Extinction test ring

Extinction test ring, Total:469 items.

The international standard classification for "Extinction test ring" includes: Piezoelectric and dielectric devices , Radiation measurements , Fiber and cables , Advanced ceramics , Optoelectronics. Laser equipment , Protection against fire in general , Water quality in general , Fibre optic communications , Animal feeding stuffs .

The Chinese standard classification for "Extinction test ring" includes: Quartz crystal and piezoelectric element , Nuclear instrument for exploration mining and technological detection , Optical communication equipment , Special ceramics , Laser device , Special electronic technology material , Fire monitoring, alarming and fire-fighting dispatching system , Analysis methods for industrial wastewater and pollutants , Livestock and poultry feed and additive , Petroleum geology exploration .

Military Standard of the People's Republic of China-General Armament Department

GJB 5250A-2021 General requirements for target and environmental optical property testing
GJB 8684.16-2015 Pyrotechnic performance test methods Part 16: Determination of laser extinction coefficient
GJB 8684.18-2015 Pyrotechnic powder performance test methods Part 18: Determination of infrared extinction coefficient
GJB 1008.3-1990 Jet fuel test method Color determination Extinction value method
GJB/J 3353-1998 Calibration procedures for extinction ratio tester

Professional Standard - Military and Civilian Products

WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder

Hebei Provincial Standard of the People's Republic of China

DB13/T 1829-2013 Environmental performance conditions and environmental test methods for solar greenhouses

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5384.16-2005 Test methods of performance for pyrotechnic composition Part 16: Determination of laser extinction coefficient
GJB 5384.18-2005 Test methods of performance for pyrotechnic composition Part 18: Determination of IR extinction coefficient

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15972.52-2008 Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature
GB/T 12085.7-1989 Optics and optical instruments--Environmental test methods--Rain
GB/T 11297.3-1989 Test method for extinction ratio of Nd:YAG laser rods
GB/T 12085.6-1989 Optics and optical instruments--Environmental test methods--Dust
GB/T 12085.12-1989 Optics and optical instruments--Environmental test methods--Contamination
GB/T 12085.9-1989 Optics and optical instruments--Environmental test methods--Solar radiation
GB/T 10263.5-1988 Basic enviromental testing procedures for radiation detectors--Effective testing of exposure to light
GB/T 8404.2-1987 Test methods for environmental properties of optical fibres--Temperature cycling
GB/T 12085.1-1989 Optics and optical instruments--Environmental test methods--Definitions extent of testing
GB/T 45762-2025 Fine ceramics—Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
GB/T 11297.3-2002 Test method for extinction ratio of Nd:YAG laser rods
GB/T 16838-2005 Envionmental test methods and severities for fire electronic products
GB/T 12085.14-1989 Optics and optical instruments--Environmental test methods--Dew,hoarfrost,ice
GB/T 11297.12-2012 Test method for extinction ratio of optical crystal
GB/T 12085.11-1989 Optics and optical instruments--Environmental test methods--Mould growth
GB/T 12085.4-1989 Optics and optical instruments--Environmental test methods--Salt mist

Professional Standard - Environmental Protection

HJ/T 399-2007 Water quality-Determination of the chemical oxygen demand-Fast digestion-Spectrophotometric method
HJ 533-2009 Air and exhaust gas - Determination of ammonia - Nessler's reagent spectrophotometry

Group Standards of the People's Republic of China

T/CEC 467-2021 Hardware-in-the-loop simulation test method for grid-connected performance of photovoltaic inverters
T/CEEIA 365-2019 Design and Evaluation Standard for School Lighting Environment
T/CPIA 0069-2024 Testing Method for Coupled Environmental Stress of Photovoltaic Modules
T/NAIA 091-2021 Determination of Mercury in Light Oil Products Microwave Digestion-Atomic Fluorescence Spectrometry

Professional Standard - Post and Telecommunication

YD/T 1339-2005 Test methods of metropolitan optical transport network WDM ring

Professional Standard - Customs

HS/T 57-2017 Determination method of olive oil extinction coefficient (K270)

Professional Standard - Agriculture

NY/T 1945-2010 Determination of selenium in feed--Microwave digestion--Atomic fluorescence spectrometry

Professional Standard - Commodity Inspection

SN/T 2638.5-2013 Determination of arsenic and mercury content in manganese ores - Microwave digestion - Atomic fluorescence spectrometry

Professional Standard - Petroleum

SY/T 6009.8-2003 Test method of samples of geochemical exploration for oil and gas Part 8: Determination of the polynuclear aromatic hydrocarbons Fluorometry

Indonesia Standards

SNI 09-3679-2002 Test methods for filters - Vehicles lighter fire engine

British Standards Institution (BSI)

BS ISO 9022-1:2016 Optics and photonics. Environmental test methods. Definitions, extent of testing
BS EN IEC 60794-1-218:2025 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Mid-span temperature cycling test for exposed optical units, Method F18
BS EN IEC 60794-1-214:2025 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
BS EN IEC 60794-1-208:2025 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Pneumatic resistance, Method F8
BS EN 61280-2-2:1999 Fibre optic communication subsystem basic test procedures. Test procedures for digital systems-Optical eye pattern, waveform, and extinction ratio
BS EN IEC 60794-1-216:2025 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Compound flow (drip), Method F16
BS EN 61280-2-2:2005 Fibre optic communication subsystem test procedures - Digital systems - Optical eye pattern, waveform and extinction ratio measurement
BS EN IEC 62892:2019 Extended thermal cycling of PV modules. Test procedure
BS EN 61280-2-2:2012(2015) Fibre optic communication subsystem test procedures Part 2 - 2 : Digital systems — Optical eye pattern, waveform and extinction ratio measurement
BS ISO 9022-2:2015 Optics and photonics. Environmental test methods. Cold, heat and humidity
BS ISO 9022-2:2015+A1:2023 Optics and photonics. Environmental test methods - Cold, heat and humidity
BS ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments
22/30466118 DC BS EN IEC 60794-1-218. Optical fibre cables - Part 1-218. Generic specification. Basic optical cable test procedures. Environmental test methods. Mid-span temperature cycling test for exposed optical units, Method F18
BS EN 1422:1997+A1:2009 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
PD IEC/TS 62782:2016 Photovoltaic (PV) modules. Cyclic (dynamic) mechanical load testing
BS EN IEC 60794-1-215:2020 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Cable external freezing test, Method F15
BS EN 1422:2014 Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods
BS 2690-115:1983(1999) Methods of testing Water used in industry — Part 115 : Cyclohexylamine : spectrophotometric method
BS EN IEC 61280-1-4:2023 Fibre optic communication subsystem test procedures. General communication subsystems. Light source encircled flux measurement method
BS EN 61280-2-2:2012 Fibre optic communication subsystem test procedures. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
BS EN IEC 60794-1-211:2021 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Sheath shrinkage, method F11
BS EN IEC 60794-1-201:2024 Optical fibre cables Part 1-201: Generic specification — Basic optical cable test procedures — Environmental test methods — Temperature cycling, method F1
BS EN IEC 61300-2-44:2024 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Flexing of the strain relief of fibre optic devices and components
BS EN 61300-3-8:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Ambient light susceptibility
BS ISO 9022-23:2023 Optics and photonics. Environmental test methods. Low pressure combined with cold, ambient temperature and dry or damp heat
BS ISO 9022-6:2015 Optics and photonics. Environmental test methods. Dust
BS ISO 9022-10:1994 Optics and optical instruments. Environmental test methods-Combined sinusoidal vibration, dry heat or cold
16/30324510 DC BS ISO 20711. Optics and photonics. Environmental requirements. Test requirements for telescopic systems
BS ISO 9022-4:2014+A1:2023 Optics and photonics. Environmental test methods - Salt mist
10/30240326 DC BS EN 61280-2-2. Fibre optic communication subsystem test procedures. Part 2-2. Digital systems. Optical eye pattern, waveform and extinction ratio measurement
BS EN 61300-3-40:1998 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector
BS ISO 9022-12:2015 Optics and photonics. Environmental test methods. Contamination
BS EN IEC 61300-2-46:2019 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Damp heat, cyclic
BS EN IEC 60068-2-30:2025 Environmental testing - Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
BS ISO 10109:2024 Optics and photonics. Guidance for the selection of environmental tests
06/30153069 DC BS IEC 61280-2-2. Fibre optic communication subsystem test procedures. Part 2-2. Digital systems. Optical eye pattern, waveform, and extinction ratio measurement
BS ISO 9022-4:2014 Optics and photonics. Environmental test methods. Salt mist
BS EN IEC 60794-1-220:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Salt spray corrosion test, method F20
BS EN 61280-2-2:2008 Fibre optic communication subsystem test procedures -Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
BS ISO 9022-12:1994 Optics and optical instruments - Environmental test methods - Contamination
BS ISO 9022-6:1994 Optics and optical instruments - Environmental test methods - Dust
BS EN IEC 60794-1-22:2018 Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods
BS EN 2591-6321:2002 Aerospace series. Elements of electrical and optical connection. Test methods - Optical elements. Damp heat, cyclic test
21/30435859 DC BS ISO 9022-3. Optics and photonics. Environmental test methods. Part 3. Mechanical stress
BS 2011-2.1DB:1981 Environmental testing. Tests-Test Db and guidance : Damp heat, cyclic (12 + 12 hour cycle)
BS ISO 9022-4:1995 Optics and optical instruments - Environmental test methods - Salt mist
BS ISO 9022-4:2002 Optics and optical instruments - Environmental test methods - Salt mist
BS ISO 9022-4:1994 Optics and optical instruments. Environmental test methods-Salt mist
BS EN IEC 60068-2-38:2021 Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS EN IEC 60794-1-209:2024 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Ageing, method F9
BS ISO 9022-1:1994 Optics and optical instruments. Environmental test methods-Definitions, extent of testing
BS EN IEC 60068-2-52:2018 Environmental testing. Tests. Test Kb: Salt mist, cyclic (sodium chloride solution)
BS ISO 10109:2014 Optics and photonics. Guidance for the selection of environmental tests
BS ISO 9022-6:1995 Optics and optical instruments - Environmental test methods - Dust
BS ISO 10109:2015 Optics and photonics. Guidance for the selection of environmental tests
BS EN IEC 60794-1-213:2024 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Microduct pressure withstand, method F13
20/30377395 DC BS ISO 9022-3 AMD1. Optics and photonics. Environmental test methods. Part 3. Mechanical stress
BS 2011-2.1Z/AD:1977 Environmental testing. Tests-Tests Z/AD. Composite temperature/humidity cyclic test
BS ISO 9022-3:2015+A1:2020 Optics and photonics. Environmental test methods - Mechanical stress
BS ISO 9022-3:2022 Optics and photonics. Environmental test methods - Mechanical stress
BS ISO 9022-12:1995 Optics and optical instruments - Environmental test methods - Contamination
BS ISO 9022-1:1995 Optics and optical instruments - Environmental test methods - Definitions, extent of testing
BS EN 60794-1-22:2012 Optical fibre cables. Generic specification. Basic optical cable test procedures. Environmental test methods
BS EN IEC 60794-1-217:2024 Optical fibre cables - Generic specification. Basic optical cable test procedures. Environmental test methods. Cable shrinkage (fibre protrusion), Method F17
BS ISO 9022-18:1994 Optics and optical instruments. Environmental test methods-Combined damp heat and low internal pressure
BS ISO 9022-2:1995 Optics and optical instruments - Environmental test methods - Cold, heat, humidity
BS ISO 9022-3:2015 Optics and photonics. Environmental test methods. Mechanical stress
BS 2011-2.1KB:1987 Environmental testing. Tests-Test Kb. Salt mist, cyclic (sodium chloride solution)
BS ISO 9022-11:1995 Optics and optical instruments. Environmental test methods. Mould growth
BS ISO 9022-11:2015 Optics and photonics. Environmental test methods. Mould growth
BS EN 60068-2-30:1999 Environmental testing. Test methods-Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
18/30374521 DC BS IEC 60794-1-215. Optical Fibre Cables. Part 1-215. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable external freezing test, Method F15
BS 2011-2.1A:1977 Environmental testing. Tests-Tests A. Cold
11/30240656 DC BS EN 60794-1-22. Optical fibre cables. Part 1-22. Generic specification. Basic optical cable test procedures. Environmental tests methods
22/30466943 DC BS EN 60794-1-214. Optical fibre cables - Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
BS 2011-2.1KA:1982 Environmental testing. Tests-Test Ka.Salt mist
BS 2011-2.1EA:1977 Environmental testing. Tests-Test Ea. Shock
BS 2011-2.1EB:1977 Environmental testing. Tests-Test Eb. Bump
BS ISO 9022-2:1994 Optics and optical instruments. Environmental test methods-Cold, heat, humidity
BS ISO 9022-11:1994 Optics and optical instruments - Environmental test methods - Mould growth
BS ISO 9022-1:2012 Optics and photonics. Environmental test methods. Definitions, extent of testing
BS ISO 9022-9:1995 Optics and optical instruments - Environmental test methods - Solar radiation
22/30435862 DC BS ISO 10109. Optics and photonics. Guidance for the selection of environmental tests
BS ISO 9022-14:2015 Optics and photonics. Environmental test methods. Dew, hoarfrost, ice
BS EN ISO 8596:1996 Visual acuity test types. Specification for Landolt ring optotype for non-clinical purposes
BS EN IEC 61300-3-55:2020 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Examinations and measurements. Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components
BS ISO 9022-9:1994 Optics and optical instruments - Environmental test methods - Solar radiation
BS 2011-2.1B:1977 Environmental testing. Tests-Tests B. Dry Heat
BS EN IEC 60068-2-11:2021 Environmental testing. Tests. Test Ka: Salt mist
BS 2011-2.1Q:1981 Environmental testing. Tests-Test Q. Sealing
BS ISO 9022-3:1998 Optics and optical instruments - Environmental test methods - Mechanical stress
BS ISO 9022-3:1995 Optics and optical instruments. Environmental test methods. Mechanical stress

Austrian Standards

ONORM F 4031-1981 Snaphook with snaphook-ring for the fire Service belt, requirements and tests.
ONORM K 2063-1988 Steam sterilizers; big sterilizers; performance testing
ONORM K 2068-1988 Steam sterilizers; small sterilizers; performance testing
ONORM F 4035-1981 Fire helmet; construction, testing devices, fest head

American National Standards Institute （ANSI)

ANSI/TIA-455-104-B-2016 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA/EIA-455-104-A-1993(2005) Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA-455-104-A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA-455-203-A-2009(2014) FOTP-203 Light Source Encircled Flux Measurement Method
ANSI/TIA-455-104A-1993 Fiber Optic Cable Cyclic Flexing Test
ANSI/TIA/EIA 455-162A-1999 Fiber Optic Cable Temperature-Humidity Cycling
ANSI N545-1975 Thermoluminescence Dosimetry: Environmental Applications, Performance, Testing

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 1629-1969 O-Ring Elongation Modulus Test Cancelled - July 1969

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 10109:2015 Optics and photonics -- Guidance for the selection of environmental tests
OS GSO ISO 9022-12:2015 Optics and photonics -- Environmental test methods -- Part 12: Contamination
OS GSO IEC 61280-2-2:2014 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
OS GSO ISO 9022-3:2014 Optics and optical instruments – Environmental test methods - Part 3: Mechanical stress
OS GSO ISO 16847:2017 Textiles -- Test method for assessing the matting appearance of napped fabrics after cleansing
OS GSO IEC 61300-2-44:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
OS GSO ISO 9022-7:2013 Optics and optical instruments – Environmental test methods - Part 7 : Resistance to drip or rain
OS GSO IEC 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability

Gosstandart of Russia

GOST R 53318-2009 Electric light garlands. Fire safety requirements. Test methods
GOST R 58646-2019 Photovoltaic modules. Cyclic (dynamic) mechanical load testing
GOST R IEC 60794-1-22-2017 Optical fibre cables. Part 1-22. Generic specification. Basic optical cable test procedures. Environmental test methods
GOST 33405-2015 Testing of chemicals of environmental hazard. Determination of the UV-VIS absorption spectral by spectrophotometric method
GOST 3521-1981 Optical glass. Method for determination of unstriae
GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)

