calibration ion

calibration ion, Total:111 items.

The international standard classification for "calibration ion" includes: Other products of the chemical industry , Metrology and measurement. Physical phenomena (Vocabularies) , Analytical chemistry in general , Chemical analysis .

The Chinese standard classification for "calibration ion" includes: Basic standards and general methods for catalyst , Basic standards and general methods , Electrochemical, thermochemistry and optical profile type analyzer , Chemical Measurement , Basic standards and general methods , Highway vehicle servicing installation .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 31195-2014 High chloride high ammonia wastewater―Determination of chemical oxygen demand―Chloride ion calibration method
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 26812-2011 Preparation method of reference solutions for the measurement of ion selective electrodes

Group Standards of the People's Republic of China

T/BEA 40002-2022 Calibration Specification for Microwave ECR Plasma Generator
T/BEA 43002-2023 Calibration Specification for Single Langmuir Probe Plasma Instrument
T/QGCML 306-2022 Cathode material for sodium ion battery
T/DCB 005-2023 Sodium-ion battery cathode materials Part 2: Polyanionic compounds
T/CIAPS 0029-2023 Lithium Manganese Iron Phosphate Cathode Materials for Lithium Ion Battery
T/BEA 40001-2022 Calibration specification for inductively coupled plasma generator
T/DCB 003-2023 Lithium-ion battery cathode material lithium iron manganese phosphate
T/ZZB 1302-2019 Water-based binders on cathode / anode in lithium-ion batteries
T/CIET 264-2023 Carbon management guide for lithium-ion battery cathode material companies

工业和信息化部

SJ/T 11794-2022 Test method for unbonded lithium of cathode materials used in lithium ion battery

National Metrological Technical Specifications of the People's Republic of China

JJF(冀)184-2021 Calibration specification for electronic temperature and pressure correction diaphragm gas meter
JJF 1159-2006 Calibration Specification for Quadrupole Inductively Coupled Plasma Mass Spectrometers
JJF(建材)148-2018 Calibration Specification for Distillation Instruments for Determination of Chloride Content in Cement
JJF(建材) 148-2018 Specification for calibration of distiller for determination of chloride ion content in cement
JJF(冀) 184-2021 Calibration specification for electronic temperature and pressure correction diaphragm gas meter

Taiwan Provincial Standard of the People's Republic of China

CNS 13331-1994 Sound Calibrator

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer

Professional Standard - Non-ferrous Metal

YSBS 15127-2011 Silicon steel calibration sample 50W600
YSBS 22002-2010 Cast Iron Calibration Sample (1)
YSBS 41306-2009 Stainless steel calibration sample
YSBS 45381-2020 Manganese Steel Reference Material
YSBS 45383-2020 Manganese Steel Reference Material
YSBS 451036-2022 Pig iron calibration sample 2#
YSBS 22003-2010 Cast Iron Calibration Sample (2)
YSBS 22004-2010 Cast Iron Calibration Samples (3)
YSBS 45382-2020 Manganese Steel Reference Material
YSBS 22001-2010 Pure iron calibration sample
YSBS 451033-2022 Pig iron calibration sample 1#

机械电子工业部

JB 5232-1991 Preparation method of calibration solution for ion selective electrode measurement

Professional Standard - Aviation

HB 2650-1976 Adjustable Drill Chuck

Professional Standard - Traffic

JT/T 639-2005 Autobody and frame alignment machine

RU-GOST R

GOST 34775-2021 Prepared (corrected) water for the manufacture of alcoholic beverages. Determination of the content of calcium, magnesium, sodium, potassium, ammonium ions by ion chromatography
GOST R ISO 11171-2012 Hydraulic fluid power. Calibration of automatic particle counters for liquids

British Standards Institution (BSI)

BS ISO 20411:2018 Surface chemical analysis. Secondary ion mass spectrometry. Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
BS 4161-8:1987(1999) Gas meters — Part 8 : Specification for electronic volume correctors
BS ISO 11171:2000 Hydraulic fluid power - Calibration of automatic particle counters for liquids
BS ISO 11171:2020 Hydraulic fluid power. Calibration of automatic particle counters for liquids
BS ISO 11171:2010 Hydraulic fluid power. Calibration of automatic particle counters for liquids
BS ISO 11171:2016 Hydraulic fluid power. Calibration of automatic particle counters for liquids
BS ISO 5776:2022 Graphic technology. Symbols for text proof correction
BS 7825-3.1:1997 Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties
BS ISO 13084:2011 Surface chemical analysis. Secondary-ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BS 2000-0-0.4:1996 Barometric pressure corrections
BS EN 61315:2006 Calibration of fibre-optic power meters

International Organization for Standardization (ISO)

ISO 20411:2018 Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
ISO 2719:2016/Amd 1:2021 Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction
ISO 14911:1998 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water
ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks

Japanese Industrial Standards Committee (JISC)

