porous structure

porous structure, Total:161 items.

The international standard classification for "porous structure" includes: Hulls and their structure elements , Concrete and concrete products .

The Chinese standard classification for "porous structure" includes: General structure of ship hull , Basic standards and general methods , Concrete product .

Professional Standard-Ships

CB* 3184-1983 Hull structure flow holes, ventilation holes, through welding holes
CB/T 3184-2008 Hull Structure - Drain Hole, Air Hole, Clearance Hole and Scallop for Seal Welding

Professional Standard - Aviation

HB 0-12-1974 lightening hole in metal structure
HB 0-12-1983 Metal structure lightening hole

Professional Standard - Construction Industry

JG/T 352-2012 Hollow cast-in-place concrete structure into Kong Xinmo
JGJ 137-2001（条文说明） Technical code for perforated brick masonry structures(explanation)
JGJ 137-2001 Technical code for perforated brick masonry structures
JG/T 352-2017 Pore-forming mould for concrete structure

Group Standards of the People's Republic of China

T/ZS 0557-2023 Technical specification for deformation detection of existing prefabricated steel structure residential structures
T/CECS 1540-2024 Technical specification for application of steel structure in renovation of existing building structures
T/QGCML 2923-2024 Capacitors with explosion-proof structure

工业和信息化部

HG/T 5764-2020 Determination of pore structures of petroleum refining catalysts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 51087-2015 Design code for renovation and strengthening of existing shipyard marine structure

Jilin Provincial Standard of the People's Republic of China

DB22/T 5067-2007 Technical regulations for concrete porous brick masonry structures

Hubei Provincial Standard of the People's Republic of China

DB42/ 371-2006 Technical code for concrete cellular brick masonry structures

Taiwan Provincial Standard of the People's Republic of China

CNS 9206-1982 Method for Determining Intercommunicating Porosity of Sintered Metal, Oil Impregnated

GM Europe

GME QK 000516-2011 PUR elastomers with cellular structure (revision 4; English/German)
GME QK 000760-2006 PUR with Cell Structure (English/German)

RU-GOST R

GOST 6393-1973 Round nuts with set pin holes in side, product grade A. Design and dimensions
GOST 28941.25-1991 Flare fittings. Snugle plugs. Construction
GOST 20865-1981 Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions
GOST 20867-1981 Adjustings fixturing ring with a slit and threaded holes. Design and dimensions
GOST 11607-1982 Plain bearing split bearing blocks with two bolt holes. Design and dimensions
GOST 11608-1982 Plain bearings split bearing blocks with four bolt holes. Design and dimensions
GOST 20866-1981 Adjusting fixturing ring support with flats and threaded holes. Design and dimensions
GOST 20862-1981 Adjusting fixturing hexahedral supports with theaded end and hole. Design and dimensions
GOST 11524-1982 Plain bearings flange bearing bloks with four bolt holes. Design and dimensions
GOST 11521-1982 Plain bearings pillow blocks with two bolt holes. Design and dimensions
GOST 24533-1980 Pin-hole punches. Design and dimensions
GOST 11522-1982 Plain bearings flange bearing bloks with tow bolt heles. Design and dimensions
GOST 20864-1981 Adjusting fixturing ring supports with slit, theaded end and hole. Design and dimensions
GOST 18818-1980 Bolsters with one aperture. Design and dimensions
GOST 16642-1980 Female dies with square hole. Construction and dimensions
GOST 18819-1980 Bolsters with two apertures. Design and dimensions
GOST 20863-1981 Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions
GOST 11609-1982 Plain bearings split angle bearing blocks with two bolt holes. Design and dimensions
GOST 18822-1980 Bolsters with five apertures. Design and dimensions
GOST 18821-1980 Bolsters with four apertures. Design and dimensions
GOST 12217-1966 Holding devices. Plugs for lubrication holes. Design
GOST 12203-1966 Holding devices. Round blind nuts. Design
GOST 18820-1980 Bolsters with three apertures. Design and dimensions
GOST 16638-1980 Reinforced female dies with round hole. Construction and dimensions
GOST 18770-1980 Locators with threaded bore. Design and dimensions
GOST 24534-1980 Bushes for pin-hole punches. Design and dimensions
GOST 18771-1980 Locators with a stepped bore. Design and dimensions
GOST 16648-1980 Holders with two mounting holes. Construction and dimensions
GOST 19067-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes. Design and dimensions
GOST 16655-1980 Holders for quick-changing female dies with square and oblong holes. Construction and dimensions
GOST 13897-1968 Check square countersunk headed screws with shortened cylindrical end. Design
GOST 16650-1980 Holders with four mounting holes. Construction and dimensions
GOST 18512-1973 End caps with recess for cup seal. Design and dimensions
GOST 16646-1980 Female dies with elongated oblong hole. Construction and dimensions
GOST 16637-1980 Female dies with round hole. Construction and dimensions
GOST 19397-1974 Net-shaped vents for core boxes. Design and dimensions
GOST 19068-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only. Design and dimensions
GOST 18828-1973 Ring single-ended square spanners. Design and dimensions