German Institute for Standardization

DIN ISO 10109:2015-12 Optics and photonics - Guidance for the selection of environmental tests (ISO 10109:2015)
DIN ISO 9022-1:1999-05 Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing
DIN 58142:2006-02 Testing of fibre optic elements - Determination of the resistance against environmental conditions
DIN ISO 9022-4:2015-06 Optics and photonics - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2014)
DIN ISO 9022-4:1999-05 Optics and photonics - Environmental test methods - Part 4: Salt mist
DIN ISO 9022-6:2015-08 Optics and photonics - Environmental test methods - Part 6: Dust (ISO 9022-6:2015)
DIN ISO 10109 E:2024-07 Draft Document - Optics and photonics - Guidance for the selection of environmental tests (ISO 10109:2024); Text in German and English
DIN ISO 20711 E:2017-09 Optics and photonics - Environmental requirements - Test requirements for telescopic systems
DIN 58142:1993-11 Testing of fibre optic elements; determination of the resistance again environmental conditions
DIN ISO 20711:2018-01 Optics and photonics - Environmental requirements - Test requirements for telescopic systems (ISO 20711:2017)
DIN ISO 9022-3:2022-12 Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2022)
DIN ISO 9022-3 E:2015-02 Optics and photonics - Environmental test methods - Part 3: Mechanical stress
DIN ISO 10109 E:2015 Draft Document - Optics and photonics - Guidance for the selection of environmental tests (ISO/FDIS 10109:2015)
DIN ISO 9022-7:1999-05 Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain
DIN ISO 9022-2:1999-05 Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity
DIN ISO 9022-2:2015-06 Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2015)
DIN ISO 9022-1 E:2016 Draft Document - Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing (ISO/FDIS 9022-1:2016); Text in German and English
DIN EN IEC 60794-1-218 E:2024 Draft Document - Optical fibre cables - Part 1-218: Generic specification - Basic optical cable test procedures - Environmental test methods - Mid-span temperature cycling test for exposed optical units, Method F18 (IEC 86A/2370/CDV:2023); German and E...
DIN ISO 9022-7:2015-08 Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain (ISO 9022-7:2015)
DIN EN IEC 60794-1-218 E:2024-03 Draft Document - Optical fibre cables - Part 1-218: Generic specification - Basic optical cable test procedures - Environmental test methods - Mid-span temperature cycling test for exposed optical units, Method F18 (IEC 86A/2370/CDV:2023); German and E...
DIN ISO 10109 E:2015-04 Draft Document - Optics and photonics - Guidance for the selection of environmental tests (ISO/FDIS 10109:2015)
DIN EN 61280-2-2:1999 Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures for digital systems; optical eye pattern, waveform, and extinction ratio (IEC 61280-2-2:1998); German version EN 61280-2-2:1999
DIN EN 61280-2-2:2009 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2008); German version EN 61280-2-2:2008
DIN 58142:2006 Testing of fibre optic elements - Determination of the resistance against environmental conditions
DIN ISO 20711:2018 Optics and photonics - Environmental requirements - Test requirements for telescopic systems (ISO 20711:2017)
DIN EN 61300-2-44:2014-02 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2013); German version EN 61300-2-44:2013 / Note: DIN EN 61300-2-...
DIN ISO 9022-4:2003-01 Optics and optical instruments - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2002)
DIN 58142:1993 Testing of fibre optic elements; determination of the resistance again environmental conditions
DIN EN 3745-305:2003-05 Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 305: Immunity to ambient light coupling; German and English version EN 3745-305:2002
DIN ISO 9022-8:2015-08 Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, immersion (ISO 9022-8:2015)
DIN ISO 9022-3:2022 Optics and photonics - Environmental test methods - Part 3: Mechanical stress (ISO 9022-3:2022)
DIN ISO 20711 E:2017 Draft Document - Optics and photonics - Environmental requirements - Test requirements for telescopic systems (ISO 20711:2017); Text in German and English
DIN EN IEC 60794-1-22:2019 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (IEC 60794-1-22:2017); German version EN IEC 60794-1-22:2018
DIN IEC 60794-1-215 E:2019-01 Draft Document - Optical Fiber Cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 86A/1873/CD:2018); Text in German and English
DIN EN IEC 60794-1-215:2022-07 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 60794-1-215:2020); German version EN IEC 60794-1-215:2020
DIN IEC 61280-2-2 E:2003-07 Draft Document - Fibre optic communication subsystem test procedures - Digital systems - Part 2-2: Optical eye pattern, waveform, and extinction ratio measurement (IEC 86C/504/CD:2003)
DIN EN 61280-2-2 E:2011 Draft Document - Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 86C/986/CD:2010)
DIN ISO 9022-6 E:2015 Draft Document - Optics and photonics - Environmental test methods - Part 6: Dust (ISO/FDIS 9022-6:2014)
DIN EN IEC 61300-2-44:2022-11 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components (IEC 86B/4597/CD:2022); Text in German and English / Note: Date o...
DIN EN 1486:2008-04 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting; German version EN 1486:2007
DIN EN 60794-1-22 E:2016 Draft Document - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (IEC 86A/1700/CD:2015)
DIN 58947-3:1990 Sterilization; hot air sterilizers; efficiency testing
DIN 53131-3 E:2009 Draft Document - Testing of paper - Inkjet mediums - Part 3: Print image quality - optical cancellation, optical density, optical tristimulus values
DIN ISO 9022-12 E:2015 Draft Document - Optics and photonics - Environmental test methods - Part 12: Contamination (ISO/FDIS 9022-12:2014)
DIN IEC 61280-2-2 E:2003 Draft Document - Fibre optic communication subsystem test procedures - Digital systems - Part 2-2: Optical eye pattern, waveform, and extinction ratio measurement (IEC 86C/504/CD:2003)
DIN ISO 9022-6 E:2015-02 Optics and photonics - Environmental test methods - Part 6: Dust
DIN IEC /TS 62782:2017-06 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing (IEC/TS 62782:2016)
DIN EN 61280-2-2 E:2011-09 Draft Document - Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 86C/986/CD:2010)
DIN ISO 10109-6:2007-02 Optics and photonics - Environmental requirements - Part 6: Test requirements for medical optical instruments (ISO 10109-6:2005)
DIN 53131-3 E:2009-11 Draft Document - Testing of paper - Inkjet mediums - Part 3: Print image quality - optical cancellation, optical density, optical tristimulus values
DIN ISO 9022-9:2000-09 Optics and optical instruments - Environmental test methods - Part 9: Solar radiation (ISO 9022-9:1994)
DIN IEC /TS 62782:2017 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing (IEC/TS 62782:2016)
DIN EN 60794-1-22 E:2016-03 Draft Document - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (IEC 86A/1700/CD:2015)
DIN ISO 9022-4 E:2014 Draft Document - Optics and photonics - Environmental test methods - Part 4: Salt mist (ISO/FDIS 9022-4:2014)
DIN ISO 10109-7:2002-10 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems (ISO 10109-7:2001)
DIN 14927:2005-09 Belt for positioning for firemen with 2-thorn-buckle and karabiner with multifunctional eye - Requirements, testing
DIN EN IEC 60068-3-1:2024-10*VDE 0468-3-1:2024-10 Environmental testing
DIN EN 60068-3-11:2008-03*VDE 0468-3-11:2008-03 Environmental testing
DIN ISO 9022-23:2015-03 Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
DIN EN 60068-2-39:2016-09*VDE 0468-2-39:2016-09 Environmental testing
DIN EN 60068-2-75:2015-08*VDE 0468-2-75:2015-08 Environmental testing
DIN EN 60068-2-65:2015-08*VDE 0468-2-65:2015-08 Environmental testing
DIN EN IEC 60068-2-52:2019-02*VDE 0468-2-52 Berichtigung 1:2019-02 Environmental testing
DIN EN 60068-2-30:2006-06 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005 / Note: DIN EN 60068-2-30 (2000-02) remains valid alongside this standard until 2008-11-01.
DIN EN 60068-2-27:2010-02*VDE 0468-2-27:2010-02 Environmental testing
DIN EN 60068-2-69:2020-03*VDE 0468-2-69:2020-03 Environmental testing
DIN EN 60068-2-67:2020-08*VDE 0468-2-67:2020-08 Environmental testing
DIN EN IEC 60068-2-13:2022-11*VDE 0468-2-13:2022-11 Environmental testing
DIN EN IEC 60068-2-21:2022-12*VDE 0468-2-21:2022-12 Environmental testing
DIN ISO 10109:2024-12 Optics and photonics - Guidance for the selection of environmental tests (ISO 10109:2024)
DIN EN 62892 E:2018 Draft Document - Test procedure for extended thermal cycling of PV modules (IEC 82/1344/CDV:2017); German and English version prEN 62892:2017
DIN ISO 10109-7:2002 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring systems (ISO 10109-7:2001)
DIN EN 60068-2-31:2009-04*VDE 0468-2-31:2009-04 Environmental testing
DIN EN IEC 60068-3-6:2018-10*VDE 0468-3-6:2018-10 Environmental testing
DIN EN 60068-2-57:2015-10*VDE 0468-2-57:2015-10 Environmental testing
DIN EN 60068-2-53:2011-02*VDE 0468-2-53:2011-02 Environmental testing
DIN EN IEC 60068-2-38:2024-07*VDE 0468-2-38 Berichtigung 1:2024-07 Environmental testing

