The hardness tester shows e2

The hardness tester shows e2, Total:152 items.

The international standard classification for "The hardness tester shows e2" includes: Powder metallurgy , Measuring instruments , Television receivers , Metrology and measurement in general , Road equipment and installations .

The Chinese standard classification for "The hardness tester shows e2" includes: Mechanics Measurement , Special electronic technology material , Powder metallurgy material and product , Measuring tool and instrument , Broadcasting and television transmission and receiving equipment , Coal dressing , Display recording instrument , Traffic control system .

National Metrological Verification Regulations of the People's Republic of China

JJG 2025-1989 Measuring Instruments for Microhardness
JJG 260-1991 Verification Regulation of Microhardometer

未注明发布机构

FORD WSS-M2D507-B5-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, 80 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D507-B4)
FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 63 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D517-A4-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 70 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)
VDS 3546en web Pay and Display Ticket Machines: Requirements, Classification and Test Methods
FORD WSS-M2D517-A3-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 60 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)
FORD WSB-M4D871-A2-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M4D871-A1)
FORD WSB-M4D871-A4-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 85 A DUROMETER HARDNESS, INTERIOR **TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M4D871-A1)
FORD WSS-M2D517-A4-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 70 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)
FORD WSS-M2D517-A3-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 60 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D517-A2)
FORD FLTM BP 106-04-2001 ELASTOMERIC MATERIALS MOUNTING FOR MICROHARDNESS TEST
FORD WSB-M4D871-A3-2021 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 75 A DUROMETER HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M4D871-A1)

Group Standards of the People's Republic of China

T/SUCA 008.6-2022 Display System Visual Comfort Part 5-1: Maximum Brightness Requirements for Large Displays
T/SUCA 008.3-2022 Visual comfort of display systems Part 2-2: Flat panel displays - Blue light measurement method
T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method
T/CASMES 217-2023 Portable Field Microvickers hardness tester BXLB100
T/CEMIA 036-2023 High alkali concentration negative photoresist developer for semiconductor display
T/SUCA 008.7-2022 Display System Visual Comfort Part 6-1: Display Content Multimedia Presentation
T/SPEMF 0010-2020 Liquid crystal display devices of computer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31378-2015 Test method for surface hardness of flat panel display (FPD) polarizing film
GB/T 9097-2016 Sintered metal materials,excluding hardmetals―Determination of apparent hardness and mincrohardness
GB/T 43150-2023 Design and metrological characteristics of electronic digital-indicator gauges
GB/T 15609-2008 Measurement methods for the chromaticity of color displays

National Metrological Technical Specifications of the People's Republic of China

JJF 1664-2017 Calibration Specification for Temperature Indicators

Professional Standard - Coal

MT 264-1991 Determination Method for Coal Microhardness
MT/T 264-1991 Method for Determination of Microhardness of Coal

Professional Standard - Electron

SJ/T 11841.5.1-2023 Visual comfort of display systems Part 5-1: Maximum brightness requirements for large-size displays
SJ/T 11890-2023 LED display energy-saving design requirements
SJ/T 11841.6.1-2023 Display System Visual Comfort Part 6-1: Display Content Multimedia Presentations

Professional Standard - Machinery

JB/T 9266-1999 Temperature measuring range of indicating instruments and recording instruments

Professional Standard - Light Industry

QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products--Microscopic hardness tester method

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 176-2015 Design Guidelines for Airborne Electrical/Optical Displays
GJB/Z 1016-2004 Design Guidelines for Airborne Electrical/Optical Displays

Professional Standard - Public Safety Standards

GA/T 508-2014 Countdown display unit for traffic lights

U.S. Air Force

AIR FORCE MIL-G-6035 C-1970 GAGES, PRESSURE, DIAL INDICATING, OXYGEN, HIGH PRESSURE
AIR FORCE MIL-G-6035 C (1)-1971 GAGES, PRESSURE, DIAL INDICATING, OXYGEN, HIGH PRESSURE

U.S. Military Regulations and Norms

ARMY MIL-PRF-3627 G-2006 PENETROMETERS, SOIL: DIAL INDICATING AND SPRING INDICATING
ARMY A-A-52048 B-2004 THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS, POCKET TYPE
ARMY MIL-G-50962-1971 GAGE, DEPTH, DIAL INDICATING: T4191A
ARMY MIL-G-50962 NOTICE 3-1995 GAGE, DEPTH, DIAL INDICATING: T4191A

Korean Agency for Technology and Standards (KATS)