European Committee for Standardization (CEN)

EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
CEN/TS 17440:2020 Assessment and retrofitting of existing structures

German Institute for Standardization

DIN EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners; German version EN 14250:2010
DIN 440:2001 Washers - With square hole, especially for timber constructions
DIN 440:2023-03 Washers with square hole, especially for timber constructions / Note: Date of issue 2023-01-27*Intended as replacement for DIN 440 (2001-03).
DIN 4213 E:2001-05 Application in structures of prefabricated components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN 4213:2015 Application in structures of prefabricated components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 14250:2010-05 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners; German version EN 14250:2010
DIN 4213 E:2014-01 Application in structures of prefabricated components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement; German version EN 1520:2011 / Note: Under certain conditions, DIN EN 1520 (2003-07) remains valid alongside this ...
DIN 440:1974 Washers - With square hole, especially for timber constructions
DIN 440:2001-03 Washers - With square hole, especially for timber constructions / Note: To be replaced by DIN 440 (2023-03) (in preparation).
DIN EN 14250 E:2001-11 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DIN CEN/TS 17440:2020 Assessment and retrofitting of existing structures
DIN CEN/TS 17440:2020-10 Assessment and retrofitting of existing structures; German version CEN/TS 17440:2020

CEN - European Committee for Standardization

EN 14250:2004 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

Association Francaise de Normalisation

NF P21-387:2005 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners.
NF P21-387*NF EN 14250:2010 Timber structures - Product requirements by prefabricated structural members assembled with punched metal plate fasteners
NF EN 1520:2011 Prefabricated open-structure lightweight aggregate concrete components with structural and non-structural reinforcement
NF P95-106:1993 Ouvrages d'art - Réparation et renforcement des ouvrages en béton et en maçonnerie - Spécifications relatives aux fondations des ouvrages.
XP CEN/TS 17440:2020 Évaluation et rénovation des structures existantes
XP P06-008*XP CEN/TS 17440:2020 Assessment and retrofitting of existing structures

CZ-CSN

CSN 72 2611 Cast.2-1989 Brick elements for vertical structures. Perforated brick
CSN 72 2611 Cast.3-1989 Brick elements for vertical structures. Perforated brick
CSN 72 2611 Cast.1-1989 Brick elements for vertical structures Perforated modular brick
CSN 72 2628-1987 Brick products for vertical structures. Perforated bricks

Society of Automotive Engineers (SAE)

SAE AMS-P-RF46194B-2016 Foam, Rigid, Structural, Closed Cell
SAE AMS-P-RF46194A-2003 Foam, Rigid, Structural, Closed Cell

U.S. Military Regulations and Norms

ARMY MIL-PRF-46194 A (1)-1999 FOAM, RIGID, STRUCTURAL, CLOSED CELL
ARMY MIL-PRF-46194 A-1997 FOAM, RIGID, STRUCTURAL, CLOSED CELL

IPC - Association Connecting Electronics Industries

IPC TM-650 2.1.3A-1976 Plated Through Hole Structure Evaluation
IPC 4761 CD-2006 Design Guide for Protection of Printed Board Via Structures

SCC

SAE AMSPRF46194A-2003 Foam, Rigid, Structural, Closed Cell
DANSK DS/ISO 13822:2010 Bases for design of structures - Assessment of existing structures
09/30196396 DC BS ISO 13822. Bases for design of structures. Assessment of existing structures
NS-EN 14250:2004 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners
NS-EN 14250:2010 Timber structures — Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DANSK DS/EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DANSK DSF/DS 11990:2022 Structural appraisal of existing constructions
NS 3439:1990 Factory made trussed rafters and other timber structures with punched metal plate fasteners
DIN 4213 E:2014 Draft Document - Application in structures of prefabricated components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
AWWA JAW41438 Journal AWWA — GAC: Pore Structure Versus Dye Adsorption
NS-EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
BHMA A156.34-2016 BORED LOCKS AND MORTISE LOCKS WITH LIGATURE RESISTANT TRIM
AWWA ACE94181 Granular Activated Carbon, Activation and Regeneration: Pore Structure
DANSK DS/EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN 14250 E:2009 Draft Document - Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners; German version FprEN 14250:2009
DANSK DS/CEN/TS 17440:2020 Assessment and retrofitting of existing structures
BS PD CEN/TS 17440:2020 Assessment and retrofitting of existing structures
SN-CEN/TS 17440:2020 Assessment and retrofitting of existing structures
07/30152878 DC BS EN 14250. Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DIN 440 E:2023 Draft Document - Washers with square hole, especially for timber constructions

SAE - SAE International

SAE AMS-PRF-46194B-2016 Foam@ Rigid@ Structural@ Closed Cell

Building Officials and Code Administrators International(U.S.)