International Organization for Standardization (ISO)

ISO 10109:2024 Optics and photonics — Guidance for the selection of environmental tests
ISO 9022-4:2014/Amd 1:2023 Optics and photonics — Environmental test methods — Part 4: Salt mist AMENDMENT 1
ISO 9022-6:2015 Plus Redline Optics and photonics - Environmental test methods - Part 6: Dust (includes Redline Version)
ISO/DIS 10109 Optics and photonics — Guidance for the selection of environmental tests
ISO 9022-12:2015 Plus Redline Optics and photonics - Environmental test methods - Part 12: Contamination (includes Redline Version)
ISO 9022-2:2015/Amd 1:2023 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity AMENDMENT 1
ISO 10109:2014 Optics and photonics - Guidance for the selection of environmental tests
ISO 10109:2015 Optics and photonics - Guidance for the selection of environmental tests
ISO 9022-4:2014 Optics and photonics - Environmental test methods - Part 4: Salt mist
ISO 9022-3:2015 Plus Redline Optics and photonics - Environmental test methods - Part 3: Mechanical stress (includes Redline Version)
ISO 9022-14:2015 Plus Redline Optics and photonics - Environmental test methods - Part 14: Dew, hoarfrost, ice (includes Redline Version)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 10109:2017 Optics and photonics -- Guidance for the selection of environmental tests
BH GSO IEC 60794-1-22:2022 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
BH GSO IEC 62892:2022 Extended thermal cycling of PV modules - Test procedure
BH GSO ISO 20711:2022 Optics and photonics — Environmental requirements — Test requirements for telescopic systems
BH GSO IEC 61280-2-2:2016 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
BH GSO IEC TS 62782:2022 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
BH GSO ISO 9022-3:2015 Optics and optical instruments – Environmental test methods - Part 3: Mechanical stress
BH GSO ISO 9022-7:2015 Optics and optical instruments – Environmental test methods - Part 7 : Resistance to drip or rain

GCC Standardization Organization

GSO IEC 60068-2-5:2015 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
GSO IEC 60794-1-22:2021 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
GSO ISO 9022-12:2015 Optics and photonics -- Environmental test methods -- Part 12: Contamination
GSO IEC 62892:2021 Extended thermal cycling of PV modules - Test procedure
GSO ISO 9022-6:2010 Optics and optical instruments – Environmental methods - Part 6: Dust
GSO IEC 61280-2-2:2014 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
GSO IEC TS 62782:2021 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
GSO ISO 20711:2021 Optics and photonics — Environmental requirements — Test requirements for telescopic systems
GSO IEC TR 63279:2024 Derisking photovoltaic modules - Sequential and combined accelerated stress testing
GSO ISO 9022-3:2014 Optics and optical instruments – Environmental test methods - Part 3: Mechanical stress
GSO ISO 16847:2017 Textiles -- Test method for assessing the matting appearance of napped fabrics after cleansing
GSO ISO 9022-7:2013 Optics and optical instruments – Environmental test methods - Part 7 : Resistance to drip or rain
GSO ISO/TR 17252:2013 Fire tests -- Applicability of reaction to fire tests to fire modelling and fire safety engineering
GSO ISO 10109:2015 Optics and photonics -- Guidance for the selection of environmental tests
GSO ISO 9022-8:2013 Optics and optical instruments – Environmental test methods - Part 8:High pressure, low pressure, immersion
GSO IEC 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
GSO IEC 61300-3-40:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector

Korean Agency for Technology and Standards (KATS)

KS B ISO 9022-1-2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
KS B ISO 9022-1:2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
KS B ISO 9022-4:2018 Optics and photonics — Environmental test methods — Part 4: Salt mist
KS B ISO 9022-4-2018 Optics and photonics — Environmental test methods — Part 4: Salt mist
KS B ISO 10109-7-2024 Optics and optical instruments — Environmental requirements —Part 7: Test requirements for optical measuring instruments
KS B ISO 9022-3:2018 Optics and photonics — Environmental test methods — Part 3: Mechanical stress
KS B ISO 9022-3-2018 Optics and photonics — Environmental test methods — Part 3: Mechanical stress
KS B ISO 9022-2:2018 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity
KS B ISO 9022-2-2018 Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity
KS B ISO 10109-6-2022 Optics and optical instruments－Environmental requirements－Part 6：Test requirements for medical optical devices
KS B ISO 10109-7-2019 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-7:2004 Optics and optical instruments － Environmental requirements － Part 7: Test requirements for optical measuring instruments
KS P ISO 10109-2022 Optics and photonics Guidance for the selection of environmental tests
KS B ISO 10109-7-2004(2024) Optics and optical instruments — Environmental requirements —Part 7: Test requirements for optical measuring instruments
KS B ISO 10109-7-2004(2019) Optics and optical instruments － Environmental requirements － Part 7: Test requirements for optical measuring instruments
KS C IEC 61280-2-2:2022 Fibre optic communication subsystem test procedures — Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
KS C IEC 61280-2-2-2022 Fibre optic communication subsystem test procedures — Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
KS C IEC 61280-2-2-2007(2017) Fiber optic communication subsystem basic test procedures － Part 2-2: Digital systems － Optical eye pattern, waveform, and extinction ratio measurement
KS B ISO 10109-4-2006(2016) Optics and optical instruments — Environmental requirements —Part 4: Test requirements for telescopic systems
KS C IEC 60068-2-30:2020 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h + 12 h cycle)
KS B ISO 10109-8-2022 Optics and optical instruments－Environmental requirements－Part 8：Test requirements for extreme conditions of use
KS C IEC 60068-2-30-2020 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h + 12 h cycle)
KS C IEC 60068-2-30:2014 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h+12 h cycle)

