Teflon fixation

Teflon fixation, Total:397 items.

The international standard classification for "Teflon fixation" includes: Man-made fibres , Rubber and plastics products in general , Other rubber and plastics products , Films and sheets , Seals, glands , Thermoplastic materials , Equipment for the chemical industry , Hoses and hose assemblies , Seals for pipe and hose assemblies .

The Chinese standard classification for "Teflon fixation" includes: Chemical fibre , Plastic profile , Daily use plastic products , Sealing and sealing device , Basic standards and general methods for synthetic resin and plastic , Non-metal chemical machinery equipment , Synthetic resin and plastic , Pipeline fittings , Hot processing technology .

Group Standards of the People's Republic of China

T/QGCML 1028-2023 PTFE wrapped insulated polyperfluoroethylene propylene sheathed shielded high temperature resistant control cable
T/FSI 035-2019 Ultra-high molecular weight polytetrafluoroethylene resin
T/FSI 056-2020 Ethylene-tetrafluoroethylene copolymer resin
T/ZZB 0067-2016 Microporous PTFE membrane
T/FSI 069-2021 Low Creep PTFE Suspension Resin
T/SDAS 11-2017 PTFE filament fiber
T/SDMS 007-2022 Polytetrafluoroethylene reinforced membrane for proton exchange membrane
T/FSI 068-2021 High Strength PTFE Suspension Resin
T/ZZB 2758-2022 Polytetrafluoroethylene bellows compensators
T/SDAS 12-2017 PTFE staple fiber
T/ZZB 1766-2020 Reacting caldron lined with fluoroplastics of Ethylene-Teflon Copolymer（ETFE）
T/FSI 066-2021 Polytetrafluoroethylene dispersion resin for heat exchange tubes
T/SHPTA 058-2023 Ethylene-tetrafluoroethylene copolymer for wires, cables and optical cables
T/SDMS 008-2023 PTFE acoustic compounded membrane
T/SHPTA 073-2024 Polytetrafluoroethylene film for wires and cables wrapping
T/SDAS 206-2020 Polytetrafluoroethylene (PTFE) nanocomposite film for masks
T/ZZB 0831-2018 Polytetrafluoroethylene based high frequency printed circuit board
T/FSI 037-2019 Polytetrafluoroethylene dispersion emulsion for coating
T/FSI 058-2020 Energy consumption quota per unit product of PTFE
T/FSI 025-2019 Fine particle polytetrafluoroethylene resin for electrical use
T/FSI 038-2019 PTFE resin for fibers
T/ZZB 0242-2017 Polytetrafluoroethylene lining vessels
T/CSTM 00330-2021 PTFE sealing plate
T/FSI 028-2019 Fusible polytetrafluoroethylene resin
T/FSI 024-2019 High compression ratio PTFE dispersion resin

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35748-2017 Polytetrafluoroethylene filament

Professional Standard - Light Industry

QB/T 3628-1999 Polytetrafluoroethylene (PTFE) Tapes for Thread Sealing
QB/T 3627-1999 Polytetrafluoroethylene Film
QB/T 4877-2015 Polytetrafluoroethylene tube
QB/T 3626-1999 Polytetrafluoroethylene Rod
QB/T 5002-2016 Biaxially oriented polytetrafluoroethylene membrane for filtration
QB/T 4041-2010 Polytetrafluoroethylene Rod
QB/T 3624-1999 Polytetrafluoroethylene Tube
QB/T 4876-2015 Polytetrafluoroethylene skived film
QB/T 3625-1999 Polytetrafluoroethylene Plate
QB/T 5257-2018 Polytetrafluoroethylene (PTFE) sheet

工业和信息化部

HG/T 5312-2018 Polytetrafluoroethylene composite membrane for screen mesh
JB/T 10688-2020 polyfluortetraethylene gaskets

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38173-2019 Polytetrafluoroethylene staple fibre

Taiwan Provincial Standard of the People's Republic of China

CNS 10511-1983 Polytetrafluoroethylene Sheets
CNS 10616-1992 Polytetrafluoroethylene (Teflon) Insulated Copper Braided Polyvinylchloride Jacketed Wire
CNS 10612-1983 Polytetrafluoroethylene (Teflon) Insulated Electrical Wire
CNS 10510-1983 Polytetrafluoroethylene Tapes

Professional Standard - Machinery

JB/T 8560-2013 Carbonized Fibre/Polytetrafluoroethylene Braided Packing
JB/T 7898-1999 Filled polyterafluoroethylene slideway soft strips
JB/T 6626-2011 Polytetrafluoroethylene braided packing
JB/T 14646-2023 Low creep structured PTFE gasket
JB/T 12426-2015 Heat-shrinkable PTFE sleeving for electrical purposes
JB/T 7898-2013 Filled polytetrafluoroethylene slideway soft strips
JB/T 8558-1997 Asbestos/teflon mixed woven padding
JB/T 10688-2006 Specifications of polyfluortetraethylene gaskets
JB/T 8873-2023 Technical specifications for filled polytetrafluoroethylene and polytetrafluoroethylene blanks for mechanical seals
JB/T 8873-1999 Teflon and teflon blank filler intended to be used in mechanical sealing. Technical specification
JB/T 8560-1997 Carbonized Fibre/Teflon Mixed Woven Paddings
JB/T 10689-2006 Specifications of expanded polytetrafluoroethylene tape
JB/T 8873-2011 Specification of filling-PTFE and PTFE blank for mechanical seal

Professional Standard - Chemical Industry

HG/T 2901-1997 Testing method for particle size of polytetrafluoroethylene resin
HG/T 2902-1997 Polytetrafluoroethylene molding powder
HG/T 2899-1997 Designation of polytetrafluoroethylene materials
HG/T 3705-2003 The pipes and fittings lined with metal meshed - PTFE
HG/T 20536-1993 PTFE lined equipment
HG/T 3985-2007 Polytetrafluoroethylene bellows compensators
HG/T 21562-1994（编制说明） PTFE-lined steel pipe and fittings
HG/T 4172-2011 Shell and tube polytetrafluoroethylene heat exchanger
HG/T 21562-1994 HG/T 21562-1994
HG/T 2903-1997 Finely granular Polytetrafluoroethylene resin used for molding
HG/T 3028-1999 Polytetrafluoroethylene resins for paste extrusion

Military Standard of the People's Republic of China-General Armament Department

GJB 5344-2004 Specifications for polytetrafluoroethylene films
GJB 3025A-2019 Specification for polytetrafluoroethylene rods
GJB 8279-2014 Specification for PTFE bar filled with poly (phenyl p-hydroxybenzoate)
GJB 3026-1997 Specification for polytetrafluoroethylene large sheets
GJB 8272-2014 Specification for expanded polytetrafluoroethylene sealant
GJB 9668-2019 Specification for 28MPa, 204℃ polytetrafluoroethylene hose components
GJB 8282-2014 Specification for convoluted polytetrafluoroethylene tube
GJB 2837A-2017 General specification for polytetrafluoroethylene hose assembly
GJB 8536-2015 Specification for polytetrafluoroethlene film in aerospace
GJB 3025-1997 Specification for polytetrafluoroethylene rods
GJB 8537-2015 Specification for polytetrafluoroethylene paste-extruding tube
GJB 8280-2014 Specification for PTFE plate filled with poly (phenyl p-hydroxybenzoate)
GJB 3026A-2019 Specification for polytetrafluoroethylene large sheets
GJB 8278-2014 Specification for PTFE pipes filled with poly (phenyl p-hydroxybenzoate)
GJB 5336-2004 Specification for polytetrafluoroethylene composite fabrics
GJB 2837-1997 Specification for polytetrafluoroethylene hose assemblies

Professional Standard - Building Materials

JC/T 341-1982 PTFE Asbestos Packing

未注明发布机构

DLA MS28774M-2009 DETAIL SPECIFICATION SHEET RETAINER, PACKING BACKUP, SINGLE TURN, POLYTETRAFLUOROETHYLENE

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15700-2008 Polytetrafluoroethylene bellows compensators
GB/T 13404-1992 Polytetrafluorethylene envelope gaskets for pipe flanges

机械工业部

JB/T 7898-1995 Filled PTFE guide rail tape

Shanghai Provincial Standard of the People's Republic of China

DB31/ 144-1994 Expanded polytetrafluoroethylene venous vessel
DB31/ 148-1994 Expanded polytetrafluoroethylene gastroscope forceps catheter tube body
DB31/ 147-1994 Expanded polytetrafluoroethylene artificial trachea
DB31/ 145-1994 expanded polytetrafluoroethylene arteries
DB31/ 146-1994 Expanded polytetrafluoroethylene cardiac patch

Professional Standard - Aviation

HB 6150-1988 PTFE insulated wire for aviation
HB 5478-1991 Polytetrafluoroethylene/Glass Cloth Use for Demolding

Anhui Provincial Standard of the People's Republic of China

DB34/T 1450-2011 Fusible polytetrafluoroethylene (PFA) insulated wire

Professional Standard - Petrochemical Industry

SH/T 3402-1996 Polytetrafluorothylene envelope gaskets for pipe flanges

Professional Standard - Agriculture

GB 7137-1986 Testing method for particle size of polytetrafluoroethylene resin

Defense Logistics Agency

DLA MS28782 REV E-2006 RETAINER, PACKING, BACK-UP, TEFLON
DLA MS27595 REV E VALID NOTICE 1-2010 Retainer, Packing Backup, Continuous Ring, Polytetrafluoroethylene
DLA MS27595 REV E-2006 RETAINER, PACKING BACKUP, CONTINUOUS RING, POLYTETRAFLUOROETHYLENE
DLA DSCC-DWG-88012 REV D-2004 CAPACITORS, FIXED, METALLIZED PTFE (TEFLON) DIELECTRIC, HERMTICALLY SEALED
DLA MS28783 REV F-2006 RING GASKET, BACK-UP, PTFE
DLA A-A-59602 VALID NOTICE 1-2006 TUBE, SPIRAL WRAP, POLYETHYLENE, POLYTETRAFLUOROETHYLENE AND POLYAMIDE
DLA MS28774 REV L VALID NOTICE 2-2008 RETAINER, PACKING BACKUP, SINGLE TURN TETRAFLUOROETHYLENE
DLA QPL-27267-QPD-2011 HOSE, POLYTETRAFLUOROETHYLENE, 450DEG F, MEDIUM PRESSURE
DLA MS28774 REV L (2)-2003 RETAINER, PACKING BACKUP, SINGLE TURN TETRAFLUOROETHYLENE
DLA MIL-DTL-27267 C-2003 HOSE, POLYTETRAFLUOROETHYLENE, 450 DEG. F, MEDIUM PRESSURE
DLA MS28774 REV L NOTICE 1-2003 RETAINER, PACKING BACKUP, SINGLE TURN TETRAFLUOROETHYLENE
DLA MS28774 REV L-1990 RETAINER, PACKING BACKUP, SINGLE TURN TETRAFLUOROETHYLENE
DLA QPL-26633-20-2006 HOSE ASSEMBLY, POLYTETRAFLUORETHYLENE, OXYGEN
DLA QPL-26633-20 NOTICE 1-2008 Hose Assembly, Polytetrafluoroethylene, Oxygen
DLA MS21122 REV D VALID NOTICE 1-2010 Clamp, Loop, Cushioned, Wedge, Polytetrafluoroethylene
DLA MIL-DTL-27272 C SUPP 1-2003 FITTINGS, POLYTETRAFLUOROETHYLENE HOSE, HIGH-TEMPERATURE, MEDIUM-PRESSURE, GENERAL SPECIFICATION FOR
DLA MIL-DTL-32435-2013 HOSE, POLYTETRAFLUOROETHYLENE, CONVOLUTED, 450癋, MEDIUM PRESSURE
DLA MIL-DTL-25579 F SUPP 1-2003 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE GENERAL SPECIFICATION FOR
DLA MIL-DTL-27272 C-2003 FITTINGS, POLYTETRAFLUOROETHYLENE HOSE, HIGH-TEMPERATURE, MEDIUM-PRESSURE, GENERAL SPECIFICATION FOR
DLA MIL-DTL-25579 F (3)-2006 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE GENERAL SPECIFICATION FOR
DLA MS21122 REV D-2005 CLAMP, LOOP, CUSHIONED, WEDGE, POLYTETRAFLUOROETHYLENE
DLA QPL-26633-2012 Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen
DLA MIL-DTL-26633 E-2007 HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN
DLA QPL-26633-QPD-2011 Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen

SAE - SAE International

SAE AMS3651C-1987 POLYTETRAFLUOROETHYLENE
SAE AMS3651C-1966 POLYTETRAFLUOROETHYLENE
SAE AMS3651D-1987 POLYTETRAFLUOROETHYLENE
SAE AS8791/1B-2007 Retainer@ Packing@ Hydraulic and Pneumatic@ Polytetrafluoroethylene@ Single Turn
SAE AS8791/1-1997 Retainer@ Packing@ Hydraulic and Pneumatic@ Polytetrafluoroethylene@ Single Turn
SAE AS8791A-2003 Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AS8791C-2014 Hydraulic and Pneumatic Retainers (Back-Up Rings)@ Polytetrafluoroethylene (PTFE) Resin
SAE AS4006-1993 HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ STRAIGHT TO STRAIGHT
SAE ARP1153A-1991 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing
SAE AMS3666A-1976 Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced
SAE AMS3652B-1986 POLYTETRAFLUOROETHYLENE FILM Non-Critical Grade
SAE AMS3666B-1978 Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced
SAE AMS3780-1981 COPPER WIRE POLYTETRAFLUORORETHYLENE Covered@ Miniature
SAE AS23053/14-2016 INSULATION SLEEVING@ ELECTRICAL@ HEAT SHRINKABLE ETHYLENE-TETRAFLUOROETHYLENE FLUOROPOLYMER@ SEMI-RIGID
SAE AMS3653-1957 PLASTIC TUBING@ ELECTRICAL INSULATION Polytetrafluoroethylene
SAE AMS3666-1964 Polytetrafluoroethylene Sheet@ Glass Fabric Reinforced
SAE AS3076-1970 RING - BACK-UP@ BOSS CONNECTION POLYTETRAFLUORETHYLENE
SAE AMS3533C-1995 ETHYLENE TETRAFLUOROETHYLENE (ETFE) EXTRUSIONS
SAE AMS-DTL-23053/14B-2018 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Ethylene-Tetrafluoroethylene Fluoropolymer@ Semi-Rigid
SAE AMS3842A-1976 Asbestos Polytetrfluoroethylene Sheet Fiber Reinforced
SAE AMS3652D-2015 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AMS3669E-2008 Polytetrafluoroethylene Sheet, Molded, Premium Grade, As Sintered
SAE AMS-DTL-23053/14-1999 Insulation Sleeving@ Electrical@ Heat Shrinkable@ Ethylene-Tetrafluoroethylene Fluoropolymer@ Semi-Rigid
SAE AMS3840E-1992 Fabric@ Asbestos Polytetrfluoroethylene Impregnated@ Sintered
SAE AMS2491F-2015 Surface Treatment of Polytetrafluoroethylene Preparation for Bonding
SAE AMS2515-1961 Polytetrafluoroethylene Resin Coating 700 - 750 F Fusion
SAE AS81822/6A-2011 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AS81822/6-2004 WIRE@ ELECTRICAL@ SOLDERLESS WRAP@ EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) INSULATION@ SILVER COATED SOLID CONDUCTOR
SAE AMS3666C-1985 Polytetrafluoroethylene (PTFE) Sheet@ Glass Fabric Reinforced

Society of Automotive Engineers (SAE)

SAE AMS3651-1953 POLYTETRAFLUOROETHYLENE
SAE AMS3651B-1957 POLYTETRAFLUOROETHYLENE
SAE AMS3651A-1954 POLYTETRAFLUOROETHYLENE
SAE AMS3651D-1994 POLYTETRAFLUOROETHYLENE
SAE AMS3652-1957 POLYTETRAFLUOROETHYLENE FILM
SAE AS8791/1A-1998 Reretainer, Packing, Hydraulic and Pneumatic, Polytetrafluoroethylene, Single Turn
SAE AS8791B-2009 Hydraulic and Pneumatic Retainers (Back-Up Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AMS3661-1966 POLYTETRAFLUOROETHYLENE FILM Premium Grade
SAE AMS3661C-1993 Polytetrafluoroethylene (PTFE) Film Premium Grade
SAE AMS3756C-2011 Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered
SAE AMS3661B-2011 POLYTETRAFLUOROETHYLENE FILM Premium Grade
SAE AMS3661A-1976 POLYTETRAFLUOROETHYLENE FILM Premium Grade
SAE AS8791D-2020 Hydraulic and Pneumatic Retainers (Backup Rings), Polytetrafluoroethylene (PTFE) Resin
SAE AMS3660C-1994 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3662C-2006 Polytetrafluoroethylene Film General Purpose Grade
SAE ARP1153A-2014 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing
SAE AMS3662C-1991 Polytetrafluoroethylene Film General Purpose Grade
SAE AMS3662D-2015 Polytetrafluoroethylene Film General Purpose Grade
SAE AMS3662-1966 POLYTETRAFLUOROETHYLENE FILM General Purpose Grade
SAE AMS3662B-1984 POLYTETRAFLUOROETHYLENE FILM General Purpose Grade
SAE AMS3662A-1976 POLYTETRAFLUOROETHYLENE FILM General Purpose Grade
SAE AS41088-2-1978 AS41088 Spiral Wrapping. P.T.F.E.
SAE AMS3756B-2008 Moldings, Glass Fiber Filled Polytetrafluoroethylene, 75% PTFE Resin, 25 Glass, As Sintered
SAE AS5861-2005 Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland FSC 5330
SAE AMS3661C-2006 Polytetrafluoroethylene (PTFE) Film Premium Grade
SAE ARP1153-1970 METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING
SAE AMS3652B-2011 POLYTETRAFLUOROETHYLENE FILM Non-Critical Grade
SAE AMS3533-1995 ETHYLENE TETRAFLUOROETHYLENE EXTRUSIONS
SAE AMS3780-1984 Copper Wire-Polytetrafluoroethylene Covered, Miniature
SAE AMS3652A-1966 POLYTETRAFLUOROETHYLENE FILM Non-Critical Grade
SAE AMS3840-1996 ASBESTOS, POLYTETRAFLUOROETHYLENE IMPREGNATED Sintered
SAE AS3076A-2022 RING - BACK UP, BOSS CONNECTION, POLYTETRAFLUORETHYLENE
SAE AMS3652C-1993 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade [Superseded: SAE AMS 3651D]
SAE AMS3533A-2011 ETHYLENE TETRAFLUOROETHYLENE EXTRUSIONS
SAE AMS3661D-2015 Polytetrafluoroethylene (PTFE) Film Premium Grade
SAE AMS3533B-1993 ETHYLENE TETRAFLUOROETHYLENE (ETFE) EXTRUSIONS
SAE AMS3842B-1984 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced
SAE AMS3652C-2006 Polytetrafluoroethylene (PTFE) Film Non-Critical Grade
SAE AMS3533C-1993 Ethylene Tetrafluoroethylene (Etfe) Extrusions
SAE AMS3842D-1985 Polytetrafluoroethylene Sheet, Asbestos Fiber Reinforced
SAE AS3076-2012 RING - BACK-UP, BOSS CONNECTION POLYTETRAFLUORETHYLENE
SAE AMS3842C-1986 POLYTETRAFLUOROETHYLENE SHEET Asbestos Fiber Reinforced
SAE AMS3666D-1993 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AMS3669D-1993 Polytetrafluoroethylene Sheet, Molded, Premium Grade, As Sintered
SAE AMS3668E-2011 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS3666E-2012 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AIR4092A-1996 Investigation of PTFE Melt Phenomenon for High Pressure Hoses
SAE AMS2491-1961 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS3653A-1959 TUBING, ELECTRICAL INSULATION Extruded Polytetrafluoroethylene
SAE AMS2491B-1974 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS3840E-1996 Fabric, Asbestos Polytetrafluoroethylene Impregnated, Sintered
SAE AMS3840A-1974 FABRIC, ASBESTOS Polytetrafluoroethylene Impregnated, Sintered
SAE AMS2491A-1967 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS2491C-1981 SURFACE TREATMENT OF POLYTETRAFLUOROETHYLENE Bonding Preparation
SAE AMS-DTL-23053/12A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene
SAE AS3298-2012 CUSHION – TUBE CLAMP SUPPORT, PTFE, INCH
SAE AMS3840D-1991 FABRIC, ASBESTOS Polytetrafluoroethylene Impregnated, Sintered
SAE AS2078-1991 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AS3298-1990 Cushion - Tube Clamp Support, PTFE, Inch
SAE AMS2491D-2003 Surface Treatment of Polytetrafluoroethylene Preparation for Bonding
SAE AS23053/14-2022 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE ETHYLENE-TETRAFLUOROETHYLENE FLUOROPOLYMER, SEMI-RIGID
SAE AMS3380B-1974 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
SAE AMS3654C-1993 Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AS23053/12-2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYTETRAFLUOROETHYLENE
SAE AMS3657C-1998 Polytetrafluoroethylene Extrusions Premium Strength, As Sintered
SAE AMS3668B-2011 POLYTETRAFLUOROETHYLENE MOLDINGS Premium Grade, As Sintered
SAE AMS3666D-1998 Polytetrafluoroethylene (PTFE) Sheet, Glass Cloth Reinforced
SAE AMS3666C-1991 POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED
SAE AMS3840B-1984 FABRIC, ASBESTOS Polytetrafluoroethylene Impregnated, Sintered
SAE AMS3668A-1976 POLYTETRAFLUOROETHYLENE MOLDINGS Premium Grade, As Sintered
SAE AMS3668-1967 POLYTETRAFLUOROETHYLENE MOLDINGS Premium Grade, As Sintered
SAE MA2178A-1991 Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 232 ℃, 10 500 kPa, Beam Seal, Straight to 90 °, Metric R(2001)
SAE AS23053/12B-2024 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYTETRAFLUOROETHYLENE
SAE AS23053/12A-2020 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE POLYTETRAFLUOROETHYLENE
SAE AMS3669G-2012 Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered
SAE AMS3668D-2010 Polytetrafluoroethylene (PTFE) Moldings, Premium Grade, As Sintered
SAE AMS3660D-2010 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3667C-1993 Polytetrafluoroethylene Sheet, Molded, General Purpose Grade, As Sintered
SAE MA2151/4-1991 CLAMP, SADDLE TYPE, CUSHIONED, PTFE, METRIC
SAE AMS3655B-1993 Tubing, Electrical Insulation Thin Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AMS3660E-2011 Polytetrafluoroethylene (PTFE) Moldings, General Purpose Grade, As Sintered
SAE AMS3380E-2019 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
SAE MA2171-1990 Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 204 ℃, 21,000 kPa, Lightweight Beam Seal, Straight to 45 Degrees, Metric
SAE AMS3840C-1985 FABRIC, ASBESTOS Polytetrafluoroethylene Impregnated, Sintered
SAE AMS3380D-2012 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
SAE AMS3380-1960 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
SAE AMS-DTL-23053/12B-2018 Insulation Sleeving, Electrical, Heat Shinkable, Polytetrafluoroethylene
SAE AMS3380C-1983 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
SAE AMS3380A-1965 HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced
SAE AMS3657C-1993 Polytetrafluoroethylene Extrusions, Premium Strength, As Sintered
SAE AIR4092-2011 INVESTIGATION OF PTFE "MELT" PHENOMENON FOR HIGH PRESSURE HOSES
SAE AS9956A-2008 Packing, Preformed (PTFE) AMS 3668, Seal
SAE AMS3655-1961 TUBING, ELECTRICAL INSULATION Thin Wall, Extruded Polytetrafluoroethylene
SAE AMS3660A-1976 POLYTETRAFLUOROETHYLENE MOLDINGS General Purpose Grade, As Sintered
SAE AS22759/15-2001 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, FEP-PVF2, LIGHT WEIGHT, SILVER-COATED HIGH STRENGTH COPPER ALLOY CONDUCTOR, 600-VOLT
SAE AMS3660-1966 POLYTETRAFLUOROETHYLENE MOLDINGS General Purpose Grade, As Sintered
SAE AMS-DTL-23053/12-1999 Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene
SAE AMS3660B-2011 POLYTETRAFLUOROETHYLENE MOLDINGS General Purpose Grade, As Sintered
SAE AS4502C-2007 HOSE ASSEMBLY, CONVOLUTED, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED CONDUCTIVE, FLARED, 45?TO 45
SAE AIR4092A-2013 Investigation of PTFE "Melt" Phenomenon for High Pressure Hoses
SAE AS2078A-2015 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE ARP1153A-1970 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing R(2001)
SAE AS22759/191-2010 Wire, Electrical, Polytetrafluoroethylene/Polymide Insulated, Smooth Surface, Light Weight,
SAE AMS3656E-1998 Polytetrafluoroethylene Extrusions Normal Strength, As Sintered
SAE AMS3653E-1993 Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethylene (PTFE)
SAE AS2078-2007 Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE)
SAE AS4503C-2007 Hose Assembly, Convoluted, Polytetrafluoroethylene, Metallic Reinforced Conductive, Flared, 45 Degrees to 90 Degrees