KS D 8515-2009 Metallic and related coatings－Vickers and Knoop microhardness tests
KS B 5538-1993 Micro hardness testing machines for vickers and knoop hardness
KS B 5538-2004 MICRO HARDNESS TESTING MACHINES FOR VICKERS AND KNOOP HARDNESS
KS M 3043-1985 TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS M 3043-1990(2001) TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS A ISO 9355-2:2011 Ergonomic requirements for the design of displays and control actuators － Part 2: Displays
KS B 5431-1997(2012) Watches and clocks - Accuracy indication
KS C IEC 62715-6-3-2023 Flexible display devices — Part 6-3: Mechanical test methods — Impact and hardness tests
KS R 5030-2005 Speed indication devices for automobiles
KS B 0161-1999(2009) Surface roughness－Definitions and designation
KS D ISO 4498-2013 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
KS D ISO 4498-2010 Sintered metal materials, excluding hardmetals－Determination of apparent hardness and microhardness
KS A ISO 9355-2-2011(2016) Ergonomic requirements for the design of displays and control actuators－Part 2：Displays
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)

Danish Standards Foundation

DS/ISO 4516:1983 Metallic and related coatings. Vickers and Knoop microhardness tests
DANSK DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
DS/EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

International Organization for Standardization (ISO)

ISO 4516:1980 Metallic and related coatings; Vickers and Knoop microhardness tests
ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
ISO 6441-2:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load
ISO 9355-2:1999 Ergonomic requirements for the design of displays and control actuators - Part 2: Displays
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 4498:2005 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 9355-1:1999 Ergonomic requirements for the design of displays and control actuators - Part 1: Human interactions with displays and control actuators

United States Navy

NAVY MIL-R-900 F VALID NOTICE 1-1991 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
NAVY MIL-PRF-900 F-1973 RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS
NAVY MIL-PRF-15624 F-1994 GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM)
NAVY MIL-S-15103 F-1988 SALINITY INDICATING EQUIPMENT
NAVY MIL-S-15103 F (2)-2000 SALINITY INDICATING EQUIPMENT
NAVY MIL-S-15103 F INT AMD 3-2006 SALINITY INDICATING EQUIPMENT
NAVY MIL-PRF-1149 D-1998 GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
NAVY MIL-G-23337 VALID NOTICE 1-1991 GAGES, PRESSURE, DIAL INDICATING
NAVY MIL-G-23337 NOTICE 2-1999 GAGES, PRESSURE, DIAL INDICATING
NAVY MIL-G-23337 (3)-1965 GAGES, PRESSURE, DIAL INDICATING
NAVY MIL-G-23337-1962 GAGES, PRESSURE, DIAL INDICATING
NAVY MIL-I-5416 B (1)-1968 INDICATOR, INDICATED AIRSPEED, 10-150 KNOTS
NAVY MIL-I-5416 B NOTICE 1-1996 INDICATOR, INDICATED AIRSPEED, 10-150 KNOTS
NAVY MIL-I-5416 B-1962 INDICATOR, INDICATED AIRSPEED, 10-150 KNOTS
NAVY MIL-P-6131 C VALID NOTICE 1-1991 PLUGS, DEHYDRATOR, INDICATING HUMIDITY
NAVY MIL-T-15377 F-1979 TEMPERATURE MONITOR EQUIPMENT NAVAL SHIPBOARD
NAVY MIL-T-15377 F (1)-1987 TEMPERATURE MONITOR EQUIPMENT NAVAL SHIPBOARD
NAVY MIL-P-6131 C-1984 PLUGS, DEHYDRATOR, INDICATING HUMIDITY

British Standards Institution (BSI)

BS EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
BS IEC 62715-6-3:2020 Flexible display devices - Mechanical test methods. Impact and hardness tests
BS ISO 22394:2010 Hardmetals - Knoop hardness test
BS IEC 62977-3-9:2023 Electronic displays. Evaluation of optical performance. Display sparkle contrast
BS 3693:1992 Recommendations for design of scales and indexes on analogue indicating instruments
BS ISO 4498:2005 Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
BS 3693-1:1964 Recommendations for the design of scales and indexes-Instruments of bold presentation and for rapid reading
BS EN 16186-3:2016+A1:2018 Railway applications. Driver's cab-Design of displays

GM Holden Ltd

HOLDEN HN 0165-2013 Micro Hardness Test
HOLDEN HN 0165-1978 Micro Hardness Test
HOLDEN HN 0163-1978 Determination of Indentation Hardness Durometer
HOLDEN HN 0163-2013 Determination of Indentation Hardness Durometer

Association Francaise de Normalisation

NF A91-118*NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests.
NF EN ISO 4498:2010 Sintered metallic materials, excluding hardmetals - Determination of apparent hardness and microhardness

GM North America

GM GM9054P-1988 Microhardness Testing

American Society for Testing and Materials (ASTM)

ASTM RR-D11-1029 1984 D2240-Test Method for Rubber Property—Durometer Hardness
ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM D7735-11e1 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

German Institute for Standardization

DIN 12779:1978 Laboratory glassware; laboratory thermometers, quickly indicating (distillation thermometers)
DIN 66234-6 Beiblatt 1:1984 Example of design showing workstations at a worksite
DIN EN ISO 4498:2010-11 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010); German version EN ISO 4498:2010

Aeronautical Radio Inc.