Association Francaise de Normalisation

NF S10-030-1*NF ISO 9022-1:2016 Optics and photonics - Environmental test methods - Part 1 : definitions, extent of testing
NF C93-807-2-2*NF EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2 : digital systems - Optical eye pattern, waveform and extinction ratio measurement
NF EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
NF C93-850-1-22*NF EN IEC 60794-1-22:2018 Optical fibre cables - Part 1-22 : generic specification - Basic optical cable test procedures - Environmental test methods
NF S98-015*NF EN 1422:2014 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods
NF S98-015:2009 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods.
NF S98-015:1997 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods.
NF S10-030:1994 Optics. Optical instruments. Environmental test methods.
NF EN 61280-2-2:2012 Test procedures for fibronic telecommunications subsystems - Part 2-2: digital systems - Measurement of optical eye pattern, waveform and extinction rate
NF EN 61300-2-44:2016 Fiber optic interconnect devices and passive components - Fundamental testing and measurement procedures - Part 2-44: testing - Bending of strain relief of fiber optic devices
NF C93-850-1-220*NF EN IEC 60794-1-220:2022 Optical fibre cables - Part 1-220 : generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20
NF C93-902-44*NF EN 61300-2-44:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44 : tests - Flexing of the strain relief of fibre optic devices
NF C93-850-1-216*NF EN IEC 60794-1-216:2025 Optical fibre cables - Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16
NF C93-807-2-2:2005 Fibre optic communication subsystem test procedures - Part 2-2 : Digital systems - Optical eye pattern waveform, and extinction ratio measurement.
NF EN IEC 60794-1-211:2021 Optical fiber cables - Part 1-211: Generic specification - Fundamental testing procedures for optical cables - Environmental test methods - Sheath shrinkage, method F11
NF ISO 18560-1:2014 Technical ceramics - Test method for measuring the performance of semiconductor photocatalytic materials for purifying air using the test chamber method in an indoor lighting environment - Part 1: elimination...
NF EN 2591-6321:2003 Aerospace series - Electrical and optical connection elements - Test methods - Part 6321: optical elements - Damp heat, cyclic test
NF EN IEC 60794-1-215:2020 Optical fiber cables - Part 1-215: generic specification - Fundamental testing procedures for optical cables - Environmental test methods - Outdoor frost resistance test of cables, method F15
NF C57-355*NF EN 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
NF EN 62925:2017 Concentrated Photovoltaic (CPV) Modules – Thermal Cycling Testing for Determination of Thermal Fatigue Enhanced Durability
NF EN 60068-2-30:2006 Environmental tests - Part 2-30: tests - Db test: cyclic damp heat test (12 h + 12 h cycle)
NF EN 1486:2007 Protective clothing for firefighters - Test methods and requirements for reflective clothing for special fire-fighting operations
NF EN IEC 61300-2-46:2019 Interconnecting devices and passive optical fiber components - Fundamental methods of testing and measurement - Part 2-46: testing - Damp heat, cyclic testing
NF ISO 14605:2013 Technical ceramics - Light sources for testing photocatalytic semiconductor materials in an indoor lighting environment
NF C93-850-1-211*NF EN IEC 60794-1-211:2021 Optical fibre cables - Part 1-211 : generic specification - Basic optical cable test procedures - Environmental test methods - Sheath shrinkage, method F11
NF C93-807-2-2:2008 Fibre optic communication subsystem test procedures - Part 2-2 : digital systems - Optical eye pattern, waveform and extinction ratio measurement.
NF EN 3745-305:2003 Aerospace series - Optical fibers and cables for aeronautical use - Test methods - Part 305: coupling immunity to ambient light
NF EN 3745-402:2006 Aerospace Series - Optical Fibers and Cables for Aircraft Use - Test Methods - Part 402: Temperature Cycling
NF S98-004-2:1997 Biological systems for testing sterilizers and sterilization processes. Part 2 : particular systems for use in ethylene oxide sterilizers.

Polski Komitet Normalizacyjny (PKN)

PN T04560-1988 Information processing Data coding standards in RFID systems
PN N84519-1993 Photography. Expendable photoflash lamps. Determination of light output
PN C45300-09-1990 Aromatic hydrocarbons Test methods Determination of thiophene content in benzene by spectrophotometric method
PN-EN IEC 60794-1-215-2021-03 E Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 60794-1-215:2020)

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60794-1-218:2025 Optical fibre cables - Part 1-218: Generic specification - Basic optical cable test procedures - Environmental test methods - Mid-span temperature cycling test for exposed optical units, Method F18
EN IEC 60794-1-214:2025 Optical fibre cables - Part 1-214: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable UV resistance test, Method F14
EN 60794-1-22:2018 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
EN 60794-1-22:2012 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
EN IEC 60794-1-22:2018 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
EN IEC 60794-1-216:2025 Optical fibre cables - Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16
EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15
EN 61280-2-2:2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern@ waveform and extinction ratio measurement
EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
EN 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
EN 61280-2-2:1999 Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-2: Test Procedures for Digital Systems - Optical Eye Pattern@ Waveform@ and Extinction Ratio
FprEN IEC 61300-2-44:2023 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components
EN IEC 60794-1-211:2021 Optical fibre cables - Part 1-211: Generic specification - Basic optical cable test procedures - Environmental test methods - Sheath shrinkage, method F11

U.S. Military Regulations and Norms

ARMY MIL-E-12397 B-1954 ERASER, RUBBER-PUMICE (FOR TESTING COATED OPTICAL ELEMENTS)
ARMY A-A-52406 A-1998 CLAMP, LOOP, MUFFLER

International Electrotechnical Commission (IEC)

IEC 60794-1-218:2025 Optical fibre cables - Part 1-218: Generic specification - Basic optical cable test procedures - Environmental test methods - Mid-span temperature cycling test for exposed optical units, Method F18
IEC 60794-1-201:2024 Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, method F1
IEC 60794-1-216:2025 PRV Optical fibre cables - Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16
IEC 60794-1-208:2025 PRV Optical fibre cables - Part 1-208: Generic specification - Basic optical cable test procedures - Environmental test methods - Pneumatic resistance, Method F8
IEC 61280-2-2:2005 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement
IEC 62925:2016 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
IEC 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
IEC 61280-2-2:2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement
IEC 61300-2-44:2024 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices and components

