Carbon material preparation

Carbon material preparation, Total:282 items.

The international standard classification for "Carbon material preparation" includes: Other materials , Carbon materials , Films and sheets , Thermoplastic materials , Insulating fluids , Reinforced plastics , Semiconducting materials .

The Chinese standard classification for "Carbon material preparation" includes: Composite materials and solid fuels , Carbon material in general , Plastic profile , Basic standards and general methods for synthetic resin and plastic , Fibre reinforced composites , Hot processing technology , Compound semiconductor material .

Professional Standard - Aerospace

QJ 2781-1995 Method for Determination of Carbon, Hydrogen and Nitrogen Content in Carbon Materials
QJ 2781A-2004 Determination of the carbon content the hydrogen content and the nitrogen content of carbonaceous material
QJ 2509-1993 Test method for ash content of carbon/carbon composite materials
QJ 2691-1994 Integrated Carbon-felt / Carbon Composites Throat Liner Product

Professional Standard - Machinery

JB/T 2934-1993 Carbon materials and products for machinery
JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)

Group Standards of the People's Republic of China

T/CIET 1085-2025 Technical requirements for the production of polyols using chemical fixation of carbon dioxide using negative carbon materials
T/CACE 0147-2024 Process specification for preparing building materials from alkaline solid waste using carbon dioxide mineralization
T/CGIA 002-2018 Guidance on naming of products containing graphene materials
T/ZAMA 1001-2024 Porous carbon for silicon carban anode material
T/NAIA 0173-2022 Hard Carbon Anode Material
T/CIET 479-2024 Technical requirements for the preparation process of viscose-based carbon fiber composite graphite felt
T/JCJJ 034-2024 Methodology of carbon emission reductions from production of ready-mixed mortar with industrial by-product gypsum cementitious material
T/CIET 748-2024 Silicon-carbon composite negative electrode material
T/CEEIA 414-2019 Specification for carbon graphite bearing materials and products for canned pumps
T/CIET 1164-2025 Technical specification for carbon/carbon composite materials for aircraft brakes
T/QGCML 407-2022 Preparation technology of ultra-low ash anthracite
T/ZJATA 0017-2023 Chemical vapor deposition (CVD) epitaxy equipment for preparing silicon carbide semiconductor materials

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8718-1988 The terms of carbon materials
GB/T 44570-2024 Plastics—Polycarbonate sheets
GB/T 35513.2-2017 Plastics―Polycarbonate(PC) moulding and extrusion materials―Part 2:Preparation of test specimens and determination of properties
GB/T 30021-2013 Warp knitting carbon fiber reinforcements
GB/T 34559-2017 Test method for compressive property of C/C composites
GB/T 33501-2017 Test method for tensile property of C/C composites
GB/T 40388-2021 Test method for shear strength of C/C composites

Military Standard of the People's Republic of China-General Armament Department

GJB 9546-2018 Specification for integrally braided carbon/carbon composite products for throat linings
GJB 10027-2021 Specification for needled carbon/silicon carbide composite products for rocket engines

Professional Standard - Aviation

HB/Z 189-1991 Carbon fibre composite member holing process

Professional Standard - Building Materials

JC 425-1991 glassy carbon materials
JC/T 425-1991 glassy carbon material

Taiwan Provincial Standard of the People's Republic of China

CNS 13062-1992 Methods of Test for Prepreg of Carbon Fiber and Epoxy Resins
CNS 13629-1996 Polycarbonate Moulding Materials

Professional Standard - Non-ferrous Metal

YS/T 982-2014 Carbon/carbon U shape heating element of hydrogenation furnace
YS/T 977-2014 Carbon/carbon composites heat insulation cylinder of single crystal furnace
YS/T 792-2012 Carbon-carbon composites crucible used in single crystal furnace
YS/T 978-2014 Carbon/carbon composites guide shield of single crystal furnace

未注明发布机构

DLA A-A-59502 NOT 1-2021 Plastic sheet material (CID) Polycarbonate
UNI 5381 Heat treatment of ferrous materials. carburization

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2071-2013 Determination method of total carbon in magnesia carbonaceous refractories

German Institute for Standardization

DIN 51930:2006-04 Testing of carbonaceous materials - Preparation of extruded samples of calcined cokes - Solid materials
DIN 51925:1996-11 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51940:1992-10 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51940 E:2010-09 Draft Document - Testing of carbon materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940 E:2010 Draft Document - Testing of carbon materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51934:1990-12 Testing of carbon materials; determination of velocity of sound of shaped articles; solid materials
DIN 51075-1:1982 Testing of ceramic materials; chemical analysis of silicon carbide; sample preparation and calculation of silicon carbide content
DIN EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006); English version of DIN EN ISO 7391-2:2006-06
DIN 51941-1:2008 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51939:2004 Testing of carbon materials - Determination of floating coke content in calcined coke - Solid materials
DIN 51947:1998 Carbonaceous materials - Terms
DIN 51947:1998-04 Carbonaceous materials - Terms
DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN EN ISO/ASTM 52903-2:2021-02 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020); German version EN ISO/ASTM 52903-2:2020
DIN EN ISO 21305-2:2019-05 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019); German version EN ISO 21305-2:2019
DIN 51941-1:2008-01 Testing of carbonaceous materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN 51010-2:1987 Preparation of ceramic materials and non-shaped refractory samples
DIN EN ISO 7391-2:2006-06 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
DIN 16774-2:1988 Plastic moulding materials Polypropylene (PP) Thermoplastic moulding materials Preparation of test specimens and determination of properties
DIN EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008); English version of DIN EN ISO 21068-1:2008-12
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
DIN EN ISO 21305-2:2017 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21305-2:2017); German and English version prEN ISO 21305-2:2017
DIN EN 1482-2:2007-04 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation; German version EN 1482-2:2007 / Note: To be replaced by DIN EN ISO 14820-2 (2019-01).
DIN EN ISO /ASTM 52903-2:2021 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)
DIN EN ISO /ASTM 52903-2:2021-02 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)
DIN 51914 E:2020-05 Testing of carbonaceous materials - Determination of tensile strength - Solid materials
DIN 51914:1985 Testing of carbon materials; determination of tensile strength; solid matters
DIN EN ISO 21305-2:2017-10 Draft Document - Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 21305-2:2017); German and English version prEN ISO 21305-2:2017
DIN 7744-2:1989 Plastic molding materials Polycarbonate (PC) Thermoplastic molding materials

Association Francaise de Normalisation

NF B49-421:1990 Refractory products. Chemical analysis of aluminous, siliceous, silicon carbide, carbon and metallic silicon refractory products.
NF T51-552:1988 PLASTICS. POLYCARBONATE MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES.
FD ISO/TR 13329:2013 Nanomaterials – Preparation of Material Safety Data Sheets (MSDS)
NF T53-032-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.
NF B40-676*NF EN ISO 12676:2003 Refractory products - Determination of resistance to carbon monoxide
NF EN ISO/ASTM 52903-2:2020 Additive manufacturing - Additive manufacturing of plastic materials based on material extrusion - Part 2: process equipment
NF B49-401*NF ISO 16169:2018 Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) - Fused cast-bead method
NF E67-007-2*NF EN ISO/ASTM 52903-2:2020 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2 : process equipment
NF EN ISO 21068-1:2008 Chemical analysis of raw materials and refractory products containing silicon carbide - Part 1: general information and sample preparation
NF B49-423-1*NF EN ISO 21068-1:2008 Chemical analysis of silicon carbide- containing raw materials and refractory products - Part 1 : general information and sample preparation
NF EN ISO 7625:2012 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone
NF ISO 16169:2018 Preparation of silicon carbide and similar materials for X-ray fluorescence (XRF) analysis according to ISO 12677 - Fused bead method
NF E68-001:2014 Equipment for the manufacture of products made of composite materials - Terminology
NF ISO/DIS 8656:1987 Produits réfractaires. Matières premières et des matériaux non façonnés préparés. Échantillonnage
NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
NF T53-032-1:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1 : designation system and basis for specifications.

Ente Nazionale Italiano di Unificazione

UNI EN ISO 7391-2:2002 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
UNI EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
UNI EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
UNI EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
UNI EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
UNI 9045:1987 Elastomers. Raw materials and compounding ingredients. Carbo black. Preparation of samples for determination of dibutylphthalate absorption number (compressed sample).
UNI CEI 70180:2019 Guidance for the in-house preparation of quality control materials (QCMs)
UNI EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation

British Standards Institution (BSI)

BS EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 7391-2:2000 Plastics. Polycarbonate (PC) moulding and extrusion materials-Preparation of test specimens and determination of properties
BS EN ISO 21305-2:2019 Plastics. Polycarbonate (PC) moulding and extrusion materials. Preparation of test specimens and determination of properties
BS EN ISO/ASTM 52903-2:2020 Additive manufacturing. Material extrusion based additive manufacturing of plastic materials. Process equipment
BS EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 1: General information and sample preparation
BS PD ISO/TS 20790:2024 Oil and gas industries including lower carbon energy. Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials
BS 2W 9:1965 Specification for aircraft material. Preformed galvanized carbon steel wire rope
BS PD IEC/TS 62607-2-1:2012 Nanomanufacturing. Key control characteristics-Carbon nanotube materials. Film resistance
BS EN ISO /ASTM 52903-2:2020 Additive manufacturing. Material extrusion based additive manufacturing of plastic materials-Process equipment
PD IEC/TS 62607-2-1:2012 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Film resistance
BS 6043-1.11:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture
BS EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Sample preparation
BS 1902-8:1988 Methods of testing refractory materials-Refractories containing carbon
BS ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
BS ISO 14427:2004(2008) Production of aluminum carbonaceous materials - Cold and tepid ramming pastes, preparation of un-baked test specimens, and determination of apparent density after compaction
BS EN ISO 7625:2010 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS ISO 7625:2006 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS PD IEC TS 62607-2-4:2020 Nanomanufacturing. Key control characteristics-Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes
BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS S102:1951 Specification for aircraft material. Carbon-molybdenum steel
PD IEC TS 62607-2-4:2020 Nanomanufacturing. Key control characteristics. Carbon nanotube materials. Test methods for determination of resistance of individual carbon nanotubes
BS EN 1482-2:2024 Fertilizers, liming materials and inhibitors. Sampling and sample preparation - General sample preparation provisions
BS ISO 15917:2012 Solid ball-nosed end mills with cylindrical shanks, made of carbide and ceramic materials

European Committee for Standardization (CEN)

EN ISO 7391-2:2006 Plastics ?Polycarbonate (PC) moulding and extrusion materials ?Part 2: Preparation of test specimens and determination of properties
EN ISO 7391-2:1999 Plastics - Polycarbonate (PC) Moulding and Extrusion Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 7391-2:1996
EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008)
EN ISO/ASTM 52903-2:2020 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)

Gosstandart of Russia

GOST 30248-2013 Electrical carbon products. Electrical heating appliances made of carbon fiber materials. General specifications
GOST 30248-1997 Electrical carbon products. Electrical heating appliances made of carban fibre materials. General specifications
GOST R 57970-2017 Carbon composites. Carbon composites reinforced with carbon fiber. Classification
GOST 26564.1-1985 Silicon carbide refractory materials and products. Methods for the determination of silicon carbide
GOST 26564.2-1985 Silicon carbide refractory materials and products. Methods for the determination of free carbon
GOST R 56551-2015 Nanomanufacturing. Material specifications. Part 2-1. Materials from single-wall carbon nanotubes. Specifications forms
GOST R 58016-2017 Ceramic composites. Silicon carbide composites reinforced with silicon carbide fiber. Classification
GOST 30642-1999 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content
GOST R ISO 20202-2016 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking
GOST EN 1482-2-2013 Fertilizers and liming materials. Sampling and sample preparation. Part 2. Sample preparation.
GOST 22692-1977 Carbon materials. Method for determination of ash

Bureau of Indian Standards

IS 1985-1-1980 Recommended practice for preparation of iron and steel for electroplating Part 1 high carbon steel

International Organization for Standardization (ISO)

ISO/TS 20790:2024 Oil and gas industries including lower carbon energy — Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials
ISO 7391-2:1986 Plastics; Polycarbonate moulding and extrusion materials; Part 2 : Preparation of test specimens and determination of properties
ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 7391-2:1996 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
ISO 20202:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking
ISO 6257:1980 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Sampling
ISO 16169:2018 Preparation of silicon carbide and similar materials for analysis by ISO 12677 X-ray fluorescence (XRF) - Fused cast-bead method
ISO 21305-2:2019 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation
ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 14820-2:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation

YU-JUS

JUS B.D8.240-1982 Refractories. Chemical analysis silicon carbide production and raw materials

Association of German Mechanical Engineers

VDI 3467-2014 Emissions reduction — Production of materials from carbon and electrographite
VDI 3467-1998 Emission control - Production of carbon and electrographite materials
VDI 3467-2013 Emission control - Production of carbon and electrographite materials
VDI 3467-1995 Emission control - Production of carbon materials and artificial graphite
VDI 2020-1972 Plastic materials; preparation of material performance sheets and hints for their application

Korean Agency for Technology and Standards (KATS)

KS M ISO 7391-2:2011 Plastics-Polycarbonate(PC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 7391-2:2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 20202:2013 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of baked test pieces and determination of loss on baking
KS M ISO 7391-2-2016 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7391-2-2016(2021) Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 20202:2010 Carbonaceous materials used in the production of aluminium-Cold and tepid ramming pastes-Preparation of baked test pieces and determination of loss on baking
KS M ISO 7391-2-2021 Plastics－Polycarbonate(PC) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS L 3407-2010 High purity graphite materials
KS M 3713-2022 Preparation of carbon fibre reinforced plastic panels for test purpose
KS L 3407-1980 High purity graphite materials
KS M 3713-2012(2022) Preparation of carbon fibre reinforced plastic panels for test purpose
KS M ISO 11412:2013 Carbonaceous materials for the production of aluminium－Calcined coke－Determination of water content
KS M ISO 11412:2004 Carbonaceous materials for the production of aluminium-Calcined coke-Determination of water content
KS L ISO 21068-1:2012 Chemical analysis of silicon-carbide-containing raw materials and refractory products-Part 1:General information and sample preparation
KS M 3153-1997 POLYCARBONATE MOULDING MATERIALS
KS M ISO 20202-2010 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of baked test pieces and determination of loss on baking
KS D ISO 7625:2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625:2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625-2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
KS M 3153-1982 POLYCARBONATE MOULDING MATERIALS
KS D ISO 7625-2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS F 4708-2023 Basic magnesium carbonate heat insulating material
KS D ISO 7625:2010 Sintered metal materials, excluding hardmetals-Preparation of samples for chemical analysis for determination of carbon content
KS F 4708-1987 Basic magnesium carbonate heat insulating material
KS F 4708-2002 Basic magnesium carbonate heat insulating material

International Federation of Trucks and Engines

NAVISTAR MPAPS E06-501-2014 CARBON SCRAPER RING MATERIAL

SCC

NAVISTAR MPAPS E06-5019 CARBON SCRAPER RING MATERIAL

BE-NBN

NBN T 03-479-1984 Carbonaceous materials for the production of aluminium - Cokes for elec-trodes - Sampling
NBN T 03-478-1984 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling
NBN T 03-481-1984 Carbonaceous materials for the production of aluminium - Fitch for elec-trodes - Determination of content of quinoline-insoluble material
NBN T 03-480-1984 Carbonaceous materials for the production of aluminium - Pitch for elec-trodes - Determination of content of toluene-insoluble material
NBN T 03-488-1988 Carbonaceous materials used in the production of aluminium - Pitch for electrodes- Determination of ash
NBN T 03-483-1988 Carbonaceous materials forthe production of aluminium - Pitch for eletrodes - Determination of coking value
NBN T 03-485-1988 Carbonaceous materials used in the production of aluminium - Pitch for eletrodes- Measurement of dynamic viscosity

Japanese Industrial Standards Committee (JISC)

JIS K 6719-2:2011 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6719-2:1999 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
JIS K 6719:1994 Polycarbonate moulding materials
JIS K 7072:1991 Preparation of carbon fibre reinforced plastic panels for test purpose
JIS A 9506:1978 Basic magnesium carbonate heat insulating material

Danish Standards Foundation

DANSK DS/ISO/TS 20790:2024 Oil and gas industries including lower carbon energy – Guidelines for green manufacturing and lower carbon emission of oil and gas-field equipment and materials
DS/EN ISO 7391-2:2006 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DANSK DS/ISO/ASTM 52903-2:2020 Additive manufacturing – Material extrusion-based additive manufacturing of plastic materials – Part 2: Process equipment
DANSK DS/EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
DANSK DS/EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation
DS/EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation
DANSK DS/ISO 21305-2:2019 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DANSK DS/EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
DANSK DS/EN ISO/ASTM 52903-2:2020 Additive manufacturing – Material extrusion based additive manufacturing of plastic materials – Part 2: Process equipment (ISO/ASTM 52903-2:2020)
DANSK DS/EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
DANSK DS/EN ISO 21305-2:2019 Plastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
DS/EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
DANSK DS/ISO 14820-2:2018 Fertilizers and liming materials – Sampling and sample preparation – Part 2: Sample preparation

Society of Automotive Engineers (SAE)

SAE AS5729B-2023 O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL
SAE AS7256 O-RINGS MOLDED FROM AMS7410 FLUOROCARBON (FKM) MATERIAL
SAE AS7256-2024 O-RINGS MOLDED FROM AMS7410 FLUOROCARBON (FKM) MATERIAL
SAE AMS3670/5D Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material
SAE AS5729B O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL
SAE AMS3138-1980 COATING MATERIALS, FLUOROCARBON ELASTOMERIC
SAE AMS3138A-1985 COATING MATERIALS, FLUOROCARBON ELASTOMERIC

Standard Association of Australia （SAA）

AS 5101.2.2:2008 Methods for preparation and testing of stabilized materials - Sampling - Preparation of stabilized pavement materials
AS 5101.2.2:2008(R2017) Methods for preparation and testing of stabilized materials - Sampling - Preparation of stabilized pavement materials
AS ISO/ASTM 52903.2:2023 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials, Part 2: Process equipment
AS 1774.32:2002/Amdt 1:2003 Refractory materials and physical test methods for refractory materials Test methods for carbon-containing refractory products
AS 1774.32:2002(R2013) Refractory materials and physical test methods for refractory materials Test methods for carbon-containing refractory products
AS 1774.4.4:2001(R2013) Preparation of test pieces for physical testing of refractories and refractory materials Moldable refractories
AS 1443:1973 Bright carbon steel and carbon-manganese steel bars (metric units)

CEN - European Committee for Standardization

EN ISO 21305-2:2019 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

US-FCR

FCR AF AFI AFMC 21-130-2000 EQUIPMENT MAINTENANCE MATERIAL CONTROL

Magyar Szabványügyi Testület

MSZ 1271-1978 Mullins silicon carbide silicon carbide refractory material production types and technical requirements
MSZ 8628/1-1971 Magnetic softening materials. Steel containing trace amounts of carbon

American Society for Testing and Materials (ASTM)

ASTM B727-04(2009) Standard Practice for Preparation of Plastics Materials for Electroplating
ASTM C1783-15(2024) Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
ASTM B727-83(1995) Standard Practice for Preparation of Plastics Materials for Electroplating
ASTM B727-04(2014) Standard Practice for Preparation of Plastics Materials for Electroplating
ASTM B727-04(2020) Standard Practice for Preparation of Plastics Materials for Electroplating

RO-ASRO

STAS 2431-1985 MATERIALS FOR TYRES REPARAT,ION
SR 6058-1-1999 Ferrous materials for remelting. Carbon steels
STAS 9281/3-1973 SILICON CARBIDE REFRACTORIES DeLerniinalion of free carbon

Spanish Association for Standardization (UNE)

UNE-EN ISO 21305-2:2020 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 21305-2:2019)
UNE-EN ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 1: General information and sample preparation (ISO 21068-1:2008) (Endorsed by AENOR in October of 2008.)
UNE-EN ISO/ASTM 52903-2:2021 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)
UNE-EN ISO 7391-2:2000 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7391-2:1996)
UNE-EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
UNE 61030:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF CARBON REFRACTORIES
AENOR UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
UNE-EN 1482-2:2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation
UNE 61031:1975 REFRACTORY MATERIALS. GENERAL CHARACTERISTICS OF THE REFRACTORIES OF SILICA CARBIDE
AENOR UNE-EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) molding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11412:2013 Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of water content
OS GSO ISO 7625:2016 Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content
OS GSO ISO 21068-1:2015 Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 1: General information and sample preparation
OS GSO ISO 5931:2013 Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 7391-2:2016 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
BH GSO ISO 21068-1:2016 Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 1: General information and sample preparation
BH GSO ISO 7625:2017 Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content
BH GSO ISO 5931:2016 Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method
BH GSO ISO 20202:2016 Carbonaceous materials used in the production of aluminium -- Cold and tepid ramming pastes -- Preparation of baked test pieces and determination of loss on baking
BH GSO ISO 14820-2:2022 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation

GCC Standardization Organization

GSO ISO/ASTM 52903-2:2024 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment
GSO ISO 7625:2016 Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content
GSO ISO 12086-2:2014 Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
GSO ISO 10210:2013 Plastics - Methods for the preparation of samples for biodegradation testing of plastic materials
GSO ISO 7391-2:2013 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
GSO ISO 14820-2:2021 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation

International Truck and Engine Corporation (ITEC)

INTERN MPAPS K15-5003 Fluorocarbon (FKM) Seal Material

IT-UNI

UNI EN ISO/ASTM 52903-2:2021 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment
UNI 4907-1962 Elastomeric materials: testing of vulcanized materials, preparation of samples
UNI 5381-1970 Heat treatment of ferrous materials. carburization

American National Standards Institute （ANSI)

ANSI N15.8-2009 American National Standard for Methods of Nuclear Material Control; Material Control Systems - Special Nuclear Material Control and Accounting Systems for Nuclear Power Plants

Standards Norway

NS-EN ISO 7391-2:1999 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996)
NS-EN 1482-2:2007 Fertilizers and liming materials — Sampling and sample preparation — Part 2: Sample preparation
NS-EN ISO 7391-2:2006 Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
NS-EN ISO/ASTM 52903-2:2020 Additive manufacturing — Material extrusion based additive manufacturing of plastic materials — Part 2: Process equipment (ISO/ASTM 52903-2:2020)

Swedish Institute for Standards

SS-EN ISO 7391-2:1999 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996)
SS-EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
SS-EN ISO/ASTM 52903-2:2020 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)

Lithuanian Standards Office

LST EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
LST EN ISO/ASTM 52903-2:2021 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)
LST EN 1482-2-2007 Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation

Indonesia Standards

SNI 07-3033-1992 Carbon steel blooms and billets for forgings

VN-TCVN

TCVN 6453-2008 Carbon composite implants

National Electrical Manufacturers Association（NEMA)

NEMA CB-3:1990 Guidelines for Preparation of Material Safety Data Sheets for Carbon and Graphite Products

Military Standards (MIL-STD)

MIL MIL-DTL-24583C-2019 PACKING MATERIAL, GRAPHITIC OR CARBON BRAIDED YARN

AT-ON

OENORM EN ISO/ASTM 52903-2:2021 Additive manufacturing - Material extrusion based additive manufacturing of plastic materials - Part 2: Process equipment (ISO/ASTM 52903-2:2020)

GM Europe

GME QK 006100-1984 Filled polycarbonate material German

GM North America

GM GM181M-1988 Spring Materials Carbon Steel Spring Strip