piezoelectric material

piezoelectric material, Total:200 items.

The international standard classification for "piezoelectric material" includes: Radiographic equipment , Materials and components for shipbuilding , Piezoelectric and dielectric devices , Measurement of electrical and magnetic quantities , Thermoplastic materials , Seals .

The Chinese standard classification for "piezoelectric material" includes: Medical ultrasound, laser, high-frequency instrument and equipment , Vessel materials and their inspection methods , Special electronic technology material , Filter and delay line , Quartz crystal and piezoelectric element , Electronic measurement and equipment in general , Basic standards and general methods for synthetic resin and plastic , Technical management , Other rubber products .

Professional Standard - Machinery

JB/T 12748-2015 Methods of test for the performance of wood alternative composite material for delivery drums for wires and cables
JB/T 6819.3-1993 Instrument material terminology - Resistance material, conducting material and electric contact material

Group Standards of the People's Republic of China

T/SHPTA 071.2-2023 Semi-conductive rubber for high voltage cable accessories-Part 2:Semi-conductive rubber
T/SHPTA 071.1-2023 Insulating rubber for high voltage cable accessories-Part 1:Insulating rubber
T/ESD 2005-2022 Measurement method for fractional voltage of planar materials
T/CEC 560.1～560.2-2021 Materials for rated voltage 500kV DC cables
T/CAS 459-2020 Conformance evaluation for wire and cable material —Polyolefin material

Professional Standard - Medicine

YY/T 0110-1993 Medical ultrasonic electroceramics materials
YY/T 0110-2009 Piezoelectric materials for medical ultrasound

Professional Standard-Ships

CB 1125-1998 Specification for piezoelectric ceramic material of underwater sound

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9352-2008 Plastic - Compression moulding of test specimens of thermoplastic materials
GB/T 42719-2023 Measurement method for fractional voltage of planar materials
GB/T 11320-1989 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
GB 11320-1989 Piezoelectric Ceramic Material Properties Test Method for Low Mechanical Quality Factor Piezoelectric Ceramic Material Properties
GB/T 9532-2012 Designations for piezoelectric crystals
GB/T 3388-2002 Designations for types of piezoelectric ceramics

Professional Standard - Building Materials

JC/T 2025-2010 Lead magnesium niobate titanate (PMNT) piezoelectric single crystals

Professional Standard - Electron

SJ/T 11067-1996 Commonly used terms for semiconductor photoelectric materials and pyroelectric materials in infrared detecting materials

Professional Standard - Chemical Industry

HG/T 2887-1997 Rubber material used for tramsformer

Arbeitsgemeinschaft Druckbehälter (AD)

AD 2000-Merkblatt W10-2016 Materials for pressure vessels. Materials for low temperatures. Ferrous materials
AD 2000-Merkblatt W0-2006 Materials for pressure vessels.General principles for materials
AD 2000-Merkblatt W0-2016 Materials for pressure vessels. General principles for materials
AD 2000-Merkblatt W6/1-2003 Materials for pressure vessels.Aluminium and aluminium alloys.Wrought materials

Comitato Elettrotecnico Italiano

CEI 9-24/10:1997 Material for overhead contact lines of railways, subways and tramways with nominal voltage up to 3 kV - Supports in insulating material

