Dimensional Technical Analysis

Dimensional Technical Analysis, Total:454 items.

The international standard classification for "Dimensional Technical Analysis" includes: Limits and fits , Vacuum technology , Primary cells and batteries , Pipeline components and pipelines in general , Document imaging applications , Technical drawings , Technical drawings in general , Miscellaneous domestic and commercial equipment , Mechanical engineering drawings , Reproduction equipment , Turning tools , Valves , Textile machinery in general , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Dimensional Technical Analysis" includes: Microcircuit in general , Vacuum technique and equipment , Electrochemical power source , Library, Archives, Literature and Information , Basic standards and general methods , Pipeline fittings , Culture, education and drawing instruments, notebooks and cards , Printing Technology , Cutting tools , Valve , Railway passenger coaches , Textile machinery and apparatus in general , School sanitation .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38762.2-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 2:Dimensions other than linear or angular sizes
GB/T 38762.3-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 3:Angular sizes
GB/T 38762.1-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 1:Linear sizes

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 39542.2-2020 Mechanical pencils for technical drawings—Part 2:Black leads—Classification and dimensions
GB/T 16675.2-2012 Technical drawings—Simplified representation—Part 2:Dimensioning
GB/T 4983-2003 Vacuum technology—Quick release couplings—Dimensions—Part 2:Screwed type
GB/T 16709-1996 Vacuum technology--Pipeline fittings--Mounting dimensions
GB/T 6070-2007 Vacuum technology - Flange dimensions
GB/T 5343.2-1993 Turning tools with indexable inserts－Types,dimensions and technical specifications
GB/T 15754-1995 Technical drawings - Dimensioning and tolerancing of cones
GB/T 15467-1995 Graphic technology - Sheet - Fed printing machines - Range of sizes
GB/T 4982-2003 Vacuum technology—Quick release couplings—Dimensions—Part 1:Clamped type
GB/T 20233-2006 Micrographics - A6 size aperture cards
GB/T 16675.2-1996 Technical drawings - Simplified representation - Part 2: Dimensioning
GB/T 39011.2-2020 Mechanical pencils for technical drawings—Part 2:Black leads—Classification and dimensions
GB 8897.2-2005 Primary batteries―Part 2:Physical and technological specifications

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2487-2015 Technical Specifications for Mesoscale Convective Synoptic Analysis

未注明发布机构

DIN EN ISO 5457:1999 Technical product documentation - Sizes and layout of drawing sheets
ISO DIS 129-2:2013 Technical product documentation — Indication of dimensions and tolerances — Part 2: Dimensioning of mechanical engineering drawings
DIN 874-2:1973 Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges; Dimensions, technical delivery conditions
DIN 68150-1 E:2015-12 Wooden dowels; dimensions, specifications
DIN 824:1956 Technical drawings; Folding to filing size
DIN 5130 E:2012-10 Copper hammers - Dimensions and technical specifications
DIN ISO 3040:1978-04 Technical drawings; dimensioning and tolerancing; cones
DIN 509 E:2020-02 Technical drawings - Relief grooves - Types and dimensions
DIN EN ISO 14405-2 E:2018-09 Technical Product Specification (GPS) Dimensional Tolerances Part 2: Dimensions other than Linear Dimensions (Draft)
DIN 874-1:1973 Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions
DIN 509 Technical drawings - Relief grooves - Types and dimensions
DIN 509:2022-03 Technical drawings - Relief grooves - Types and dimensions
DIN 855 E:2019-06 Semi-circular profile milling cutters, concave - Dimensions and technical specifications
DIN 509:1966 Technical drawings - Relief grooves - Types and dimensions
DIN 847 E:2019-06 Double equal-angle milling cutters - Dimensions and technical delivery conditions
DIN EN ISO 1938-1 E:2011-08 Geometric Product Specification (GPS) Dimensional Measuring Equipment Part 1: Planar Limit Gauges for Linear Dimensions (Draft)
DIN 855:1926 Semi-circular profile milling cutters, concave - Dimensions and technical specifications
DIN 856:1926 Convex milling cutters - Dimensions and technical delivery conditions
YY 91066-1999 Small octagonal handle dimensions and technical conditions
DIN 856 E:2019-07 Convex milling cutters - Dimensions and technical delivery conditions
DIN 509:2022-12 Technical drawings - Relief grooves - Types and dimensions

Professional Standard - Medicine

YY/T 91066-1999 Small octagonal shank-Sizes and specifications

Professional Standard - Machinery

JB/T 1308.4-1999 Type, dimensions and specifications of PN 250 MPa necked joints
JB/T 1308.9-1999 Type, dimensions and specifications of PN 250 MPa joints nuts
JB/T 1308.13-1999 Type, dimensions and specifications of PN 250 MPa flanges
JB/T 1308.16-1999 Type, dimensions and specifications of PN 250 MPa nuts
JB/T 1308.14-1999 Type, dimensions and specifications of PN 250 MPa stud bolts
JB/T 1308.3-1999 Type, dimensions and specifications of PN 250 MPa pipe ends
JB/T 1308.11-1999 Type, dimensions and specifications of PN 250 MPa inner and outer nuts
JB/T 1308.18-1999 Type, dimensions and specifications of PN 250 MPa reduced joints
JB/T 1308.8-1999 Type, dimensions and specifications of PN 250 MPa irmer and ontes nuts
JB/T 1308.17-1999 Type, dimensions and specifications of PN 250 MPa reduced pipes
JB/T 1308.10-1999 Type, dimensions and specifications of PN 250 MPa outers nuts
JB/T 1308.5-1999 Type, dimensions and specifications of PN 250 MPa socket joints
JB/T 1308.21-1999 Type, dimensions and specifications of PN 250 MPa elbows
JB/T 1308.7-1999 Type, dimensions and specifications of PN 250 MPa threaded collars
JB/T 1308.12-1999 Types，dimensions and specifications of PN250 MPa positioning rings

Group Standards of the People's Republic of China

T/CECS 962-2021 Technical specification for the application of super-large glass curtain wall
T/CECS 1044-2022 Technical standards for large-scale 3D printing of polymer composite materials

Professional Standard - Railway

TB/T 1755-1986 Dimension Parameter and Technical Specification for Seats in Hard-seat Car

Professional Standard - Electron

SJ/Z 3206.6-1989 Shapes and dimensions of graphite electrode for emision spectrum

Professional Standard - Textile

FZ/T 90089.1-2021 Textile machinery nameplate—Part 1:Types,dimensions and specifications

Professional Standard - Aviation

HB 6470-1990 Dimensional tolerances and technical conditions of aircraft sheet metal parts

中华人民共和国国家卫生和计划生育委员会

GB/T 3976-2014 Functional sizes and technical requirements of chairs and tables for educational institutions

AENOR

UNE 32204:2012 Coke. Size analysis.
UNE 32104:1990 HARD COAL. SIZE ANALYSIS.
UNE 56918:1990 GRANULATED CORK. SIZE ANALISYS BY MECHANICAL SIEVING.
UNE 1120:1996 TECHNICAL DRAWINGS. TOLERANCING OF LINEAR AND ANGULAR DIMENSIONS.

SCC

UNE 32204:1990 COKE. SIZE ANALYSIS.
AS 1038.18:1981 Coal and coke - Analysis and testing - Size analysis of coke
NS 1434:1986 Technical drawings - Dimensioning and tolerancing of profiles
BS ISO 3040:1990 Technical drawings. Dimensioning and tolerancing. Cones
CAN/CSA-B78.2-M91-1991(C2002) Dimensions and tolerancing in technical drawing
DIN 5130 E:2012 Draft Document - Copper hammers - Dimensions and technical specifications
UNE 1122:1996 TECHNICAL DRAWINGS. DIMENSIONING AND TOLERANCING. CONES
CAN/CSA-B78.2-M91-1991(R2002) Dimensioning and Tolerancing of Technical Drawings
07/30137964 DC BS ISO 12635. Graphic technology. Plates for offset. Dimensions
CAN/CSA B78.2-M91-1991(R2002) Dimensioning and Tolerancing of Technical Drawings
NS-EN 12324-1:1998 Irrigation techniques — Reel machine systems — Part 1: Size series
DANSK DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
CAN/CSA-B78.2-1986 Dimensioning and Tolerancing of Technical Drawings
DANSK DS/EN 12324-1:1999 Irrigation techniques - Reel machine systems - Part 1: Size series
CAN2-38.103-1974 Gown, Operating Surgical - Dimensions
AENOR UNE 54024:1998 Graphic technology. Sheet printing machines. Size ranges.
DIN 327:2024 Parallel shank slot drills - Dimensions and technical delivery conditions
DANSK DS/ISO 9177-2:2022 Mechanical pencils for technical drawings – Part 2: Black leads – Classification and dimensions
BS PD ISO/IEC TR 14143-3:2003 Information technology. Software measurement. Functional size measurement-Verification of functional size measurement methods
NS-ISO 10579:1993 Technical drawings — Dimensioning and tolerancing — Non-rigid parts
10/30230006 DC BS EN 15415-3. Solid recovered fuels. Determination of particle size distribution . Part 3. Method by image analysis for large dimension particles
NS-EN ISO 1660:1995 Technical drawings — Dimensioning and tolerancing of profiles (ISO 1660:1987)
BS ISO 10579:1993 Technical drawings. Dimensioning and tolerancing. Non-rigid parts
UNE-EN ISO 1660:1996 TECHNICAL DRAWINGS. DIMENSIONING AND TOLERANCING OF PROFILES. (ISO 1660:1987).
UNE 54024:1998 GRAPHIC TECHNOLOGY. SHEET-FED PRINTING MACHINES. RANGE OF SIZEX.
DIN 856 E:2019 Draft Document - Convex milling cutters - Dimensions and technical delivery conditions
DANSK DS/EN ISO 5457/A1:2010 Technical product documentation - Sizes and layout of drawing sheets
VDI/VDE 2630 BLATT 1.4-2010 Computed tomography in dimensional measurement technology — comparison of different dimensional measurement methods
10/30232150 DC BS ISO 129-4. Technical product documentation (TPD). Indication of dimensions and tolerances. Part 4. Dimensioning for shipbuilding drawings
BS EN ISO 5457:1999 Technical product documentation. Sizes and layout of drawing sheets
BS ISO 406:1987 Technical drawings. Tolerancing of linear and angular dimensions

TR-TSE

TS 1726-1974 HARD COALS - S?ZE ANALYSIS
TS 2087-1975 VAOUUM TECHNOLOGY - QU1CK - RELEASE COUPL1NGS DIMENS?ONS
TS 2318-1976 TECHNICAL DRAWINGS DIMENSIONING AND TOLERANCING CONES

GSO

GSO ISO 2325:2013 Coke - Size analysis (Nominal top size 20 mm or less)
OS GSO ISO 7532:1994 INSTANT COFFEE — SIZE ANALYSIS
BH GSO ISO 2325:2016 Coke - Size analysis (Nominal top size 20 mm or less)
GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
OS GSO ISO 1609:2015 Vacuum technology -- Flange dimensions
GSO ISO 1609:2015 Vacuum technology -- Flange dimensions
GSO ISO 14405-2:2024 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
OS GSO ISO 12635:2015 Graphic technology -- Plates for offset printing -- Dimensions
BH GSO ISO 12635:2017 Graphic technology -- Plates for offset printing -- Dimensions
GSO ISO 12635:2015 Graphic technology -- Plates for offset printing -- Dimensions
OS GSO ISO 5457:1994 TECHNICAL DRAWINGS - SIZES AND LAYOUT OF DRAWING SHEETS
BH GSO ISO 1660:2017 Technical drawings -- Dimensioning and tolerancing of profiles
OS GSO ISO 1660:2015 Technical drawings -- Dimensioning and tolerancing of profiles
BH GSO ISO 2030:2017 Granulated cork -- Size analysis by mechanical sieving
OS GSO ISO 2030:2015 Granulated cork -- Size analysis by mechanical sieving
OS GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
GSO ISO 1660:2015 Technical drawings -- Dimensioning and tolerancing of profiles
BH GSO ISO 129-4:2017 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
OS GSO ISO/IEC TR 14143-3:2017 Information technology -- Software measurement -- Functional size measurement -- Part 3: Verification of functional size measurement methods
GSO ISO/IEC TR 14143-3:2017 Information technology -- Software measurement -- Functional size measurement -- Part 3: Verification of functional size measurement methods
GSO ISO 5457:1994 TECHNICAL DRAWINGS - SIZES AND LAYOUT OF DRAWING SHEETS
OS GSO ISO 2861:2015 Vacuum technology -- Dimensions of clamped-type quick-release couplings
GSO ISO 15786:2013 Technical drawings -- Simplified representation and dimensioning of holes
GSO ISO 13444:2015 Technical product documentation (TPD) -- Dimensioning and indication of knurling
GSO ISO 4150:2015 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving
BH GSO ISO 2861:2017 Vacuum technology -- Dimensions of clamped-type quick-release couplings
OS GSO ISO 4150:2015 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving
BH GSO ISO 4150:2017 Green coffee or raw coffee -- Size analysis -- Manual and machine sieving
GSO ISO/TS 3669-2:2015 Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges
BH GSO ISO/TS 3669-2:2017 Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges
GSO ISO 129-1:2013 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles
GSO 1725:2005 Testing aggregates – Determination of aggregates size and particles shape – part 1 = sieve analysis

Korean Agency for Technology and Standards (KATS)

KS H ISO 7532-2007 Instant coffee－Size analysis
KS D 0046-2014(2019) Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-1987 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2019 Methods of sampling for size analysis of ferroalloys and size determination
KS D 0046-2014 Methods of sampling for size analysis of ferroalloys and size determination
KS B ISO 1609-2008(2018) Vacuum technology－Flange dimensions
KS B ISO 1609-2023 Vacuum technology－Flange dimensions
KS M ISO 2030:2020 Granulated cork — Size analysis by mechanical sieving
KS X ISO 12635-2006(2021) Graphic technology－Plates for offset printing－Dimensions
KS B ISO 406:2006 Technical drawings-Tolerancing of linear and angular dimensions
KS X ISO 12635:2006 Graphic technology-Plates for offset printing-Dimensions
KS B ISO 1609:2008 Vacuum technology－Flange dimensions
KS X ISO 12635-2006(2016) Graphic technology－Plates for offset printing－Dimensions
KS B ISO 3669-2008(2018) Vacuum technology－Bakable flanges－Dimensions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS L 2302-2012 Shape and dimension of glass apparatus for chemical analysis
KS L 2302-1987 Shape and dimension of glass apparatus for chemical analysis
KS X ISO 12635:2021 Graphic technology — Plates for offset printing — Dimensions
KS B ISO 3669-2023 Vacuum technology－Bakable flanges－Dimensions
KS B ISO 9803:2008 Vacuum technology-Pipeline fittings-Mounting dimensions
KS A 0106-2001(2011) Technical drawings－Sizes and layout of drawing sheets
KS B ISO 9803:2013 Vacuum technology－Pipeline fittings－Mounting dimensions
KS B ISO 9803-2013 Vacuum technology－Pipeline fittings－Mounting dimensions
KS L 2302-2022 Shape and dimension of glass apparatus for chemical analysis
KS X ISO/IEC TR 14143-3-2020 Information technology－Software measurement ? Functional size measurement－Part 3：Verification of functional size measurement methods
KS L 2302-2017(2022) Shape and dimension of glass apparatus for chemical analysis
KS X ISO/IEC TR 14143-3:2005 Information technology-Software measurement ? Functional size measurement-Part 3:Verification of functional size measurement methods
KS A 0108-2001(2011) Technical drawings－Tolerancing of linear and angular dimensions
KS B ISO 2861-1-2013 Vacuum technology－Quick-release couplings－Dimension－Part 1：Clamped type
KS A ISO 1660:2002 Technical drawings-Dimensioning and tolerancing of profiles
KS X ISO 10549:2007 Micrographics－A6 size aperture cards
KS B ISO 3669:2008 Vacuum technology－Bakable flanges－Dimensions
KS A ISO 1660:2014 Technical drawings — Dimensioning and tolerancing of profiles
KS X ISO/IEC TR 14143-3-2005(2020) Information technology－Software measurement?Functional size measurement－Part 3：Verification of functional size measurement methods
KS X ISO/IEC TR 14143-5:2005 Information technology-Software measurement-Functional size measurement-Part 5:Determination of functional domains for use with functional size measurement
KS B ISO 2861-1:2008 Vacuum technology-Quick-release couplings-Dimension-Part 1:Clamped type
KS B ISO 2861-2:2013 Vacuum technology-Quick release couplings-Dimensions-Part 2:Screwed type
KS M 0124-2017 Technical terms for analytical chemistry(Analytical instrument part)
KS B ISO 2861-2:2008 Vacuum technology-Quick release couplings-Dimensions-Part 2:Screwed type
KS B ISO 406-2006(2011) Technical drawings－Tolerancing of linear and angular dimensions
KS M 0124-2017(2022) Technical terms for analytical chemistry(Analytical instrument part)
KS B ISO 2861-1:2013 Vacuum technology－Quick-release couplings－Dimension－Part 1：Clamped type
KS X ISO/IEC TR 14143-5-2005(2020) Information technology－Software measurement－Functional size measurement－Part 5：Determination of functional domains for use with functional size measurement
KS B ISO 5457:2019 Technical product documentation — Sizes and layout of drawing sheets
KS A 0108-2013 Technical drawings－Tolerancing of linear and angular dimensions
KS B ISO 5457:2014 Technical product documentation — Sizes and layout of drawing sheets
KS B ISO 5457:2011 Technical product documentation-Sizes and layout of drawing sheets
KS A ISO 1012-2002(2022) Photography－Films in sheets and rolls for general use－Dimensions

