Compression deformation 45 degrees

Compression deformation 45 degrees, Total:297 items.

The international standard classification for "Compression deformation 45 degrees" includes: Rubber , Thermal and sound insulating materials , Rubber and plastics , Footwear , Plastics in general , Cellular materials , Seals, glands .

The Chinese standard classification for "Compression deformation 45 degrees" includes: Rubber products in general , Heat insulation, sound absorption, light fireproof material , Nonmetallic materials used for aviation and aerospace , Footgear , Basic standards and general methods for synthetic resin and plastic , Synthetic resin and plastic .

Group Standards of the People's Republic of China

T/QGCML 2265-2023 Pressure swing adsorption system for compressed natural gas produced by concentrating low-concentration coalbed methane
T/FSI 145-2024 Low compression set silicone rubber

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33002-2016 Thermal insulating preducts for bullding applications--Determinatlon of deformation under specified compressive load and temperature conditions
GB/T 1683-2018 Rubber,vulcanized—Determination of compression set at constant strain

Professional Standard - Aviation

HB 5235-1983 Test Method for Compression Set of O-shaped Rubber Ring
HB 5230-1983 Quality Standard for Low Compression Set Fluoro Rubber O-shaped Seal Ring Used for Aviation
HB 5229-1983 Low Compression Set Fluoro Rubber Used for Aviation

Military Standard of the People's Republic of China-General Armament Department

GJB 251-1987 Low compression permanent deformation fluororubber compound

Professional Standard - Chemical Industry

HG/T 4806-2015 HG/T 4806-2015.Rubber shoes-Test methods for outsoles- Compression set
HG/T 2876-1997 Cellular material for rubber-plastics shoes-Determination of compression set
HG/T 2876-2009 Cellular material for rubber-plastics shoes—Determination of compression set

Taiwan Provincial Standard of the People's Republic of China

CNS 3560-1985 Method of Test for Permanent Compression Set of Vulcanized Rubber
CNS 10022-1983 Method of test for permanent compression set under low temperature of vulcanized rubber (→CNS 3564)
CNS 3560-2007 Method of test for compression set of vulcanized or thermoplastic rubber at ambient, elevated or low temperatures

未注明发布机构

DIN 7795 E:2020-09 Measuring compression set of elastomers in hot water
DIN EN 2799 E:1995-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
DIN EN 2798 E:2017-10 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
DIN EN 2796 E:2017-10 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
DIN EN 2798 E:1995-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
DIN EN 2796 E:1995-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
DIN EN 2799 E:2017-10 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
DIN 7795 E:2013-03 Measuring compression set of elastomers in hot water
DIN EN 2795 E:1995-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD
DIN EN 2795 E:2017-10 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43549-2023 Footwear—Test methods for socks—Static compression set
GB/T 6669-2001 Polymeric material,cellular flexible--Determination of compression set
GB/T 6669-2008 Flexible cellular polymeric materials - Determination of compression set
GB/T 10653-2001 Polymeric materials,cellular flexible--Determintion of compression set

Professional Standard - Automobile

QC/T 709-2004 Test method of compression set for automobile weatherstrips

SCC

HOLDEN HN 0162-2013 Determination of Compression Set
HOLDEN HN 0162-2004 Determination of Compression Set
ASD-STAN PREN 2797:2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 70 IRHD
NS-EN 2798:2019 Aerospace series — Fluorocarbon rubber (FKM) — Low compressions set — Hardness 80 IRHD
ASD-STAN PREN 2799:2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 90 IRHD
NS-EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD
ASD-STAN PREN 2795:2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 50 IRHD
ASD-STAN PREN 2796:2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 60 IRHD
ASD-STAN PREN 2798:2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 80 IRHD
NS-EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
NS-EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
NS-EN 3049:1998 Aerospace series — O-rings, in fluorocarbon rubber (FKM), low compression set — Hardness 80 IRHD
DANSK DS/EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
DANSK DS/EN 2798:2019 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 80 IRHD
DANSK DS/EN 2799:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 90 IRHD
DANSK DS/EN 2796:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 60 IRHD
DANSK DS/EN 2795:2018 Aerospace series – Fluorocarbon rubber (FKM) – Low compressions set – Hardness 50 IRHD
AENOR UNE 53511:2001 Elastomers. Determination of the remaining deformation due to compression at constant deformation at ambient, high or low temperatures.
DIN EN 2796 E:2017 Draft Document - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version FprEN 2796:2017
DIN EN 2797 E:2017 Draft Document - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 70 IRHD; German and English version FprEN 2797:2017
DIN EN 2798 E:2017 Draft Document - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD; German and English version FprEN 2798:2017
DIN EN 2799 E:2017 Draft Document - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - hardness 90 IRHD; German and English version FprEN 2799:2017
DIN EN 2795 E:2017 Draft Document - Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD; German and English version FprEN 2795:2017
BS 903-A6:1969 Methods of testing vulcanized rubber.-Determination of compression set after constant strain
AS 1683.13B:1976 Methods of test for elastomers - Compression set of vulcanized rubber under constant deflection
UNE 53243-21:1979 PLASTICS. COATED FABRICS WITH PLASTICS. DETERMINATION OF COMPRESSION SET
SAE AMSR83248/1A-2015 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
UNE-EN 1605:1997 THERMAL INSULATING PRODUCTS FOR BUILDING. DETERMINATION OF DEFORMATION UNDER SPECIFIED COMPRESSIVE LOAD AND TEMPERATURE CONDITIONS.
NS-EN 1605:1996 Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions
NS-EN 1605:2013 Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions
SAE AMSR83248/2A-2015 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 2, 90 Hardness)
AENOR UNE 53578:1974 Elastomers. Determination of the remaining compression deformation under constant load.
AENOR UNE-EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
DANSK DS/EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
UNE 53578:1974 ELASTOMERS. DETERMINATION OF COMPRENSION SET UNDER CONSTANT LOAD
MIL MIL-DTL-32371/2-2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
DANSK DS/EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
BS 903-A6:1957 Methods of testing vulcanized rubber. Determination of compression set
BS 3222:1960 Low compression set butadine/acrylonitrile vulcanized rubber compounds
BS 903-A6:1963 Methods of testing vulcanized rubber. Determination of compression set
DIN 7795 E:2020 Draft Document - Measuring compression set of elastomers in hot water
07/30165834 DC BS ISO 29764. Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
SAE AMSR83248/2-2000 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 2, 90 Hardness)
12/30259121 DC BS EN 1605. Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions
SAE AMSR83248/1-2000 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
NS-EN ISO 1856:1996 Polymeric materials, cellular flexible — Determination of compression set (ISO 1856:1980)
BS EN ISO 1856:1996 Polymeric materials, cellular flexible. Determination of compression set
DIN EN 1605 E:2012 Draft Document - Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version FprEN 1605:2012

CZ-CSN

CSN 50 0420-1978 Determination of the compressibility of páper (constant deformation velocity)
CSN 62 1456-1980 Testing of vulcanized rubber. Determination of compression set under constant deflection
CSN 50 3179-1986 Pressboard for transformers
CSN 64 5442-1974 Determination of compression set of lexible cellular materials

RO-ASRO

STAS 128/2-1981 Refractory products DIFFERFNTIAL DETFRMINATION OF COMPRESSION DEFORMATION TEMPERATFRE

British Standards Institution (BSI)

BS EN 3049:1998 O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
BS EN 2795:2018 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 50 IRHD
BS EN 2798:2019 Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 80 IRHD
16/30340983 DC BS EN 2797. Aerospace series. Fluorocarbon rubber (FKM). Low compressions set. Hardness 70 IRHD
BS EN ISO 1856:2001 Flexible cellular polymeric materials - Determination of compression set
BS EN 3050:1998 O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
BS ISO 815-1:2008 Rubber, vulcanized or thermoplastic - Determination of compression set - At ambient and elevated temperatures
BS ISO 815-1:2009 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
BS ISO 815-1:2014 Rubber, vulcanized or thermoplastic. Determination of compression set. At ambient or elevated temperatures
24/30494160 DC BS EN 3049 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
BS EN ISO 1856:2018 Flexible cellular polymeric materials. Determination of compression set
BS ISO 815-1:2019 Rubber, vulcanized or thermoplastic. Determination of compression set - At ambient or elevated temperatures

GOSTR

GOST 12248.2-2020 Soils. Deformation of strength parameters by unconfined compression testing
GOST 12248.3-2020 Soils. Determination of strength and deformation parameters by triaxial compression testing
GOST 12248.10-2020 Soils. Determination of strain deformation parameters of frozen soils by compression testing
GOST 12248.4-2020 Soils. Determination of deformation parameters by compression testing

PL-PKN

PN C04253-1954 Vulcanized rubber -- Determination of compressive strain
PN P04648-1970 Pile fabrics Determination of durable deformation of the pile after compression
PN C04256-1954 Vulcanized rubber -- Determination of compressive strain
PN C04287-1966 Rubber Testing of ?he plastici?y by compre- ssion ?o ?he cons?an? deformation method by plastometer ?ype Continental

ZA-SANS

SANS 5654:1972 Determination of compression set of elastomeric material
SANS 5872:1976 Compression set of vulcanized rubbers under constant deflection
SANS 5872:2008 Compression set of vulcanized rubbers under constant deflection

RU-GOST R

GOST 13648.1-1978 Board. Method for the determination of deformation after compression
GOST 29089-1991 Polymeric material, cellular flexible. Determination of compression set
GOST 18268-2017 Flexible cellular plastics. Method for determination of specific compression set

German Institute for Standardization

DIN EN 2798:2019-08 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD; German and English version EN 2798:2019
DIN EN 2799:2018-09 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD; German and English version EN 2799:2018
DIN EN 2796:2018-11 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version EN 2796:2018
DIN EN 2795:2018-05 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD; German and English version EN 2795:2018
DIN EN 3049:1998-07 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD; German and English version EN 2798:2019
DIN EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD; German and English version EN 2795:2018
DIN EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD; German and English version EN 2796:2018
DIN EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD; German and English version EN 2799:2018
DIN 7795:2015 Measuring compression set of elastomers in hot water
DIN 7795:2021 Measuring compression set of elastomers in hot water
DIN EN ISO 1856:2008 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2000+Amd 1:2007) (includes Amendment A1:2007); English version of DIN EN ISO 1856:2008-01
DIN 7795:2021-03 Measuring compression set of elastomers in hot water
DIN EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM) low compression set - Hardness 80 IRHD; German version EN 3049:1998
DIN EN 1605:2013-05 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions; German version EN 1605:2013
DIN EN 993-9:1997 Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression; German version EN 993-9:1997
DIN EN 3050:1998-07 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification; German version EN 3050:1998
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)

ES-UNE

UNE-EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD (Endorsed by Asociación Española de Normalización in April of 2018.)
UNE-EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD (Endorsed by Asociación Española de Normalización in July of 2019.)
UNE-EN ISO 1856:2019 Flexible cellular polymeric materials - Determination of compression set (ISO 1856:2018)

Association Francaise de Normalisation

NF L17-211-2*NF EN 2796:2018 Aerospace series - Fluorocarbon rubber - Low compression set - Hardness 60 IRHD
NF L17-211*NF EN 2795:2018 Aerospace series - Fluorocarbon rubber (FPM) - Low compression set - Hardness 50 IRHD
NF L17-211-4*NF EN 2798:2019 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 80 IRHD
NF L17-215*NF EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compression set - Hardness 90 IRHD
NF EN 2798:2019 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 80 DIDC
NF EN 2796:2018 Série aérospatiale - Elastomère fluroé (FKM) - Faible déformation rémanente après compression - Dureté 60 DIDC
NF EN 2799:2018 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 90 DIDC
NF EN 3049:1998 Série aérospatiale - Joints toriques, en élastomère fluorocarbone (FKM), à faible déformation rémanente après compression - Dureté 80 DIDC
NF T56-112:1996 Polymeric materials, cellular flexible. Determination of compression set.
NF P75-209:1997 Thermal insulating products for building applications. Determination of deformation under specified compressive load and temperature conditions.
NF P75-209/A1:2006 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions.
NF EN 2795:2018 Série aérospatiale - Élastomère fluoré (FKM) - Faible déformation rémanente après compression - Dureté 50 DIDC
NF EN ISO 14129:1998 Fiber-reinforced plastic composites - Determination of the stress-strain response in plane shear, including modulus and strength, by tensile test at plus or minus 45 degrees
NF EN ISO 1856:2018 Flexible cellular polymer materials - Determination of residual deformation after compression

AENOR

UNE-EN 3049:1998 AEROSPACE SERIES. O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET. HARDNESS 80 IRHD.
UNE-EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
UNE-EN 3050:1998 AEROSPACE SERIES. O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET. TECHNICAL SPECIFICATION.
UNE-EN ISO 1856:2001 Flexible cellular polymeric materials - Determination of compression set. (ISO 1856:2000)

Lithuanian Standards Office

LST EN 3049-2001 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
LST EN 1605-2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
LST EN 1605+AC-2000 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
LST EN 1605+AC-2002/A1-2007 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
LST EN 3050-2001 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

Danish Standards Foundation

DS/EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
DS/EN ISO 1856/A1:2009 Flexible cellular polymeric materials - Determination of compression set
DS/EN ISO 1856:2001 Flexible cellular polymeric materials - Determination of compression set
DS/EN 1605:2013 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
DS/EN 3050:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification

(U.S.) Ford Automotive Standards

FORD FLTM BP 108-06-2001 COMPRESSION SET OF COOLANT HOSES
FORD FLTM EU-BP 053-07-2001 COMPRESSION SET OF FOAMED SEALING PROFILES

TR-TSE

TS 2013-1975 FLEHBLE CELLULAR MATERIALS — DETERMINATION OF COMPRESSION SET

Society of Automotive Engineers (SAE)

SAE J1638-2004 Compression Set of Hoses or Solid Discs
SAE AMS7268D-2021 Rubber: Silicone [VMQ] Non-Oil Resistant Low Compression Set, 65 - 75 Type A Hardness
SAE AMS3357E-1978 SILICONE RUBBER Lubricating Oil and Compression Set Resistant 65 - 75
SAE AMS3357A-1957 SILICONE RUBBER Lubricating Oil and Compression Set Resistant (65 - 75)
SAE AMS3357B-1960 SILICONE RUBBER Lubricating Oil and Compression Set Resistant (65 - 75)
SAE AMS3357D-1976 SILICONE RUBBER Lubricating Oil and Compression Set Resistant 65 - 75
SAE AMS3357C-1965 SILICONE RUBBER Lubricating Oil and Compression Set Resistant 65 - 75
SAE AMS3357-1956 SILICONE RUBBER Lubricating Oil and Compression Set Resistant (65-75)
SAE AMS3307C-2003 RUBBER, SILICONE (VMQ) Low Compression Set, Non-Oil-Resistant 65 - 75
SAE AMS7267B-1965 RINGS, SEALING, SILICONE RUBBER Heat Resistant, Low Compression Set 70 - 80
SAE AMS7267E-1981 RINGS, SEALING, SILICONE RUBBER Heat-Resistant, Low Compression Set 70 - 80
SAE AMS3307A-1977 SILICONE RUBBER Low Compression Set, Non-Oil-Resistant 65 - 75
SAE AMS7267C-1974 RINGS, SEALING, SILICONE RUBBER Heat-Resistant, Low Compression Set 70 - 80
SAE AMS7267D-1980 RINGS, SEALING, SILICONE RUBBER Heat-Resistant, Low Compression Set 70 - 80
SAE AMS3307D-2009 Rubber, Silicone (VMQ) Low Compression Set, Non-Oil-Resistant, 65-75
SAE AMS7268B-1989 RINGS, SEALING, SILICONE RUBBER Low Compression Set, Non-Oil Resistant 65 - 75
SAE AMS7264-1982 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AMS3357F-1986 SILICONE (VMQ) RUBBER Lubricating Oil and Compression Set Resistant 65 - 75
SAE AMS7264A-2007 RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
SAE AMS3307-1969 RUBBER, SILICONE, LOW COMPRESSION SET Non-Oil Resistant (65 - 75)
SAE AMS7268A-1982 RINGS, SEALING, SILICONE RUBBER Low Compression Set, Non-Oil Resistant 65 - 75
SAE AMS7268-1969 RINGS, SEALING, SILICONE RUBBER Low Compression Set, Non-Oil Resistant (65 - 75)
SAE AS6104B-2020 FITTING, ELBOW 45°, STANDARD AND REDUCER, 37° SPHERICAL, FLARED
SAE AMS3307E-2021 Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness
SAE AMS7267A-1962 RINGS, SEALING, SILICONE RUBBER Heat Resistant, Low Compression Set (70 - 80)
SAE AMS3356-1956 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade (55 - 65)
SAE AMS3357G-2003 RUBBER, SILICONE (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75
SAE AMS3307B-1984 SILICONE (VMQ) RUBBER Low Compression Set, Non-Oil-Resistant 65 - 75
SAE AMS7267-1960 RINGS, SEALING, SILICONE RUBBER Heat Resistant - Low Compression Set (70 - 80)
SAE AMS3356A-1965 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356B-1976 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3356C-1978 SILICONE RUBBER Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65
SAE AMS3357G-1991 Rubber, Silicone (VMQ), Lubricating Oil and Compression Set Resistant, 65-75
SAE AMS3307C-1991 Rubber, Silicone (VMQ) Low Compression Set, Non-Oil-Resistant, 65-75
SAE AMS-R-83248/1A-2015 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid and Compression Set Resistant (O-Rings, Class 1, 75 Hardness)
SAE AMS7267F-1991 RINGS, SEALING, SILICONE (VSI) RUBBER Heat-Resistant, Low Compresssion Set 70 - 80

European Committee for Standardization (CEN)

EN 2799:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 90 IRHD
EN 2796:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 60 IRHD
EN 3049:1998 Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD
EN ISO 1856:1996 Polymeric Materials, Cellular Flexible - Determination of Compression Set (ISO 1856 : 1980)
EN ISO 1856:2018 Flexible cellular polymeric materials - Determination of compression set

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2798-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 80 IRHD
PREN 2796-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 60 IRHD
PREN 2795-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 50 IRHD
PREN 2797-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 70 IRHD
PREN 2799-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 90 IRHD
PREN 2797-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 70 IRHD (Edition P 2)
PREN 2798-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 80 IRHD (Edition P 2)
PREN 2799-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 90 IRHD (Edition P 2)
PREN 2796-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 60 IRHD (Edition P 2)
PREN 2795-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 50 IRHD (Edition P 2)
PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD (Edition P 1)
PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD (Edition P 1)
PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD (Edition P 1)
PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD (Edition P 1)
PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD (Edition P 1)

CEN - European Committee for Standardization

EN 2795:2018 Aerospace series - Fluorocarbon rubber (FKM) - Low compressions set - Hardness 50 IRHD

GSO

GSO ISO 3187:2015 Refractory products -- Determination of creep in compression
OS GSO ISO 1856:2017 Flexible cellular polymeric materials - Determination of compression set
GSO ISO 1856:2017 Flexible cellular polymeric materials - Determination of compression set
OS GSO ISO 29764:2013 Thermal insulating products for building applications -- Determination of deformation under specified compressive load and temperature conditions

Defense Logistics Agency

DLA MS51842 REV D NOTICE 1-1999 ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
DLA MS51842 REV D-1987 ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]
DLA MIL-PRF-27/172 E-2011 TRANSFORMERS, AUDIO FREQUENCY, MICRO-MINIATURE

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2798-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 80 IRHD (Edition P 2)
ASD-STAN PREN 2797-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 70 IRHD (Edition P 2)
ASD-STAN PREN 2799-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 90 IRHD (Edition P 2)
ASD-STAN PREN 2795-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 50 IRHD (Edition P 2)
ASD-STAN PREN 2796-2016 Aerospace series Fluorocarbon rubber (FKM) Low compressions set Hardness 60 IRHD (Edition P 2)
ASD-STAN PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD (Edition P 1)
ASD-STAN PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD (Edition P 1)
ASD-STAN PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD (Edition P 1)
ASD-STAN PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD (Edition P 1)
ASD-STAN PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD (Edition P 1)

GOST

GOST 26518-1985 Soils. A laboratory method for determing of the strength and deformation characteristics by the triaxial compression tests

ESDU - Engineering Sciences Data Unit

STRUCT 02.01.49 A-1979 Buckling stress coefficients for flat rectangular plates tapered in thickness@ under compression.
ESDU 82008 B-1991 Elastic stresses and deflections of helical compression and tension springs of round wire.

SAE - SAE International

SAE AS4137-1992 Elbow@ 45 Degree@ Swivel@ Reduced Body@ Flareless
SAE AS6104A-2018 FITTING@ ELBOW 45°@ STANDARD AND REDUCER@ 37° SPHERICAL@ FLARED
SAE AMS-R-83248/2A-2015 Rubber@ Fluorocarbon Elastomer@ High Temperature@ Fluid and Compression Set Resistant (O-Rings@ Class 2@ 90 Hardness)
SAE AS139D-1999 Hose Assembly@ Metal - Medium Pressure@ Flareless@ Welded@ 45 Degree to 45 Degree
SAE AS5461A-2003 HOSE ASSEMBLY@ METAL - MEDIUM PRESSURE@ FLARED@ WELDED@ 45 DEGREE TO 45 DEGREE
SAE AS5461-2001 Hose Assembly@ Metal - Medium Pressure@ Flared@ Welded@ 45 Degree to 45 Degree
SAE AS139B-1996 Hose Assembly@ Metal - Medium Pressure@ Flareless@ Welded@ 45 Degrees to 45 Degrees
SAE AS139E-2001 Hose Assembly@ Metal - Medium Pressure@ Flareless@ Welded@ 45 Degrees to 45 Degrees
SAE AS139C-1998 Hose Assembly@ Metal - Medium Pressure@ Flareless@ Welded@ 45 Degrees to 45 Degrees
SAE AS1477B-1994 Hose Assembly@ Flexible@ Low Pressure@ Flareless@ Potable Water@ 45 Degrees to 45 Degrees
SAE AS1476A-1983 Hose Assembly@ Flexible@ Low Pressure@ Flareless@ Potable Water@ 45 Degrees to 45 Degrees
SAE AS1476B-1983 "HOSE ASSEMBLY@ FLEXIBLE@ LOW PRESSURE@ FLARELESS@ POTABLE WATER@ 45° TO 45°,,"
SAE AS1477B-1983 Hose Assembly@ Flexible@ Low Pressure@ Flareless@ Potable Water@ 45 Degrees to 45 Degrees (Reaffirmed Noncurrent December 2001)

European Association of Aerospace Industries

AECMA PREN 2798-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 80 IRHD Edition P 1
AECMA PREN 2797-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 70 IRHD Edition P 1
AECMA PREN 2796-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 60 IRHD Edition P 1
AECMA PREN 2798-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 80 IRHD
AECMA PREN 2796-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 60 IRHD
AECMA PREN 2797-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 70 IRHD
AECMA PREN 2795-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 50 IRHD
AECMA PREN 2799-1989 Aerospace Series Fluorocarbon - Rubber (FPM) (Low Compression Set) Hardness 90 IRHD
AECMA PREN 2799-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 90 IRHD Edition P 1
AECMA PREN 2795-1995 Aerospace Series Fluorocarbon Rubber (FPM) Low Compression Set Hardness 50 IRHD Edition P 1

American Society for Testing and Materials (ASTM)

ASTM D395-03 Standard Test Methods for Rubber Property8212;Compression Set
ASTM D395-03(2008) Standard Test Methods for Rubber Property8212;Compression Set
ASTM D395-16 Standard Test Methods for Rubber Property&x2014Compression Set
ASTM D395-01 Standard Test Methods for Rubber Property-Compression Set
ASTM D395-98 Standard Test Methods for Rubber Property-Compression Set
ASTM D395-14 Standard Test Methods for Rubber Propertymdash;Compression Set
ASTM D395-02 Standard Test Methods for Rubber Property8212;Compression Set
ASTM D395-16e1 Standard Test Methods for Rubber Property—Compression Set
ASTM D1229-03(2015) Standard Test Method for Rubber Property&x2014Compression Set at Low Temperatures

Korean Agency for Technology and Standards (KATS)

KS M 6670-2016 Testing method for low-temperature compression set of vulcanized elastomers
KS M ISO 1856:2007 Flexible cellular polymeric materials－Determination of compression set
KS M ISO 1856-2007(2017) Flexible cellular polymeric materials－Determination of compression set
KS M 6670-2016(2021) Testing method for low-temperature compression set of vulcanized elastomers
KS M 6670-2021 Testing method for low-temperature compression set of vulcanized elastomers
KS M 6670-1995 Testing method for low-Temperature compression set of vulcanized elastomers
KS M ISO 815-1:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 1:At ambient or elevated temperatures

GM Daewoo

GMKOREA EDS-T-7670-2011 Test Method for Compression Set of Cellular Material
GMKOREA EDS-T-7424-2011 Determination of Compression Set

BE-NBN

NBN T 46-002-1977 Flexible cellular materials - Determination of compression set

SE-SIS

SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set

GM Europe

GME 60250-2009 Determination of compression set of elastomers (English/German)
GME 60247-2007 Compressibility of porous elastomers under given deformation (English/German)

International Organization for Standardization (ISO)

ISO 1856:1980 Polymeric materials, cellular flexible — Determination of compression set
ISO 1856:1972 Title missing - Legacy paper document
ISO 1856:2000 Flexible cellular polymeric materials - Determination of compression set
ISO 1856:2018 Flexible cellular polymeric materials - Determination of compression set
ISO 815-1:2014 Rubber, vulcanized or thermoplastic - Determination of compression set - Part 1: At ambient or elevated temperatures
ISO 1856:2000/Amd 1:2007 Flexible cellular polymeric materials - Determination of compression set; Amendment 1
ISO/TR 2799:1978 Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load

KR-KS

KS M ISO 1856-2022 Flexible cellular polymeric materials Determination of compression set

BR-ABNT

ABNT MB-253-1972 Detection of permanent compression deformation of rubber rings of cement asbestos pipe joints

Standard Association of Australia （SAA）

AS 2282.9:1999 Methods for testing flexible cellular polyurethane - Determination of compression set

American Welding Society (AWS)

WRC 149:1970 Control of Distortion and Shrinkage in Welding

WRC - Welding Research Council

BULLETIN 149-1970 CONTROL OF DISTORTION AND SHRINKAGE IN WELDING

IT-UNI

UNI 4193-1959 Vulcanized elastic materials. Determination of unit load for predetermined compression deformation

Others: Compression set,Rubber compression set test method,Compression set at room temperature,Rubber compression deformation test,Compression Set Test,rubber compression set,Compression set at room temperature,rubber compression set,compression deformation,shoe compression deformation,Rubber compression set test,Rubber compression set test method,rubber compression deformation,Compression Set Test,compression set rubber,Rubber permanent compression deformation method,How much does the compression set test compress?,Compression deformation 45 degrees,Compression Deformation Mechanics