How to Test Saturation Vapor Pressure

How to Test Saturation Vapor Pressure, Total:94 items.

The international standard classification for "How to Test Saturation Vapor Pressure" includes: Vacuum technology , Crude petroleum , Analytical chemistry in general , Farming and forestry .

The Chinese standard classification for "How to Test Saturation Vapor Pressure" includes: Vacuum technique and equipment , Vacuum grease and anti-rust grease , Fuel oil , Crude petroleum , Basic standards and general methods , Pesticide management and application method .

Professional Standard - Aerospace

QJ 2667-1994 Determination Method of Saturated Vapor Pressure of Vacuum Greese

Professional Standard - Petrochemical Industry

SH/T 0293-1992 Determination Method of Saturated Vapor Pressure of Vacuum Greese

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 257-1964 Determination of saturated vapor pressure of engine fuels(Reid method)
GB/T 11059-1989 Crude oil--Determination of saturated vapour pressure--Reference method
GB/T 11059-2003 Crude oil - derermination of saturated vapour pressure - Reference methods

未注明发布机构

DIN EN 13016-1 E:2016-11 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
DIN EN 13016-1:2000 Liquid Petroleum Products – Vapor Pressure – Part 1: Determination of Saturated Vapor Pressure Foot Air Condition (ASVP)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35930-2018 Determination of vapor pressure of chemical products—Thermogravimetry method

Professional Standard - Agriculture

NY/T 1860.14-2010 Guidance on the determination of physico-chemical properties of pesticides—Part 14：Saturated vapour pressure
NY/T 1860.14-2016 Guidelines on the determination of physico-chemical properties of pesticides Part 14:Saturated vapour pressure

Professional Standard - Machinery

JB/T 11942-2014 The Technical Conditions and Test Evaluation Method for Auto Saturated Vapor Pressure Tester - Rader Method

SCC

BS EN 13016-1:2000 Liquid petroleum products. Vapour pressure-Determination of air saturated vapour pressure (ASVP)
NS-EN 13016-1:2000 Liquid petroleum products — Vapour pressure — Part 1: Determination of air saturated vapour pressure (ASVP)
DANSK DS/EN 13016-1:2018 Liquid petroleum products – Vapour pressure – Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
AENOR UNE-EN 13016-1:2018 Liquid petroleum products - Vapor pressure - Part 1: Determination of air saturated vapor pressure (ASVP) and calculated dry vapor pressure equivalent (DVPE)
BS 2000-394:1999 Methods of test for petroleum and its products-Determination of air saturated vapour pressure (ASVP)
NS-EN 13016-1:2007 Liquid petroleum products — Vapour pressure — Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
NS-EN 13016-1:2018 Liquid petroleum products — Vapour pressure — Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
UNE-EN 13016-1:2001 LIQUID PETROLEUM PRODUCTS. VAPOUR PRESSURE. PART 1: DETERMINATION OF AIR SATURATED VAPOUR PRESSURE (ASVP).
DIN EN 13016-1 E:2016 Draft Document - Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German and English version prEN 13016-1:2016
DANSK DS/IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
05/30143111 DC EN 13016-1. Liquid petroleum products. Vapour pressure. Part 1. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS PD IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
AWWA ACE93200 Pilot Testing — When and How? Utility Perspective
CEI EN 60068-2-66:1997 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
DANSK DS/EN 60068-2-66:1997 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

BSI

BS EN 13016-1:2024 Liquid petroleum products. Vapour pressure-Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

IN-BIS

IS 8867-1978 Saturated vapor pressure and test pressure of low-pressure liquefiable gases in cylinders

German Institute for Standardization

DIN EN 13016-1:2023-05 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German and English version prEN 13016-1:2023 / Note: Date of issue 2023-04-14*Intended as ...
DIN EN 13016-1:2018-06 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2018
DIN EN 13016-1:2024 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
DIN EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); English version of DIN EN 13016-1:2007-11
DIN EN 13016-1:2023 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German and English version prEN 13016-1:2023
DIN EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE); German version EN 13016-1:2018

British Standards Institution (BSI)

BS EN 60068-2-66:1995 Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS EN 13016-1:2018 Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS EN 13016-1:2018*BS 2000-394:2018 Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS EN 13016-3:2018*BS 2000-619:2018 Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS EN 13016-1:2007 Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
PD IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
18/30376688 DC PD IEC/TS 63141. Damp heat, steady state (unsaturated pressurized vapour with air)
BS 5342:1985 Specification for rubber hoses for high-pressure saturated steam
BS 5122:1986 Specification for rubber hoses for low-pressure and medium-pressure saturated steam

Standard Association of Australia （SAA）

AS 60068.2.66:2003 Environmental testing - Tests - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

GOST

GOST 34429-2018 Liquefied hydrocarbon gases. Method for determination of saturated vapour pressure

Korean Agency for Technology and Standards (KATS)

KS M 3052-1990(2001) TESTING METHOD FOR GAS TRANSMISSION RATE THROUGH PLASTIC FILM AND SHEETING
KS M 1211-2002(2007) TESTING METHODS OF CAUSTIC SODA
KS M 1211-1985 TESTING METHODS OF CAUSTIC SODA
KS M 7053-1973(2002) TESTING METHOD FOR PH OF PAPER AND PAPERBOARD
KS M 3858-1988(1998) TESTING METHODS FOR PHOTOGRAPHIC GRADE CHEMICALS
KS M 6887-1982 TESTING METHOD FOR GRAIN CRACK OF LEATHER (BY BALL-BURSTING TESTER)
KS M 3062-2004(2009) Testing method for stiffness properties of plastics as a function of temperature by means of a torsion test
KS M 6887-1997(2002) TESTING METHOD FOR GRAIN CRACK OF LEATHER (BY BALL-BURSTING TESTER)
KS R 1088-2004 Automotive parts－Brake linings and disc brake pads－Compressibility test procedure
KS R 1088-1989 Automotive parts－Brake linings and disc brake pads－Compressibility test procedure
KS I 2208-2008(2013) Methods for determination of carbon dioxide in air
KS R 6003-1995 TESTING METHOD OF DUMP TRUCKS
KS B 6061-2003(2008) METHODS OF TEST FOR CASH REGISTERS
KS M 7036-2000(2005) LABORATORY PROCESSING OF PULP (BEATER METHOD)
KS R 6003-1980 TESTING METHOD OF DUMP TRUCKS
KS M 7081-2001 Testing method for surface strength of paper and paperboard
KS M 5980-1995(2007) SAG RESISTANCE OF PAINTS USING A MULTINOTCH APPLICATOR
KS F 8101-2001(2011) STANDARD FORM OF SPECIFICATIONS AND TESTING METHODS OF ASPHALT FINISHERS
KS R 9229-2005 Railway rolling stock－Radiator element－Inspection methods
KS R 1082-2003(2008) TEST CODE OF PADDING MATERIAL FOR AUTOMOBILE SEATS
KS B 0509-1994(1999) METHOD OF GASEOUS CORROSION TEST FOR BRAZED JOINT
KS R 1103-2006(2011) Test methods of hot water heaters for automobiles

Association Francaise de Normalisation

NF EN 13016-1:2018 Liquid petroleum products - Vapor pressure - Part 1: determination of saturated vapor pressure in air (PVSA) and calculated equivalent dry vapor pressure (PVSE)
NF M07-079-1*NF EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1 : determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
NF M07-079-1:2007 Liquid petroleum products - Vapour pressure - Part 1 : determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE).
NF C20-766*NF EN 60068-2-66:1995 Environmental testing. Part 2 : test methods. Test Cx : damp heat, steady state (unsatured pressurized vapour).

ES-UNE

UNE-EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

Lithuanian Standards Office

LST EN 13016-1-2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

European Committee for Standardization (CEN)

EN 13016-1:2018 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)

AENOR

UNE-EN 13016-1:2008 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
UNE-EN 60068-2-66:1997 ENVIRONMENTAL TESTING. PART 2: TEST METHODS. TEST CX: DAMP HEAT, STEADY STATE (UNSATURATED PRESSURIZED VAPOUR).

Danish Standards Foundation

DS/EN 13016-1:2007 Liquid petroleum products - Vapour pressure - Part 1: Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
DS/EN 60068-2-66:1998 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

GSO

GSO IEC 60068-2-66:2015 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
OS GSO IEC 60068-2-66:2015 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
BH GSO IEC 60068-2-66:2016 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

GOSTR

GOST 28656-2019 Liquefied hydrocarbon gases. Calculation method for determination of saturated vapour density and pressure

RU-GOST R

GOST 28656-1990 Liquefied hydrocarbon gases. Calculation method for density and saturated vapours pressure
GOST EN 13016-1-2013 Liquid petroleum products. Part 1. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
GOST 1756-2000 Petroleum products. Determination of saturated vapours pressure
GOST 1756-1952 Petroleum products. Methods for determination of saturated vapours pressure
GOST ISO 8973-2013 Liquefied petroleum gases. Calculation of density and saturated vapour pressure
GOST R EN 13016-1-2008 Liquid petroleum products. Part 1. Determination of air saturated vapour pressure (ASVP)

International Electrotechnical Commission (IEC)

IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)

TH-TISI

TIS 1144-2009 Rubber hoses for saturated steam

VN-TCVN

TCVN 7699-2-66-2007 Environmental testing.Part 2-66: Tests.Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

Japanese Industrial Standards Committee (JISC)

JIS C 60068-2-66:2001 Environmental testing -- Part 2: Test methods -- Test Cx: Damp heat, steady state (unsaturated pressurized vapour)
JIS C 0096:2001 Environmental testing -- Part 2: Test methods -- Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

PL-PKN

PN C94250-42-1986 Rubber hoses Pressure hoses with textile reinforcement for satorated water vapeur

Others: How to Test Saturation Vapor Pressure