Dimension Nominal

Dimension Nominal, Total:192 items.

The international standard classification for "Dimension Nominal" includes: Limits and fits , Integrated circuits. Microelectronics , Flanges, couplings and joints , Horology in general , Piping systems .

The Chinese standard classification for "Dimension Nominal" includes: Pipe fittings, clamps and seals , Microcircuit in general , Pipeline fittings , Horology .

Professional Standard - Aviation

HB 4-2-2002 Nominal dimension of tube

Professional Standard - Petroleum

SY/T 5698-1995 Oil well pipe nominal size

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1047-2019 Pipework components-Definition and selection of nominal size
GB/T 7092-2021 Outline dimensions of semiconductor integrated circuits
GB/T 38762.1-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 1:Linear sizes

Professional Standard - Light Industry

QB/T 2267-2015 Limits and fits for timekeeping instruments―Standard tolerance value of inserted middle tolerance grade for nominal size up to 18mm

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1047-2005 Pipework components - Definition and selection of DN(nominal size)

Professional Standard-Ships

CB/T 4180-2011 Normal size for ventilation pipe line and accessories for ships metric series

Taiwan Provincial Standard of the People's Republic of China

CNS 4578-1978 Bolted Connections with Reduced Booy Metric Thread with Large Clearence, Nominal Values and Limits

Association Francaise de Normalisation

NF E44-121:1993 End-suction centrifugal pumps (rating 16 bar). Designation, nominal duty point and dimensions.
NF E22-385:1987 INDUSTRIAL CYLINDRICAL ROLLERS. NOMINAL DIMENSIONS.
NF E48-701:1993 Hydraulic fluid power. Filters. Definitions, nominal pressures, nominal sizes, fitting dimensions.
NF E48-100:1986 FLUID POWER. QUANTITIES,UNITS AND SYMBOLS. NOMINAL PRESSURE RANGE.
NF E29-001*NF EN ISO 6708:1995 Pipework components. Definition and selection of dn (nomianl size).
NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF E01-001:1967 Nominal linear dimensions from 1 mm to 500 mm for mechanical engineering.
NF R12-102*NF ISO 7649:1992 Clutch housings for reciprocating internal combustion engines. Nominal dimensions and tolerances.
NF E75-078:1983 COATED ABRASIVES. ANY BACKING ROLLS. DESIGNATION. DIMENSIONS AND TOLERANCES.
NF P98-531:1991 PERMANENT ROAD TRAFFIC SIGNS. PRINCIPAL DIMENSIONS OF TRAFFIC SIGNS. VALUES AND DIMENSIONAL TOLERANCES.
NF E44-125*NF EN 734:1995 Side chanel pumps pn 40. Nominal duty point, main dimensions, designation system.
NF ISO 7649:1992 Cloches d'embrayage pour moteurs alternatifs à combustion interne - Dimensions nominales et tolérances.

European Committee for Standardization (CEN)

prEN 734-1992 Side channel pumps PN 40; nominal duty point, main dimensions, designation system
prEN 22858-1992 End-suction centrifugal pumps (rating 16 bar); designation, nominal duty point and dimensions (ISO 2858:1975)
prEN 733-1992 End-suction centrifugal pumps, rating with 10 bar with bearing bracket; nominal duty point, main dimensions, designation system
EN ISO 6708:1995 Pipework Components - Definition and Selection of DN (Nominal Size) (ISO 6708 : 1995)
EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
EN ISO 1127:1996 Stainless Steel Tubes - Dimensions, Tolerances and Conventional Masses Per Unit Length ISO 1127: 1992

SCC

DIN 13-22 E:2023 Draft Document - ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 25 mm to 52 mm
BS 192:1924 Dimensions of British standard spanners up to two-inch nominal size
NS 6270:1985 Round hand-holes - Nominal size 200, 250 and 400
NS 1779:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 25
NS 1778:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 16
NS 1781:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 16
NS 1789:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 400
NS 1787:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 250
NS 1784:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 64
NS 1788:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 320
NS 1775:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 2,5
NS 1783:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 40
NS 1785:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 100
NS 1780:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 40
NS 1786:1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 160
NS 1782:1981 Flanges - Dimensions of flanges of cast steel - Nominal pressure PN 25
NS 1777:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 10
NS 1776:1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 6
BS 5686:1979 Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions
DIN 21530-2 E:2016 Draft Document - Mine support - Part 2: Dimensions, designation and statical values
DANSK DS/EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size)
NS-EN ISO 1127:1996 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)

YU-JUS

JUS K.D3.004-1982 Tvvist drills. Nominal diameters
JUS C.B5.010-1990 Pipe components. Definition of nominal size
JUS M.D1.060-1988 Cranes. Wheefs. Nominal diametres and tvDes
JUS M.B3.012-1984 Countersunk head rivets. Nominal diameters 1 to 8 mm
JUS M.B3.013-1984 Mushroom head rivets. Nominal diameters 1,6 to 6 mm
JUS M.B3.011-1984 Round head rivets. Nominal diameters 1 to 8 mm
JUS M.B3.021-1984 Round head rivets. Nominal diameters 10 to 36 mm
JUS M.B3.022-1984 Countersunk head rivets. Nominal diameters 10 to 36 mm
JUS M.B3.031-1984 Fiat countersunk head rivets. Nominal diameters 3 to 5 mm
JUS M.B3.014-1984 Fiat round head rivets. Nominal diameters 1,4 to 6 mm

Korean Agency for Technology and Standards (KATS)

KS B 4098-2020 Nominal dimension of wood planers
KS B 2305-2006(2016) Nominal size and bore of valves
KS B 2305-1986 Nominal size and bore of valves
KS B 2305-2021 Nominal size and bore of valves
KS F 1518-2022 Standard nominal dimension of boards of buildings
KS B 2305-2006(2021) Nominal size and bore of valves
KS B 0214-2017(2022) Limits of sizes and tolerances for metric fine screw threads
KS B 0211-1987(2022) Limits of Sizes and Tolerances for Metric Coarse Screw Threads
KS F 1513-2022 Standard nominal dimension of wall components for building
KS F 1514-2022 Standard nominal dimension of floor components for building
KS F 2222-2021 Standard nominal dimension of sanitary unit for dwellings
KS B ISO 2858-2004(2009) End-sunction centrifugal pumps(rating 16 bar)－Designation, nominal duty point and dimensions
KS F 1514-1982 Standard nominal dimension of floor components for building
KS F 1514-2002(2017) Standard nominal dimension of floor components for building
KS R 4088-2014 Clutch housings for reciprocating internal combustion engines-Nominal dimensions and tolerances
KS R 4088-2001 Clutch housings for reciprocating internal combustion engines-Nominal dimensions and tolerances
KS B ISO 6194-1-2002(2012) Rotary shaft lip type seals－Part 1：Nominal dimensions and tolerances
KS B ISO 6194-1:2002 Rotary shaft lip type seals-Part 1:Nominal dimensions and tolerances
KS B ISO 6194-1-2013 Rotary shaft lip type seals－Part 1：Nominal dimensions and tolerances
KS F 1517-2022 Standard nominal dimension of movable partition components for buildings
KS F 1516-1997 Standard nominal dimension of structure components for opening part of building
KS B 0402-1971 Limit gauges ( variation of dimensions, tolerances and ALLOWABLE VALUE OF abrasion)
KS R 4088-2001(2011) Clutch housings for reciprocating internal combustion engines-Nominal dimensions and tolerances

Danish Standards Foundation

DS/ISO 6708:1988 Pipe components. Definition of nominal size
DS/EN ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size)
DS 923:1954 Women's hosiery ware. Size designation and body dimensions
DS/ISO 6194-1:1989 Rotary shaft lip type seals. Part 1: Nominal dimensions and tolerances
DS 918:1959 Girl's hosiery ware. Size designation an body dimensions
DS 919:1959 Boy's hosiery ware. Size designation and body dimensions
DS/ISO 8653:1993 Jewellery - Ring-sizes - Definition, measurement and designation