German Institute for Standardization

DIN 51911:2020-06 Draft Document - Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51911 E:2020-06 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 7744-2:1989 Plastic molding materials Polycarbonate (PC) Thermoplastic molding materials
DIN 51911:2020 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN VDE 0312:1959 Rules for testing methods for laminates; vulcanized fibres for electrical engineering
DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51911 E:2020 Draft Document - Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
DIN 51919 E:2012-06 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51919:1999-12 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 50134:2024 Testing of metallic materials - Compression test of metallic cellular materials
DIN 51919 E:2012 Draft Document - Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 50134:2024-07 Testing of metallic materials - Compression test of metallic cellular materials
DIN 7708-2:1975 Polyphenol plastic molding material types
DIN 50134:2008-10 Testing of metallic materials - Compression test of metallic cellular materials
DIN EN 50324-3:2002-12*VDE 0336-3:2002-12 Piezoelectric properties of ceramic materials and components
DIN EN 50324-1:2002-12*VDE 0336-1:2002-12 Piezoelectric properties of ceramic materials and components
DIN 51910:2009 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN EN 50324-2:2002-12*VDE 0336-2:2002-12 Piezoelectric properties of ceramic materials and components
DIN EN ISO 8492 E:2013-06 Flattening test of metal pipes (draft)
DIN 51910:2009-05 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 7741-2:1988 Plastic moulding materials Polystyrene (PS) moulding materials Preparation of test specimens and determination of properties
DIN 51910:2020 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 50134:2008 Testing of metallic materials - Compression test of metallic cellular materials
DIN 50136:1964 Metal material ring pressure test Pipe test
DIN EN ISO/ASTM 52903-1:2021-06 Additive manufacturing - Material extrusion-based additive manufacturing of plastic materials - Part 1: Feedstock materials (ISO/ASTM 52903-1:2020); German version EN ISO/ASTM 52903-1:2021
DIN EN 62899-2-1 E:2014-11 Printed electronic materials Part 2-1: Conductive material inks
DIN 51910:2020-12 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 40600:1958 Laminated insulation material (pre-laminated paperboard)
DIN EN 16486 A1 E:2018-09 Machines for compressing waste materials or recyclable materials - Safety requirements for compressors
DIN 50134 E:2023 Draft Document - Testing of metallic materials - Compression test of metallic cellular materials
DIN 51910 E:2020-05 Testing of carbonaceous materials - Determination of compressive strength - Solid materials
DIN 53748:1970-07 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
DIN 16775-2:1988 Plastic molding materials - Preparation of test specimens and determination of properties of styrene acrylonitrile (SAN) molding materials

Spanish Association for Standardization (UNE)

AENOR UNE 53026:1955 PLASTIC MATERIALS. DETERMINATION OF HEAT DEFORMATION OF MOLDED PLASTIC MATERIALS
AENOR UNE 53031:1974 Plastic materials. Determination of the surface electrical resistance of thermostable plastic materials.
UNE 21-347 Pt.2-1991 Electrical insulation materials. Mica-based materials. Description of heating materials
UNE 53031:1974 PLASTICS MATERIALS. DETERMINATION OF SUPERFICIAL RESISTANCE OF THERMOSETTING PLASTICS MATERIALS
UNE 21-381 Pt.3-1991 Electrical insulation materials. Ceramic and glass materials. Description of individual materials
UNE 53-049 Pt.1-1990 Polymer plastic materials for backlog and molding. Part 1 Material use
UNE 20 349 Conductor input plastic gland in low voltage electrical material packaging
AENOR UNE 53083:1959 Plastic materials. Determination of the specific resistance of solid insulating materials.
AENOR UNE 53040:1955 PLASTIC MATERIALS. DETERMINATION OF THE RESISTANCE TO THE FORMATION OF A CONDUCTIVE FINGERPRINT BY A LOW VOLTAGE AND MEDIUM INTENSITY ARC IN SOLID INSULATING MATERIALS
UNE-EN ISO 8492:2014 Metallic materials - Tube - Flattening test (ISO 8492:2013)
AENOR UNE 53032:1974 Plastic materials. Determination of the resistance and transverse resistivity of thermoset plastic materials.