BOCA CHAPTER 34 NBC-1996 Existing Structures
BOCA NBC COMM V2 CH 34-1999 Existing Structures
BOCA CHAPTER 34 NBC-1993 Existing Structures
BOCA NBC COMM96 V2 CH 34-1996 Existing Structures
BOCA CHAPTER 34 NBC COMM V2-1993 Existing Structures
BOCA CHAPTER 34 NBC-1999 Existing Structures

GSO

OS GSO ISO 13822:2012 Bases for design of structures – Assessment of existing structures
BH GSO ISO 13822:2013 Bases for design of structures – Assessment of existing structures

International Organization for Standardization (ISO)

ISO 13822:2001 Bases for design of structures - Assessment of existing structures
ISO 13822:2010 Bases for design of structures - Assessment of existing structures

Danish Standards Foundation

DS/ISO 13822:2010 Bases for design of structures - Assessment of existing structures
DS/EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
DS/EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

AASHTO - American Association of State Highway and Transportation Officials

DIVISION II SEC 2-1996 Removal of Existing Structures
HB-17 DIVISION II SEC 2-2002 Division II Construction - Removal of Existing Structures

The American Road & Transportation Builders Association

AASHTO HB-17 DIVISION II SEC 2-2002 Division II Construction - Removal of Existing Structures

Korean Agency for Technology and Standards (KATS)

KS D 0050-1990(2005) Method for determination of intercommunicating porosity of sintered metal,oil impregnated
KS F 1554-2021 Standard terminology related to wood —Nail and fasteners for wood structure

Spanish Association for Standardization (UNE)

UNE 41808:2013 Existing wood structures. Graphic representation system of the constructive state of the existing wood structures.
UNE-EN 14250:2005 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
UNE-EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
UNE-EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
UNE-EN 16603-32-03:2014 Space engineering - Structural finite element models (Endorsed by AENOR in October of 2014.)

PL-PKN

PN E05003-03-1989 Lightning protection of structures Particular requirements for endangered structures
PKN-CEN/TS 17440-2021-04 E Assessment and retrofitting of existing structures

AIA/NAS - Aerospace Industries Association of America Inc.

NASM20604-1998 Rivet@ Blind@ Nonstructural@ Universal Head@ Class 1
NASM20605-2015 RIVET@ BLIND@ NONSTRUCTURAL@ 100° FLUSH HEAD (Rev 3)
NASM20605-1998 Rivet@ Blind@ Nonstructural@ 100 Degrees Flush Head@ Class 2
NASM20605-2011 RIVET@ BLIND@ NONSTRUCTURAL@ 100° FLUSH HEAD (Rev 2)
NASM20600-1999 Rivet@ Blind@ Structural Pull Stem@ Self-Plugging@ Protruding Head@ Type II

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM20605-2011 RIVET, BLIND, NONSTRUCTURAL, 100° FLUSH HEAD
AIA/NAS NASM20605-2015 RIVET, BLIND, NONSTRUCTURAL, 100° FLUSH HEAD (Rev 3)

Lithuanian Standards Office

LST EN 14250-2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
LST EN 1520-2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement

AREMA - American Railway Engineering and Maintenance-of-Way Association

CHAPTER 15/PART 7-1998 Existing Bridges (Volume 2/Structures)
CHAPTER 15/PART 7-2000 Existing Bridges (Volume 2/Structures)
CHAPTER 15/PART 7-2001 Existing Bridges (Volume 2/Structures)

ESDU - Engineering Sciences Data Unit

ESDU 74025 B-1992 Natural frequencies of box structures.
ESDU 74025 B-2011 Natural frequencies of box structures

ECSS - European Cooperation for Space Standardization

E-ST-32-03C-2008 Structural finite element models (First Issue)

British Standards Institution (BSI)

PD CEN/TS 17440:2020 Assessment and retrofitting of existing structures
BS EN 14250:2010 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 14250:2004 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners
BS EN 14250:2005 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners

American Society of Civil Engineers (ASCE)

ASCE 11-99-2000 Guideline for Structural Condition Assessment of Existing Buildings

Aerospace Industries Association

AIA NASM8814-2001 Rivets, Blind, Nonstructural Type FSC 5320; Rev. 1
AIA NASM20605-2000 Rivet, Blind, Nonstructural, 100 Degree Flush Head FSC 5320

Construction department of Hebei province

DB13(J)/T 46-2004 Technical specification for concrete porous brick masonry structure
DB13(J) 49-2005 Technical specification for masonry structure of sintered non-clay porous brick sandwich wall

US-FCR

FCR COE ETL 1110-2-321-1993 RELIABILITY ASSESSMENT OF NAVIGATION STRUCTURES STABILITY OF EXISTING GRAVITY STRUCTURES

HU-MSZT

MSZ 225-1972 Nut structural length and effective length

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 3750.9:2009(R2019) Paints for steel structures - Organic zinc-rich primer

Others: Pore structure,How many pieces of six-hole plates are there in a box,How many pieces are there in a box of six-hole plates,There are 96 and 24 well plates,Pore structure,What 48-well plates are there?,What are the types of inner hole measurement,porous structure,mesoporous structure,Hole network structure,Hierarchical Pore Structure,What is the use of six-well plate,hole has,How many structures do they have,What are the structural software,Obturator structure,Closed cell structure,Does the secondary structure have internal and external origin?