device sd
device sd, Total:28 items.
The international standard classification for "device sd" includes: .
The Chinese standard classification for "device sd" includes: Lightning arrester , Hydrology and water conservancy instrument , Relay protection and automatic device .
Professional Standard - Hydroelectric Power
- SD 285-1988 Technical Specifications for Static Time Relay
- SD 277-1988 Technical Specifications for Static Power Direction Relay
- SD 326-1989 Technical specifications for imported 220-500 kV power transformers
- SD 278-1988 Technical Specifications for Static Over-excitation Relay
- SD 106-1982 Series Spectrum of Geotechnical Testing Instruments
- SD 284-1988 Technical specifications for static voltage relay
- SD 333-1989 Technical specifications for imported current transformer and capacitive voltage transformers
- SD 179-1986 low voltage AC gapless metal oxide arresters
- SD 124-1984 Series for Rock Test Instruments in Hydraulic and Hydroelectric Engineering (Trial Implementation)
- SD 281-1988 Technical specifications for static generator rotor earthing relay
- SD 327-1989 Technical specifications for imported 330/500 kV shunt reactors
- SD 279-1988 Technical Specifications for Static Impedance Relay
- SD 283-1988 Technical Specifications for Static Current Relay
- SD 176-1986 Technical specifications for metal oxide arresters of 3-500 kV AC power systems
- SD 282-1988 Technical Specifications for Static Generator Stator Earthing Relay
(U.S.) Ford Automotive Standards
- FORD SD-M1A9109-B-2002 STEEL RUSTLESS FOR DECORATIVE TRIM ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on SD-M1A9109-A
- FORD SD-M3G9505-B2-1994 TAPE, PVC FOAM - CLOSED CELL - ONE SIDE PRESSURE SENSITIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 6MM Shown on SD-M3G9505-A2
GSO
- SD 234-1987 Power meter
- SD 116-1984 Guidelines for material selection of condenser tubes in thermal power plants
- SD 290-1988 Technical requirements for gas-insulated metal-enclosed electrical appliances
- SD 236-1987 Inspection procedures for power meter
- SD 340-1989 Welding process assessment procedures for boilers and pressure vessels in thermal power plants
- SD 205-1987 Technical requirements for high voltage shunt capacitors
- SD 314-1989 Earth-rock Dam Observation Instrument Series
- SD 219-1987 Rural installation and operation procedures for leakage protection devices
- SD 187-1986 Guidelines for analysis and determination of dissolved gases in transformer oil
- SD 317-1989 Technical requirements for 10kV AC automatic recloser
- SD 319-1989 Technical requirements for outdoor AC high voltage drop-out fuses and fuses
sd,time sd,sd card,sD284,degree sd,sd technology,sd request,sd-1,sd degree,Ellipse sd,device sd,SD 1,standard sd,sd%,sd hd,sd deviation,streaming sd,Silicone rubber sd,Deviation sd,within sd