Experimental moisture

Experimental moisture, Total:292 items.

The international standard classification for "Experimental moisture" includes: Plant growing , Animal husbandry and breeding , Chemical analysis , Chemical reagents , Farming and forestry in general , Astronomy. Geodesy. Geography .

The Chinese standard classification for "Experimental moisture" includes: Seed and seeding , Domesticate animal , Standardization, quality management , Basic standards and general methods , Chemical reagent in general , Cereal crop and product , Photogrammetry and Remote Sensing , Seed, seedling, seedling nursery .

Professional Standard - Agriculture

ZB B 21001-1987 Indoor inspection method for seed authenticity of indica rice sterile line (or hybrid) and maintainer line
SN/T 3402-2012 Identification genuineness and purity of two-line rice varieties using DNA analysis method
水产品质量安全检验手册 1.5.1.0-2005 Chapter 1 General Introduction Section 5 Laboratory Inspection and Analysis Basis 1. Analytical Laboratory Water Specifications and Test Methods (GB 6682-1992)
NY/T 66-1987 Method for oryza sativa indica male sterile line maintainer line and F&sub1 true to variety seed testing
GB 6682-1992 Analytical laboratory water specifications and test methods

Gansu Provincial Standard of the People's Republic of China

DB62/T 781.2-2002 Membrane side seeder test method
DB62/T 4094-2020 Grass variety authenticity inspection regulations SSR marking method

Group Standards of the People's Republic of China

T/YNBX 045-2022 Cultivation Technical Specifications for Field Identification of Rice Variety Authenticity
T/CALAS 53-2018 Laboratory animals -General requirement for preservation organization of laboratory animal microorganism
T/ZZB 1577-2020 Mobile laboratory for detection of urban water supply
T/ZNZ 167.3-2023 Standard-complex for Lishui rice-fish integrated farming Part 3：rice cultivation
T/CECS 849-2021 Geometric quantity measurement laboratory engineering technical regulations
T/SLEA 0031.3-2022 Technical requirements for laboratory water and gas fittings Part 3: Sink
T/STAX 006-2023 Special equipment inspection—Based on augmented reality devices Part 1：General technical specifications
T/CGSS 013-2020 Guides of the diagnosis for monoclonal gammaglobulin in clinical laboratories
T/GGI 039-2018 Chishui Dendrobium nobile Part III: Seed and Seedling Quality
T/CECS 10371-2024 Mobile laboratory for urban water supply quality testing
T/SZRCA 004-2023 Robot special cable laboratory capability assessment specification
T/SLEA 0031.1-2022 Technical requirements for laboratory water and gas fittings Part 1:Faucet

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 2930.8-2017 Rules of seed testing for forage,turfgrass and other herbaceous plant—Determination of moisture content

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2930.8-2001 Rules for forage seed testing--Determination of moisture content
GB/T 24867-2010 Determination of moisture content of forage seed—Moisture meters method
GB/T 19563-2004 Experimental identification method for variety variety of soybean seed - ISSR
GB/T 6682-2008 Water for analytical laboratory use - Specification and test methods
GB/T 3543.5-1995(XG1-2015) Crop Seed Inspection Rules for Authenticity and Variety Purity Identification
GB/T 6682-1992 Water for laboratory use; Specifications
GB/T 3543.6-1995 Rules for agricultural seed testing-Determination of moisture content
GB/T 20396-2006 Identification of genuineness and varietal purity of three-line hybrid rice and its parents with DNA analysis method
GB/T 3543.5-1995 Rules for agricultural seed testing-Verification of genuineness and cultivar
GB/T 3543.5-1995/XG1-2015 Crop Seed Inspection Rules for Authenticity and Variety Purity Identification
GB/Z 34792-2017 Laboratory animal-Technical specification for breeds introducing

农业农村部

NY/T 2745-2021 Rice (Oryza sativa L.) variety genuineness identification—SNP based method

