Connection of two boards

Connection of two boards, Total:92 items.

The international standard classification for "Connection of two boards" includes: Welding equipment .

The Chinese standard classification for "Connection of two boards" includes: Welding and cutting equipment , Pipe fittings, clamps and seals .

Professional Standard - Machinery

JB/T 10113-1999 Resistance welding equipment. Secondary connecting cables with terminals connected to water cooled lugs. Dimensions and characteristics
JB/T 10113-2002 Resistance welding equipment - Secondary connecting cables with terminals connected to water - Cooled lugs - Dimensions and characteristics ( ISO 5828: 2001 IDT )

Group Standards of the People's Republic of China

T/CECA 61-2021 Two part connectors of 1.0mm 、 1.27mm 、 2.0mm 、 2.54mm pitch for printed circuit boards

Professional Standard - Aviation

HB 4-87-1976 Conduit flexible connection with two clamps
HB 4-88-1983 Flexible Connection for Conduit with Two Clamps
HB 4-87-1983 Flexible Connection for Conduit with Two Clamps
HB 4-88-1976 Conduit flexible connection with two clamps

Professional Standard - Railway

TB 1541.12-1984 The connecting plate of the lower rubbing block of the concave and convex die device of the cold stamping die

American National Standards Institute （ANSI)

ANSI/EIA 616:1996 Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes

Association Francaise de Normalisation

NF EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: connectors for printed boards - Particular specification for two-piece connector modules for printed boards and backplanes, 2.5 mm pitch
NF EN 61076-4-111:2004 Connectors for electronic equipment - Part 4-111: connectors for printed boards under quality assurance - Particular specification for two-part power connector modules, for printed boards and rear panels...
NF EN 61076-4-101:2002 Connectors for electronic equipment - Part 4-101: Connectors for printed boards under quality assurance - Particular specification for two-piece connector modules with a base pitch of 2.0 mm, for printed boards and...
NF EN 61076-4-113:2005 Connectors for electronic equipment - Connectors for printed cards - Part 4-113: particular specification for two-part connectors having 5 rows with a pitch of 2.54 mm for printed cards pluggable into the backplane, in...
NF EN 60169-25:1996 Connecteurs pour fréquences radioélectriques - Partie 25 : connecteur à deux pôles (3/4-20 UNEF) à verrouillage à vis, applicables à des câbles symétriques blindés ayant deux conducteurs intérieurs dont le diamètre intérieur du conducteur ...
NF C93-406-4-113*NF EN 61076-4-113:2005 Connectors for electronic equipment - Printed board connectors - Part 4-113 : detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications.
NF C93-406-4-114*NF EN 61076-4-114:2005 Connectors for electronic equipment - Part 4-114 : printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm

Danish Standards Foundation

DS/EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
DS/EN 61076-4-101:2002 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
DS/EN 61076-4-101/Corr.1:2004 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
DS/EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm
DS/EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
DS/EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

British Standards Institution (BSI)

BS EN 61076-4-104:1999 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm. Detail specification for two part modular c...
BS EN 61076-4-101:2001 Connectors for electronic equipment. Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
BS 9525 N0001:1982 Detail specification for multi-contact two-part printed board electrical connectors
BS EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 60603-5:1998 Connectors for frequencies below 3 MHz for use with printed boards. Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
BS EN 61076-4-113:2003 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 61076-4-116:2012+A1:2016 Connectors for electronic equipment. Product requirements - Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function
BS EN 60603-13:1998 Connectors for frequencies below 3 MHz for use with printed boards. Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in) with free connectors for non-accessible insulation displacement ...

GSO

BH GSO IEC 61076-4-100:2016 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
OS GSO IEC 61076-4-100:2014 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
GSO IEC 61076-4-100:2014 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
GSO IEC 61076-4-101:2014 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
OS GSO IEC 61076-4-113:2014 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
OS GSO IEC 60603-9:2014 Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)
GSO IEC 60603-9:2014 Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)

SCC

DANSK DS/EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
CEI EN 61076-4-100:2003 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
DANSK DS/EN 61076-4-101:2001 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
CEI EN 61076-4-101:2002 Connectors for electronic equipment Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
CEI EN 61076-4-111:2003 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5...
DANSK DS/EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5...
BS EN 61076-4-101:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors-Detail specification for two-part connector modules having a basic grid of 2,0 mm for printed boards and bac...
CEI EN 60603-9:2001 Connectors for frequencies below 3 MHz for use with printed boards Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
BS EN 61076-4-100:1998 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors-Detail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards an...
MIL MIL-DTL-28754/33E-2015 Connectors, Electrical, Modular, Connector Assembly, Type V, Style II, Slip Lock Cover Plate
MIL MIL-DTL-28754/32E-2015 Connectors, Electrical, Modular, Connector Assembly, Type V, Style I, Slip Lock Cover Plate
DANSK DS/EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
CEI EN 61076-4-113:2004 Connectors for electronic equipment - Printed board connectors Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
DANSK DS/EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)

ES-UNE

UNE-EN 61076-4-100:2001 Connectors for electronic equipment -- Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (Endorsed by AENOR in May of 2002.)
UNE-EN 61076-4-101:2001 Connectors for electronic equipment -- Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 (Endor...
UNE-EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (Endorsed by AENOR in June of 2003.)
UNE-EN 61076-4-104:1999 Connectors for use in d.c. low-frequency analogue and digital high speed data applications -- Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on ...

German Institute for Standardization

DIN EN 61076-4-101 Berichtigung 1:2010-10 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 - (IEC ...
DIN EN 61076-4-111:2002-12 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality; Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 ...
DIN 15155:1986 Pallets; box pallet with mesh side panels and 2 frontside flaps
DIN EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002); German version EN
DIN 3376-1:2023-02 Gas meter connections - Part 1: Two pipes connection; DVGW code of practice / Note: Date of issue 2023-01-13*Intended as replacement for DIN 3376-1 (2005-02).
DIN 3376-1:2005-02 Gas meter connections - Part 1: Two pipes connection; DVGW code of practice / Note: DIN 3376-1 (1993-02) remains valid alongside this standard until 2005-07-31.*To be replaced by DIN 3376-1 (2023-02).
DIN EN 60603-9:1998-07 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990); German version EN 60603-9:1998

Lithuanian Standards Office

LST EN 61076-4-100-2003 Connectors for electronic equipment. Part 4-100: Printed board connectors with assessed quality. Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes (IEC 61076-4-100:2001)
LST EN 61076-4-101-2002 Connectors for electronic equipment. Part 4-101: Printed board connectors with assessed quality. Detail specification for two-part connector modules, having a basic grid of 2, 0 mm for printed boards and backplanes in accordance with IEC 60917 (IEC 61076-
LST EN 61076-4-111-2003 Connectors for electronic equipment. Part 4-111: Printed board connectors with assessed quality. Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm i
LST EN 61076-4-101-2001 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 101: Detail specification for two-part connector modules having a basic grid of 2, 0 mm for pr

ECIA - Electronic Components Industry Association

IS-64-1991 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes
616-1996 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes
EIA/IS-753-1998 Two-Part High Density Blade and Backplane Tuning Fork Connector
EIA-616-A-2002 Detail Specification for 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes
EIA-700AAAB-1996 Detail Specification for 1.0 mm@ Two-Part Connectors for Use with Parallel Printed Boards

GB-REG

REG NASA-LLIS-0505-1994 Lessons Learned - Failure in a CPU Consisting of Two Boards could be due to Oxidation on the Connecting Pins

Korean Agency for Technology and Standards (KATS)

KS C IEC 60603-5:2004 Connectors for frequencies below 3 MHz for use with printed boards-Part 5:Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
KS C IEC 60603-5:2014 Connectors for frequencies below 3 MHz for use with printed boards — Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
KS E 6015-1992 Connection both rings of three-link chain
KS C IEC 60326-10-2003(2019) Through-connected flexible-rigid double-sided printed circuit board specifications
KS C IEC 60603-10:2005 Connectors for frequencies below 3 MHz for use with printed boards－Part 10：Two-part connectors for printed boards for basic grid of 2.54 mm(0.1 in), inverted type

WRC - Welding Research Council

BULLETIN 164-1971 PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS; PLASTIC TESTS OF TWO BRANCH-PIPE CONNECTIONS

European Committee for Electrotechnical Standardization（CENELEC）

EN 60603-5:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing
EN 175100:1992 Sectional Specification: Two Part and Edge Socket Connectors for Printed Board Application
EN 60603-9:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards, Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in)

IECQ - IEC: Quality Assessment System for Electronic Components

QC 480301XX0012-2002 Connectors for Electronic Equipment - Part 4-111: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Power Connector Modules@ for Printed Boards and Backplanes Having Early Mating Features@ and Having a Basic Grid of 2@5 mm

AENOR

UNE-EN 61076-4-111:2003 Connectors for electronic equipment -- Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 m
UNE-EN 60603-9:2001 Connectors for frequencies below 3 MHz for use with printed boards -- Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).

Electronic Components, Assemblies and Materials Association

ECA IS-753-1998 Two-Part High Density Blade and Backplane Tuning Fork Connector
ECA IS-84-1992 Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment
ECA EIA-616-A-2002 Detail Specification for 2 Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes [Superseded: ECA SP4644-A]

BE-NBN

NBN 844-1971 Connector

International Electrotechnical Commission (IEC)

IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
IEC 60603-5:1987 Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in) spacing

Defense Logistics Agency

DLA DSCC-DWG-89065 REV B-2003 GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE PRINTED CIRCUIT BOARD CONNECTOR

Others: Drilling steel screen with slotted lap holes and fishplate connections,How the two boards are connected,How to connect two boards,Connection of two boards