e+h refrigeration sheet

e+h refrigeration sheet, Total:61 items.

The international standard classification for "e+h refrigeration sheet" includes: Electric filters , Printed circuits and boards .

The Chinese standard classification for "e+h refrigeration sheet" includes: General grippers , Filter and delay line , Printed circuit .

Professional Standard - Aviation

HB 3409-1982 Supporting spacer H＝0.6~2.1mm
HB 3408-1982 Guide block spacer H＝0.6~2.1mm

Professional Standard - Electron

SJ 51518/1-2004 Filters power type LC410 - 9005 - E - E - 1E - B - 3 detail specification for

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 44295-2024 Epoxide woven E-glass prepreg for multilayer printed boards

Professional Standard - Machinery

JB/T 7659.5-1995 Finned heat exchanger for freon refrigeration device
JB/T 4211.8-1996 Molds for Cold-Heading Screws Final Upsetting Punch Pin H Type

Professional Standard - Aerospace

QJ 576-1981 Cold-pressed solder tab

HU-MSZT

MSZ 11092-1958 Refrigerator gasket
MSZ 3451/2-1982 Refrigeration capacity detection disc compression
MSZ 7325-1965 Cold-bent c steel with uneven surface, h>b
MSZ 7326-1965 Cold-bent c-steel with uneven surfaces, h

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 15& 34-2010 Safety Standard for Refrigeration Systems Incorporates ANSI/ASHRAE Standard 15-2007 and Addenda a, b, c, d, e, f, g, h, and i
ASHRAE OR-16-C016-2016 Comprehensive Assessment of Centrifugal Chillers Using Next Generation Refrigerant R1233zd(E)
ASHRAE 15& 34-2013 Safety Standard for Refrigeration Systems Includes ANSI/ASHRAE addenda listed in Appendix H
ASHRAE 15 & 34-2013 Safety Standard for Refrigeration Systems (Includes ANSI/ASHRAE addenda listed in Appendix H)
ASHRAE 15& 34-2007 ANSI/ASHRAE Standard 15-2007 Safety Standard for Refrigeration Systems and ANSI/ASHRAE Standard 34-2007 Designation and Safety Classification of Refrigerants Standard 15 Errata: 10/01/2009, Addenda a, b, c, d, and e, Addenda f& h, Addenda g, and Addenda

SCC

MIL MIL-H-22832B-1972 HEAT INTERCHANGERS, REFRIGERANT 12 (SUPERSEDING MIL-H-22832A)
MIL MIL-DTL-18239E-2000 EARPHONE H-87B/U (SUPERSEDING MIL-E-18239D)
MIL MIL-E-5589C-1973 EARPHONE, (EXTENDED RANGE), H-301/U (SUPERSEDING MIL-E-5589B) (S/S BY MIL-E-5589D)
BS 219:1932 Soft solders (grades a,b,c,d,e,f,g,h,j and k)
MIL MIL-E-18239D-1982 EARPHONE H-87B/U (SUPERSEDING MIL-E-18239C) (S/S BY MIL-DTL-18239E)
MIL MIL-PRF-25670/2C-1997 EARPHONE ELEMENT, HIGH-AND LOW-ALTITUDE, H-143/AIC, AND LOW-ALTITUDE, WATER-IMMERSIBLE, H-143A/AIC (SUPERSEDING MIL-E-25670/2B)
MIL MIL-H-44298-1987 HAM SLICES IN BRINE, THERMOSTABILIZED, TRAY PACK(S/S BY MIL-H-44298A)(SUPERSEDING PP-H-002127A)
MIL MIL-H-44298A-1990 HAM SLICES IN BRINE, THERMOSTABILIZED, TRAY PACK(S/S BY MIL-H-44298B)(SUPERSEDING MIL-H-44298)

PL-PKN

PN C94153-53-1987 Rubber vulcanized for technical articles Rubber vulcanized type E class H

RO-ASRO

STAS 11405-1980 Additived hydraulic oils OILS H 9 E P OIL
STAS 6933-1964 Refrigeration equipment. Gate type is C, D, E type Pn 25kgf/cm2 faucet