JIS K 0158:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry

SCC

AWWA JAW11040 Journal AWWA — Temperature and Ionic Strength Corrections to the Langelier Index -- Revisited
BS 4161-8:1987 Gas meters-Specification for electronic volume correctors
BS EN ISO 10304-2:1997 Water quality. Determination of dissolved anions by liquid chromatography of ions-Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
BS EN ISO 10304-1:1995 Water quality. Determination of dissolved anions by liquid chromatography of ions-Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions. Method for water with low contamination
BS ISO 19012-2:2009 Optics and photonics. Designation of microscope objectives-Chromatic correction

American Society for Testing and Materials (ASTM)

ASTM C1590-04 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM C1590-04(2009) Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM C1590-04(2014) Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM C1590-21 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
ASTM E766-98(2008)e1 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope
ASTM D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
ASTM D8149-17 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

ESDU - Engineering Sciences Data Unit

ESDU 83044-2014 Plasticity correction factors for plate buckling
ESDU 83044-1983 Plasticity correction factors for plate buckling.
ESDU 66016 A-1978 Bandwidth correction.

PL-PKN

PN P55036-1972 Correction signs and execu?iono? correction
PN Z84221-1985 Correctional ocular holders
PN K91066-1991 Wagons. Axle guard. Dimensions

IT-UNI

UNI 5041-1969 Print proof correction

American Society of Mechanical Engineers (ASME)

ASME STP-PT-073-2014 STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES

KR-KS

KS G 2306-2018(2023) Correction fluids

Korean Agency for Technology and Standards (KATS)

KS G 2306-2018 Correction fluids
KS A 0104-2006 Symbols for text correction
KS A 0104-1985 Symbols for text correction
KS I ISO 14911:2009 Water quality-Determination of dissolved Li+, Na+,NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water
KS M ISO 8222:2003 Petroleum measurement systems-Calibration-Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 8222:2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks

RO-ASRO

STAS 7446-1966 Calibration equipment
STAS 11200/483-1982 GRAPHICAL SYMBOL FOR PLASMA TORCH CONNECTION + NOZZLE (POSITIVE SUPPLY)

SE-SIS

SIS 03 62 01-1963 Proof correclions
SIS 03 62 02-1964 Illustration proof corrections
SIS MNC 1104-1970 Correction of Rockwell hardness values

ZA-SANS

SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination

API - American Petroleum Institute

API MPMS 11.1 VOL VI-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume VI Table 24C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL III-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume III Table 6C - Volume Correction Factors for Individual and Special Applications Volume Correction to 60 Degrees F Against Thermal Expansion Coefficients at 60 Degre
API MPMS 11.1 VOL IX-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IX Table 54C - Volume Correction Factors for Individual and Special Applications Volume Correction to 15 Degrees C Against Thermal Expansion Coefficients at 15 Degre
API MPMS 11.1 VOL IV-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Vo

American Gas Association

AGA GMM-15-1999 Gas Measurement Manual - Part 15: Electronic Corrector (XQ9901)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4076-1997 Potential Correction Factors for Interpreting CO2 Measurements in Buildings
ASHRAE 4158-1998 Environmental Correction Factors for Predicting Room Sound Pressure Levels (RP-755)

IN-BIS

IS 4175-1981 Calibration Fluid Specifications
IS 3756-1966 Gear calibration method

SAE - SAE International

SAE AS5823B-2012 CARD-COMPASS CORRECTION
SAE ARP2B-1996 Horsepower Correction Formulae
SAE AS5823-1998 Card-Compass Correction
SAE ARP2C-2018 Horsepower Correction Formulae

American National Standards Institute （ANSI)

ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements

Association Francaise de Normalisation

NF S31-139:1988 ACOUSTICS. SOUND CALIBRATORS.
NF M08-005:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks.

Society of Automotive Engineers (SAE)

SAE ARP2-1943 HORSEPOWER CORRECTION FORMULAE
SAE ARP2B-2012 Horsepower Correction Formulae
SAE ARP2A-2011 HORSEPOWER CORRECTION FORMULAE

(U.S.) Ford Automotive Standards

FORD EFX-1994 POWER FACTOR CORRECTION

German Institute for Standardization

DIN 4054:1977 Correction of waterways; terms
DIN EN ISO 14911:1999 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water (ISO 14911:1998); G

GSO

GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
OS GSO ISO 13084:2013 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
BH GSO ISO 13084:2016 Surface chemical analysis -- Secondary-ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer

Others: Correction,Chlorine correction,Instrument Calibration,Pyrene correction,Calibration peak,curve correction,hydraulic correction,Element correction,times correction,calibration analysis,calibration sample,calibration solution,Calibration set,Fluorescence correction,penetration correction,Chlorine calibration,Cross Calibration Set Calibration Set,Calibration Curve Recalibration,calibration ion