GCC Standardization Organization

GSO ISO 3915:2013 Plastics - Measurement of resistivity of conductive plastics
GSO IEC/TS 61994-4-2:2014 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
GSO ISO 8492:2016 Metallic materials -- Tube -- Flattening test

Ente Nazionale Italiano di Unificazione

UNI EN ISO 295:2000 Plastics - Compression moulding of test specimens of thermosetting materials
UNI EN ISO 295:2005 Plastics - Compression moulding of test specimes of thermosetting materials
UNI EN ISO 293:2005 Plastics - Compression moulding of test specimens of thermoplastic materials
UNI EN ISO 3915:2001 Plastics - Measurement of resistivity of conductive plastics
UNI EN 10233:1995 Metallic materials. Tube. Flattening test.
UNI 4269-1959 Plastic material testing. Thermohard materials*. Determination of particle size distribution of stamping materials, replacing UNI 3630
UNI 4302-1959 Aminoplastic materials for stamping
UNI EN ISO 8492:2005 Metallic materials - Tube - Flattening test
UNI EN ISO 8492:2014 Metallic materials - Tube - Flattening test
EC 1-2005 UNI EN ISO 8492:2005 Metallic materials - Tube - Flattening test
UNI 4271-1960 Plastic material testing. Thermohard materials*. Determination of particle sliding degree of stamping materials*, replacing UNI 3631
UNI 4272-1959 Plastic material testing. Thermohard materials*. Determination of punching factors, replaces UNI 3626
UNI EN 10236:1995 Metallic materials. Tube. Ring expanding test.
UNI 4905-1962 Elastomeric Materials: Testing of Vulcanized Materials, Standard Atmosphere and Conditioning
UNI EN ISO 604:2008 Plastics - Determination of compressive properties
UNI 4279-1972 Plastic material testing. Compression Characteristics Measurement
UNI 9787:1990 Hexagon head thread rolling screws for plastic materials.
UNI 4293-1959 Plastic material testing. Thermohard materials*
UNI 4292-1959 Plastic material testing. Thermohard materials*

GM Europe

GME GMI 60459-2010 Voltage potential measurements between organic and metallic materials (English/German)

Magyar Szabványügyi Testület

MSZ 7456-1962 Backlog Materials, Aminoplastics
MSZ 15747/11-1982 Electrical insulation material testing. voltage test
MSZ 7254-1970 Electrical insulating material arc detection high voltage, low voltage arc
MNOSZ 4855-1951 Power resistor raw materials. Surface resistance measurement of resistive raw materials

National Standardisation Body (ASRO)

STAS 10289-1982 Solid electroinsulating materials THERMOSETTING LAMINATED MATERIALS Test methods

Yugoslav Association for Standardization

JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are

Association of German Mechanical Engineers

VDI 3186 Blatt 1-1995 Tool materials for cold forging - List of tool materials
VDI 3388-1983 Werkstoffe fuer Stanzwerkzeuge
VDI 3388-1973 Werkstoffe fuer Stanzwerkzeuge

Electrostatic Discharge Association (ESDA)

ESD S7.1-2005 Resistive Characterization of Materials-Floor Materials
ESD DS7.1:1992 REVISED - Floor Materials - Resistive Characterization of Materials

Association Francaise de Normalisation

FD U42-412:2014 Fertilizers - Liming materials, liming materials-fertilizers and fertilizers - Determination of the crushing strength
NF A03-092*NF EN ISO 8492:2014 Metallic materials - Tube - Flattening test
NF A03-092:1994 Metallic materials. Tube. Flattening test.
NF T58-003:1994 Plastics. Compression moulding test specimens of thermoplastic materials.
NF EN 61234-2:1998 Electrical insulating materials - Test methods for hydrolytic stability - Part 2: molded thermosetting materials

Finnish Standards Institute

SFS 3815-1976 Overhead cable materials. Beam material
SFS 4381-1979 ILMAJOHTOTARVIKKEET. RIIPPUJOHTOTARVIKKEET.YLEISKATSAUS
SFS 1101-1977 Construction materials for pressure vessels. Steel for pressure vessels. Sampling and material testing

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.23-1979 Soldering Resistance of Laminate Materials
IPC TM-650 2.5.7B-1987 Dielectric Withstanding Voltage@ Printed Wiring Material

Standards Norway

NS-EN 10233:1993 Metallic materials — Tube — Flattening test

Danish Standards Foundation

DS/ISO 8492:1989 Metallic materials. Tube. Flattening test
DANSK DS/EN ISO 8492:2013 Metallic materials - Tube - Flattening test
DS/EN ISO 8492:2004 Metallic materials - Tube - Flattening test

Korean Agency for Technology and Standards (KATS)

KS B ISO 8492:2001 Metallic materials Tube Flattening test
KS B ISO 8492-2021 Metallic materials－Tube－Flattening test
KS C 2127-1996 Testing method for proof-voltage testing of thin solid electrical insulating materials
KS W 1126-2003 Core material, plastic honeycomb, laminated glass fabric base,for aircraft structural and electronic applications
KS D 5577-1982 Tantalum flat mill products, rod and wire
KS D 5577-2009 Tantalum flat mill products, rod and wire

European Committee for Standardization (CEN)

EN ISO 8492:2004 Metallic materials - Tube - Flattening test
EN ISO 8492:2013 Metallic materials - Tube - Flattening test
prEN 220-1985 Elastomeric dental impression materials

Swedish Institute for Standards

SS-EN ISO 8492:2005 Metallic materials - Tube - Flattening test (ISO 8492:1998)
SS 112644:1986 Metallic materials - Tubes - Flattening test
SIS 12 21 11-1957 Round material. extruded brass
SS-EN ISO 8492:2013 Metallic materials - Tube - Flattening test (ISO 8492:2013)

British Standards Institution (BSI)

BS EN 10233:1994 Metallic materials. Tube. Flattening test
BS EN 61234-2:1998 Method of test for hydrolytic stability of electrical insulating materials. Moulded thermosets
BS EN ISO 8492:2004 Metallic materials. Tube. Flattening test
BS EN ISO 8492:2013 Metallic materials. Tube. Flattening test
BS DD IEC/TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Materials - Materials for dielectric devices
BS 6404-8.10:1995 Magnetic materials. Individual materials-Specification for magnetic materials (iron and steel) for use in relays
BS 1539:1949 Specification. Moulded electrical insulating materials for use at high temperatures
BS 1540:1949 Specification. Moulded electrical insulating materials for use at radio frequencies
DD IEC/TS 61994-4-3:2008 Piezoelectric and dielectric devices for frequency control and selection. Glossary - Materials. Materials for dielectric devices
BS 6404-8.1:2001 Magnetic materials - Individual materials - Magnetically hard materials
BS 16:1905 Telegraph material
BS EN 61212-3-2:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated moulded tubes
BS IEC 62899-201:2016+A1:2018 Printed electronics - Materials. Substrates
DD IEC/TS 61994-4-2:2011 Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection. Glossary - Piezoelectric and dielectric materials. Piezoelectric ceramics
BS EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
BS EN ISO 293:2006 Plastics - Compression moulding of test specimens of thermoplastic materials
BS 6404-8.1:1988 Magnetic materials. Individual materials-Specification for magnetically hard materials
BS EN 61212-3-1:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Specifications for individual materials - Round laminated rolled tubes
BS EN 61212-3-2:2013 Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Specifications for individual materials. Sheet 2: Round laminated moulded tubes
BS EN ISO 3386-1:2025 Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression - Low-density materials
BS EN 13445-2:2002+A2:2006 Unfired pressure vessels-Materials

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 1830-2008 Metallic materials.Tube.Flattening test
TCVN 1832-2008 Metallic materials.Tube.Hydrolic pressure test

International Organization for Standardization (ISO)

ISO 8492:1986 Metallic materials; Tube; Flattening test

GM Holden Ltd

HOLDEN HN 1911-2000 Moulded Sound Insulation Material
HOLDEN HN 1911-2012 Moulded Sound Insulation Material
HOLDEN HN 0053-2012 Resistance to Arcing or Charring of Dielectrically Embossed Materials
HOLDEN HN 2424-2003 DEADENER PATCH - PRESSURE SENSITIVE
HOLDEN HN 0053-1989 Resistance to Arcing or Charring of Dielectrically Embossed Materials

Standard Association of Australia （SAA）

AS 2776:1985 Pressure sensitive adhesive label stock - Plastics
AS 2183:1991 Flexible wrappings (including laminates) for rindless cheese
AS 2183:1978 Flexible wrappings (including laminates) for rindless cheese

American Society for Testing and Materials (ASTM)

ASTM D4976-04a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12a(2020) Standard specifications for polyethylene plastic molding and extrusion materials
ASTM D4976-06 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-02e1 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-04 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D1825-92(2002) Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ASTM D1825-92(1997) Standard Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing
ASTM D4976-12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-12 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D4976-02 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
ASTM D1248-00a Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1248-04 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1248-02 Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8492:2016 Metallic materials -- Tube -- Flattening test

Canadian Standards Association (CSA)

CAN/CSA-N285.6.9-1988 Materials for supporting pressure components

Aerospace Industries Association

AIA NAS 1941-1996 Rubber, Synthetic, Cable Grommet Material

American National Standards Institute （ANSI)

ANSI/NEMA LD 3-2005 High-Pressure Decorative Laminates

Czech Standards Institute (UNMZ)

CSN ISO 7802:1994 Metallic materials. Wire. Wrapping test
CSN 64 2013 Z4-2000 plastic. Hardenable pressed material. Ammonia plastic
CSN 34 6471-1986 Test methods for electric insulating materials. Test method for determination of resistance insulating materials to high-voltage arc
CSN 64 2013 Z3-1999 plastic. Hardenable pressed material. Ammonia plastic

Aerospace Industries Association/ANSI Aerospace Standards

NAS1941-1996 Rubber@ Synthetic@ Cable Grommet Material

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0674-3 Berichtigung 1-1999*DIN EN 61264 Berichtigung 1:1999 Specification for ceramic materials for piezoelectric insulators
VDE 0303-3 DIN VDE 0303-3-1983*DIN 53482:1983 Tests for electrical purposes - Non-metallic materials - Measurement of the electric resistance

Bureau of Indian Standards

IS 11014-4-1989 Piezoelectric Ceramic Materials - Part 4 : Type 5 H

Swiss Association for Standardization (SNV)

SNV 40807 a-1959 Comparative summary of plastics (organic plastics), laminates

Japanese Industrial Standards Committee (JISC)

JIS K 6896:1995 Polytetrafluoroethylene powder for molding and extrusion materials

International Electrotechnical Commission (IEC)

IEC 49/855/CD:2009 Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
IEC TS 61251:1993 Electrical insulating materials - A.C. voltage endurance evaluation - Introduction

Gosstandart of Russia

GOST R 71247-2024 Welding consumables. Сonsumables for hard-facing
GOST R EN 13416-2008 Roofing, hydraulic-insulating, flexible, bitumen-based materials and polymeric (thermoplastic or elastomer) materials. Rules for sampling

U.S. Military Regulations and Norms

ARMY MIL-P-43038 B VALID NOTICE 5-2013 Plastic Molding Material, Polyester, Low-Pressure Laminating, High Temperature Rresistant
ARMY MIL-P-43038 B REINST NOTICE 3-2000 PLASTIC MOLDING MATERIAL, POLYESTER, LOW-PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT

Türk Standardları Enstitüsü

TS 207-1965 COMPRESSION TESTING OF METALLIC MATERIALS

The Institution of Engineering and Technology (IET)

HDBK ELEC RESIST-2012 The Handbook of Electrical Resistivity: New materials and pressure effects

Lithuanian Standards Office

LST EN ISO 8492:2004 Metallic materials - Tube - Flattening test (ISO 8492:1998)