Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)

Quadrupole RF Power

Quadrupole RF Power, Total:151 items.

The international standard classification for "Quadrupole RF Power" includes: Acoustics and acoustic measurements , Aircraft and space vehicles in general , Special measuring equipment for use in telecommunications , Receiving and transmitting equipment .

The Chinese standard classification for "Quadrupole RF Power" includes: Acoustic Measurement , Basic standards and general methods , Radio Measurement , Technical management , Mobile communication equipment , Radio communication equipment , Coupling, brake and speed variator .


General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 45726-2025 Acoustics—Determination of high-frequency sound power levels emitted by machinery and equipment

Professional Standard - Aerospace

Military Standard of the People's Republic of China-General Armament Department

  • GJB/J 3413-1998 Radio frequency medium power meter calibration procedures
  • GJB 7401-2011 General specification for relays,electromagnetic,radio frequency,established reliability
  • GJB 7084-2010 General specification for RF solid state power amplifier model
  • GJB 8263-2014 General specification for radio frequency power fixed resistors

National Metrological Verification Regulations of the People's Republic of China

National Metrological Technical Specifications of the People's Republic of China

  • JJF 1678-2017 Calibration Specification for RF & Microwave Power Amplifiers
  • JJF 2009-2016 Calibration system table for radio frequency and microwave power measuring instruments
  • JJF 1885-2020 Calibration Specification for RF and Microwave Power Meters
  • JJF 1887-2020 Calibration Specification for RF & Microwave Power Sensors

Professional Standard - Electron

  • SJ 20732-1999 General specification for radio frequency power amplifier mobile communication
  • SJ 20877-2003 General specification for military RF power amplifier
  • SJ/Z 9096.1-1987 Methods of measurement for radio equipment used in mobile services - Part 5: Recivers for single-sideband emissim (A3A, A3H or A3J)

Jiangsu Provincial Standard of the People's Republic of China

  • DB32/T 3415-2018 Test method for minimum activation power of UHF radio frequency identification tags

Professional Standard - Post and Telecommunication

  • YD/T 4179-2023 30MHz~1GHz Micro-power short-distance radio transmission equipment radio frequency test method
  • YD/T 1978-2009 Measurement method for radiated RF power and receiver performance of 2GHz WCDMA mobile stations
  • YD/T 1484-2011 Measurement method for radiated RF power and receiver performance of mobile stations
  • YD/T 1977-2009 Measurement method for Radiated RF power and receiver performance of 2GHz TD-SCDMA mobile stations
  • YD/T 1484-2006 Measurement Method for Radiated RF Power and Receiver Performance of Mobile Stations
  • YD/T 4178-2023 9kHz~30MHz micro-power short-distance radio transmission equipment radio frequency test method
  • YD/T 4180-2023 1GHz~40GHz Micropower Short-distance Radio Transmitting Equipment RF Test Method

Professional Standard - Machinery

Professional Standard - Radio Television Film

  • GY/T 273-2013 Technical requirements and measurement methods of low power SW multifrequency broadcasting transmitters

IET - Institution of Engineering and Technology

Korean Agency for Technology and Standards (KATS)

  • KS I ISO 9295-2019 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment
  • KS I ISO 9295:2019 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment
  • KS I ISO 9295-2024 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment
  • KS C IEC TR 63239-2022 Radio frequency beam wireless power transfer(WPT) for mobile devices
  • KS C IEC TR 63239:2022 Radio frequency beam wireless power transfer(WPT) for mobile devices
  • KS C 5216-2002 RELIABILITY ASSURED LOW FREQUENCY POWER TRANSISTORS (MEDIUM AND HIGH POWER)
  • KS C OIMLR 46-2003(2008) Active electrical energy meters for direct connection(Class 2)

Spanish Association for Standardization (UNE)

  • UNE-EN 302208 V3.1.1:2017 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the ...
  • UNE-EN 302208 V3.3.1:2020 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum (Endorsed by Asociación Espa...
  • UNE-EN 302208 V3.4.1:2024 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum (Endorsed by Asociación Espa...
  • UNE-EN IEC 61169-1-6:2023 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
  • UNE 20-651 Pt.1-1984 Measurement methods used in radio transmitters. General conditions for measurement, frequency, output power and power consumption
  • UNE 20833:1997 MEASUREMENT OF POWER-FRECUENCY ELECTRIC FIELDS.
  • UNE-EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015)

British Standards Institution (BSI)

  • BS EN IEC 61169-1-6:2022 Radio-frequency connectors - Electrical test methods. RF power.
  • BS 4196-2:1991 Sound power levels of noise sources-Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms
  • BS 4196-2:1981 Sound power levels of noise sources-Precision methods for determination of sound power levels for discrete-frequency and narrow-band sources in reverberation rooms
  • BS 4196-4:1981 Sound power levels of noise sources-Engineering methods for determination of sound power levels for sources in free-field conditions over a reflecting plane
  • 20/30414068 DC BS EN IEC 61169-1-6. Radio-frequency connectors. Part 1-6. Electrical test methods. RF power
  • BS EN ISO 9295:2015 Acoustics. Determination of high-frequency sound power levels emitted by machinery and equipment
  • PD IEC TR 63239:2020 Radio frequency beam wireless power transfer (WPT) for mobile devices
  • BS PD IEC TR 63239:2020 Radio frequency beam wireless power transfer (WPT) for mobile devices
  • BS 4196-6:1981 Sound power levels of noise sources-Survey method for determination of sound power levels of noise sources

Association Francaise de Normalisation

  • NF EN 302208:2020 Radio frequency identification equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Standard h...
  • NF Z84-208:2020 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W-Harmonised Standard for access to radio spectrum (V3.3.1)
  • NF C93-560-1-6*NF EN IEC 61169-1-6:2022 Radio-frequency connectors - Part 1-6 : electrical test methods - RF power
  • NF EN IEC 61169-1-6:2022 Radio Frequency Connectors Part 1-6: Electrical Test Methods - RF Power
  • NF S31-111*NF EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • NF Z84-208-2*NF EN 302208-2:2015 Electromagnetic compatibility and radio spectrum matters (ERM) - Radio frequency identification equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Part 2 : harmon
  • NF Z84-208-1*NF EN 302208-1:2015 Electromagnetic compatibility and radio spectrum matters (ERM) - Radio frequency identification equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Part 1 : techni
  • NF EN ISO 9295:2015 Acoustics - Determination of high frequency sound power levels emitted by machinery and equipment
  • NF S31-022:1992 ACOUSTICS. DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES. PRECISION METHODS FOR BROAD-BAND SOURCES IN REVERBERATION ROOMS. (EUROPEAN STANDARD EN 23741).

American National Standards Institute (ANSI)

  • ANSI C63.9-2008 RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts
  • ANSI S1.32-1980 Precision Methods for the Determination of Sound Power Levels of Discrete-Frequency and Narrow-Band Noise Sources in Reverberation Rooms
  • ANSI S12.32-1990(R1996) Precision Methods for the Determination of Sound Power Levels of Discrete-Frequency and Narrow-Band Noise Sources in Reverberation Rooms
  • ANSI/ASA S1.6-1984 Preferred Frequencies, Frequency Levels, and Band Numbers for Acoustical Measurements
  • ANSI S1.6-1984 Preferred Frequencies, Frequency Levels, and Band Numbers for Acoustical Measurements

U.S. Air Force

RO-ASRO

  • STAS 9174/1-1989 Radio transmitters FREQUENCY, OUTPUT POWER, POWER CONSUMPTION Methods of measurement

International Telecommunication Union (ITU)

European Telecommunications Standards Institute (ETSI)

  • ETSI EN 302 208:2020 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum
  • ETSI EN 302 208-2016 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Dir

PL-PKN

  • PN-ETSI EN 302 208 V3.3.1-2021-04 E Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W − Harmonised Standard for access to radio spectrum

Danish Standards Foundation

  • DANSK DS/ETSI EN 302 208 V3.3.1:2020 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum
  • DANSK DS/EN IEC 61169-1-6:2022 Radio-frequency connectors – Part 1-6: Electrical test methods – RF power
  • DANSK DS/EN 302 208 V3.1.1:2016 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the ...
  • DANSK DS/IEC TR 63239:2020 Radio frequency beam wireless power transfer (WPT) for mobile devices
  • DANSK DS/EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment

European Committee for Electrotechnical Standardization(CENELEC)

  • EN IEC 61169-1-6:2022 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
  • HD 236.1-1975 Methods of Measurement for Radio Transmitters Part 1: General Conditions of Measurement, Frequency, Output Power and Power Consumption

German Institute for Standardization

  • DIN EN 302208:2020-10 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Harmonised Standard for access to radio spectrum (Endorsement of the English ...
  • DIN VDE 0855-300:2008-08*VDE 0855-300:2008-08 Transmitting/receiving systems for transmitter RF output power up to 1 kW
  • DIN EN 302208-1:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Part 1: Technic
  • DIN EN 302208-2:2015 Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W - Part 2: Harmoni
  • DIN EN IEC 61169-1-6:2023 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power (IEC 61169-1-6:2022); German version EN IEC 61169-1-6:2022
  • DIN EN ISO 9295 E:2013-07 Determination of high frequency sound power levels of acoustic machinery and equipment (draft)
  • DIN EN IEC 61169-1-6 E:2023 Draft Document - Radio-frequency connectors - Part 1-6: Electrical test methods - RF power (IEC 61169-1-6:2022); German version EN IEC 61169-1-6:2022
  • DIN EN IEC 61169-1-6:2023-05 Draft Document - Radio-frequency connectors - Part 1-6: Electrical test methods - RF power (IEC 61169-1-6:2022); German version EN IEC 61169-1-6:2022
  • DIN EN ISO 9295:2015-09 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment (ISO 9295:2015); German version EN ISO 9295:2015
  • DIN 41900:1968 Radio Frequency Transmitter Capacitors for rated voltages higher than 1 kV and rated powers higher than 0,2 kVA

International Electrotechnical Commission (IEC)

  • IEC 61169-1-6:2022 Radio-frequency connectors - Part 1-6: Electrical test methods - RF power
  • IEC 62980:2022 Parasitic communication protocol for radio-frequency wireless power transmission
  • IEC TR 63239:2020 Radio frequency beam wireless power transfer (WPT) for mobile devices
  • IEC 60244-1:1968 Methods of measurement for radio transmitters. Part 1 : General conditions of measurement, frequency, output power and power consumption

Swedish Institute for Standards

Comitato Elettrotecnico Italiano

Defense Logistics Agency

TR-TSE

  • TS 2709-1977 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES — PRECISION METHODS FOR DISCRETE — FREQUENCY AND NARROW - BAND SOURCES IN REVERBERATION ROOMS

Society of Automotive Engineers (SAE)

  • SAE J1113/3-2006 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
  • SAE J2556-2014 Radiated Emissions (RE) Narrowband Data Analysis - Power Spectral Density (PSD)
  • SAE J2556-2010 Radiated Emissions (RE) Narrowband Data Analysis Power Spectral Density (PSD)
  • SAE AS56D-2018 LEVER ENDS - FUEL AND POWER CONTROL
  • SAE AS56C-2012 LEVER ENDS - FUEL AND POWER CONTROL
  • SAE AS56B-1950 LEVER ENDS - FUEL AND POWER CONTROL
  • SAE AS56C-1954 Lever Ends-Fuel and Power Control
  • SAE AS56A-1949 LEVER ENDS - FUEL AND POWER CONTROL
  • SAE J1113/3-1995 Conducted Immunity, 250 kHz to 5000 MHz, Direct Injection of radio Frequency (RF) Power
  • SAE J1113/3_201008 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
  • SAE J1113-3-2006 Conducted Immunity@ 250 kHz to 400 MHz@ Direct Injection of Radio Frequency (RF) Power
  • SAE J1113-3-2010 Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft)
  • SAE J1113/3_200609 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
  • SAE J1113/3-2010 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power
  • SAE J1113/3_199511 Conducted Immunity, 250 Khz to 5000 Mhz, Direct Injection of Radio Frequency (Rf) Power

Military Standards (MIL-STD)

  • MIL MIL-PRF-27/247D-2008 TRANSFORMERS AND INDUCTORS, (AUDIO, POWER AND HIGH-POWER PULSE), TRANSFORMER, AUDIO FREQUENCY
  • MIL MIL-T-27/214B-2012 Transformers and Inductors (Audio, Power and High-Power Pulse), Inductors, Audio Frequency
  • MIL MIL-DTL-28875/8B-2010 Amplifiers, Radio-Frequency and Microwave, Solid-State, Power, Wideband, to Configuration
  • MIL MIL-DTL-28875/8C-2015 Amplifiers, Radio-Frequency and Microwave, Solid-State, Power, Wideband, to Configuration
  • MIL MIL-T-55309-1971 TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( )(NO S/S DOCUMENT)
  • MIL MIL-T-27/163D-2012 Transformers and Inductors (Audio, Power and High-Power Pulse), Inductors, Audio Frequency, High Q
  • MIL MIL-T-27/162B-2009 Transformer and Inductors (Audio, Power and High-Power Pulse), Inductors, Audio Frequency, High Q
  • MIL MIL-T-27/247C-1993 TRANSFORMERS AND INDUCTORS (AUDIO, POWER AND HIGH-POWER PULSE), TRANSFORMER, AUDIO FREQUENCY, TF4R21AJ316 (SUPERSEDING MIL-T-27/247B)
  • MIL MIL-T-27/142C-1992 TRANSFORMERS AND INDUCTORS (AUDIO, POWER AND HIGH-POWER PULSE) INDUCTORS, AUDIO FREQUENCY, TF5R20ZZ (SUPERSEDING MIL-T-27/142B)

Standard Association of Australia (SAA)

  • AS 1174.1:1971 Methods of measurement for radio transmitters - General conditions of measurement, frequency, output power and power consumption
  • AS ISO 9295:2019 Acoustics — Determination of high-frequency sound power levels emitted by machinery and equipment

TIA - Telecommunications Industry Association

  • TIA/EIA-455-203-2001 FOTP-203 Launched Power Distribution Measurement Procedure for Graded-Index Multimode Fiber Transmitters

Gosstandart of Russia

  • GOST 8.392-1980 State system for ensuring the uniformity of measurements. Low power SHF wattmeters and their primary measuring transformers of frequency range 0,03-78.33 GHz. Verification means and methods
  • GOST 21106.16-1979 Oscillator tubes with anode dissipated power above 25 W. Measurement methods of power, input voltage and determination frequency characteristics
  • GOST 8.569-2000 State system for ensuring the uniformity of measurements. Low power SHF vattmeters of frequency range 0,02-178,6 GHz. Verification and calibration methods

AT-OVE/ON

  • OVE EN IEC 61169-1-6:2021 Radio frequency connectors - Part 1-6: Electrical test methods- RF power (IEC 46F/563/CDV) (english version)

International Organization for Standardization (ISO)

  • ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • ISO/IEC 14443-2:2020/Amd 1:2021 Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Amendment 1: Dynamic power level management

AT-ON

  • ONORM S 5034-1978 Determination of sound power of noise sources; free-field measurement over a reflecting plane

ETSI

  • ETSI EN 302 208-2020 Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum

Ente Nazionale Italiano di Unificazione

  • UNI EN ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

CZ-CSN

  • CSN 36 7117-1-1999 Methods of measurement for rádio transmitters Part 1: General conditions of measurement, frequency, output power and power consumption

European Committee for Standardization (CEN)

  • EN 23742:1991 Acoustics; determination of sound power levels of noise sources; precision method for discrete-frequency and narrow-band sources in reverberation rooms (identical with ISO 3742:1988)