Swedish Institute for Standards

SS-EN 1486:2007 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
SS-EN IEC 62892:2020 Extended thermal cycling of PV modules - Test procedure
SS-EN 61280-2-2:2013 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
SS-EN IEC 60794-1-212:2025 Optical fibre cables − Part 1-212: Generic specification − Basic optical cable test procedures − Environmental test methods − Temperature cycling with cable elements fixed at both ends, Method F12
SS-EN 60794-1-22:2012 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
SS-EN 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
SIS SMS 2217-1969 Fire hose cupboard. Testing
SIS SEN 43 16 04-1971 Environmental testing. Damp heat Test Da and Db, cyclic
SS-EN IEC 60794-1-217:2025 Optical fibre cables – Part 1-217: Generic specification – Basic optical cable test procedures – Environmental test methods – Cable shrinkage (fibre protrusion), Method F17
SIS SS-IEC 68:1991 Environmental testing
SS-EN IEC 61300-2-44:2024 Fibre optic interconnecting devices and passive components − Basic test and measurement procedures − Part 2-44: Tests − Flexing of the strain relief of fibre optic devices and components
SS-EN 15889:2011 Fire-fighting hoses - Test methods
SS-EN 60068-2-30:2006 Environmental testing - Part 2: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle)

Bureau of Indian Standards

IS 17956-2023 Extended Thermal Cycling Of Pv Modules Test Procedure
IS/IEC/TS 62782-2016 Photovoltaic ( PV ) Modules — Cyclic ( Dynamic ) Mechanical Load Testing
IS/IEC 62925-2016 Concentrator Photovoltaic ( CPV ) Modules — Thermal Cycling Test to Differentiate Increased Thermal Fatigue Durability

Spanish Association for Standardization (UNE)

UNE-EN IEC 60794-1-22:2018 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
AENOR UNE-EN 60794-1-22:2015 Optical fiber cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
UNE-EN 61280-2-2:2012/AC:2015 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (Endorsed by AENOR in June of 2015.)
UNE-EN 61280-2-2:2012 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (Endorsed by AENOR in February of 2013.)
UNE-EN IEC 62892:2020 Extended thermal cycling of PV modules - Test procedure
UNE-EN IEC 60794-1-220:2022 Optical fibre cables - Part 1-220: Generic specification - Basic optical cable test procedures - Environmental test methods - Salt spray corrosion test, method F20 (Endorsed by Asociación Española de Normalización in May of 2022.)
AENOR UNE-EN IEC 60794-1-22:2018 Optical fibre wires. Part 1-22: Generic specification. Basic test procedures for optical cables. Environmental test methods.
UNE-EN 61300-2-44:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
UNE-EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
UNE-EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (Endorsed by Asociación Española de Normalización in October of 2020.)
UNE-EN 62925:2018 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
UNE-EN 1486:1996 PROTECTIVE CLOTHING FOR FIREFIGHTERS. TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALIZED FIRE FIGHTING.
AENOR UNE-EN 1486:2008 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialized fire-fighting
UNE-EN 1486:2008 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
AENOR UNE-EN 62925:2018 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
UNE-EN IEC 60794-1-211:2021 Optical fibre cables - Part 1-211: Generic specification - Basic optical cable test procedures - Environmental test methods - Sheath shrinkage, Method F11 (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN 3745-305:2002 Aerospace series. Fibres and cables, optical, aircrfts use. Test methods. Part 305: Inmunity to ambient light (Endorsed by AENOR in August of 2002.)
UNE-EN 61300-3-40:1999 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-40: EXAMINATIONS AND MEASUREMENTS - EXTINCTION RATIO OF A POLARIZATION MAINTAINING (PM) FIBRE PIGTAILED CONNECTOR.

Comitato Elettrotecnico Italiano

CEI EN IEC 60794-1-22:2018 Optical fibre cables Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
CEI EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
CEI EN 61280-2-2:2013 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
CEI EN 61280-2-2/EC:2013 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
CEI EN IEC 60794-1-201:2024 Optical fiber cables – Part 1-201: Generic specification – Basic optical cable test procedures – Environmental test methods – Temperature cycling, Method F1
CEI EN 61300-2-44:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
CEI EN IEC 60974-1-215:2021 Optical Fibre Cables Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15
CEI EN IEC 60794-1-216:2025 Optical fibre cables – Part 1-216: Generic specification - Basic optical cable test procedures - Environmental test methods - Compound flow (drip), Method F16
CEI EN 62925:2017 Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability
CEI EN 60068-2-30:2006 Environmental testing - Part 2: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
CEI EN IEC 60794-1-208:2025 Optical fibre cables – Part 1-208: Generic specification - Basic optical cable test procedures - Environmental test methods - Pneumatic resistance, Method F8
CEI EN 60068-2-38:2012 Environmental testing - Part 2: Tests - Test Z/AD: Composite temperature/humidity cyclic test

Danish Standards Foundation

DANSK DS/EN 60794-1-22:2012 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
DANSK DS/EN IEC 60794-1-22:2018 Optical fibre cables – Part 1-22: Generic specification – Basic optical cable test procedures – Environmental test methods
DANSK DS/EN IEC 62892:2019 Extended thermal cycling of PV modules – Test procedure
DS/EN 60794-1-22:2012 Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
DS/EN 61280-2-2:2013 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
DANSK DS/EN 61280-2-2:2013 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
DANSK DS/ISO 16847:2016 Textiles – Test method for assessing the matting appearance of napped fabrics after cleansing
DANSK DS/IEC TR 63279:2020 Derisking photovoltaic modules – Sequential and combined accelerated stress testing
DANSK DS/IEC TS 62782:2016 Photovoltaic (PV) modules - Cyclic (dynamic) mechanical load testing
DS/EN 61300-2-44:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
DS/EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices
DANSK DS/EN 61300-2-44:2013 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-44: Tests – Flexing of the strain relief of fibre optic devices
DANSK DS/EN IEC 60794-1-215:2020 Optical fibre cables – Part 1-215: Generic specification – Basic optical cable test procedures – Environmental test methods – Cable external freezing test, Method F15
DANSK DS/EN 1486:2007 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
DS/EN 1486:2007 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
DS/EN IEC 60794-1-211:2021 Optical fibre cables – Part 1-211: Generic specification – Basic optical cable test procedures – Environmental test methods – Sheath shrinkage, method F11
DANSK DS/EN IEC 60794-1-211:2021 Optical fibre cables – Part 1-211: Generic specification – Basic optical cable test procedures – Environmental test methods – Sheath shrinkage, method F11
DANSK DS/EN 2591-6321 Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test
DANSK DS/EN 62925:2017 Concentrator photovoltaic (CPV) modules – Thermal cycling test to differentiate increased thermal fatigue durability
DS/EN 1486:2008 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
DS/ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
DANSK DS/EN IEC 60794-1-212:2024 Optical fibre cables – Part 1-212: Generic specification – Basic optical cable test procedures – Environmental test methods – Temperature cycling with cable elements fixed at both ends, Method F12

GM Europe

GME L-8C-3-2007 Thermal Shock Cycle Test for Mufflers

South African Bureau of Standard

SANS 61280-2-2:2006 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
SANS 61280-2-2:2009 Fibre optic communication subsystem test procedures Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement

Japanese Industrial Standards Committee (JISC)

JIS R 1750:2012 Fine ceramics -- Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
JIS C 61280-2-2:2010 Fiber optic communication subsystem test procedures -- Optical eye pattern, waveform and extinction ratio measurement
JIS C 61280-2-2:2017 Fiber optic communication subsystem test procedures -- Part 2-2: Optical eye pattern, waveform and extinction ratio measurement
JIS C 6870-1-22:2019 Optical fiber cables -- Part 1-22: Basic optical fiber cable test procedures -- Environmental test methods

Society of Automotive Engineers (SAE)

SAE AIR6282-2015 Fiber Optic Harsh Environment Test Methods Cross Reference Document
SAE AIR6282 Fiber Optic Harsh Environment Test Methods Cross Reference Document
SAE AIR6282A Fiber Optic Harsh Environment Test Methods Cross Reference Document
SAE AIR6282A-2021 Fiber Optic Harsh Environment Test Methods Cross Reference Document

Lithuanian Standards Office

LST EN 60794-1-22-2012 Optical fibre cables -- Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods (IEC 60794-1-22:2012)
LST EN 61280-2-2-2008 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2008)
LST EN 61280-2-2-2013 Fibre optic communication subsystem test procedures -- Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement (IEC 61280-2-2:2012)
LST EN 1486-2008 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
LST EN 61300-2-44-2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2008)
LST EN IEC 60794-1-215:2020 Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15 (IEC 60794-1-215:2020)
LST EN 60068-2-30-2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Association of German Mechanical Engineers

VDI 2165-1964 Pruefung von Desinfektionsapparaten
VDI 4202-2 E:2003-02 Minimum requirements for suitability tests of ambient air measuring systems – Optical remote sensing
VDI/VDE 5570 Blatt 3-2006 Testing of connectorised and non-connectorised polymer optical fibres - Testing of mechanical and environmental parameters
VDI/VDE 5570 Blatt 3-2003 Testing of connectorised and non-connectorised polymer optical fibres - Testing of mechanical and environmental parameters

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0885-802-2-2013 Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern@ waveform and extinction ratio measurement (IEC 61280-2-2:2012); German version EN 61280-2-2:2012
VDE 0126-892-2018 Test procedure for extended thermal cycling of PV modules (IEC 82/1344/CDV:2017); German and English version prEN 62892:2017
VDE 0472-233-1989*DIN VDE 0472-233:1989 Testing of cables, wires and flexible cords; changing of attenuation of optical fibre cables during temperature cycling

Netherlands Institute for Standardization

NEN 6306-1990 Vegetable and animal oils and fats Determination of extinction co?ffici?nt in the ultraviolet spectre

Ente Nazionale Italiano di Unificazione

UNI EN 1486:2008 Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting
UNI EN 2591-607:2003 Aerospace series - Elements of electrical and optical connection - Test methods - Optical elements - Immunity to ambient light coupling

American Society for Testing and Materials (ASTM)

ASTM E1171-04 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ASTM G7/G7M-21 Standard Practice for Natural Weathering of Materials

Standards Norway

NS-EN 1486:1996 Protective clothing for firefighters — Test methods and requirements for reflective clothing for specialized fire fighting
NS-EN 1486:2007 Protective clothing for fire-fighters — Test methods and requirements for reflective clothing for specialised fire-fighting
NS-EN 3745-402:2005 Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 402: Temperature cycling
NS-EN 15889:2011 Fire-fighting hoses — Test methods

(U.S.) Telecommunications Industries Association

EIA/TIA-455-96-1990 FOTP-96 Fiber Optic Cable Long-Term Storage Temperature Test for Extreme Environments
TIA-455-104-B-2016 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
TIA/EIA-455-104A-1993 FOTP-104 Fiber Optic Cable Cyclic Flexing Test
TIA-455-203-A-2009(2014) FOTP-203 Light Source Encircled Flux Measurement Method
TIA-455-203-A-2009 FOTP-203 Light Source Encircled Flux Measurement Method

European Committee for Standardization (CEN)

EN 61280-2-2:2005 Fibre optic communication subsystem test procedures —Part 2-2: Digital systems — Optical eye pattern, waveform and extinction ratio measurement
EN 2591-6321:2005 Aerospace series - Elements of electrical and optical connection Test methods Part 6321: Optical elements Damp heat, cyclic test

European Telecommunications Standards Institute (ETSI)

ETSI TS 102 869-2 V1.3.1 (2014-05)-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS & TP)
ETSI TS 102 869-2 V1.2.1 (2013-08)-2013 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
ETSI TS 102 869-2 V1.1.1 (2011-03)-2011 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
ETSI TS 102 869-2-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS & TP)
TS 102 869-2-2011 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
ETSI TS 102 869-2-2011 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
ETSI TS 102 869-2-2013 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
TS 102 869-2-2014 Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS & TP) (V1.3.1)
TS 102 869-2-2013 Intelligent Transport Systems (ITS); Testing; Conformance test specification for Decentralized Environmental Notification Messages (DENM); Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.2.1)

American Water Works Association (AWWA)

AWWA WQTC63959 Predicting Disinfection Byproducts Using Molecular Fluorescence

Aerospace, Security and Defence Industries Association of Europe (ASD)

PREN 2591-6321-1997 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 6321: Optical Elements Damp Heat@ Cyclic Test (Edition P 1)

Associação Brasileira de Normas Técnicas

ABNT EB-184-1964 Pressure circulation sterilizer

Others: Spectral test extinction curve,Extinction Ratio Test Factor,Extinction ratio tester,Extinction Ratio Test Scheme,Extinction test ring,Used Polarization Extinction Ratio Tester,Extinction ratio tester