Defense Logistics Agency

DLA A-A-59567-2001 HOSE AND HOSE ASSEMBLIES, RUBBER (YARN OR FABRIC REINFORCED) WATER SERVICE [Superseded: DLA ZZ-H-601 E CANC NOTICE 1, DLA ZZ-H-601 E, DLA ZZ-H-601 D, DLA ZZ-H-601 C, DLA ZZ-H-601 B (1), DLA ZZ-H-601 B, DLA ZZ-H-601 A (1), DLA ZZ-H-601 A]
DLA A-A-55190-1993 SEWING KIT [Superseded: DLA MIL-S-3276 H CANC NOTICE 3, DLA MIL-S-3276 H CANC NOTICE 2, DLA MIL-S-3276 H NOTICE 1, DLA MIL-S-3276 H, DLA MIL-S-3276 G, DLA MIL-S-3276 F, DLA MIL-S-3276 E (4), DLA MIL-S-3276 E (2), DLA MIL-S-3276 E]
DLA A-A-59613-2001 HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY [Superseded: DLA ZZ-H-521 F CANC NOTICE 1, DLA ZZ-H-521 F, DLA ZZ-H-521 E, DLA ZZ-H-521 D, DLA ZZ-H-00521 C, DLA ZZ-H-521 B (2), DLA ZZ-H-521 B (1), DLA ZZ-H-521 B, DLA ZZ-H-521 A (3), DLA ZZ-H-521 A
DLA A-A-59495-1999 GLOVES, WOMEN'S (SUPERSEDES MIL-G-1007) [Superseded: DLA MIL-G-1007 H CANC NOTICE 1, DLA MIL-G-1007 H CANC NOTICE 1, DLA MIL-G-1007 H INT AMD 1, DLA MIL-G-1007 H, DLA MIL-G-1007 G, DLA MIL-G-1007 F, DLA MIL-G-1007 E (2), DLA MIL-G-1007 E (1), DL

U.S. Military Regulations and Norms

ARMY AA-R-211 G (3)-1975 REFRIGERATORS, MECHANICAL, HOUSEHOLD (ELECTRICAL, SELF-CONTAINED) [Use In Lieu Of: ARMY AA-R-00211 H]

CZ-CSN

CSN 22 0811 Cast.1-1983 Cutting tips, form G, H, J
CSN 14 0618-1992 Hermetic refrigerating compressors up to 560 cm3. s -1 (2,0 m3. h -1) Technical requirements on construction, refrige-rating technique and method of tests

American National Standards Institute （ANSI)

ANSI/ASHRAE 147-2019 Includes ANSI/ASHRAE addenda listed in Appendix E Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems
ANSI/ASHRAE 34-2022 add e-2023 Designation and Safety Classification of Refrigerants addendum e

RU-GOST R

GOST R 53849-2010 Frozen pressed skinless cod fillet. Specifications

German Institute for Standardization

DIN 69001-55:1994 Machine tools; multi-spindle heads; mounting rings types E to H
DIN 69001-55:1994-01 Machine tools; multi-spindle heads; mounting rings types E to H

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 32M-1998 Video Recording - 1/2-in Type H - Cassette, Tape and Records
SMPTE 32M-1998 Video Recording - 1/2-in Type H - Cassette, Tape and Records

NATO - North Atlantic Treaty Organization

STANAG 2234-2013 ALLIED JOINT DOCTRINE FOR HOST NATION SUPPORT (ED 3)
AJP-4.5-2013 ALLIED JOINT DOCTRINE FOR HOST NATION SUPPORT (ED B; Ver. 1)

American Society of Mechanical Engineers (ASME)

ASME B29.400-2001 Combination,
ASME B29.400-2001(R2013) Combination,

BSI

BS 219:1925 Soft solders (grades a,b,c,d,e,f,g,h and j)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM35206-2010 SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A Rev 2 [Superseded: DLA MS35206 REV H CANC NOTICE 1, DLA MS35206 REV H (1), DLA MS35206 REV H, DLA MS35206 REV G, DLA MS35206 REV F, DLA MS35206 REV E, DLA MS35206 REV D, DLA MS35206]

Korean Agency for Technology and Standards (KATS)

KS H 6032-2016 Frozen fish cutlet
KS H 7113-2023 Frozen fish fillet
KS H 6032-2021 Frozen fish cutlet
KS H 7113-2018 Frozen Fish Fillet

British Standards Institution (BSI)

BS ISO 5610-14:2010 Tool holders with rectangular shank for indexable inserts. Style H
BS ISO 5610-14:2014 Tool holders with rectangular shank for indexable inserts. Style H