PL-PKN

PN N01612-1980 Technical drawings. Sizes
PN BN 3782-05-1962 Chain box. Technical requirements and dimensions
PN M01142-1988 Technical drawing. Dimensining. Fundamental tolerancing principle

International Organization for Standardization (ISO)

ISO 732:1991 Photography; film dimensions; 120 and 220 sizes
ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
ISO 1609:1986 Vacuum technology; Flange dimensions
ISO 6407:1992 Photography; film dimensions; graphic arts
ISO 3669:2020 Vacuum technology — Dimensions of knife-edge flanges
ISO 12635:1996 Graphic technology - Plates for offset printing - Dimensions
ISO 12635:2008 Graphic technology - Plates for offset printing - Dimensions
ISO 12635:2021 Graphic technology - Plates for offset printing - Dimensions
ISO 3029:1975 Title missing - Legacy paper document
ISO 2030:1976 Cork — Granulated cork — Size analysis by mechanical sieving
ISO 1660:1982 Technical drawings — Dimensioning and tolerancing of profiles
ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges
ISO 7261:1987 Photography; 110-size cartridges; Dimensions
ISO 3029:1995 Photography - 126-size cartridges - Dimensions of cartridge, film and backing paper
ISO 5457:1980 Technical drawings; Sizes and layout of drawing sheets
ISO 9803:1993 Vacuum technology; pipeline fittings; mounting dimensions
ISO 3669:1986 Vacuum technology; Bakable flanges; Dimensions
ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
ISO 129-5:2018 Technical product documentation - Indication of dimensions and tolerances- Part 5:Dimensioning of structural metal work
ISO 10549:2000 Micrographics - A6 size aperture cards
ISO 2861-1:1974 Vacuum technology; Quick-release couplings; Dimensions; Part I : Clamped type
ISO 2861-2:1980 Vacuum technology; Quick release couplings; Dimensions; Part 2 : Screwed type
ISO 4090:1982 Photography — Film for medical radiography — Sizes, quantity packaging and labelling
ISO/IEC TR 14143-3:2003 Information technology - Software measurement; Functional size measurement - Part 3: Verification of functional size measurement methods
ISO 1660:1987 Technical drawings; Dimensioning and tolerancing of profiles
ISO 3040:1974 Technical drawings — Dimensioning and tolerancing cones
ISO 1012:1991 Photography; film dimensions; pictorial sheets
ISO 4090:1991 Photography; film dimensions; medical radiography
ISO 1010:1973 Photography — Colour paper for general use — Sizes of sheet material
ISO 3040:1990 Technical drawings; dimensioning and tolerancing; cones
ISO 2861:2020 Vacuum technology — Dimensions of clamped-type quick-release couplings
ISO 3872:1976 Graphic technology; Sheet-fed printing machines; Range of sizes
ISO 5457:1999 Technical product documentation - Sizes and layout of drawing sheets
ISO 1009:1992 Photography; paper dimensions; rolls for printers
ISO 337:1981/cor 1:1990 Road vehicles; 50 semi-trailer fifth wheel coupling pin; basic and mounting/interchangeability dimensions; technical corrigendum 1
ISO 11312:1993 Photography; film dimensions; film for electronic scanner use
ISO 10579:1993 Technical drawings; dimensioning and tolerancing; non-rigid parts
ISO/IEC TR 14143-5:2004 Information technology — Software measurement — Functional size measurement — Part 5: Determination of functional domains for use with functional size measurement
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: ? limit specifications - Step dimensions, distances, angular sizes and radii

CZ-CSN

CSN 70 4082-1973 Analytical funnels. Shape and dimensions.
CSN 44 1342-1993 Coke. Size analysis. Nominal top size greater than 10 mm.
CSN 01 3110-1976 Technical drawings. Sizes of drawings
CSN 01 3823-1984 Reprography. Resolution test charts. Dimensions and technical requirements
CSN 63 1030-1987 Flaps. Dimonsions anfl tcohnieal re- quiroments
CSN 25 3741-1976 Knife straightedges sizes. Technical specifications
CSN 25 5103-1986 Inspection squares 90 [degree] Types. Fundamental dimensions. Technical requirements
CSN 63 0100-1978 Dimensional tolerances of technical rubber goods
CSN 16 0120-1976 Metallie oylindrieal barrels. Dimensions and technical requirements
CSN 49 2108-1993 Worked coniferous dimension stock for transport means. Technical requirements. Dimensions
CSN 30 0026-1979 Basic terms of road vehicles. Vehicle dimensions. Terms and definitions
CSN 30 3704-1983 Wheels of road vehicles. Tapes for measuring rims circumferences. Technical requirements and dimensions
CSN ISO 5457:1994 Technical drawings.Sizes and layout of drawing sheets
CSN 25 7631-1986 Butyrometers for milk. Dlmensions and technical requirements
CSN 25 7634-1986 Cheese butyrometers. Dimensions and echnical requirements
CSN 36 8454-1984 Reels for videotape 12,7 mm wide. Dimensions. Technical requirements
CSN 91 4115-1982 Metal sanitary-technical equipment. Basic dimensions.
CSN 01 3130-1995 Technical drawings. Dimensioning. General principles
CSN 49 1520-1974 Rough coniferoas dimension stocks. Teohnical requiremen?s
CSN ISO 3040:1994 Technical drawings. Dimension and tolerancing. Cones
CSN 02 2039-1992 Two-part rivets. Technical delivery code and dimensions
CSN 02 2815-1961 Nail for marking of wooden sleepers. Dimensions, technical conditions
CSN ISO 406:1994 Technical drawings. Tolerancing of linear and angular dimensions
CSN 05 4246-1978 Hose oonnections. Dimensions and tschnical and delivery regulations
CSN 70 4082-1996 Laboratory glassware. Analytical funnels. Shape and dimension
CSN 81 2110-1989 Warp winding machines. Basic parameters, dimensions and technical requirements
CSN 01 3113-1982 Technical drawings Lay-out of drawing sjzes
CSN 81 9402-1988 Ironing presses. Basic dimensions, technical requirements and íesting

ESDU - Engineering Sciences Data Unit

ESDU 96024 A-1996 Example of statistical techniques applied to analysis of paved runway sizes (Bivariate Normal Distribution).

KR-KS

KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 1609-2008(2023) Vacuum technology－Flange dimensions
KS M ISO 2030-2020 Granulated cork — Size analysis by mechanical sieving
KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS X ISO 12635-2021 Graphic technology — Plates for offset printing — Dimensions
KS B ISO 9803-2008 Vacuum technology－Pipeline fittings－Mounting dimensions
KS B ISO 3669-2008(2023) Vacuum technology－Bakable flanges－Dimensions
KS B ISO 2861-1-2008 Vacuum technology－Quick-release couplings－Dimension－Part 1：Clamped type
KS B ISO 2861-2-2008 Vacuum technology－Quick release couplings－Dimensions－Part 2：Screwed type
KS A ISO 1039-2003(2023) Cinematography -- Cores for motion-picture and magnetic film rolls -- Dimensions
KS B ISO 5457-2019 Technical product documentation — Sizes and layout of drawing sheets

Association Francaise de Normalisation

NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
NF E04-563-1*NF EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
NF E75-100*NF ISO 6344-1:2001 Coated abrasives - Grain size analysis - Part1 : grain size distribution test.
NF E29-721:2015 Vacuum technology - Flanges dimensions
NF X50-103:2020 Value management - Technical functional analysis - Coding of technical functions into a single limit condition on a geometrical or dimensional characteristic
NF Q75-751:1987 Technologie graphique - Dimensions principales des écritures modulaires
NF E04-557:1991 Technical drawings. Dimensioning tolerancing. Cones.
NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
NF E29-723:1974 Vacuum technology high vacuum collars. Dimensions.
NF E04-556:1995 Technical drawings. Dimensioning and tolerancing of profiles.
NF E29-729:1979 Vacuum technology - Bakeable flanges - Dimensions
NF E75-101:2001 Coated abrasives - Grain size analysis - Part 2 : determination of grain size distribution of macrogrits P12 to P220.
NF E29-721:1974 Vacuum technology. High vacuum flanges. Dimensions.
NF E29-726:1974 Vacuum technology. Steel tubes for vacuum pipes. Dimensions.
NF EN 12324-1:1999 Techniques d'irrigation - Installations avec enrouleurs - Partie 1 : gammes dimensionnelles.
NF E04-550:1983 TECHNICAL DRAWING. FUNCTIONAL DIMENSIONING AND TOLERANCING.
NF E04-565:1994 Technical drawings - Dimensioning and tolerancing - Non-rigid parts.

IN-BIS

IS 6076-1990 Vacuum technology – flange dimensions
IS 10718-1993 Technical drawings - dimensions and tolerancing of cones
IS 437-1979 Dimensional analysis of coal and coke for sale

European Committee for Standardization (CEN)

EN ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN 12324-1:1998 Irrigation techniques - Reel machine systems - Part 1: Size series
EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts

IT-UNI

UNI 3967-1961 Technical drawings. size scale
UNI 3974-1989 Technical drawings. Size selection method
UNI ISO 1609:2020 Vacuum technology -- Dimensions of non-knife edge flanges
UNI ISO 3669:2020 Vacuum technology - Dimensions of knife-edge flanges
UNI 7263-1973 X-ray analysis uses rubber to seal the radioactive source. size
UNI 3973-1989 Technical drawings. Dimension selection, measurement lines and reference lines, standards for dimension marking
UNI 3975-1989 Technical drawings. Special conventions for size selection
UNI ISO 2861:2020 Vacuum technology -- Dimensions of clamped-type quick-release couplings

RO-ASRO

STAS SR ISO 1609:1995 Vacuum technology. Flange dimensions
STAS 2890-1988 Casting technologv MOt'I.DING BOXKS Dimcnsions
STAS 11061-1988 MEAT PRODUCTS Sensorial analysis and dimensions checking up
STAS 2761-1987 Fouiuling technology FOUXIWY l.A])LES Dimcnsions
STAS 5917-1985 Technical leathcr items DRIVING BELTS Dimensions
STAS SR ISO 8130-1:1994 Coating powders - Part 1: Determination of partide size distribution by sieving

German Institute for Standardization

DIN 28404:1986 Vacuum technology; flanges; dimensions
DIN 5130:2014 Copper hammers - Dimensions and technical specifications
DIN 5130:2014-01 Copper hammers - Dimensions and technical specifications
DIN 874-1:2003 Geometrical Product Specifications (GPS) - Straight edges - Part 1: Steel straight edges; Dimensions, technical delivery conditions
DIN 874-3:2008 Geometrical product specifications (GPS) - Straight edges - Part 3: Granite straight edges; dimensions, technical delivery conditions
DIN 68150-1:1989 Wooden dowels; dimensions, specifications
DIN 68150-1:2016 Wooden dowels - Dimensions, specifications
DIN 16521:1999 Printing technology - Rules in typesetting - Measures
DIN 406-12:1992 Engineering drawing practice; dimensioning; tolerancing of linear and angular dimensions (modified version of ISO 406:1987)
DIN 24337:1981 Fluid power; rod and plain eyes; connecting dimensions
DIN 874-2:2003 Geometrical Product Specifications (GPS) - Straight edges - Part 2: Knife edge straight edges; Dimensions, technical delivery conditions
DIN 824:1981-03 Technical drawings; Folding to filing size
DIN ISO 3040:1991 Technical drawings; dimensioning and tolerancing; cones; identical with ISO 3040:1990
DIN 16507-1:1998-09 Printing technology - Typesizes - Part 1: Hot metal type setting and related techniques
DIN 24550-1:2006 Fluid power - Hydraulic filters - Part 1: Definitions, nominal pressures, nominal sizes, fitting dimensions
DIN 509:2006 Technical drawings - Relief grooves - Types and dimensions
DIN 856:2020 Convex milling cutters - Dimensions and technical delivery conditions
DIN EN 12324-1:1999-02 Irrigation technic - Reel machine systems - Part 1: Size series; German version EN 12324-1:1998
DIN 19052-1:1979 Microfilming of engineering drawings on microfilm 35 mm; technical proceeding, dimensions
DIN 856:2020-11 Convex milling cutters - Dimensions and technical delivery conditions
DIN ISO 1660:1988 Technical drawings; dimensioning and tolerancing of profiles; identical with ISO 1660:1987
DIN 885:2021-02 Side and face milling cutters - Dimensions and technical delivery conditions
DIN 847:2020-11 Double equal-angle milling cutters - Dimensions and technical delivery conditions
DIN 855:2020-11 Semi-circular profile milling cutters, concave - Dimensions and technical specifications
DIN 847:2020 Double equal-angle milling cutters - Dimensions and technical delivery conditions
DIN 327:2023-04 Parallel shank slot drills - Dimensions and technical delivery conditions / Note: Date of issue 2023-03-24*Intended as replacement for DIN 327-1 (1989-04), DIN 327-2 (1990-04).
DIN EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011); German version EN ISO 14405-2:2011
DIN 2137-1:2020-11 Double equal-angle milling cutters - Dimensions and technical delivery conditions
DIN 855:2020 Semi-circular profile milling cutters, concave - Dimensions and technical specifications
DIN ISO 6284:1997 Construction drawings - Indication of limit deviations (ISO 6284:1996)
DIN EN ISO 5457:2017-10 Technical product documentation - Sizes and layout of drawing sheets (ISO 5457:1999 + Amd. 1:2010); German version EN ISO 5457:1999 + A1:2010

Japanese Industrial Standards Committee (JISC)

JIS B 2290:1998 Vacuum technology -- Flange dimensions
JIS B 0420-1:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
JIS B 2294:2022 Vacuum technology -- Dimensions of knife-edge flanges
JIS Z 8317:1984 Technical drawing -- Dimensioning
JIS Z 8318:1984 Technical drawing -- Tolerancing of linear and angular dimensions
JIS Z 8311:1995 Technical drawing -- Sizes and format of drawings
JIS Z 8311:1998 Technical drawings -- Sizes and layout of drawing sheets
JIS B 2293:2000 Vacuum technology -- Pipeline fittings -- Mounting dimensions
JIS B 0028:2000 Technical drawings -- Dimensioning and tolerancing -- Cones
JIS B 0026:1998 Technical drawings -- Dimensioning and tolerancing -- Non-rigid parts
JIS B 0027:2000 Technical drawings -- Dimensioning and tolerancing of profiles
JIS B 0060-4:2017 Digital technical product documentation (DTPD) -- Part 4: Indication of annotation for 3D annotated model -- Dimensions and dimensional tolerances

CEN - European Committee for Standardization

EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes

AT-ON

ONORM A 6065-5-1992 Technical drawings — Dimensioning for general application — Dimensioning by coordinates
ONORM ISO 1660:1989 Technical drawings; dimensioning and tolerancing of profiles
ONORM ISO 3040:1992 Technical drawings - Dimensioning and tolerancing - Cones
ONORM K 1105-1998 Wheelchairs - Terminology, Classification and dimensions
ONORM M 2065-1982 Hydraulics ; Technical specifications for dimensioning of hydraulic equipment

British Standards Institution (BSI)

BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
BS 1016-110.2:1996 Methods for analysis and testing of coal and coke. Size analysis of coke. Nominal top size 20 mm or less
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
BS ISO 12635:2009 Graphic technology. Plates for offset printing. Dimensions
BS ISO 12635:2008 Graphic technology - Plates for offset printing - Dimensions
BS ISO 3669:2020 Vacuum technology. Dimensions of knife-edge flanges
BS 1016-110.1:1996 Methods for analysis and testing of coal and coke - Size analysis of coke - Nominal top size greater than 20 mm
BS ISO 1609:2020 Vacuum technology. Dimensions of non-knife edge flanges
20/30397448 DC BS ISO 728. Coke. Size analysis by sieving
BS ISO 732:2001 Photography. 120-size and 220-size films. Dimensions
BS ISO 732:1995 Photography. Film dimensions. 120 and 220 sizes
BS EN 12324-1:1999 Irrigation techniques - Reel machine systems - Size series
BS ISO 1008:1995 Photography. Paper dimensions. Pictorial sheets
BS ISO 1008:1992 Photography - Paper dimensions - Pictorial sheets
BS ISO 3040:2000 Technical drawings - Dimensioning and tolerancing - Cones
BS ISO 406:2000 Technical drawings - Tolerancing of linear and angular dimensions
BS ISO 14546:2001 Photography. Aerial films and spools. Dimensions
BS ISO 2861:2020 Vacuum technology. Dimensions of clamped-type quick-release couplings
BS ISO 129-4:2013 Technical product documentation (TPD). Indication of dimensions and tolerances. Dimensioning of shipbuilding drawings
BS ISO 14546:2000 Photography - Aerial films and spools - Dimensions
BS ISO 2861:2013 Vacuum technology. Dimensions of clamped-type quick-release couplings
PD ISO/IEC TR 14143-3:2003 Information technology. Software measurement. Functional size measurement. Verification of functional size measurement methods
BS ISO 129-5:2018 Technical product documentation. Indication of dimensions and tolerances - Dimensioning of structural metal work
BS ISO 4150:2011 Green coffee or raw coffee. Size analysis. Manual and machine sieving
BS ISO 1009:2001 Photography. Paper dimensions. Rolls for printers
BS EN ISO 5457:1999+A1:2010 Technical product documentation. Sizes and layout of drawing sheets
BS ISO 732:2000 Photography - 120-size and 220-size films - Dimensions
BS EN ISO 1660:1996 Technical drawings - Dimensioning and tolerancing of profiles
BS EN ISO 13383-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Microstructural characterization. Determination of grain size and size distribution
13/30240527 DC BS ISO 129-2. Technical product documentation. Indication of dimensions and tolerances. Part 2. Dimensioning of mechanical engineering drawings
BS ISO 1009:2000 Photography - Paper dimensions - Rolls for printers
BS ISO 1009:1995 Photography. Paper dimensions. Rolls for printers

Danish Standards Foundation

DS/ISO 1953:1995 Hard coal - Size analysis by sieving
DS/EN ISO 1660:1996 Technical drawings - Dimensioning and tolerancing of profiles
DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
DS/ISO 3040:1992 Technical drawings. Dimensioning and tolerancing. Cones
DS/EN 12324-1:1999 Irrigation techniques - Reel machine systems - Part 1: Size series
DS/ISO 5457:1982 Technical drawings. Sizes and layout of drawing sheets
DS/ISO 1660:1990 Technical drawings. Dimensioning and tolerancing of profiles
DS/ISO 10579:1993 Technical drawings. Dimensioning and tolerancing. Non-rigid parts
DS/EN ISO 5457/A1:2010 Technical product documentation - Sizes and layout of drawing sheets
DS/EN ISO 5457:1999 Technical product documentation - Sizes and layout of drawing sheets

CU-NC

NC 02-01-1967 Size for drawings and technical documents
NC 15-48-1986 Cool Technique. Refrigerating Chambers. Main Parameters and Dinensions

American Society for Testing and Materials (ASTM)

ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE DA-07-044-2007 Analysis of Airflow in a Full-Scale Room with Non-Isothermal Jet Ventilation Using PTV Techniques

HU-MSZT

MSZ 20164-1988 Statistical analysis of dimensional accuracy in the construction industry
MSZ 7873-1971 Rotary bearing dimensions and technical requirements
MSZ 11-1969 Technical drawing. Mechanical drawing. size return
MSZ 13-1971 Technical drawing. Mechanical drawing. Dimensional network construction

Standard Association of Australia （SAA）

AS 1038.18:1996 Coal and coke - Analysis and testing Part 18: Coke - Size analysis
AS/NZS ISO/IEC 14143.3:2004 Information technology - Software measurement - Functional size measurement - Verification of functional size measurement methods

GOST

GOST 34984-2023 Vacuum technology. Dimensions of knife-edge flanges
GOST 34983-2023 Vacuum technology. Dimensions of non-knife edge flanges
GOST R 70055-2022 Small-sized wheelchairs.General specifications

ZA-SANS

SANS 1953:1994 Hard coal - Size analysis by sieving
SANS 14143-3:2004 Information technology - Software measurement - Functional size measurement Part 3: Verification of functional size measurement methods

VN-TCVN

TCVN 130-1977 Lock washers.Dimension and technical requirements
TCVN 7583-1-2006 Technical drawings.Indication of dimensions and tolerances.Part 1: General principles
TCVN 260-2008 Geometrical Product Specifications(GPS).Linear and angular dimensioning and tolerancing:+/- limit specifications.Step dimensions,distances,angular sizes and radii
TCVN 7285-2003 Technical product documentation.Sizes and layout of drawing sheets

SE-SIS

SIS SS-ISO 3040:1992 Technical drawings — Dimensioning and tolerancing — Cones
SIS SS-ISO 1660:1989 Technical drawings — Dimensioning and tolerancing of profiles
SIS SS-ISO 5457:1991 Technical drawings — Sizes and layout of drawing sheets
SIS SS-ISO 406:1989 Technical drawings — Tolerancing of linear and angular dimensions
SIS SS-ISO 5457:1983 Technical drawings - Sizes and layout of drawing sheets
SIS SS 1918-1979 Technical drawings — Dimensioning of coated parts

RU-GOST R

GOST 25306-1982 Plane blades for plates shears. Basic and connecting dimensions. Technical requirements
GOST 23827-1979 Thin wood raw material. Specifications
GOST 20131-1980 Pattern plates. Types. Basic dimensions. Specifications
GOST ISO 3669-2014 Vacuum technology. Bakable flanges. Dimensions
GOST 14162-1979 Steel tubes of small dimensions (capillary). Specifications
GOST 18386-1973 Riggin assemblies. Connecting dimensions and technical requirements
GOST 28121-1989 Spiral classificators. Types, basic parameters, dimensions and specifications
GOST 28116-1989 Catering equipment distribution containers. Main and join dimensions and technical requirements
GOST 28116-1995 Catering equipment. Distribution containers. Main and joint dimensions and technical requirements
GOST 27043-1986 Cubicles for thyristor electric drives. Classification, overall dimensions, and specifications
GOST 19445-1993 Mechanical pencils. Part 1. Classification, dimensions, performance requirements and testing
GOST 19445-1980 Mechanical pencils. General specifications

WRC - Welding Research Council

BULLETIN 464-2001 GUIDELINES FOR SIZING OF VESSELS BY LIMIT ANALYSIS

CH-SNV

VSM 57100-1977 Technical drawing. Size and layout of drawings
SNV 195 822-1970 Technical drawing. Dimensional tolerances and injection methods
SEV 4007-1962 Technical drawing. Tolerances on linear and angular dimensions

American Welding Society (AWS)

WRC 464:2001 Guidelines For Sizing Of Vessels By Limit Analysis

Lithuanian Standards Office

LST EN 12324-1-2000 Irrigation techniques - Reel machine systems - Part 1: Size series

BR-ABNT

ABNT P-NB-91-1965 Brazilian Institute of Technical Specifications, inches in millimeters, tolerance dimensions

YU-JUS

JUS B.F1.003-1982 Azbestos. Azbestospapers. Classification and technical requirements, dimensions and tolerancies
JUS Z.N3.010-1980 Nuckar energy. Technical measures ojprotection. Protection boxes. Type, dimensions and clasiflcation
JUS B.F1.002-1980 Asbestos. Asbestos card board. Classification and technical requirements, dimensions and tolerances

NL-NEN

NEN 379-1980 Technical drawings - Sizes of drawings - Folding and filing
NEN-ISO 10579:1994 Technical drawings.Dimensioning and tolerancing.Non-rigid parts

American National Standards Institute （ANSI)

ANSI E1.24-2012 Entertainment Technology - Dimensional Requirements for Stage Pin Connectors
ANSI E1.24-2006 Entertainment Technology - Dimensional Requirements for Stage Pin Connectors

VDI - Verein Deutscher Ingenieure

VDI/VDE 2630 Blatt 1.4-2008 Computed tomography in dimensional measurement - Measurements procedure and comoarability

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.2.14.2-1995 Solder Powder Particle Size Distribution - Optical Image Analyzer Method

FI-SFS

SFS 5343-1987 Stainless steel pipe diameter PN4. Dimensions and technical delivery conditions

ES-AENOR

UNE 56-857-1990 Technical specifications for wooden doors with door leaves of specific sizes