Korean Agency for Technology and Standards (KATS)

KS M 3522-1997 Polytetrafluoroethylene tapes
KS M 3344-2011 Polytetrafluoroethylene tubes
KS M 3522-1976 Polytetrafluoroethylene tapes
KS M 3346-1986 Polytetrafluoroethylene rods
KS M 3344-2016 Polytetrafluoroethylene tubes
KS M 3346-2011 Polytetrafluoroethylene rods
KS M 3344-1986 Polytetrafluoroethylene tubes
KS M 3522-2002 Polytetrafluoroethylene tapes
KS M 3345-2011 Polytetrafluoroethylene pipes
KS M 3523-2005 Polytetrafluoroethylene sheets
KS M 3345-1986 Polytetrafluoroethylene pipes
KS M 3522-2005 Polytetrafluoroethylene tapes
KS M 3523-1976 Polytetrafluoroethylene sheets
KS M 3523-2002 Polytetrafluoroethylene sheets
KS M 3354-2006(2016) Polytetrafluoroethylene coated dry film
KS M 3354-2006(2021) Polytetrafluoroethylene coated dry film
KS M 3068-2009 Method for determination of dimension of polytetrafluoroethylene parts
KS M 3354-1981 Polytetrafluoroethylene coated dry film
KS M 3354-2022 Polytetrafluoroethylene coated dry film
KS M 3354-2006 Polytetrafluoroethylene coated dry film
KS M 3068-2014 Method for determination of dimension of polytetrafluoroethylene parts
KS M 3355-2016 General tolerance for Polytetrafluoroethylene(Machine cut)
KS M 3355-1981(2011) General tolerance for Polytetrafluoroethylene(Machine cut)
KS M 3352-1980 Polytetrafluoroethylene powder for molding and extrusion materials
KS M 3033-2016 Testing methods for polytetrafluoroethylene molding powder
KS M 3355-1981 General tolerance for Polytetrafluoroethylene(Machine cut)
KS M 3033-1980 Testing methods for polytetrafluoroethylene molding powder
KS M 3069-2022 Testing methods for polytetrafluoroethylene aqueous dispersion
KS M 3033-2016(2021) Testing methods for polytetrafluoroethylene molding powder
KS M 3069-2016(2021) Testing methods for polytetrafluoroethylene aqueous dispersion
KS M 3033-2022 Testing methods for polytetrafluoroethylene molding powder
KS M 3033-2011 Testing methods for polytetrafluoroethylene molding powder
KS M 3520-1981 Unsintered polytetrafluoroethylene tapes for thread sealing
KS M 3069-2011 Testing methods for polytetrafluoroethylene aqueous dispersion
KS M 3069-1986 Testing methods for polytetrafluoroethylene aqueous dispersion
KS M 3520-2011 Unsintered polytetrafluoroethylene tapes for thread sealing
KS M 3520-2017(2022) Unsintered polytetrafluoroethylene tapes for thread sealing
KS M 3069-2016 Testing methods for polytetrafluoroethylene aqueous dispersion

Japanese Industrial Standards Committee (JISC)

