Aperture Specifications

Aperture Specifications, Total:101 items.

The international standard classification for "Aperture Specifications" includes: Geotextiles , Ceramic products , Photographic equipment. Projectors , Fiber and cables .

The Chinese standard classification for "Aperture Specifications" includes: Other textile articles , Special ceramics , Lens , Length Measurement , Optical communication equipment .

未注明发布机构

DIN 66139 E:2010-02 Pore size analysis - Representation of pore size distributions

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1967-1996 Test method for pore diameter of porous ceramic
GB/T 14799-1993 Geotextiles－Determining apparent opening size of a geotextile by sieving

Professional Standard - Machinery

JB/T 7384.18-1994 Fasteners Gauges for bore diameter of gaskets
JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
JB/T 7384.16-1994 Fasteners Plug gauges for bore size of rivets
JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1524-2013 Technical regulations for small aperture measuring instruments with large depth-to-diameter ratio

Group Standards of the People's Republic of China

T/QGCML 741-2023 Pile hole diameter detection device

Taiwan Provincial Standard of the People's Republic of China

CNS 5674-1980 Cutter Bore
CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)
CNS 3594-1988 Bore Diameter of Milling Cutters

Professional Standard - Aerospace

QJ/Z 19-1984 Screw Hole Blank Inner Diameter Smooth Plug Gauge

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 027-2008 Calibration Specifications for Relative Aperture Testers
JJF 1806-2020 Calibration Specification for Measuring Equipmentof Diameter of Micro and Small Hole

National Metrological Verification Regulations of the People's Republic of China

JJG 467-1986 Precision Bore Diameter Measuring Instrument

Military Standard of the People's Republic of China-General Armament Department

GJB 6692-2009 General specification forairborne synthetic aperture radar

Professional Standard-Ships

CB/T 4436-2019 Synthetic aperture sonar

Professional Standard - Post and Telecommunication

YD/T 816-2003 Multimode optical fibre with large core diameter and large numerical aperture
YD/T 816-1996 Multimode optical fibre with large core diameter and large numerical aperture

British Standards Institution (BSI)

BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
BS EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
BS EN 14848:2020 Aerosol containers. Metal containers with 25,4 mm aperture. Dimensions of valve cups
BS EN 14848:2006 Aerosol containers. Metal containers with 25,4 mm aperture. Dimensions of valve cups
BS EN 14848:2005 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups
BS EN 2309:1990 Specification for hole sizes for solid rivets
BS PAS 1188-1:2009 Flood protection products - Specification - Building aperture products
BS PAS 1188-1:2014 Flood protection products. Specification. Building aperture products

HU-MSZT

MSZ 4427-1965 Screw hole drill bit. Single unit specification diameter=10-40
MSZ 4558/1-1980 Micro holes in grinding tools. Overview of hole specifications

RO-ASRO

STAS 2561/4-1990 Foundation ground LARGE DIAMETER DRILLED PILES Design, construction and acceptance general specifications

European Committee for Standardization (CEN)

EN 15008:2017 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25@4 mm aperture

German Institute for Standardization

DIN 66139:2012-03 Pore size analysis - Representation of pore size distributions / Note: To be replaced by DIN 66139 (2022-12).
DIN 66139:2022-12 Pore size analysis - Representation of pore size distributions / Note: Date of issue 2022-11-18*Intended as replacement for DIN 66139 (2012-03).
DIN 66139:2012 Pore size analysis - Representation of pore size distributions
DIN 2246-1:2008-07 Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 3357-3:1981 Reduced bore steel ball valves
DIN 2247-1:2008-07 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter

CZ-CSN

CSN ON 44 2121-1964 The inner diameter of the coal mine. Inner diameter specification
CSN 22 1601-1985 Countersinks and counterbores. Technical specifications
CSN 13 2370-1975 Reducers. Technical specifications
CSN 72 2624-1977 Radial bricks. Material specification
CSN 72 2613-1966 Burnt facing bricks perforated

IPC - Association Connecting Electronics Industries

IPC TM-650 2.2.6A-1997 Hole Size Measurement@ Drilled
IPC TM-650 2.2.6-1973 Hole Size Measurement@ Drilled
IPC TM-650 2.2.7A-1986 Hole Size Measurement@ Plated

RU-GOST R

GOST 9523-1984 Shanks for tool. Diameters, squares and holes for driving squares. Dimensions
GOST 14034-1974 Centre holes. Dimensions
GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 31592-2012 Machine reducers. General specifications

SCC

DIN 66139 E:2010 Draft Document - Pore size analysis - Representation of pore size distributions
AENOR UNE 26011:1950 INSTRUMENT HOLE DIAMETERS
NS 5075:1973 Rolling bearings - Bore diametres
AENOR UNE 56861:1990 ARMORED DOOR HOLE UNIT. SPECIFICATIONS
BS 5731-1:1979 Specification for apertures and mountings for controls for external equipments in protective cabs on agricultural tractors-Apertures
DIN 9802 E:2015 Draft Document - Food processing machinery - Bore of cylinder head for mincers - System Unger

IN-BIS

IS 5989-1971 Hole milling cutter specifications
IS 3529-1966 Eyelet pliers specifications
IS 6422-1972 Punch, paper, single hole (sleeve punch) specifications
IS 5370-1969 Flat washer specifications for outer diameter ≈ 3 x inner diameter
IS 7480-1974 SIMPSON type punch specifications
IS 10728-1983 Nail, square, radius specifications
IS 6975-1973 Reamer, trochanter, orthopedic reamer specifications
IS 9915-1981 Lens Aperture Marking Specification for Still Cameras
IS 7745-1975 Dimensions of lubrication holes, grooves and bores

SE-SIS

SIS SMS 1724-1965 Drilling diameter

American Society for Testing and Materials (ASTM)

ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids

Korean Agency for Technology and Standards (KATS)

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS B 1006-1975 Hole Sizes Before Threading
KS B 5409-2013 Photographic lenses ? Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-1982 Photographic lenses ? Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-1998 Photographic lenses-Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-2013(2018) Photographic lenses?Methods for the measurement of the effective aperture, F-number and relative aperture
KS X ISO 10549-2007(2022) Micrographics－A6 size aperture cards

NL-NEN

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm
NEN 2810-1987 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

Japanese Industrial Standards Committee (JISC)

JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and screws
JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture