When measuring UV, part of the curve is below 0?

When measuring UV, part of the curve is below 0?, Total:103 items.

The international standard classification for "When measuring UV, part of the curve is below 0?" includes: Power transmission and distribution lines , Insulating oils .

The Chinese standard classification for "When measuring UV, part of the curve is below 0?" includes: Power plant and electric power system operating maintenance .

Professional Standard - Post and Telecommunication

YD/T 2160.2-2010 Coaxial cables with insulation diameter below 1mm and cable assemblies - Part 2: Assemblies
YD/T 2160.1-2010 Coaxial cables with insulation diameter below 1mm and cable assemblies - Part 1: Cables

未注明发布机构

DIN EN ISO 10619-1 E:2017-10 Measurement of flexibility and stiffness of rubber and plastic hoses and pipes Part 1: Bend test at ambient temperature (draft)
DIN 19294-3 E:2019-04 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
DIN 19294-1 E:2019-04 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
DIN EN ISO 16474-3 E:2012-02 Methods for exposing paints and varnishes to laboratory light source conditions Part 3: Ultraviolet fluorescent lamps (draft)
DIN EN ISO 16474-3 E:2019-10 Methods for exposing paints and varnishes to laboratory light source conditions Part 3: Ultraviolet fluorescent lamps (draft)

Professional Standard - Geology

DZ/T 0064.59-2021 Methods for analysis of groundwater quality- Part 59: Determination of nitrate- Ultraviolet spectrophotometry

Military Standard of the People's Republic of China-General Armament Department

GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve
GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37141.2-2018 Guide to UV imaging detection of electrical equipments in high altitude regions—Part 2:Transmission lines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 37141.1-2022 Guide to UV imaging detection of electrical equipments in high altitude regions—Part 1: Substations

Association Francaise de Normalisation

NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.
NF T30-089-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps
NF EN 14187-8:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 8 : détermination du vieillissement artificiel par rayonnement UV
NF EN 13523-10:2017 Pre-painted sheets - Test methods - Part 10: resistance to fluorescent UV radiation and water condensation
NF C31-888-24*NF EN IEC 61788-24:2018 Superconductivity - Part 24 : critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
NF X90-008-1*NF EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: ultraviolet radiation emitted by artificial sources in the workplace.
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF C96-013-6-19*NF EN 60191-6-19:2010 Mechanical standardization of semiconductor devices - Part 6-19 : measurement methods of package warpage at elevated temperature and the maximum permissible warpage

German Institute for Standardization

DIN EN 16344:2013-11 Cosmetics - Analysis of cosmetic products - Screening for UV-filters in cosmetic products and quantitative determination of 10 UV-filters by HPLC; German version EN 16344:2013
DIN 53840-1:1983 Testing of textiles; determination of parameters for the crimp of textured filament yarns; filament yarns with a linear density of up to 500 dtex
DIN V EN 2155-4:1986 Aerospace series, test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm
DIN 19294-1:2020 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
DIN 19294-1:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
DIN EN 14255-3:2008 Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun; English version of DIN EN 14255-3:2008-06
DIN 19294-3:2020 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
DIN 19294-3:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
DIN EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements; English version of DIN EN 14255-4:2007-02
DIN EN 13758-1:2007-03 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
DIN EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace; German version EN 14255-1:2005
DIN VDE 0282-14:2003 Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility; German version HD 22.14 S2:2002
DIN EN 13523-10:2017-05 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
DIN EN 13523-10:2023-08 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023 / Note: Date of issue 2023-07-14*Intended as replacement for DIN EN 13523-10 (2017-05).
DIN EN 13523-10:2023 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German and English version prEN 13523-10:2023

European Committee for Standardization (CEN)

prEN 2155-4-1980 Aerospace series; test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm
EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997
EN 14255-3:2008 Measurement and assessment of personal exposures to incoherent optical radiation - Part 3: UV-Radiation emitted by the sun
CEN EN 13523-10-2001 Coil Coated Metals - Test Methods - Part 10: Resistance to Fluorescent UV Light and Water Condensation
EN ISO 10619-1:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011)
EN ISO 10619-1:2018 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017)
EN 14255-1:2005 Measurement and assessment of personal exposures to incoherent optical radiation - Part 1: Ultraviolet radiation emitted by artificial sources in the workplace

ES-AENOR

UNE 53-623 Pt.6-1989 Determination of the deformation properties of joint sealing materials between construction components after being exposed to ultraviolet irradiation under glass
UNE 53-997 Pt.6-1992 Plastics. Transparent materials in film, sheet and blade shaped. Part 6: Determination of ultra-violet light transmission

American Society for Testing and Materials (ASTM)

ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12(2024) Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

PT-IPQ

NP EN 12373-8-2001 Aluminium and aluminium alloys Anodizing Part 8:Determination of the comparative fastness to ultra-voilet light and heat of coloured anodic oxidation coatings
NP EN 60335-2-27-2000 Safety of household and similar electrical appliances Part 2:Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation(IEC 60335-2-27:1995)

International Organization for Standardization (ISO)

ISO 16474-3:2013 Paints and varnishes.Methods of exposure to laboratory light sources.Part 3: Fluorescent UV lamps
ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps
ISO 22066:2020 Water quality — Determination of total cyanide — Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection

American Society of Mechanical Engineers (ASME)

ASME STP-PT-080-2016 Development of Average Isochronous Stress-Strain Curves and Equations and External Pressure Charts and Equations for 9CR-1Mo-V Steel

SCC

06/30149463 DC IEC 60331-32. Tests for electric cables under fire conditions. Circuit integrity. Part 32. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
06/30144391 DC IEC 60331-31. Tests for electric cables under fire conditions. Circuit integrity. Part 31. Procedures and requirements for fire with shock. Cables of rated voltage up to and including 0,6/1,0 kV
09/30210529 DC BS EN ISO 12625-13. Tissue paper and tissue products. Part 13. Determination of the spectral reflectance factor (brightness) at the wavelength R 457 nm with and without UV stimulus and opacity
DIN EN 14865-1 E:2007 Draft Document - Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate ordinary-speed vehicles with speeds up to 200 km/h and high-speed vehicles with speeds up to 300 km/h; German version prEN 14865-1:2006
AENOR UNE-EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate with specimens conditions loaded in bending shear
DIN EN 4057-307 E:2002 Draft Document - Aerospace series - Cable ties for harnesses; Test methods - Part 307: Resistance to ultra violet radiation
AENOR UNE-EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
UNE-EN 13758-1:2002 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics.
DIN EN 15416-3/A1 E:2018 Draft Document - Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear; German and English version EN 15416-...
UNE-EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
DANSK DS/EN 14187-8:2017 Cold applied joint sealants – Test methods – Part 8: Determination of the artificial weathering by UV-irradiation
CEI EN IEC 61788-24:2018 Superconductivity Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
DANSK DS/EN 13523-10:2010 Coil coated metals – Test methods – Part 10: Resistance to fluorescent UV radiation and water condensation
DANSK DS/ISO 22066:2020 Water quality – Determination of total cyanide – Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
DIN EN IEC 60068-2-87 E:2024 Draft Document - Environmental Testing - Part 2-87: Tests - Test xx: UV-C Exposure of Materials and Components to Simulate Ultraviolet Germicidal Irradiation or Other Applications (IEC 104/1023/CDV:2023); German and English version prEN IEC 60068-2-87:...

European Association of Aerospace Industries

AECMA PREN 2155-4-1980 Test Methods for Transparent Materials for Aircraft Glazing - Part 4 - Determination of Ultra-Violet Radiation Transmission at 290 to 330 nm Aerospace Series Edition 1

RU-GOST R

GOST R 52161.2.27-2008 Safety of household and similar electrical appliances. Part 2.27. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0482-331-1-2019 Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0@6/1@0 kV and with an overall diameter exceeding 20 mm (IEC

ES-UNE

UNE-EN 4057-307:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation (Endorsed by AENOR in April of 2007.)
UNE-EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation

British Standards Institution (BSI)

24/30488566 DC Draft BS EN 15416-5. Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods - Part 5. Determination of minimum pressing time under referenced conditions
24/30492502 DC Draft BS EN 15416-4 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
BS 799-3:1981 Oil burning equipment - Automatic and semi-automatic atomizing burners up to 36 litres per hour
BS ISO 22066:2020 Water quality. Determination of total cyanide. Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
23/30468403 DC BS EN IEC 60068-2-87. Environmental Testing - Part 2-87. Tests-Test xx: UV-C Exposure of Materials and Components to Simulate Ultraviolet Germicidal Irradiation or Other Applications
BS 1902-4.0:1985 Methods of testing refractory materials - Properties measured under an applied stress - Introduction

Japanese Industrial Standards Committee (JISC)

JIS K 2541-6:2003 Crude oil and petroleum products -- Determination of sulfur content Part 6: Ultraviolet fluorescence method
JIS K 2541-6:2013 Crude petroleum and petroleum products.Determination of sulfur content Part 6: Ultraviolet fluorescence method

(U.S.) Ford Automotive Standards

FORD WSK-M3G178-B2-2012 TAPE, DECORATIVE, PRESSURE SENSITIVE, EXTERIOR, LOW UV, CHIP RESISTANT, VERITICAL APPLICATIONS (Below Greenhouse) ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M3G178-B1)

International Electrotechnical Commission (IEC)

IEC 61196-1-212:2021 Coaxial communication cables - Part 1-212: Environmental test methods - UV stability
IEC 60191-6-19:2010 Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of package warpage at elevated temperature and the maximum permissible warpage
IEC 60245-8:1998 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC 60377-1:1973 Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1 : General
IEC 60335-2-27:2009+AMD1:2012 CSV Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

Danish Standards Foundation

DS/IEC 61196-1-212:2021 Coaxial communication cables – Part 1-212: Environmental test methods – UV stability
DS/EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics

KR-KS

KS A ISO 8769-2-2003(2023) Baseline source for surface contamination monitor calibration - Part 2: Electron energy below 0.15 MeV and photon energy below 1.5 MeV
KS C IEC 61788-24-2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

AENOR

UNE-EN 13758-1:2002+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics

Lithuanian Standards Office

LST EN 13758-1+A1-2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires

Korean Agency for Technology and Standards (KATS)

KS C IEC 61788-24:2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
KS C IEC 60377-1:2002 Recommended methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz－Part 1：General

Others: When measuring UV, part of the curve is below 0?