Dimensional Statistical Analysis

Dimensional Statistical Analysis, Total:146 items.

The international standard classification for "Dimensional Statistical Analysis" includes: Limits and fits , Chain drives and their components , Integrated circuits. Microelectronics .

The Chinese standard classification for "Dimensional Statistical Analysis" includes: Basic standards and general methods , Acoustic Measurement , Semiconductor integrated circuit .

Professional Standard - Machinery

JB/T 9184-1999 Statistical dimension tolerances

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 20-1991 Dimension chain calculation book
GJB/Z 11-1990 Dimension chain calculation guidelines

National Metrological Verification Regulations of the People's Republic of China

JJG 778-2005 Noise Level Statistical Analyzers
JJG 778-2019 Noise Level Statistical Analyzers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5847-1986 Dimensional chain--Methods of calculation
GB/T 5847-2004 Dimensional chain--Methods of calculation
GB/T 17864-1999 CD Metrology procedures

未注明发布机构

DIN EN ISO 12215-5:2019 Small craft – Hull construction and sizing – Part 5: Monohull design pressures, design stresses, sizing determination
DIN EN ISO 11855-3 E:2015-03 Design, Dimensioning, Installation and Control of Embedded Radiant Heating and Cooling Systems for Built Environment Design Part 3: Design and Dimensional Specifications (Draft)

Professional Standard - Electron

SJ/Z 3206.6-1989 Shapes and dimensions of graphite electrode for emision spectrum

HU-MSZT

MSZ 20164-1988 Statistical analysis of dimensional accuracy in the construction industry
MSZ KGST 227-1975 Package. Dimensional system

AENOR

UNE 32204:2012 Coke. Size analysis.
UNE 32104:1990 HARD COAL. SIZE ANALYSIS.
UNE 56918:1990 GRANULATED CORK. SIZE ANALISYS BY MECHANICAL SIEVING.

SCC

UNE 32204:1990 COKE. SIZE ANALYSIS.
AS 1038.18:1981 Coal and coke - Analysis and testing - Size analysis of coke
AWWA QTC97092 Particle Counter Size and Count Calibration System
VDI 5586 BLATT 2-2022 Tugger train systems — planning and dimensioning
AWWA WQTC71410 Intrusion Volumes Computed with Transient Analysis Supported by Transient Pressure Recordings in a Full-Scale Distribution System
NS 9415:2009 Marine fish farms - Requirements for site survey, risk analyses, design, dimensioning, production, installation and operation
DANSK DS/EN ISO 11855-3:2015 Building environment design – Design, dimensioning, installation and control of embedded radiant heating and cooling systems – Part 3: Design and dimensioning (ISO 11855-3:2012)
NS-EN ISO 11855-3:2015 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012)
BS 4114 CI:1967 Slide rule for calculation of tolerances (inch units)
DANSK DS/ISO 12215-5:2019 Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination
DANSK DS/EN ISO 12215-5/A1:2008 Small craft – Hull construction and scantlings – Part 5: Design pressures for monohulls, design stresses, scantlings determination
DANSK DS/ISO/IEC 24570:2018 Software engineering – NESMA functional size measurement method – Definitions and counting guidelines for the application of function point analysis
DANSK DS/ISO 11855-3:2021 Building environment design – Embedded radiant heating and cooling systems – Part 3: Design and dimensioning
10/30230006 DC BS EN 15415-3. Solid recovered fuels. Determination of particle size distribution . Part 3. Method by image analysis for large dimension particles

TR-TSE

TS 1726-1974 HARD COALS - S?ZE ANALYSIS

Korean Agency for Technology and Standards (KATS)

KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS H ISO 7532-2007 Instant coffee－Size analysis
KS D 0046-2014(2019) Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-1987 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2019 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2014 Methods of sampling for size analysis of ferroalloys and size determination
KS M ISO 2030:2020 Granulated cork — Size analysis by mechanical sieving
KS L 2302-2012 Shape and dimension of glass apparatus for chemical analysis
KS L 2302-1987 Shape and dimension of glass apparatus for chemical analysis
KS V ISO 12215-5-2014(2019) Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS L 2302-2022 Shape and dimension of glass apparatus for chemical analysis
KS L 2302-2017(2022) Shape and dimension of glass apparatus for chemical analysis
KS V ISO 12215-5:2014 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
KS V ISO 12215-5:2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls

Association Francaise de Normalisation

NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
NF J95-046-5*NF EN ISO 12215-5:2019 Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
NF P01-043-1*NF ISO 13612-1:2014 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 1 : design and dimensioning
NF ISO 13612-1:2014 Heating and cooling systems in buildings - System performance calculation method and system design for heat pump systems - Part 1: design and sizing

ESDU - Engineering Sciences Data Unit

ESDU 96024 A-1996 Example of statistical techniques applied to analysis of paved runway sizes (Bivariate Normal Distribution).
ESDU 99009-1999 An introduction to Statistical Energy Analysis.

GSO

GSO ISO 2325:2013 Coke - Size analysis (Nominal top size 20 mm or less)
OS GSO ISO 7532:1994 INSTANT COFFEE — SIZE ANALYSIS
BH GSO ISO 2325:2016 Coke - Size analysis (Nominal top size 20 mm or less)
GSO ISO 11855-3:2015 Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning
BH GSO ISO 11855-3:2017 Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning
OS GSO ISO 11855-3:2015 Building environment design -- Design, dimensioning, installation and control of embedded radiant heating and cooling systems -- Part 3: Design and dimensioning
BH GSO ISO 2030:2017 Granulated cork -- Size analysis by mechanical sieving
OS GSO ISO 2030:2015 Granulated cork -- Size analysis by mechanical sieving
OS GSO ISO 4150:2015 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving
GSO ISO 4150:2015 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving
GSO ISO/IEC 24570:2023 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis
BH GSO ISO 4150:2017 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving

CZ-CSN

CSN 70 4082-1973 Analytical funnels. Shape and dimensions.
CSN 44 1342-1993 Coke. Size analysis. Nominal top size greater than 10 mm.
CSN 01 0230-1987 Applied statistics. Analysis of variance
CSN 25 6162-1975 Contact-less ganges or measuring hn size of area
CSN 25 1406-1986 Micrometer heads. Fundamental dimensions
CSN 70 4082-1996 Laboratory glassware. Analytical funnels. Shape and dimension
CSN 77 1000-1990 System for packaging dimensions
CSN 25 7619-1987 Glass areometers of constant mass. Sugar areometers. Dimensions
CSN 25 1458-1986 Micrometers for tube walls. Fundamental dimensions
CSN ISO 9407:1994 Shoe size - sizing and marking. Mondopoint system

KR-KS

KS M ISO 2030-2020 Granulated cork — Size analysis by mechanical sieving
KS V ISO 12215-5-2022 Small craft — Hull construction and scantlings — Part 5: Design pressures, design stresses and scantlings determination for monohulls
KS K 0059-2019(2024) Sizing systems for hat

Danish Standards Foundation

DS/ISO 1953:1995 Hard coal - Size analysis by sieving
DS/ISO 6149:1989 Fluid power systems and components. Metric ports. Dimensions and design
DS/EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination

British Standards Institution (BSI)

BS 1016-110.2:1996 Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size 20 mm or less
BS 1016-110.1:1996 Methods for analysis and testing of coal and coke - Size analysis of coke - Nominal top size greater than 20 mm
BS EN ISO 11855-3:2015 Building environment design. Design, dimensioning, installation and control of embedded radiant heating and cooling systems. Design and dimensioning
BS PD ISO/TS 19407:2015 Footwear. Sizing. Conversion of sizing systems
20/30397448 DC BS ISO 728. Coke. Size analysis by sieving
BS ISO 4150:2011 Green coffee or raw coffee. Size analysis. Manual and machine sieving
BS 4467:1991(2012) Guide to Dimensions in designing for elderly people
BS ISO/IEC 24570:2018 Software engineering. NESMA functional size measurement method. Definitions and counting guidelines for the application of function point analysis

VN-TCVN

TCVN 4107-1985 Outside micrometers.Cavity micrometers.Basic dimensions
TCVN 4104-1985 Outside micrometers.Lane micrometers.Basic dimensions
TCVN 4551-2009 Applied statistics.Analysis of variances
TCVN 4368-1986 System for design documentation.Rules of simple dimensioning for holes
TCVN 50-1986 Countersunk head screws.Design and dimensions
TCVN 52-1986 Cheese head screws.Designs and dimensions

RO-ASRO

STAS 11061-1988 MEAT PRODUCTS Sensorial analysis and dimensions checking up
STAS 1373/3-1973 DEPTH GAUGE VERNIER CALIPERS Dimensions
STAS 9247/5-1980 GAUGES Shapes and dimensions
STAS 7639-1980 Machine-tools OIL GAUGES Dimensions

Standard Association of Australia （SAA）

AS 1038.18:1996 Coal and coke - Analysis and testing Part 18: Coke - Size analysis
AS/NZS ISO/IEC 24570:2022 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis

European Committee for Standardization (CEN)

EN ISO 11855-3:2021 Building environment design - Embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2021)
EN ISO 11855-3:2015 Building environment design - Design@ dimensioning@ installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning

German Institute for Standardization

DIN 20550:1990-07 Mine cars size small; components, main dimensions, design
DIN 66074-1:1975 Shoe sizes; fundamental characteristics of a sizing system
DIN 20570:1989-04 Mine cars; large size; dimensions, design and construction
DIN 20560:1989-07 Mine cars; middle size; dimensions, design and construction
DIN EN ISO 12215-5:2020-03 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019); German version EN ISO 12215-5:2019
DIN 2258:1986 Graphical symbols for dimensional metrology
DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)

American National Standards Institute （ANSI)

ANSI/ASME B89.7.2-2014 Dimensional Measurement Planning
ANSI/ASME B1.30-2002 Screw Threads: Standard Practice for Calculating and Rounding Dimensions

ZA-SANS

SANS 1953:1994 Hard coal - Size analysis by sieving
SANS 61672-1:2003 Electroacoustics - Sound level meters Part 1: Specifications
SANS 12215-5:2009 Small craft - Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination

American Society of Mechanical Engineers (ASME)

ASME B89.7.2-2014(R2019) Dimensional Measurement Planning

International Organization for Standardization (ISO)

ISO 11855-3:2021 Building environment design — Design, dimensioning, installation and control of embedded radiant heating and cooling systems — Part 3: Design and dimensioning
ISO 11855-3:2012 Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning
ISO 2030:1976 Cork — Granulated cork — Size analysis by mechanical sieving
ISO 9407:2019 Footwear sizing — Mondopoint system of sizing and marking
ISO 13612-1:2014 Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 1: Design and dimensioning
ISO 12215-5:2019 Small craft — Hull construction and scantlings — Part 5: Design pressures for monohulls, design stresses, scantlings determination
ISO 6149:1980 Fluid power systems and components — Metric ports — Dimensions and design

RU-GOST R

GOST R 57425-2017 Footwear. Sizing. Conversion of sizing systems
GOST 2.307-1968 Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 16840-1978 Pinned wire. Design and dimensions
GOST 21.113-1988 System of design documentation for construction. Presentation of dimensional accuracy data
GOST 2.307-2011 Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 14742-1969 Knurled handles. Design and sizes
GOST 9036-1988 Solid-rolled wheels. Design and dimensions
GOST 25122-1982 The unified system of electronic computers. Base constructions of hardware. Basic dimensions

IT-UNI

UNI 7263-1973 X-ray analysis uses rubber to seal the radioactive source. size
UNI 7860-1978 Refractory shapes. Sampling procedure for inspection by attributes of dimensions.

VDI - Verein Deutscher Ingenieure

VDI 5586 BLATT 2-2016 In-plant milk-run systems - Planning and dimensioning

WRC - Welding Research Council

BULLETIN 464-2001 GUIDELINES FOR SIZING OF VESSELS BY LIMIT ANALYSIS

IN-BIS

IS 437-1979 Dimensional analysis of coal and coke for sale

American Welding Society (AWS)

WRC 464:2001 Guidelines For Sizing Of Vessels By Limit Analysis

SE-SIS

SIS 81 70 52-1971 Hinged doors. Co-ordinating sizes
SIS SS-ISO 6149:1985 Fluid power systems and components - Metric ports - Dimensions and design

US-FCR

FCR FED H-08-4 VOL 4-E-G-6-1988 GENERATOR SIZE CALCULATION SHEET

PL-PKN

PN O79021-1989 Packages System of dimensions

AT-ON

ONORM M 7515-1985 Calculation of dimensions ofchimneys; definitions, calculation procedure

AWS - American Welding Society

FWSH-1997 Design Handbook for Calculating Fillet Weld Sizes

ES-AENOR

UNE 56-807-1986 Wood floor design and dimensions

ES-UNE

UNE-EN ISO 12215-5:2020 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2019)