JIS K 6890:1995 Polytetrafluoroethylene tubes
JIS K 6897:1995 Polytetrafluoroethylene pipes
JIS K 6889:1995 Polytetrafluoroethylene rods
JIS K 6888:1995 Polytetrafluoroethylene sheets
JIS K 6887:1995 Polytetrafluoroethylene tapes
JIS K 6895:1995 Method for determination of dimension of polytetrafluoroethylene parts
JIS K 6891:1995 Testing methods for polytetrafluoroethylene molding powder
JIS K 6893:1995 Testing methods for polytetrafluoroethylene aqueous dispersion
JIS K 6884:1971 General tolerance for polytetrafluoroethylene (Machine cut)
JIS K 6885:1995 Unsintered polytetrafluoroethylene tapes for thread sealing
JIS K 6885:2005 Unsintered polytetrafluoroethylene tapes for thread sealing

U.S. Military Regulations and Norms

ARMY MIL-P-48296 VALID NOTICE 1-1986 POLYTETRAFLUOROETHYLENE (TFE)
ARMY MIL-P-48296-1974 POLYTETRAFLUOROETHYLENE (TFE)

SCC

MIL MIL-P-48296-1974 POLYTETRAFLUOROETHYLENE (PTFE)
BS 6564-2:1985 Polytetrafluoroethylene (PTFE) materials and products.-Specification for fabricated unfilled polytetrafluoroethylene products
HOLDEN HN 1408-2009 GLASS REINFORCED POLYETRAFLOURO ETHYLENE
BS 6564-1-1.2:1989 Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion-Method of specifying
BS 6564-1-1.1:1989 Polytetrafluoroethylene (PTFE) materials and products. Polytetrafluoroethylene powders for moulding and extrusion-Specification
BS 3784:1964 Specification for polytetrafluoroethylene sheet
BS 6564-2:1991 Polytetrafluoroethylene (PTFE) materials and products-Specification for fabricated unfilled polytetrafluoroethylene products
MIL MIL-P-82810-1989 POLYTETRAFLUOROETHYLENE (PTFE) (NO S/S DOCUMENT)
BS 4893:1973 Specification for veneered polytetrafluoroethylene (PTFE) tape
BS 7485:1991 Method of specifying aqueous dispersions of polytetrafluoroethylene (PTFE) materials
HOLDEN HN 1410-2001 Polytetrafluoro Ethylene Thermo Plastic Compound
SAE AMSDTL23053/14B-2018 Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluorethylene Fluoropolymer, Semi-Rigid
SAE AMSDTL23053/14A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer, Semi-Rigid
BS 3873:1965 Specification for polytetrafluoroethylene moulded basic shapes
SAE AMSDTL23053/12B-2018 Insulation Sleeving, Electrical, Heat Shinkable, Polytetrafluoroethylene
SAE AMSDTL23053/12A-2012 Insulation Sleeving, Electrical, Heat Shrinkable, Polytetrafluoroethylene
MIL MIL-DTL-26633F-2014 Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen

PL-PKN

PN M77100 ArkusZ03-1974 House keeping utensils Methodes of PTFE coating tests Determination of adherence PTFE coating

American Society for Testing and Materials (ASTM)

ASTM D4969-17 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
ASTM D4969-02 Standard Specification for Polytetrafluoroethylene—(PTFE) Coated Glass Fabric
ASTM D1675-98 Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D1675-03 Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D1675-03(2011) Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D4441-15 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM D1675-18 Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D4441-20 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM D4441-98 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM D4441-04(2010) Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM D4441-04 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
ASTM D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film
ASTM D3308-12(2022) Standard Specification for PTFE Resin Skived Tape
ASTM D3308-12(2017) Standard Specification for PTFE Resin Skived Tape
ASTM D3308-01 Standard Specification for PTFE Resin Skived Tape

Standard Association of Australia （SAA）

AS 1195:1973 Polytetrafluoroethylene (PTFE) skived tape
AS 1196:1973 Polytetrafluoroethylene (PTFE) moulded sheet
AS 1197:1973 Polytetrafluoroethylene (PTFE) moulded basic shapes
AS 1198:1973 Polytetrafluoroethylene (PTFE) extruded rod and tube

GM Europe

GME B 040 2172-2011 PTFE grease
GME QK 000353-1983 Acetal-Homopolymerisat (POM) mit PTFE-Fasern Acetal-Homopolymer (POM) with PTFE Fibres German
GME STD 518839-1999 Anti-friction varnish 8839 Polyurethane bonded PTFE Glidlack 8839 Polyuretanbunden PTFE
GME QK 001342-2010 Polyamide 46 with PTFE English/German. 1st edition
GME STD 518868-2000 Plastic 8868 PTFE Plast 8868 PTFE English/Swedish

(U.S.) Ford Automotive Standards

FORD FLTM BO 006-03-2000 DETERMINATION OF FILLER CONTENT IN POLYTETRAFLUOROETHYLENE
FORD ESA-M4D465-A1-1988 TUBING, PTFE - GLASS SPHERE FILLED
FORD ESH-M8A6-A2-2003 BEARING, STEEL BACKED, TFE-PB IMPREGNATED BRONZE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D420-A-1984 ACETAL, HOMOPOLYMER-20% TETRAFLUOROETHYLENE (TFE) FILLED
FORD ESK-M3G157-A-1987 TAPE, POLYTETRAFLUOROETHYLENE, ONE SIDE, PRESSURE SENSITIVE
FORD S-M4D4765-A-2007 POLYTETRAFLUOROETHYLENE - ***TO BE USED WITH FORD WSS-M99P111-A***
FORD ESB-M4D169-A2-1978 ACETAL RESIN, 15% PTFE FILLED
FORD SA-M99P9100-A-1994 PTFE COATING, RESIN BONDED, PERFORMANCE
FORD ESF-M13P6-A-1979 PTFE DRY FILM LUBRICANT, PERFORMANCE SPECIFICATION

AIA/NAS - Aerospace Industries Association of America Inc.

NASM45595/2-1999 Washer@ Shouldered@ Polytetrafluoroethylene

GM North America

GM GMP.POM.032-2002 Acetal Homopolymer, 1.5% PTFE Powder
GM GMP.POM.011-2000 Acetal - Lubricated, 20% PTFE Filled
GM 9985189-1989 Adhesive, Tape, Teflon
GM 9985211-1989 Adhesive, Tape, Teflon
GM GMP.PA66.008-1999 Nylon 66 - 20% PTFE Filled, Heat Stabilized
GM GMP.POM.014-1994 Acetal - Homopolymer, 20% PTFE Fiber Filled
GM 9985311-1983 Tape, Teflon, 0.08 x 9.5 mm
GM GMP.PA66.082-1999 Nylon 66 - Aramid Fiber Reinforced, Teflon Filled, Heat Stabilized

American Welding Society (AWS)

WRC 442:1999 Polytetrafluoroethylene (PTFE) Gasket Qualification

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM45595/2-1999 Washer, Shouldered, Polytetrafluoroethylene
AIA/NAS NAS 1554-1997 Grommet, PTFE-Split Revision 3; FSC 5325
AIA/NAS NASM45595/2-2011 WASHER, SHOULDERED, POLYTETRAFLUOROETHYLENE (Rev 1)

U.S. Air Force

AIR FORCE A-A-58092 VALID NOTICE 1-2012 Tape, Antiseize, Polytetrafluorethylene

General Motors Corporation (GM)

GM 9985210-1998 Adhesive, Tape, Polytetrafluoroethylene Revision C
GM 9985968-1995 Multi-Purpose Lubricant with Teflon
GM 9985898-1992 Grease, PTFE Filled Bentone

International Federation of Trucks and Engines

NAVISTAR MPAPS K-15-5009-2015 Polytetrafluoroethylene (PTFE) Seal Material
NAVISTAR TMS 6029-1994 VOID - Hose, Teflon, Wire Reinforced

American National Standards Institute （ANSI)

ANSI/ASTM D5632:2001 Specification for Halon 1301, Bromotrifluoroemethane (CF3BR)
ANSI/ASTM D1675:2003 Test Methods for Polytetrafluoroethylene Tubing (10.01)
ANSI/ASTM D1675:2018 Standard Test Methods for Polytetrafluoroethylene Tubing

British Standards Institution (BSI)

BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene
BS 6564-3:1990(1999) Polytetrafluoroethylene (PTFE) materials and products — Part 3 : Specification for E glass fibre filled polytetrafluoroethylene
BS EN ISO 13000-1:2021 Plastics. Polytetrafluoroethylene (PTFE) semi-finished products. Requirements and designation

Aerospace Industries Association

AIA NASM45595/2-1999 Washer, Shouldered, Polytetrafluoroethylene FSC 5310

US-FCR

FCR FED PS3-66-1966 TFE-FLUOROCARBON (POLYTETRAFLUORO-ETHYLENE) RESIN SKIVED TAPE
FCR FED CS257-63-1963 TFE-FLUOROCARBON (POLYTETRAFLUORO-ETHYLENE) RESIN MOLDED BASIC SHAPES
FCR FED PS28-70-1970 GLASS STOPCOCKS WITH POLYTETRAFLUORETHYLENE (PTFE) PLUGS

United States Navy

NAVY MIL-P-24396 A-1994 PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE)
NAVY A-A-59474-1999 INSULATION TAPE, ELECTRICAL; HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE-SENSITIVE [Superseded: NAVY MIL-I-23594 C CANC NOTICE 1, NAVY MIL-I-23594 C, NAVY MIL-I-23594 B INT AMD 1, NAVY MIL-I-23594 B, NAVY MIL-I-23594 A (1), NAVY MIL-I-23594
NAVY A-A-59474 B-2010 INSULATION TAPE, ELECTRICAL; HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE-SENSITIVE