ARINC 708-6 ITEM 7.0 Separate Display Unit (DU) Design
ARINC 708A-3 ITEM 7.0 Separate Display Unit (DU) Design
ARINC 599-1 ITEM 5.0 Control/Display Unit (CDU) Design
ARINC 738-3 ITEM 7.0-2001 Control/Display Unit (CDU) Design
ARINC 702-6 ITEM 5.0 Control Display Unit (CDU) Design
ARINC 738A-1 ITEM 7.0 Control/Display Unit (CDU) Design
ARINC 738-3 ITEM 7.0 Control/Display Unit (CDU) Design
ARINC 738A-1 ITEM 7.0-2001 Control/Display Unit (CDU) Design
ARINC 704-7 ITEM 5.0 Control/Display Unit (CDU) Design
ARINC 561-11 SEC 8.0 Control/Display Unit Design
ARINC 704A ITEM 5.0 Control/Display Unit (CDU) Design

Defense Logistics Agency

DLA MS28018 REV C-1971 GAGE-PRESSURE, MANIFOLD, DIRECT INDICATING, 2 IN. SIZE, 10-75 IN. MERCURY
DLA MS28018 REV C VALID NOTICE 3-2001 GAGE-PRESSURE, MANIFOLD, DIRECT INDICATING, 2 IN. SIZE, 10-75 IN. MERCURY
DLA MS28018 REV C VALID NOTICE 4-2006 GAGE-PRESSURE, MANIFOLD, DIRECT INDICATING, 2 IN. SIZE, 10-75 IN. MERCURY

European Committee for Standardization (CEN)

EN ISO 4516:2002 Metallic and Other Inorganic Coatings - Vickers and Knoop Microhardness Tests ISO 4516:2002

Ente Nazionale Italiano di Unificazione

UNI EN ISO 4498:2007 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
UNI EN ISO 4498:2010 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness

Society of Automotive Engineers (SAE)

SAE J1757/1-2021 Standard Metrology for Vehicular Displays
SAE J1757/1-2007 Standard Metrology for Vehicular Displays
SAE J1757/1-2002 Standard Metrology for Vehicular Displays
SAE J1757-1-2021 Standard Metrology for Vehicular Displays
SAE J1757-1-2002 Standard Metrology for Vehicular Displays
SAE J1757-1-2015 Standard Metrology for Vehicular Displays
SAE J1757/1-2015 Standard Metrology for Vehicular Displays

Gosstandart of Russia

GOST R 59262-2020 Brown coals, hard coals and anthracite. Method for determination of microhardness and microbrittleness
GOST R IEC 62715-6-3-2021 Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests
GOST 21206-1975 Coalsand anthracite. Determination method for microhardness and microbrittleness
GOST R ISO 9355-2-2009 Ergonomic requirements for the design of displays and control actuators. Part 2. Displays

International Electrotechnical Commission (IEC)

IEC 62715-6-3:2020 Flexible display devices - Part 6-3: Mechanical test methods - Impact and hardness tests

GB-REG

REG NASA-LLIS-0338-1994 Lessons Learned - The Deterioration of Display Hardware Structural Components

CZ-CSN

CSN 03 8159-1989 Microhardness tests of metallic coatings

Türk Standardları Enstitüsü

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER

Swedish Institute for Standards

SS 168405:1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor

North Atlantic Treaty Organization Standards Agency

STANAG 7095-2005 FLAT PANEL TECHNOLOGY DISPLAY DESIGN CRITERIA

SE-SIS

SIS SS-ISO 4516:1986 Metallic and related coatings - Vickers and Knoop microhardness tests

Standard Association of Australia （SAA）

AS 4024.1902:2006 Safety of machinery - Displays, controls, actuators and signals - Ergonomic requirements for the design of displays and control actuators - Displays

Standards Norway

NS 9507:1985 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 9355-2:2016 Ergonomic requirements for the design of displays and control actuators -- Part 2: Displays

Bureau of Indian Standards

IS 16563-2-2017 Ergonomic Requirements for the Design of Displays and Control Actuators Part 2 Displays
IS 9258-1979 Method for vickers micro-hardness testing of metals

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)

YU-JUS

JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)

GM Europe

GME 60256-2009 Determination of Ball Pressure Hardness of Elastomers International Rubber Hardness Scale (IRHD) Microhardness Test (English/German)

Others: The hardness tester does not display,The hardness tester shows e2