Plastic Testing Testing Plastics

Plastic Testing Testing Plastics, Total:278 items.

The international standard classification for "Plastic Testing Testing Plastics" includes: Equipment for the chemical industry , Equipment for the rubber and plastics industries , Thermoplastic materials , Plastics in general , Protection against dangerous goods , Plastics .

The Chinese standard classification for "Plastic Testing Testing Plastics" includes: Non-metal chemical machinery equipment , Machinery for rubber and plastic , Basic standards and general methods for synthetic resin and plastic , Marking, packaging, transport and storage in general .

Professional Standard - Chemical Industry

HG/T 4283-2011 Test method of bending for plastics welded test specimen
HG/T 2150-1991 Testing methods for rubber and plastic calenders
HG/T 4282-2011 Test method of tensile for plastics welded test specimen
HG/T 2150-2009 Measuring method of rubber calenders & plastics calenders

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
GB/T 22236-2008 Testing of plastics—Size reduction of plastic products for test purposes
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics
GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4:Determination of moulding shrinkage
GB/T 10903-1989 Check metod of mixer for plastics
GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials

未注明发布机构

DIN 53380-2 E:2003-06 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
DIN 53455:1968 Testing of plastics; Tensile test
DIN 53733 E:2020-10 Testing of plastics - Size reduction of plastic products for test purposes
DIN 16726 E:2017-01 Plastic roofing felt and waterproofing sheet; testing
DIN 53733 E:2014-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN 16726 E:2008-02 Plastic roofing felt and waterproofing sheet; testing

Group Standards of the People's Republic of China

T/CSRA 20-2022 Determination of plastic compositions—Quantitative method of degradable plastics

CH-SNV

SNV 95825-1950 Plastic (organic plastic) material testing. Pull test
VSM 14032.3-1944 Plastic (organic plastic) material testing
SN 214 062/4-1988 Textiles — Tests for colour fastnessSection P01: Colour fastness to dry heat (excluding pressing)
SEV 4008-1965 Textiles — Tests for colour fastness Section N02: Colour fastness to bleaching: Peroxide
SNV 24624-1938 Plastic (organic plastic) material testing
SN ISO 105/X06:1984 Plastic (organic plastic) material testing
VSM 14031-1944 plastic. Material testing. Shear test (shear)
VSM 10856.2-1943 Plastic (organic plastic) material testing. Water absorbency regulations
SNV 93100-1966 Plastic (organic plastic) material testing. Complies with Vicat’s thermoplastic softening temperature regulations
SNV 742 401.6-1971 Plastic (organic plastic) material testing. Liquid-proof properties specified
SN ISO 105/Z01:1984 Textiles — Tests for colour fastnessSection X01: Colour fastness to carbonizing: Aluminium Chloride
VSM 34161.2-1972 Hardenable plastic (molded plastic) material testing. Sample production
SEV 191 d-1950 Plastic (organic plastic) material testing. Filler density requirements for molding mixes
VSM 10691-1935 Plastic (organic plastic) material testing. Determine molding mix inflation coefficient
SN 198 421-1984 Measurement of thickness of textile fabrics
SEV 1003-1959 Plastic (organic plastic) material testing. Bulk density requirements for molding mixes
VSM 34503-1937 Plastic (organic plastic) material testing. Marking index requirements and marking resistance assessment
VSM 15162-1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres)
SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test

HU-MSZT

MSZ KGST 871-1978 Plastic plasticity testing
MSZ 10192/3-1970 Plastic testing. Hard foam (plastic) tear detection
MSZ 10192/4-1970 Plastic testing. Hard foam (plastic) water content detection
MSZ 7569-1969 Plastic testing, based on plastic thermal softening point testing
MSZ 10192/5-1980 Plastic testing. Heavy plastic content
MSZ 1427/2.lap-1966 Detect plastic plastic apparent density
MSZ 10192/6-1970 Plastic testing. Deformation detection of hard foam plastics. temperature function
MSZ 1427/3.lap-1966 Compaction detection plastic plastic based calculation
MSZ 7759-1961 Plastic testing. Plastic sheet drilling capabilities
MSZ 7526-1984 Plastic stickiness detection
MSZ 7333-1959 Plastic testing, hot hardened plastic sampling and extrusion
MSZ 1425-1971 Plastic density testing
MSZ 7754-1961 Plastic testing. Sensitive temperature detection
MSZ 10092-1961 Plastic testing. Softening loss detection
MSZ 7766-1962 Plastic foil testing standards
MSZ 17744-1957 Plastic testing. Sensitive temperature detection
MSZ KGST 1199-1978 Plastic fragmentation testing
MSZ 5553/2.lap-1968 Plastic disc detection system
MSZ 10440-1962 Plastic testing. Attention! Card
MSZ 7768-1963 Electrical Insulating Plastic Foil Inspection
MSZ 10186-1972 Plastic testing. Physical inspection of common products
MSZ 7535-1984 Plastic transport box. High temperature resistance test and detection
MSZ 11682-1962 Plastic testing. Thermal expansion detection mode
MSZ 10097-1963 Review Plastic Polyester Testing
MSZ 11688-1963 Hard PVC plastic disc detection mode
MSZ 7753-1966 Plastic testing. Polyethylene quantity measurement
MSZ 7764-1970 Plastic floor leather detection method
MSZ KGST 885-1978 Plastic air conditioning and inspection areas
MSZ KGST 983-1978 General standards for physical testing of plastics
MSZ 11687-1982 Testing methods for layered plastic products
MSZ 1421-1968 Plastic testing hardness measurement ball penetration method
MSZ 11094-1965 Substance detection between plastics and textiles