Anhui Provincial Standard of the People's Republic of China

DB34/T 3501-2019 Laboratory testing specification for automatic soil moisture sensor
DB34/ 028-1990 Regulations for Quality Inspection of Hybrid Rice Propagation and Seed Production
DB34/T 197-1999 Genetic fingerprinting method for authenticity and variety purity of hybrid rice and its parental seeds
DB34/T 196-1999 Genetic fingerprinting method for authenticity and variety purity of hybrid rice and its parental seeds

Hunan Provincial Standard of the People's Republic of China

DB43/T 2599-2023 Technical regulations for independent testing of low-cadmium rice varieties
DB43/T 860-2014 SSR Molecular Marker Method for Authenticity and Purity Identification of Hybrid Rice Seeds

Ningxia Provincial Standard of the People's Republic of China

DB64/T 1009-2014 SSR Marking Method for Authenticity Identification of Rice Varieties in Ningxia

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40039-2021 Validation of soil moisture remote sensing products
GB/T 40742.3-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 3:Functional gauges and fixtures—Verification when applying maximum material requirements and minimum material requirements

Professional Standard - Commodity Inspection

SN/T 2660-2010 Preservation methods for culture collection in foodstuff microbiology laboratory

Fujian Provincial Standard of the People's Republic of China

DB35/T 81-1997 Regional Test Methods for New Rice Varieties

Guangdong Provincial Standard of the People's Republic of China

DB44/T 2341-2021 Technical specifications for conservation and breeding of experimental animals monkeys

Taiwan Provincial Standard of the People's Republic of China

CNS 7491-1998 Method of Test for Radionuclides of Radium in Water
CNS 15077-1-2007 Test conditions for machining centers - Part 1 : Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)

Professional Standard - Water Conservancy

SL 684-2014 Classification and rating standard for water environmental monitoring laboratory

Beijing Provincial Standard of the People's Republic of China

DB11/T 199.6-2003 Rules of field testing for vegetable varietal genuineness and purity Part 6:Tomato
DB11/T 199.2-2003 Rules of field testing for vegetable varietal genuineness and purity Part 2: Chinese cabbage
DB11/T 199.5-2003 Rules of field testing for vegetable varietal genuineness and purity Part 5: Turnip
DB11/T 199.7-2003 Rules of field testing for vegetable varietal genuineness and purity Part 7: Pepper
DB11/T 199.10-2003 Rules of field testing for vegetable varietal genuineness and purity Part 10: Leguminous Vegetables
DB11/T 199.8-2003 Rules of field testing for vegetable varietal genuineness and purity Part 8: Cucumber
DB11/T 199.1-2003 Rules of field testing for vegetable varietal genuineness and purity Part 1: General rules
DB11/T 199.9-2003 Rules of field testing for vegetable varietal genuineness and purity Part 9: Watermelon
DB11/T 199.4-2003 Rules of field testing for vegetable varietal genuineness and purity Part 4:Cauliflower
DB11/T 199.3-2003 Rules of field testing for vegetable varietal genuineness and purity Part 3: Cabbage

水利部

SL/T 684-2014 Classification and grading standards for water environment monitoring laboratories

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2589-2016 Experimental method for molecular identification of provenance-associated sequence polymorphism (SRAP) in eastern white pine
DB21/T 1861.1-2010 Isoenzyme electrophoresis analysis method for water product germplasm inspection technical regulations

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 2853-2015 Technical specification for crop variety testing rice
DB32/T 4188-2021 Hygienic requirements for drinking water for experimental animals

Military Standard of the People's Republic of China-General Armament Department

GJB 8670.8-2015 Special ammunition effect test method Part 8: Arson bomb arson effect test live ammunition firing method

Hubei Provincial Standard of the People's Republic of China

DB42/T 224-2002 Operation rules for field planting inspection of "three-line" parents and hybrids of hybrid rice

Professional Standard - Forestry

LY/T 1772-2008 Molecular identification method for varieties of poplar - Amplified fragment length polymorphism(AFLP)

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2136-2020 Guidelines for the Implementation of Risk Classification Management and Control of Special Equipment

Shanghai Provincial Standard of the People's Republic of China

DB31/T 1187-2019 Guidelines for the implementation of risk classification management and control of special equipment

Zhejiang Provincial Standard of the People's Republic of China

DB3309/T 13.1-2018 Putuo Narcissus Part 1 Bulbs

International Organization for Standardization (ISO)

ISO 1130:1975 Textile fibres; Some methods of sampling for testing
ISO 1130:1975/Amd 1:1976 Textile fibres; Some methods of sampling for testing
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO 10791-1:2015 Test conditions for machining centres - Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
ISO 3534-3:1985 Statistics; Vocabulary and symbols; Part 3 : Design of experiments Bilingual edition
ISO 10360-1:2000 Geometrical Product Specifications (GPS) - Acceptance and reverification test for coordinate measuring machines (CMM) - Part 1: Vocabulary
ISO 8531:1986 Manganese and chromium ores; Experimental methods for checking the precision of moisture determination
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO 1122-2:1999 Vocabulary of gear terms - Part 2: Definitions related to worm gear geometry
ISO 11274:1998 Soil quality - Determination of the water-retention characteristic - Laboratory methods
ISO 772:1996 Hydrometric determinations - Vocabulary and symbols
ISO/TS 7013:2023 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods

Korean Agency for Technology and Standards (KATS)

KS K ISO 1130:2007 Textile fibres－Some methods of sampling for testing
KS B 4918-1995 Machine tools-geometric accuracy tests and practical tests-Test methods
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS B 7940-2016(2021) Test method for paddy planting machine
KS M ISO 3696-2010(2020) Water for analytical laboratory use－Specification and test methods
KS M ISO 3696:2010 Water for analytical laboratory use-Specification and test methods
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS M ISO 3696-2020 Water for analytical laboratory use－Specification and test methods
KS B ISO 10791-1-2016(2021) Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis)
KS B ISO 10791-1:2016 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis)
KS B ISO 10791-1:2021 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle(horizontal Z-axis)
KS E ISO 8531:2003 Manganese and chromium ores－Experimental methods for checking the precision of moisture determination
KS I ISO 11274:2005 Soil quality－Determination of the water retention characteristic(Laboratory method)
KS B ISO 17450-1:2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification

Indonesia Standards

SNI ISO 1130:2010 Textile fibres-Some methods of sampling for testing
SNI 7628.5-2011 Seed testing of forestry plants - Part 5: Moisture content
SNI 7908-2013 Box-type rice sowing tools and machines (dapok) - Part 2: Soil and seed seeders - Quality requirements and test methods

GSO

GSO 1435:2002 Sanitary appliances - Methods of test for flushing apparatus
GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
GSO ISO 8531:2017 Manganese and chromium ores -- Experimental methods for checking the precision of moisture determination
OS GSO ISO 15680:2013 Water quality – Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
OS GSO ISO 8531:2017 Manganese and chromium ores -- Experimental methods for checking the precision of moisture determination
BH GSO ISO 15680:2016 Water quality – Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
GSO ISO 15680:2013 Water quality – Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
OS GSO ISO 10791-1:2015 Test conditions for machining centres -- Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis)
GSO ISO 230-7:2008 Test code for machine tools - Part 7: Geometric accuracy of axes of rotation
OS GSO 377:1994 Code of practice for the inspection and testing of steam and hot water boilers --Part7: Periodic hydrostatic tests
BH GSO ASTM D2216:2023 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
GSO ASTM D2216:2022 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
GSO ISO 3696:2009 Water for analytical laboratory use – Specification and test methods
OS GSO ISO 17450-1:2015 Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification

IN-BIS

IS 4880 Pt.2-1976 Code of Practice for Design of Water Conveyance Tunnels Part Ⅱ Geometric Design
IS 8770-1978 Specifications for artificial seawater for laboratory use

CL-INN

INDITECNOR 62-40 Water for experimental analysis

British Standards Institution (BSI)

BS EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
BS EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
BS EN ISO 15680:2003 Water quality. Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
BS 6316:1992 Code of Practice for test pumping of water wells
BS ISO 10791-1:1998 Test conditions for machining centres. Geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
BS ISO 10791-1:2015 Test conditions for machining centres Part 1 : Geometric tests for machines with horizontal spindle (horizontal Z - axis)
BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods

VN-TCVN

TCVN 4851-1989 Water for analytical laboratory use.Specifications and test methods
TCVN 4196-2012 Soils.Laboratory methods for determination of moisture and hydroscopic water amount

Japanese Industrial Standards Committee (JISC)

JIS B 6191:1993 Machine tools -- Geometric accuracy tests and practical tests -- Tests methods

RO-ASRO

STAS 6279-1979 AGRICULTURAL SEEDS FOR SEEDING Determinatlon of sorts, species and types authenticity by laboratory methods
STAS 4813/2-1973 BAUXITE Detenninalion of moisture content of laboratory sample
STAS 7444-1979 SEEDS FOR SOWING Test reports and permissible differences between tests
SR 1628-1-1995 Water supplies. Groundwater sources investigations, field studies and laboratory researches
STAS 6124/1-1973 AGRIGULTURAL SE1?DS Determination of moisture
STAS SR ISO 8531:1996 Manganese and chromium ores - Experimental method for checking the precision of moisture determination
STAS SR 6124-1-1999 Agricultural seeds Determination of moisture

Military Standards (MIL-STD)

DOD A-A-54342-1991 LOOP, INOCULATING, LABORATORY (QUANTITATIVE)
DOD A-A-53020-1987 BEAD, LABORATORY

HU-MSZT

MNOSZ 6355-1953 Potato seeds. Laboratory testing
MNOSZ 6624-1956 laboratory. water bath
MSZ 260/7-1971 Sewage testing experiments
MNOSZ 6627-1952 Laboratory triangular sink
MNOSZ 6629-1952 Laboratory hot water testing
MSZ 6760-1959 WASSERMANN sink for laboratory use
MSZ 24000/7-1981 Laboratory analysis of carbon, determination of water content
MNOSZ 6623-1956 Cylindrical laboratory water bath
MNOSZ 6622-1956 Hemispherical laboratory water bath

Association Francaise de Normalisation

XP P41-280:2008 Effect of materials on the quality of water intended for human consumption . Objects constituted by several components among which at least organic one entering the contact of the water . Obtaining and analysis of the water of migration
NF E11-150-1*NF EN ISO 10360-1:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 1 : vocabulary
NF ISO 10791-1:2016 Conditions d'essai pour centres d'usinage - Partie 1 : essais géométriques des machines à broche horizontale (axe Z horizontal)
NF EN 12738:1999 Biotechnology - Research, development and analysis laboratory - Guide for the containment of animals inoculated with microorganisms used for experimental purposes
NF P28-104*NF EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
NF EN 15154-1:2006 Safety showers for laboratories - Part 1: body showers connected to the water network used in laboratories
NF EN 15708:2010 Water Quality – Guide for the Study, Sampling and Laboratory Analysis of Phytobenthos in Shallow Watercourses
NF EN 13286-2:2010 Mixtures treated and mixtures not treated with hydraulic binders - Part 2: test methods for laboratory determination of reference density and water content - Proctor compaction
NF EN ISO 17450-1:2012 Geometric Product Specification (GPS) - General Concepts - Part 1: Model for Geometric Specification and Verification

IT-UNI

UNI 2876-1945 Chemistry laboratory equipment. Metal water bath. List of common categories
CNR-UNI 10010-1964 Soil test. The actual unit weight of a soil
UNI 2072-1942 Glass for chemical laboratories. List of common types of switches
UNI 2939-1945 Chemistry laboratory equipment. Bunsen burner. List of common categories
UNI 6687-1973 Standard mortar. Water shrinkage measurement. laboratory test

German Institute for Standardization

DIN 12918-1:1999 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-1:1999-05 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN ISO 3696:1991 Water for analytical laboratory use; specification and test methods; identical with ISO 3696:1987
DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN EN 12738:1999-10 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments; German version EN 12738:1999
DIN EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments; German version EN 12738:1999
DIN EN ISO 15680:2004-04 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003); German version EN ISO 15680:2003
DIN 12898 E:2018-10 Laboratory taps; outlet nozzles
DIN 12898:1992 Laboratory taps; outlet nozzles
DIN EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); English version of DIN EN ISO 664:2008-11
DIN EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
DIN 1164-10:2004 Special cement - Part 10: Composition, requirements and conformity evaluation for special common cement
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45 E:2013-08 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011); German version EN ISO 17450-1:2011

SCC

AWWA WQTC52914 Using Ultraviolet Light to Achieve Multiple Water Quality Objectives
AWWA JAW6745 Journal AWWA — Comparison of Several Instrumental Methods for Determining Chlorine Residuals in Drinking Water
AWWA CO50834 An Approach for Influencing Water Users' Behavior to Achieve Water Conservation
CSA Z316.1-M1979-1979 Laboratory Water Baths
DANSK DS/EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
06/30141610 DC ISO 20612. Water quality. Interlaboratory comparisons for proficiency testing of analytical testing laboratories
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
DANSK DS/EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
NS-EN 12738:1999 Biotechnology — Laboratories for research, development and analysis — Guidance for containment of animals inoculated with microorganisms in experiments
AWWA WQTC60700 Evaluation of Several Field Test Kits for Determining Concentrations of Arsenic in Drinking Water
BS 3978:1966 Specification for water for laboratory use
AWWA WQTC60644 Implementation of an Ethics Program in a Water Quality Laboratory
NS-EN 13848-5:2008 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels
AWWA ACE92163 Bench-Scale Evaluation of the Impact of Ozonation and Coagulation on Disinfection By-Product Formation in Eighteen Waters
DANSK DS/EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
AWWA ACE61737 Developing a Practical Approach to Determining Groundwater under the Influence
AENOR UNE-EN 13848-5+A1:2011 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels - Plain line
AWWA ACE61845 Iron-Impregnated GAC Adsorbents for Achieving Multiple Water Quality Goals (Arsenic Removal)
AWWA WQTC52943 Achieving Multiple Water Quality Goals Using Ozone, BAC, and Peroxide
AASHTO T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 265-2022 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 265-2015(2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AWWA SOURCES59235 Water: A Commodity of Dichotomies
AWWA IMTECH51391 Laboratory Information System Plus: An Integrated Approach
DANSK DS/EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
AWWA WQTC56945 Sequential Disinfection With UV Irradiation and Chlorine Species on Several Important Waterborne Pathogens
AASHTO T 265-1993(2004) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
MIL MIL-H-36973-1973 HOLDER, LABORATORY NEEDLE, INOCULATING, KOLLE, 10 INCH (S/S BY A-A-53591)
BS PD ISO/TS 7013:2023 Water quality. Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
DANSK DS/ISO/TS 7013:2023 Water quality – Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
CSA B181.3-1971 Polyolefin drainage systems for laboratories
DIN 12898:2019 Laboratory taps - Outlet nozzles
NS-EN ISO 15680:2003 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
CAN/CSA-B181.3-M86-1986 Polyolefin Laboratory Drainage Systems
CSA B181.3-1999 Polyolefin Laboratory Drainage Systems
DIN 38402-45 E:2013 Draft Document - German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
AWWA WQTC71356 Key Steps to Follow in Replacing a LIMS (Laboratory Information Management System) in Your Laboratory: A Case Study of a Water Quality Laboratory
AWWA WQTC69310 Water Laboratory Alliance: WCIT and NEMI-CBR, Secure Databases for Laboratory Analysis during Incident Response
DANSK DS/EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
AENOR UNE-EN ISO 3696:1996 Water for use in laboratory analysis. Specification and test methods. (ISO 3696:1987).

RU-GOST R

GOST R 52501-2005 Water for analytical laboratory use. Specifications
GOST 28842-1990 Hydraulic turbines. Methods of field acceptance tests

American Society for Testing and Materials (ASTM)

ASTM C1222-05 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-05a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-13e1 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-99 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-21 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-13 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1893-24 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
ASTM D3856-95(2000) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM C1222-19 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1222-19a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM D3856-95(2006) Standard Guide for Good Laboratory Practices in Laboratories Engaged in Sampling and Analysis of Water
ASTM C1222-03 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
ASTM E2935-21 Standard Practice for Evaluating Equivalence of Two Testing Processes
ASTM C1893-23 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
ASTM D3856-11(2015) Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
ASTM E2175-01 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers

CZ-CSN

CSN 99 6423-1988 Vertical cylindrical tanks. Calibration by geometrical methods. Verification
CSN 72 1012-1980 Laboratory determination of moisture content of soils
CSN 72 1104-1955 Laboratory determination of water absorption in soil

BE-NBN

NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods

API - American Petroleum Institute

API PUBL 4599-1994 Interlaboratory Study of Three Methods for Analyzing Petroleum Hydrocarbons in Soils
API PUBL 4694-1999 Laboratory Analysis of Petroleum Industry Wastewaters Arranging for Analysis and Understanding Laboratory Reports
API PUBL 4551-1994 Treatment of Gasoline-Contaminated Groundwater Through Surface Application Part I - Laboratory Experiments

US-FCR

FCR COE ETL 1110-2-309-1988 WATER AND WASTEWATER LABORATORY INSPECTIONS
FCR COE ETL 1110-2-268-1981 WATER AND WASTEWATER LABORATORY INSPECTIONS
FCR COE ETL 1110-2-244-1979 WATER AND WASTEWATER LABORATORY QUALITY CONTROL

South African Bureau of Standard

SANS 3696:1987 Water for analytical laboratory use - Specification and test methods
SANS 1808-30:2004 Water supply and distribution system components Part 30: Laboratory water taps
SANS 1808-31:2003 Water supply and distribution system components Part 31: Automatic control valves

KR-KS

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS B ISO 10791-1-2021 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle(horizontal Z-axis)
KS B ISO 10791-1-2016 Test conditions for machining centres — Part 1: Geometric tests for machines with horizontal spindle and with accessory heads(horizontal Z-axis)
KS B ISO 17450-1-2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification

IL-SII

S.I.335/1-1972 DEMINERALISED WATER FOR LABORATORY USE

Lithuanian Standards Office

LST EN 12738-2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
LST EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
LST EN 12155-2002 Curtain walling - Watertightness - Laboratory test under static pressure

Spanish Association for Standardization (UNE)

UNE-EN 12738:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
UNE-EN 13848-5:2009 Railway applications - Track - Track geometry quality - Part 5: Geometric quality levels
UNE 66-802-1989 Organization and implementation of laboratory proficiency tests
UNE-EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003)
UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
UNE 80103:2013 Test methods of cements. Physical analysis. Actual density determination.
UNE-EN ISO 3696:1996 WATER FOR ANALYTICAL LABORATORY USE. SPECIFICATION AND TEST METHODS. (ISO 3696:1987).

Danish Standards Foundation

DS/EN 12738:2000 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
DS/EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
DS-håndbog 114.4:2021 Geometrical product specifications (GPS) – Part 4: GPS standards on geometry – Specifcation and verification
DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS/EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
DS-håndbog 114.4:2013 Geometrical product specifications (GPS) - Part 4: GPS standards on geometry - Specifcation and verification
DS/EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE MN-00-6-4-2000 Experimental Evaluation of Five Refrigerants as Replacements for R-22
ASHRAE QC-06-057-2006 Infiltration Heat Recovery@ Part II- Laboratory Studies of Two Test Panel Geometries (RP-1169)

European Committee for Standardization (CEN)

EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
EN ISO 3696:1995 Water for Analytical Laboratory Use- Specification and Test Methods (ISO 3696 : 1987)
EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure

US-COE

COE ETL 1110-2-244-1979 WATER AND WASTEWATER LABORATORY QUALITY CONTROL

The American Road & Transportation Builders Association

AASHTO T 265-2015(R2019) Standard Method of Test for Laboratory Determination of Moisture Content of Soils
AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO - American Association of State Highway and Transportation Officials

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

Standard Association of Australia （SAA）

AS 1038.1:2001 Coal and coke - Analysis and testing - Higher rank coal - Total moisture
AS 1289.5.4.1:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.4.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio