Absorption rate of various materials

Absorption rate of various materials, Total:236 items.

The international standard classification for "Absorption rate of various materials" includes: Photographic paper, films and cartridges , Thermosetting materials , Equipment for the chemical industry .

The Chinese standard classification for "Absorption rate of various materials" includes: Technical management , Technical Management , Basic standards and general methods for photosensitive material , Basic standards and general methods for synthetic resin and plastic , Non-metal chemical machinery equipment .

Yunnan Provincial Standard of the People's Republic of China

DB53/T 515-2013 Determination of feed liquid absorption rate of stem feed

未注明发布机构

FORD FLTM BN 015-3-2001 ENERGY ABSORPTION OF PADDING MATERIALS
FORD FLTM BN 015-03-2001 ENERGY ABSORPTION OF PADDING MATERIALS
FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

Professional Standard - Electron

SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment
SJ 20155-1992 General specification for radio frequency radiation absorber(microwave absorbing material)

Group Standards of the People's Republic of China

T/ZZB 2425-2021 Ferrous matrix composite of electromagnetic wave absorbing sheet
T/SCETIA 2001-2022 Determination of water absorption by volume for thermal insulating products

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9860-1995 of the water absorbility of silver halide photographic material
GB/T 39818-2021 Plastics—Thermosetting moulding materials—Determination of shrinkage

Professional Standard - Non-ferrous Metal

YS/T 1478-2021 Aluminum-based boron carbide neutron absorbing material

Professional Standard - Chemical Industry

HG/T 4370-2012 Gas absorption tower with composite material for chemical industry

Military Standard of the People's Republic of China-General Armament Department

GJB 2038-1994 Radar absorbing material reflectivity test method
GJB 2603-1996 Specification for highly thermally conductive microwave absorbing ceramic materials
GJB 2038A-2011 The measurement methods for reflectivity of radar absorbing material

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 4258-1999 Performance Comparison of Various Absorption Heat Transformers Using Nitrate-Based Absorbent Systems
ASHRAE AT-01-9-5-2001 Second Law Analysis of Various Double-Effect Lithium Bromide/Water Absorption Chillers

Association Francaise de Normalisation

NF T90-361:1997 Testing water. Determination of absorbant power all types of liquid.
NF S74-105:1985 Personal equipment for protection against heat. A method of measuring the total absorptivity of hemispherical radiation of the constituent materials.
NF T46-031:1979 Rubber, vulcanized. Methods of test for staining in contact with various organic materials.
XP E25-090:2023 Assemblies - Methodology for the design, development and production of assemblies made from all types of materials
NF EN 14952:2005 Sports floors - Determination of water absorption of unbound minerals
NF T90-361:2022 Water quality - Determination of the absorbing power of universal absorbent materials - Water and hydrocarbon retention capacity
NF L16-017*NF EN 4593:2013 Aerospace series - Paints and varnishes - Determination of solar absorptance
NF T90-360:2022 Water quality - Determination of the absorbing power of hydrophobic floating absorbent materials - Water and hydrocarbon retention capacity

Czech Standards Institute (UNMZ)

CSN 88 0126-1960 Mhcellaneous polygraphic materials. Terminology.
CSN 66 6635-1984 Determination of the swelling capacity and absorptivity of the photographic materials
CSN 49 0104-1987 Tests of native wood properties. Method of water absorptivity and hygroscopic determining
CSN 72 1155 ZZ1-2000 Determination of absorption and apparent porosity of natural building stones
CSN 65 4901-1953 absorber filler
CSN IEC 315-5:1995 Methods of measurement on radio receivers for various classes of emission.Part 5:Specialized radio-frequency measurements.Measurement on frequency-modulated receivers of the response to impulsive interference

United States Navy

NAVY MIL-A-17161 D-1985 ABSORBER, RADIO FREQUENCY RADIATION (MICROWAVE ABSORBING MATERIAL), GENERAL SPECIFICATION FOR

Danish Standards Foundation

DANSK DS/EN 60404-8-1:2015 Magnetic materials - Part 8-1: Specifications for individual materials - Magnetically hard materials
DANSK DS/EN 60672-3:1997 Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
DS/EN 60454-3-19:2003 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
DANSK DS/ISO/TS 23034:2021 Nanotechnologies – Method to estimate cellular uptake of carbon nanomaterials using optical absorption
DANSK DS/EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms
DANSK DS/EN IEC 60667-3-1:2020 Vulcanized fibre for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Flat sheets
DS/IEC 315-3:1990 Methods of measurement on radio receivers for various classes of emission. Part 3: Receivers for amplitude-modulated sound-broadcasting emissions
DANSK DS/EN 15926:2011 Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms
DS 2345:1989 Protective clothing. Garments for protection against chemicals. Types, materials, various requirements

Korean Agency for Technology and Standards (KATS)

KS C IEC 60404-8-1-2018 Magnetic materials — Part 8-1: Specifications for individual materials — Magnetically hard materials
KS C IEC 60404-8-1:2018 Magnetic materials — Part 8-1: Specifications for individual materials — Magnetically hard materials
KS C IEC 60404-8-6:2018 Magnetic materials — Part 8-6: Specifications for individual materials — Soft magnetic metallic materials
KS C IEC 60404-8-6-2018 Magnetic materials — Part 8-6: Specifications for individual materials — Soft magnetic metallic materials
KS C IEC 60672-3-2017 Ceramic and glass-insulating materials — Part 3: Specifications for individual materials
KS C IEC 60672-3-2022 Ceramic and glass-insulating materials — Part 3: Specifications for individual materials
KS F 2503-2007 Testing method for density and absorption of coarse aggregate
KS F 2503-1982 Testing method for density and absorption of coarse aggregate
KS C IEC 60454-3-19-2018 Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on bo
KS C IEC 60454-3-19:2018 Pressure-sensitive adhesive tapes for electrical purposes — Part 3: Specifications for individual materials — Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on bo
KS P ISO 17190-1-2011(2016) Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－
KS F 2504-2007 Testing method for density and absorption of fine aggregates
KS C 0305-2014(2019) Test method of measurement for the electromagnetic wave absorbing effectiveness of planar electromagnetic wave absorbing materials
KS C 0305-2014(2024) Test method of measurement for the electromagnetic wave absorbing effectiveness of planar electromagnetic wave absorbing materials
KS M 3027-1985(2001) TESTING METHODS FOR WATER AND BOILING WATER ABSORPTION OF PLASTICS
KS M ISO 20393-2022 Thermal-insulating materials－Determination of long-term water absorption by diffusion
KS C IEC 60684-3-229-2014(2019) Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, sh
KS C IEC 60684-3-211-2008(2023) Flexible insulating sleeving－Part 3：Specifications for individual types of sleeving－Sheet 211：Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2：1
KS M 3027-1985 TESTING METHODS FOR WATER AND BOILING WATER ABSORPTION OF PLASTICS
KS P ISO 17191-2011(2016) Urine-absorbing aids for incontinence－Measurement of airborne respirable polyacrylate superabsorbent materials－Determination of dust in collection cassettes by sodium atomic absorption spectrometry
KS C IEC 60684-3-228-2017 Flexible insulating sleeving — Part 3: Specifications for individual types of sleeving — Sheet 228: Heat-shrinkable semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink
KS P ISO 17190-5:2011 Urine-absorbing aids for incontinence － Test methods for characterizing polymer-based absorbent materials － Part 5: Gravimetric determination of free swell capacity in saline solution
KS C IEC 60667-3-1:2018 Specification for vulcanized fibre for electrical purposes — Part 3-1: Specifications for individual materials — Flat sheets
KS C IEC 60667-3-1-2018 Specification for vulcanized fibre for electrical purposes — Part 3-1: Specifications for individual materials — Flat sheets
KS M ISO 20393-2012(2022) Thermal-insulating materials－Determination of long-term water absorption by diffusion
KS P ISO 17304:2017 Dentistry ─ Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials

Military Standards (MIL-STD)

MIL-A-17161D NOT 1 General Specification for Absorber, Radio Frequency Radiation (Microwave Absorbing Material)
MIL MIL-A-17161D-1985 ABSORBER, RADIO FREQUENCY RADIATION (MICROWAVE ABSORBING MATERIAL), GENERAL SPECIFICATION FOR (SUPERSEDING MIL-A-17161C)

Comitato Elettrotecnico Italiano

CEI EN 60404-8-1:2016 Magnetic materials Part 8-1: Specifications for individual materials - Magnetically hard materials

South African Bureau of Standard

SANS 6231:1994 Footwear materials - Absorption and desorption of water
SANS 6229:1994 Footwear materials - Water vapour absorption
SANS 5249:2006 Determination of the absorbency rate of absorbent cotton wool

Ente Nazionale Italiano di Unificazione

UNI EN ISO 62:2008 Plastics - Determination of water absorption
UNI EN ISO 62:2001 Plastics - Determination of water absorption
UNI 10667-20:2024 Plastic raw-secondary materials - Part 20: Cellulose acetate for various uses from recycled pre-consumer and/or post-consumer materials - Requirements and test methods.
UNI 6543:1969 Glass fibre materials for thermal and acoustical insulation. Resin bonded felts and slabs and pipe covering. Determination of the water absorption.
UNI CEN/TS 15925:2009 Fertilizers - Extraction of total sulfur present in various forms
UNI 10667-5:2000 recycled plastic materials - Polyvinylchloride from plastic applications to be used for general purposes - Requirements and test methods
UNI 8515:1983 Plastics film and sheeting. Determination of the unrestraine linear shrinkage.
UNI 9092-2:1987 Wood preservative treatment. Pressure impregnation in a closed cylinder. Determination of the impregnating liquid net retention.

(U.S.) Telecommunications Industries Association

TIA-455-106-1992 FOTP 106 Procedures for Determining Threshold Current of Semiconductor Lasers

Yugoslav Association for Standardization

JUS D.C1.032-1982 Sawn timber of ali sort of poplar

Swedish Institute for Standards

MNC 335-1981 Metallic materials — D eterm i nation of various mechanical properties
MNC 335-1980 Metallic materials — Determination of various mechanical properties
MNC 335-1983 Metallic materials — Determination of various mechanical properties
SS 872202:1984 Incontinence aids of absorbing type - Determination of liquid absorption and retention capacity of absorbent material
MNC 335 E-1982 Metallic materials - Determination of various mechanical properties - Summary
MNC 335 E-1983 Metallic materials- Determination of various mechanical properties - Summary
MNC 335-1982 Metallic materials — D eter minatio n of various mechanical properties
MNC 335 E-1981 Metallic materials — Determination of various mechanical properties — Summary
MNC 335 E-1980 Metallic materials — Determination of various mechanical properties — Summary
SIS SS 87 22 02-1984 Incontinence aids of absorbing type - Determination of liquid absorption and retention capacity of absorbent material
SS-EN 4593:2011 Aerospace series - Paints and varnishes - Determination of solar absorptance
SS-EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms

Spanish Association for Standardization (UNE)

UNE-EN 60454-3-19:2004 Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
AENOR UNE 59534:1994 Footwear materials. Floors. Measurement of heat shrinkage of cellular materials.
AENOR UNE 53243-6:1974 Plastic materials. Fabrics covered with plastic materials. Determination of shrinkage.
UNE-CEN/TS 15925:2010 EX Fertilizers - Extraction of total sulfur present in various forms
AENOR UNE-EN 15925:2012 Fertilizers - Extraction of total sulfur present in various forms
UNE-CEN/TS 15926:2010 EX Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms
AENOR UNE-EN 15926:2012 Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms
UNE 56745:1988 HARDBOARDS. DETERMINATION OF PAINT ABSORPTION
UNE 48 047 Pigment absorption of oil
UNE-EN 15925:2012 Fertilizers - Extraction of total sulfur present in various forms
UNE 53359:1983 PLASTICS. PVC RESINS FOR GENERAL USE. DETERMINATION OF HOT PLASTICIZER ABSORPTION

European Committee for Standardization (CEN)

HD 426.3 S1-1987 Specification for ceramic and glass insulating materials; part 3: individual materials
EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms

British Standards Institution (BSI)

BS 2782-5 METHOD 502 TO 504:1958 Methods of testing plastics. Methods 502, 503 and 504 water absorption and water soluble matter, boiling water absorption and water vapour absorption
BS EN IEC 60667-3-1:2020 Vulcanized fibre for electrical purposes - Specifications for individual materials. Sheet 1. Flat sheets
DD CEN/TS 15925:2009 Fertilizers. Extraction of total sulfur present in various forms
BS PD ISO/TS 23034:2021 Nanotechnologies. Method to estimate cellular uptake of carbon nanomaterials using optical absorption
BS 7655-11.1:1997 Insulating and sheathing materials specification Part 11: Various insulating compounds
BS DD CEN/TS 15926:2009 Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms
DD CEN/TS 15926:2009 Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms
BS EN 60371-3-1:2006 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
ASTM C1763-20(2025)-25 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

American Society for Testing and Materials (ASTM)

ASTM E776-87(2009) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E776-87(2004) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E903-20 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E776-87(1996) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM F2622-08 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM RR-F02-1025 2008 F2622-Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM E1175-87(1996) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
ASTM F2622-08(2013) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F1983-99 Standard Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for Implant Applications
ASTM E1175-87(2022) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
ASTM F1983-99(2003) Standard Practice for Assessment of Compatibiltiy of Absorbable/Resorbable Biomaterials for Implant Applications
ASTM F1983-99(2008) Standard Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
ASTM E1175-87(2015) Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance, and Absorptance of Materials Using a Large Diameter Integrating Sphere
ASTM RR-C16-1042 2014 C1763-Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM RR-C16-1046 2016 C1763-Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM RR-C16-1051 2019 C1763-Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM D5288-97 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM F3191-23 Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
ASTM C1763-19e1 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM F798-97 Standard Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region
ASTM D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM C1763-20 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM F798-97(2002) Standard Practice for Determining Gettering Rate, Sorption Capacity, and Gas Content of Nonevaporable Getters in the Molecular Flow Region
ASTM C1763-19 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM E903:2022 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
BH GSO ASTM E1175:2022 Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance,and Absorptance of Materials Using a Large Diameter Integrating Sphere
BH GSO ISO 2577:2017 Plastics -- Thermosetting moulding materials -- Determination of shrinkage

Argentine Institute of Standardization

IRAM 12510-1949 Water absorbency of refractory materials, number of holes and methods of determination for certain types
IRAM 13318-1959 How to determine the water absorbency of plastics and water-soluble materials

Canadian General Standards Board （CGSB)

CAN/CGSB-25.14-M89-1989 Absorbent Material for Oils, Liquid Fuels and Water

GCC Standardization Organization

GSO ASTM E903:2021 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
GSO IEC 60404-8-10:2015 Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays
GSO ASTM E1175:2021 Standard Test Method for Determining Solar or Photopic Reflectance, Transmittance,and Absorptance of Materials Using a Large Diameter Integrating Sphere
GSO ISO 2577:2015 Plastics -- Thermosetting moulding materials -- Determination of shrinkage
GSO ISO 20393:2009 Thermal - insulating materials – Determination of long-term water absorption by diffusion
GSO ISO 17190-7:2016 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 7: Gravimetric determination of absorption under pressure
BH GSO ISO 20393:2024 Thermal - insulating materials – Determination of long-term water absorption by diffusion
GSO ISO 2836:2024 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents

Portuguese Institute of Quality

E 191-1966 Plastic material flat type. Water absorption test

Gosstandart of Russia

GOST R 53377-2009 Sound absorbing materials used in buildings. Assessment of sound absorption
GOST 18055-1972 Textil. Methods of determination color difference
GOST 24816-1981 Building materials. Method of hygroscopic moisture determination
GOST 12175-1990 Common test methods insulating and sheathing materials of electric cables. Methods for determining the density. Water absorption and shrinkage tests
GOST R 53376-2009 Sound absorbing materials. Sound absorption measurement method in reverberation room
GOST 34206-2017 Plastics. Method for determination of shrinkage of thermosetting materials
GOST EN 15926-2013 Fertilizers. Extraction of water soluble sulfur where the sulfur is in various forms

Conference of European Post Telecommunication (CEPT)

CEPT T/R 75-03 E-1985 Utilization of Frequencies Abroad for Various Applications
CEPT T/R 75-03 E-1988 Utilization of Frequencies Abroad for Various Applications (Nice 1985)

Society of Automotive Engineers (SAE)

SAE J2495_200809 Thermal Containment Efficiency of Sleeve Materials
SAE J2495_201102 Thermal Containment Efficiency of Sleeve Materials
SAE J2495_199904 Thermal Containment Efficiency of Sleeve Materials
SAE AS65010-4 AS65010 Bolt, 100° Countersunk, Spiral Drive, UNJF Threads (Various Materials & Finishes)
SAE AS65010-3 AS65010 Bolt, 100° Countersunk, Spiral Drive, UNJF Threads (Various Materials & Finishes)

Association of German Mechanical Engineers

VDI 3794 BLATT 2-2013 Determination of immission rates — Determination of the immission rate of ammonia and ammonium compounds using the IRMA method
VDI 3794 Blatt 2-2011 Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA-method

American Association of State Highway and Transportation Officials

AASHTO T 85-2022 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 84-2009 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2000 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2008 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2014 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 85-2010 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 84-2022 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2013 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-2008 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
AASHTO T 85-2013 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
AASHTO T 85-2021 Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate
T 84-2010 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate
T 84-1994 Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (ASTM C128-88)

American Water Works Association (AWWA)

AWWA MTC57630 Optimization of Various MBR Systems for Water Reclamation
AWWA WQTC52783 Selectivity and Adsorptivity of Various Anions in Ion-Exchange Membranes

Polski Komitet Normalizacyjny (PKN)

PN P04781-12-1989 Textile dressing materials Determination of water absorptivity

Standards Norway

SN-CEN/TS 15925:2009 Fertilizers — Extraction of total sulfur present in various forms
NS-EN 15925:2011 Fertilizers - Extraction of total sulfur present in various forms
NS-EN 15926:2011 Fertilizers - Extraction of water soluble sulfur where the sulfur is in various forms
SN-CEN/TS 15926:2009 Fertilizers — Extraction of water soluble sulfur where the sulfur is in various forms
NS-EN 12947:2000 Liming materials — Determination of magnesium content — Atomic absorption spectrometric method

Standard Association of Australia （SAA）

AS 2836.6:1985 Methods of testing surgical dressings and surgical dressing materials, Method 6: Method for the determination of absorption rate and water holding capacity
AS 2909.4:1986 Methods of measurement on radio receivers for various classes of emission - Radio-frequency measurements on receivers for frequency-modulated sound-broadcasting emissions
AS 1774.5:1975 Methods for physical testing of refractories and refractory materials, Method 5: The determination of density, porosity and water absorption

Bureau of Indian Standards

IS 11285-1985 Various tests on raw materials for direct reduction in coal-based rotary kilns
IS 1448 Pt.105-1981 Test methods for petroleum and its products [P: 105] Ultraviolet (UV) absorption and absorbance of petroleum products
IS 12193 Pt.2-1987 Methods of measurement of radio receivers of various emission categories Part 2 RAP1O Frequency measurements of AM sound broadcasting transmitters and receivers

Magyar Szabványügyi Testület

MSZ 21132-1980 Anti-corrosion absorbent materials (Kate Perth)
MSZ 1740/16-1984 Various parts of structural materials used in the production of boilers and pressure cookers

German Institute for Standardization

DIN EN 15925:2011-12 Fertilizers - Extraction of total sulfur present in various forms; German version EN 15925:2011
DIN 50131:1974 Testing of Metallic Materials; Determination of Shrinkage
DIN 50131:1974-07 Testing of Metallic Materials; Determination of Shrinkage
DIN EN 15925 E:2011 Draft Document - Fertilizers - Extraction of total sulfur present in various forms; German version FprEN 15925:2011
DIN EN 15925 E:2011-03 Draft Document - Fertilizers - Extraction of total sulfur present in various forms; German version FprEN 15925:2011
DIN 54802:1987 Test plastic polyvinyl chloride (VC) polymers for plasticizer absorption under hot conditions and determination of the absorption rate
DIN EN 12087:2006 Thermal insulation materials for construction – Determination of water absorption during long-term immersion

US Federal Contractor Registration (USFCR)

FCR NE-F-11-2T-1985 ANALYTICAL CHEMISTRY METHODS FOR BORON CARBIDE ABSORBER MATERIAL

International Organization for Standardization (ISO)

ISO/TS 23034:2021 Nanotechnologies - Method to estimate cellular uptake of carbon nanomaterials using optical absorption
ISO 2577:2007 Plastics - Thermosetting moulding materials - Determination of shrinkage

Swiss Association for Standardization (SNV)

VSM 11855-1974 plastic. Thermosetting molding materials. Determination of shrinkage

GM Europe

GME STD 518554-2001 Air-borne sound absorbent Luftljudsabsorbent English/Swedish

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 2577:2015 Plastics -- Thermosetting moulding materials -- Determination of shrinkage
OS GSO ISO 20393:2009 Thermal - insulating materials – Determination of long-term water absorption by diffusion
OS GSO ISO 17190-7:2016 Urine-absorbing aids for incontinence -- Test methods for characterizing polymer-based absorbent materials -- Part 7: Gravimetric determination of absorption under pressure

Chile Instituto Nacional de Normalización

INDITECNOR 39-32d Pigments: oil absorption

American Society of Mechanical Engineers (ASME)

ASME SEC III D1 MA APP NF-III-2001 Appendix NF-III Energy Absorbing Support Material

Engineering Sciences Data Unit (ESDU)

ESDU 75030 C-1995 Natural frequencies of rectangular flat plates with various edge conditions.

Cuban Institute of Standards and Metrology

NC 54-312-1985 Construction Materials and Products Raw Materials for Ceramics. Determination of Density and Absorption

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 4593:2002 Aerospace Series Non-Metallic Materials Paints and Varnishes Test Method Determination of Solar Absorptance

Indonesia Standards

SNI 06-6853-2002 Calculation methods of sodium adsorption ratio in water

Japanese Industrial Standards Committee (JISC)

JIS K 7224:1996 Testing method for water absorption rate of super absorbent polymers

Finnish Standards Institute

SFS-ISO 2577 E:1986 This standard is approved in English