International Organization for Standardization (ISO)

ISO 3179:1974 Coniferous sawn timber; Nominal dimensions
ISO 1929:1974 Abrasive belts — Designation, dimensions and tolerances
ISO 8903:1994 Broadleaved sawn timber - Nominal sizes
ISO 8903:2016 Broadleaved sawn timber - Nominal sizes
ISO 6708:1980 Pipe components; Definition of nominal size
ISO 2157:1984 Dental rotary instruments — Nominal sizes and designation
ISO 6708:1995 Pipework components - Definition and selection of DN (nominal size)
ISO 2422:1972 Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances
ISO 1127:1992 Stainless steel tubes; dimensions, tolerances and conventional masses per unit length
ISO 2229:1973 Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions
ISO 7649:1991 Clutch housings for reciprocating internal combustion engines; nominal dimensions and tolerances

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4525:1998 Abrasive belts - Dimensions, tolerances and designation
AS/NZS 4527:1998 Abrasive Sheets - Dimensions, Tolerances and Designation (ISO 2235: 1993)

GSO

GSO 399:1994 Pressure pipeline components -Definition of nominal size (Nominal diameter)-Nominal pressure.
OS GSO 399:1994 Pressure pipeline components -Definition of nominal size (Nominal diameter)-Nominal pressure.
GSO ISO 7648:2013 Flywheel housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances
GSO ISO 6708:2008 Pipe work components – Definition and selection of DN ( Nominal Size )
GSO ISO 7649:2013 Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances
OS GSO ISO 7649:2013 Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances
BH GSO ISO 7649:2016 Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances

German Institute for Standardization

DIN 16185:1991 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
DIN 16189:1991 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
DIN 16191:1991 Industrial 135° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
DIN 24550-1:2006-09 Fluid power - Hydraulic filters - Part 1: Definitions, nominal pressures, nominal sizes, fitting dimensions
DIN 83417:1987 Rope hatch; nominal size 300
DIN 16186:1991 Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges
DIN 83417 E:2017-02 Rope hatch; nominal size 300
DIN 83417:2018 Rope hatches - Nominal size 300
DIN 16182:1991 Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges
DIN 16190:1991 Industrial 90° angle stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges
DIN 103-4:1977-04 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 103-4:1971 ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
DIN 16181:1991 Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 110; dimensions and nominal ranges
DIN 405-1:1997 General purpose knuckle threads - Part 1: Profiles, nominal sizes
DIN 21530-2:2016-09 Mine support - Part 2: Dimensions, designation and statical values
DIN 87151:2015 Grey cast-iron coarse filters - DN 40 to DN 200, nominal pressure PN 2,5 - Compilation and dimensions
DIN ISO 7648:1988 Flywheel housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7648:1987
DIN 55201-1:1985 Machine tools; pallets for machine tools; nominal sizes up to 800 mm; form A
DIN 7164:1966 Workshop Plug Gauges and Spherical End Measuring Rods for ISO Fit Dimensions from 1 to 500 mm Nominal Dimensions; Gauge Dimensions and Manufacturing Tolerances
DIN 7163:1966 Workshop Gap Gauges and Check Gauges for ISO Fit Sizes from 1 to 500 mm Nominal Dimension; Gauge Dimensions and Manufacturing Tolerances
DIN 8234:1987 Hight of motion work in watches; nominal dimensions
DIN 30295-1:1973 Rounded Trapezoidal Threads; Nominal Dimensions
DIN 21530-2 E:2016-01 Mine support - Part 2: Dimensions, designation and statical values
DIN 5480-2:2015 Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
DIN 21530-2:2003 Mine support - Part 2: Dimensions, designation and statical values
DIN 21530-2:2016 Mine support - Part 2: Dimensions, designation and statical values
DIN 16174 Berichtigung 1:2018 Industrial straight stem liquid-in glass thermometer with round case, of nominal size 250; dimensions and nominal ranges; Corrigendum 1
DIN 5480-2:1991 Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
DIN 40200:1981 Nominal value, limiting value, rated value, rating - concepts
DIN 13-1:1999-11 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
DIN 2510-2:1971-08 Bolted Connections with Reduced Shank; Metric Thread with Large Clearence, Nominal Dimensions and Limits
DIN 5480-2 Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
DIN 24255:1978 End-suction centrifugal pumps, rating 10 bar, with bearing bracket; designation, nominal duty point, main dimensions
DIN 1027:2004-04 Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
DIN 1027:1963 Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
DIN 748-1:1970 Cylindrical Shaft Ends; Dimensions, Nominal Transmissible Torques
DIN 6341-2:1993-10 Draw-in collets; thread of the collets; nominal size, limit deviations
DIN EN ISO 228-1 Bb.1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation; Limits of size
DIN 24339 E:2012-05 Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing

Spanish Association for Standardization (UNE)

UNE 37204:1980 LEAD SHOT. DESIGNATION, DIMENSIONS AND TOLERANCES.
UNE 58307:1977 AERIAL ROPEWAYS. PREFERED NOMINAL VALUES FOR THE PRINCIPAL DIMENSIONS OF THE ESSENTIAL ROPEWAY ELEMENTS

Japanese Industrial Standards Committee (JISC)

JIS B 2001:1987 Nominal size and bore of valves
JIS B 0218:1980 Limit of sizes and tolerances for metric trapezoidal screw threads
JIS A 0009:1970 Nominal dimension of movable partition components for buildings
JIS B 0212:1973 Limits of sizes and tolerances for unified fine screw threads
JIS B 0210:1973 Limits of sizes and tolerances for unified coarse screw threads
JIS B 2402-1:2002 Rotary shaft lip type seals -- Part 1: Nominal dimensions and tolerances
JIS S 4700:2022 Jewellery -- Ring sizes -- Definition, measurement and designation

IT-UNI

UNI ISO 2904:1978 ISO trapezoidal metric thread. Nominal size
UNI 4535-1964 Triangular ISO metric thread. Nominal size

RO-ASRO

STAS 2114/2-1975 ISO TRAPEZOIDAL SCREW THREADS Nominal diameters and pitches
STAS 12100/6-1985 Kquipments for wellhcad CIIRISTMANS TREES FOR OIL ANI)GAS WELLS Nominal dimensions

RU-GOST R

GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions

KR-KS

KS B 0219-2008(2023) Limit of sizes tolerances for metric trapezoidal screw threads
KS B 0211-1987(2017)(英文版) Limits of Sizes and Tolerances for Metric Coarse Screw Threads

American Society for Testing and Materials (ASTM)

ASTM F1098-87(2010) Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24

NO-SN

NS 1782-1981 Flanges - Dimensions of flanges of cast steel - Nominal pressure PN 25
NS 1780-1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 40
NS 1786-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 160
NS 1788-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 320
NS 1778-1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 16
NS 1781-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 16
NS 1777-1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 10
NS 1787-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 250
NS 1775-1981 Flanges - Dimensions for flanges of cast iron - Nominal pressure PN 2,5
NS 1789-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 400
NS 1783-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 40
NS 1785-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 100
NS 1784-1981 Flanges - Dimensions for flanges of cast steel - Nominal pressure PN 64

CZ-CSN

CSN 17 7198-1964 Dimensions of weighing machine bridges
CSN 01 0202-1988 Nominal linear sizes

British Standards Institution (BSI)

BS ISO 4397:2011 Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes
BS EN ISO 6708:1996(1999) Pipework components — Definitionandselection of DN (nominal size)
BS EN 733:1995 End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system
BS 7007-6:1994 Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
BS 7780-1:1994 Specification for rotary shaft lip type seals - Nominal dimensions and tolerances