BR-ABNT

ABNT MB-1424-1979 Preparation of testing samples for phenolic plastics used in casting plastics
ABNT MB-1425-1979 Preparation of testing samples for aminoplastics used in casting plastics

International Organization for Standardization (ISO)

ISO 23559:2011 Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
ISO/DIS 20753:2023 Plastics — Test specimens
ISO 172:1978 Plastics; Phenol-formaldehyde mouldings; Detection of free ammonia
ISO/FDIS 20753:2023 Plastics — Test specimens
ISO 294:1975 Plastics; Injection moulding test specimens of thermoplastic materials
ISO/FDIS 3671:2004 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 3671:2023 Plastics — Aminoplastic moulding materials — Determination of volatile matter
ISO 294-4:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage
ISO 294:1995 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 10210:2012 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics

AT-ON

ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONR CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
ONORM A 5493-1982 Packaging testing; drop test on plastic Containers

IL-SII

S.I.557-1965 TESTING OF PLASTIC MATERIALS: TENSILE TESTS

PT-IPQ

NP 706-1984 plastic material. Standard sampling in inspection testing
E 278-1973 Thermoplastic board. Crash test
E 279-1973 Thermoplastic discs, dimensional stability testing

German Institute for Standardization

DIN 16726:2017 Plastic sheets - Testing
DIN 53733:2021-04 Testing of plastics - Size reduction of plastic products for test purposes
DIN EN ISO 20753:2019-02 Plastics - Test specimens (ISO 20753:2018); German version EN ISO 20753:2018 / Note: To be replaced by DIN EN ISO 20753 (2022-07).
DIN 16726:2017-08 Plastic sheets - Testing
DIN 53736:1973 Testing of plastics; determination of the melt temperature of semicristalline plastics
DIN EN ISO 20753:2022-07 Plastics - Test specimens (ISO/DIS 20753:2022); German and English version prEN ISO 20753:2022 / Note: Date of issue 2022-06-17*Intended as replacement for DIN EN ISO 20753 (2019-02).
DIN 53465:1963 Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials
DIN CEN/TS 16010:2021-04 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN CEN/TS 16010:2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2020
DIN EN ISO 172:1998 Plastics - Phenol-formaldehyde mouldings - Detection of free ammonia (ISO 172:1978); German version EN ISO 172:1998
DIN CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version CEN/TS 16010:2013
DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN 53455:1981 Testing of plastics; Tensile test
DIN EN ISO 10210:2018-02 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012); German version EN ISO 10210:2017
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN ISO 8233:2023-02 Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023); German and English version prEN ISO 8233:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN 28233 (1991-06).
DIN EN ISO 294-4:2003 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage (ISO 294-4:2001); German version EN ISO 294-4:2003
DIN 53733:2021 Testing of plastics - Size reduction of plastic products for test purposes
DIN 53733:1976 Testing of Plastics; Size Reduction of Plastic Products for Test Purposes
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN 53380-2:2006-11 Testing of plastics - Determination of gas transmission rate - Part 2: Manometric method for testing of plastic films
DIN 53733:2015 Testing of plastics - Size reduction of plastic products for test purposes

SCC

UNE 53290:1975 PLASTICS. TEST BOTTLES
09/30206295 DC BS EN 16010. Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS 2782-2 METHOD 332A:1976 Methods of testing plastics. Stiffness of plastics film
BS 2782 INTRODUCTION:1975 Methods of testing plastics
BS 2782:1965 Methods of testing plastics
BS 2782:1970 Methods of testing plastics
SN-CEN/TS 16010:2020 Plastics — Recycled plastics — Sampling procedures for testing plastics waste and recyclates
BS EN ISO 20753:2014 Plastics. Test specimens
BS PD CEN/TS 16010:2013 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
SN-CEN/TS 16010:2013 Plastics — Recycled plastics — Sampling procedures for testing plastics waste and recyclates
DANSK DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates
DIN DVS 2201-2:1985 Testing of semi-finished products of thermoplastics:Weldability Test methods – Requirements
DIN 16726 E:2017 Draft Document - Plastic sheets - Testing
BS 2782-1 METHODS 120A TO 120E:1976 Methods of testing plastics. Thermal properties-Determination of the Vicat softening temperature of thermoplastics
DANSK DS/EN ISO 293:2005 Plastics – Compression moulding of test specimens of thermoplastic materials
AENOR UNE 53033:1955 PLASTIC MATERIALS. DETERMINATION OF ABRASION RESISTANCE OF PLASTIC MATERIALS
DIN EN 16010 E:2009 Draft Document - Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates; German version prEN 16010:2009
AENOR UNE 53018:1955 Plastic materials. Determination of humidity of molding compounds.
AS 3572.1:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 1: Preparation of glass filament reinforced plastics test specimens
AENOR UNE-EN 12814-5:2001 TESTING OF WELDED JOINTS IN THERMOPLASTICS - PART 5: MACROSCOPIC EXAMINATION.
BS EN ISO 293:2005 Plastics. Compression moulding of test specimens of thermoplastic materials
NS-EN 13067:2003 Plastics welding personnel — Qualification testing of welders — Thermoplastics welded assemblies
BS EN ISO 7792-2:2004 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials-Preparation of test specimens and determination of properties
DANSK DS/EN ISO 527-2:2012 Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics
AS 3572.16:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 16: Testing of flexible joints of glass filament reinforced plastics pipes
AENOR UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
DIN 53733 E:2020 Draft Document - Testing of plastics - Size reduction of plastic products for test purposes
BS 2782-1 METHOD 115A:1978 Methods of testing plastics. Thermal properties-Plastic yield
DANSK DS/EN ISO 3671:1998 Plastics - Aminoplastic moulding materials - Determination of volatile matter
DANSK DS/ISO 23949:2023 Plastics – Application of spread of flame test to plastic pipes
BS 2782-3 METHOD 335A:1978 Methods of testing plastics. Mechanical properties-Determination of flexural properties of rigid plastics
BS 2782-0:1992 Methods of testing plastics-Introduction
BS 2782-0:1982 Methods of testing plastics-Introduction
AENOR UNE-EN 13100-4:2013 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
DANSK DS/ISO 3915:2022 Plastics – Measurement of resistivity of conductive plastics
BS 2782-0:1995 Methods of testing plastics-Introduction
BS EN ISO 15103-2:2004 Plastics. Poly(phenylene ether) (PPE) moulding and extrusion materials-Preparation of test specimens and determination of properties
DANSK DS/EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
DANSK DS/EN ISO 3915:1999 Plastics – Measurement of resistivity of conductive plastics
AS 3572.3:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 3: Determination of loss on ignition of glass filament reinforced plastics
BS 2782-8 METHOD 824A:1984 Methods of testing plastics. Other properties-Determination of coefficients of friction of plastics film
NS-EN 13100-4:2012 Non destructive testing of welded joints of thermoplastics semifinished products — Part 4: High voltage testing

European Committee for Standardization (CEN)

PD CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 172:1998 Plastics - Phenol-Formaldehyde Mouldings - Detection of Free Ammonia ISO 172:1978
PD CEN/TS 16010:2020 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
EN ISO 10210:2017 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
EN ISO 306:1996 Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) ISO 306:1994

IT-UNI

UNI 5638-1965 Plastic material testing. Plasticizer free determination
UNI CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNI 5819-1966 Plastic material testing. Determination of tensile properties of plastic materials, replacing uni 4280
UNI 5640-1974 Plastic material testing. Compact index determination of thermoplastic materials using an extrusion plastometer

CU-NC

NC 30-36-1984 Plastics Determination of Transparent Plastic Materials Refraction Index. Testing Method
NC 30-71-1988 Plastics Industry. Determination Blocking of Plastic Films Testing Method
NC 30-63-1987 Plastics. Determination of Plasticizer Migration Testinq Method
NC 30-43-1985 Plastics. Buttons Testing Methods

Association Francaise de Normalisation

XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing waste plastics and recyclates
XP T50-809*XP CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
NF T53-035:1981 Plastics. Amorphous thermoplastic moulding materials. Determination of post-shrinkage of test specimens.
NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
NF EN 1705:1997 Plastic piping systems - Thermoplastic valves - Test method for verifying a valve after an external shock
NF T51-080:1984 PLASTICS. DETERMINATION OF THE RESISTIVITY OF CONDUCTIVE PLASTICS.
NF EN ISO 3915:2022 Plastics - Measuring the resistivity of conductive plastics
NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics

British Standards Institution (BSI)

BS EN ISO 20753:2023 Plastics. Test specimens
BS EN ISO 20753:2018 Plastics. Test specimens
22/30449570 DC Plastics. Test specimens
BS 2782-10 Method 1002:1977 Methods of testing plastics. Glass reinforced plastics. Determination of loss on ignition
BS PD CEN/TS 16010:2020 Plastics. Recycled plastics. Sampling procedures for testing plastics waste and recyclates
BS 2782-10 Method 1003:1977 Methods of testing plastics. Glass reinforced plastics. Determination of tensile properties
BS ISO 20819-2:2023 Plastics. Wood-plastic recycled composites (WPRC) - Test methods
BS EN ISO 293:2023 Plastics. Compression moulding of test specimens of thermoplastic materials
BS ISO 4433-2:1997(1999)*BS 2782-11 Method 1161B:1998 Methods of testing plastics : Part 11 : Thermoplastics pipes, fittings and valves, as Method 1161B, for association with related test methods for plastics materials and plastics piping components .
BS EN ISO 3915:2022 Plastics. Measurement of resistivity of conductive plastics
BS EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 3671:1978 Plastics - Aminoplastic moulding materials - Determination of volatile matter
BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
BS EN ISO 294-3:2020 Plastics. Injection moulding of test specimens of thermoplastic materials - Small plates
BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials

ES-UNE

UNE-CEN/TS 16010:2022 EX:2022 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE-EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
UNE-EN ISO 294-3:2021 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
UNE-EN ISO 10210:2018 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials (ISO 10210:2012)

CZ-CSN

CSN 64 0808-1988 Testing of plastics. Determination of prooessing reversion and post-revcrsion of moulding thermo- plastics
CSN 64 0244-1981 Testing of piastics. etermination migration f plasticizers
CSN 64 0201-1990 Plastics tests. Sampling
CSN 64 0626-1989 Plastics. Determination of tensile trenght of thermoplastics pipes on n annular test piece
CSN 64 0861-1979 Plastios. Determination of melt flow index of thermoplastics
CSN 64 0321-1963 Testing of polystyrene hermoplastics
CSN 64 0618-1975 Plastics testing. Method of test for fatigue of plastics
CSN 64 0213-1986 Testing of plastics. Determination of granularity
CSN 64 0526-1995 Testing of plastics. Determination of Thermal Conductivity
CSN 64 0752-1979 1'lustics. elormiuation ol iman- esoence resistance í plaslirs
CSN 64 0605-1980 Tensile test of plastics

YU-JUS

JUS G.S0.050-1984 Rubber and plastic. Standard atmosphere for conditioning and testing of rubber and plastic test peaces
JUS G.S2.813-1990 Cellular plastics. Compression test for rigid materials
JUS G.S2.638-1985 Plastics. Hole test on sheets.

SE-SIS

SIS SS 24 10 13-1982 Plastics - Film and sheeting - Determination of thickness
SIS SS 24 10 16-1980 Plastics — Film and sheeting — Determination of free shrinkage
SIS SS 24 10 20-1984 Plastics - Film and sheeting - Determination of tensile properties
SIS SS 16 12 18-1980 Plastics — Determination of flexural properties of rigid plastics
SIS SS 24 10 22-1982 Plastics - Film and sheeting - Determination of tear resistance - Trouser shaped test piece
SIS SMS 1880-1967 Plastic pipes. Pressure pipes oj unplasticized PVC. Testing
SIS 20 03 07 plastic. Test Methods. density
SIS SS-EN 28 233-1991 Thermoplastic valves — Torque — Test method
SIS SS 3643-1991 Plastics pipes — Plastic chambers for underground drainage and sewage — Requirements and testing

GOST

GOST 34739.2-2021 Plastics. Preparation of test specimens from thermoplastics. Small size tensile test specimens
GOST 12019-2021 Plastics. Preparation of test specimens from thermoplastics. General requirements

AENOR

UNE-CEN/TS 16010:2015 EX Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
UNE 53206:2012 Plastics. Large plastic bags made with plastic films. Characteristics and test methods
UNE-EN 12814-5:2001 TESTING OF WELDED JOINTS IN THERMOPLASTICS - PART 5: MACROSCOPIC EXAMINATION.
UNE 53257-1:1988 PLASTICS. SHOPPING PLASTICS BAGS FOR ALIMENTARY USE. REQUIREMENTS AND TEST METHODS
UNE 53270:2012 Plastics. Barcol hardness test.
UNE 53036:2001 Plastics. Determination of specular gloss of plastic materials.
UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS

Korean Agency for Technology and Standards (KATS)

KS M ISO 20753-2019 Plastics — Test specimens
KS C 2006-1998 Testing method for ball pressure of thermoplastics
KS C 2007-2014 Testing methods for resistance of thermosetting plastic insulating materials
KS C 2007-2004 Testing methods for thermosetting plastic insulating materials
KS C 2006-2023 Testing method for ball pressure of thermoplastics
KS M ISO 172:2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
KS M ISO 527-2-2013(2018) Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics
KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics

Lithuanian Standards Office

LST CEN/TS 16010-2021 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates

IN-BIS

IS 8543 Pt.2/Sec.3-1977 Test Methods for Plastics Part Ⅱ Material Testing Before Molding Section 3: Determination of Volume Factor of Molding Materials

Danish Standards Foundation

DS/CEN/TS 16010:2013 Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
DS/CEN/TS 16010:2020 Plastics – Recycled plastics – Sampling procedures for testing plastics waste and recyclates

FI-SFS

SFS 3151-1976 plastic pipe. Pull test
SFS 3143-1975 plastic pipe. load test
SFS 3430-1979 plastic pipe. Bend test
SFS 3146-1976 plastic pipe. Acetone test

Japanese Industrial Standards Committee (JISC)

JIS K 7145:2000 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
JIS K 7205:1995 Testing method for abrasion resistance of plastics by abrasive

TR-TSE

TS 1850-1975 PLASTICS DETERMINATION OF FLAMMABILITY OF PLASTICS ?N THE FORM OF BARS
TS 767-1969 PLASTICS DETERMINATION OF APPARENT DENSITY OF CELLULAR PLACTICS

RU-GOST R

GOST R 50491-1993 Plastics. Aminoplastic moulding materials. Determination of volatile matter
GOST 11645-1973 Plastics. Determination of flow index of thermoplastics melt by extrusion plastometer

Military Standards (MIL-STD)

DOD A-A-53718-1988 PLASTIC STRIP, DENTURE TRIAL PACK

PL-PKN

PN C89042-1992 Plastics. Testing with the torsion pendulum
PN M68201-1990 Plastic processing machines Injection moulding Testing of accuracy
PN C89418-1990 Plastics Determination of volatile matter in thermoplastics

Association of German Mechanical Engineers

DVS 2212-1-1981 Plastic Welder Test; Test Group I
DVS 2203-1-1986 Testing of welded joints of thermoplastics; test methods; requirements

GSO

BH GSO ISO 293:2015 Plastics – compression moulding of test specimens of thermoplastic materials
BH GSO ISO 10210:2016 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
GSO ISO 3915:2024 Plastics — Measurement of resistivity of conductive plastics
GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
OS GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
GSO ISO 293:2014 Plastics – compression moulding of test specimens of thermoplastic materials
GSO ISO 10210:2013 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials

WRC - Welding Research Council

BULLETIN 164-1971 PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS; PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS

CO-ICONTEC

ICONTEC 3304-1992 plastic. Brightness measurement of plastic films

Indonesia Standards

SNI 06-4595-1998 Plastics - Injections moulding test specimens of thermo plastic materials

BE-NBN

NBN T 40-101-1988 Plastics - Determination of the melt flow rate of thermoplastics

(U.S.) Ford Automotive Standards

FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS

KR-KS

KS M ISO 172-2022 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia

VN-TCVN

TCVN 4501-2-2009 Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics

ES-AENOR

UNE 53-388-1986 Plastic White Assessment Test

VDI - Verein Deutscher Ingenieure

VDI/VDE 2616 Blatt 2-2000 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-1986 Hardness testing of plastics and rubber

RO-ASRO

STAS 9595-1974 PLASTICS Determination of refractive index of transparent plastics
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics

GM North America

GM GM9068P-2003 Test for Fogging Characteristics of Plastics

International Federation of Trucks and Engines

NAVISTAR MPAPS DT-18-2014 Environmental Testing for Interior Plastic Materials

CEN - European Committee for Standardization

EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics