Display tubes with electromagnetic deflection. Basic parameters and dimensions
GOST 10739-1984 Automatic sheet stamping presses with underheath drive. Parameters and dimensions. Norms of accuracy
GOST 17489-1972 Vidicons, X-ray. Basic parameters and dimensions
GOST 22381-1977 Pneumatic tube systems. Types, overall parameters and dimensions
GOST 24597-1981 Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 5147-1997 Joint couplings. Parameters, design and dimensions
GOST 6031-1981 Mud pumps. Basic parameters
GOST 27378-1987 Tractors and agricultural machines. Front mounted three-pointed linkage. Mounting dimensions, kinematic parameters and technical requirements
GOST 8749-1979 Founry aerators. Types, basic parameters and dimensions
GOST 12367-1985 Tube mills of grinding units. General technical specifications
GOST 13188-1967 Cargo trucks. Types, basic technical data and dimensions
GOST 24831-1981 Package equipment. Types, basic parameters and dimensions
GOST 21613-1982 Numerically controlled vertical jig boring machines. Basic parameters and coupling dimensions
GOST 5147-1980 Joint clutches. Basic parameters. Design and dimensions
GOST 21611-1982 Numerically controlled vertical drilling machines. Basic parameters and coupling dimensions

YU-JUS

JUS U.A9.007-1981 Modular co-ordination. Reference lines of horizonta! modular dimensions
JUS K.G3.315-1984 Key type three-jaw drill chuks, form and dimensiont
JUS Z.M1.200-1990 Pallets. Basic pararaeters and dimensions

PL-PKN

PN M02291-1963 Seats for triangle nuts with collar. Dimensions
PN G46691-1972 Min? scraper corweyors two-strand and ?hrees?rand-chain Main parame?ers and dimensions
PN G56300-1969 Pneumatic p?cks Main parameters and dimensions
PN G02317-1991 Measuring meters for hydrogeology. Mechanical water level meters with boosters. Types, principal parameters and technical requirements
PN G02316-1991 Measuring meters for hydrogeology. Electrical water level meters with recorders. Types, principal parameters and technical requirements
PN A55700-1990 Evaporators Types, basie parameters and dimensions

VN-TCVN

TCVN 2849-1979 Hydraulic forging presses.Basic parameters and dimensions
TCVN 2848-1979 Pneumatic power hammers.Basic parameters and dimensions
TCVN 3594-1981 Shapers.Basic parameters and dimensions
TCVN 1084-1986 Pneumatic power forging hammers.Basic parameters and dimensions
TCVN 3592-1981 Woodworking lathers.Basic parameters and dimensions
TCVN 5190-1990 Roller conveyors.Basic parameters and dimensions
TCVN 1085-1986 Screw presses.Basic parameters and dimensions
TCVN 4063-1985 Short-range sprinklers.Main parameters and dimensions
TCVN 3596-1981 Woodworking band flat grinding machines.Basic parameters and dimensions

SE-SIS

SIS SS-ISO 6986:1985 Side and face milling (slotting) cutters with indexable inserts- Dimensions

AIA/NAS - Aerospace Industries Association of America Inc.

NASM28728/5-2014 DIAL@ CONTROL@ MULTITURN COUNTERS@ THREE-DIGITS (Rev 2)
NASM28728/5-2010 DIAL@ CONTROL@ MULTITURN COUNTERS@ THREE-DIGITS (Rev 1)
NASM28728/5-2001 Dial@ Control@ Multiturn Counters@ Three Digits
NASM28728/6-2001 Dial@ Control@ Multiturn Counters@ Three Digit@ Illuminated and Nonilluminated

CU-NC

NC 48-41-1985 Hydraulic Engineering. Hose Connection. Main Dimensions Parameters and Types
NC 97-56-1985 Packaging. Wooden Reel Parameters and Main Dimensions
NC 97-94-1987 Packaging. Welde-Steel Horizontal Cylindric Vessel Main Pararneters and Dimensions
NC 34-09-1986 Agricultural Implements. Disk Harrows. Main Dimensions and Parameters

SCC

AS 2900.12:1986 Quantities, units, and symbols - Dimensionless parameters
VDI/VDE 2617 BLATT 2.3-2004 Accuracy of coordinate measuring machines — Parameters and their testing — Acceptance and confirmation testing of large-scale coordinate measuring machines
VDI 3807 BLATT 3-2015 Consumption parameters for buildings — partial water parameters
AWWA WQTC64134 Evaluation of a Regular Measurement Program of Water Quality Parameters in a Full-Scale Non-Chlorinated Distribution System
AWWA ACE93145 Monitoring to Identify Causative Factors of Water Quality Degradation: Frequency, Parameters, and Locations
BS 5775-12:1982 Specification for quantities, units and symbols-Dimensionless parameters
AENOR UNE 21099:1966 Indicative hourly indices of the phase position for the conductors of three-phase networks.
MIL MIL-S-15743/20-1984 SWITCH, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), CONTACT MAKER, SIX-POLE, THREE-POSITION, SPRING RETURN, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOL 2641.1 (NO S/S DOCUMENT)
VDI 3807 BLATT 4-2008 Energy and water consumption indicators for buildings — partial indicators of electrical energy

GSO

OS GSO ISO 6986:2015 Side and face milling (slotting) cutters with indexable inserts -- Dimensions
BH GSO ISO 6986:2016 Side and face milling (slotting) cutters with indexable inserts -- Dimensions
GSO ISO 1127:2013 Stainless steel tubes -- Dimensions, tolerances and conventional masses per unit length

International Organization for Standardization (ISO)

ISO 6986:1983 Side and face milling (slotting) cutters with indexable inserts; Dimensions
ISO 6986:2013 Side and face milling (slotting) cutters with indexable inserts.Dimensions
ISO 17572-3:2015 Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 3: Dynamic location references (dynamic profile)
ISO 17572-3:2008 Intelligent transport systems (ITS) — Location referencing for geographic databases — Part 3 Dynamic location references (dynamic profile)

HU-MSZT

MSZ 05 KGST 1333-1978 Main parameters and dimensions of transmission

BELST

STB 1878-2008 Vehicles. Weight parameters and dimensions
STB 976-94 Meat mincers. Types. Main parameters and dimensions

British Standards Institution (BSI)

BS ISO 6986:2013 Side and face milling (slotting) cutters with indexable inserts. Dimensions
BS ISO 17572-3:2015 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-3:2009 Intelligent transport systems (ITS). Location referencing for geographic databases. Dynamic location references (dynamic profile)
BS ISO 17572-3:2008 Intelligent transport systems ITS) - Location referencing for geographic databases - Dynamic location references (dynamic profile)

Aerospace Industries Association

AIA NASM28728/5-2001 Dial, Control, Multiturn Counters, Three Digits FSC 5355

ANSI - American National Standards Institute

INCITS/ISO 6986:1983 Side and Face Milling (Slotting) Cutters with Indexable Inserts - Dimensions

German Institute for Standardization

DIN 1341:1986 Heat transfer; concepts, dimensionless parameters
DIN 28402:1976 Vacuum technology; quantities, symbols, units, summary
DIN 4108-1:1981 Thermal insulation in buildings; quantities and units
DIN EN IEC 60152:2023-04 Designation of phase differences by hour numbers in three-phase AC systems (IEC 60152:2021); German version EN IEC 60152:2021
DIN 863-2:1999-04 Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM28728/6-2001 Dial, Control, Multiturn Counters, Three Digit, Illuminated and Nonilluminated
AIA/NAS NASM28728/5-2001 Dial, Control, Multiturn Counters, Three Digits
AIA/NAS NASM28728/5-2014 DIAL, CONTROL, MULTITURN COUNTERS, THREE-DIGITS (Rev 2)

American National Standards Institute （ANSI)

ANSI X9.65-2004 Triple Data Encryption Algorithm (TDEA), Implementation Standard
ANSI X9.52-1998 Triple Data Encryption Algorithm Modes of Operation

BE-NBN

NBN 811-1969 Triangular thread tap ISO in feet. Threaded Section Dimensions and Tolerances

IN-BIS

IS 1890 Pt.12-1983 Quantities, units and symbols Part 12 Dimensionless parameters
IS 8640-1977 Recommendations for dimensional parameters of industrial buildings

RO-ASRO

STAS R 12928/3-1990 Industrial robots MODULES OF EXECUTION Main parameters
STAS 10515-1988 HIGH PRESSURE SOD IUM LAMPS Dimensions and main parameters
STAS 7173-1992 Mining equipment. Hoisting. Main parameters and dimensions
STAS 1343/3-1986 Water supplies DETERMINATION OF SUPPLY WATER QUANTITIES FOR LIVE STOCK UNITS
STAS 11720-1980 Devices for the mechanization of wel ding WELDING POSITIONERS Basic parametres

American Society of Mechanical Engineers (ASME)

ASME MC 88.2-1974 Procedure for bench calibration of tank level gaging tapes and sounding rules

GOSTR

GOST 8823-2018 Goods lifts. Basic parameters and dimensions

GOST

GOST 6855-1973 Frame tenoning machines. Main parameters and dimensions

North Atlantic Treaty Organization Standards Agency

STANAG 5036-1986 PARAMETERS AND PRACTICES FOR THE USE OF THE NATO 7-BIT CODE

Defense Logistics Agency

DLA SMD-5962-99507-1999 MICROCIRCUIT, DIGITAL, CMOS, 10-BIT BUS SWITCH WITH THREE-STATE OUTPUTS AND LEVEL SHIFTING, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON

Danish Standards Foundation

DS/EN IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems

International Electrotechnical Commission (IEC)

IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems

ES-UNE

UNE-EN IEC 61300-3-7:2021 Designation of phase differences by hour numbers in three-phase AC systems (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems (Endorsed by Asociación Española de Normalización in October of 2021.)

Association Francaise de Normalisation

NF C04-451*NF EN IEC 60152:2021 Designation of phase differences by hour numbers in three-phase AC systems

Others: Three parameter water gauge