Other Mass Spec Equipment

Other Mass Spec Equipment, Total:85 items.

The international standard classification for "Other Mass Spec Equipment" includes: Acoustics and acoustic measurements .

The Chinese standard classification for "Other Mass Spec Equipment" includes: Acoustic Measurement , Optical communication equipment , Materials .

Professional Standard - Agriculture

农业农村部公告第197号-9-2019 Identification and confirmation of 150 veterinary drugs and other compounds in blood and urine of livestock and poultry by liquid chromatography-high resolution tandem mass spectrometry
农业农村部公告第197号-10-2019 Determination of 160 veterinary drugs and other compounds in blood and urine of livestock and poultry by liquid chromatography-tandem mass spectrometry

Professional Standard - Machinery

JB 8616-1997 Safety protection of copying machinery (including other office equipment)

未注明发布机构

DIN VDE 0100-551:1997 Low-voltage electrical installations - Part 5-55: Selection and erection of electrical equipment - Other equipment - Clause 551: Low-voltage generating sets

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17697-2014 Acoustics―Determination of sound power radiated into a duct by fans and other air-moving devices―In-duct method
GB 16895.20-2003 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 55: Other equipment Section 551: Low-voltage generating sets

Professional Standard - Post and Telecommunication

YDN 028-1997 Protection of Fiberoptic Cable System and Equipment - Linear Reuse Section, Self-recovery Ring and Other Types of Structures (Tentative Specifications)

Professional Standard - Railway

TB/T 2328.17-1992 Test Method for the Content of Railway Ballast Clay and other Impurities

Professional Standard-Ships

CB/T 3613-1994 Installation quality requirements for navigation equipment and its accessories

International Organization for Standardization (ISO)

ISO 29464:2011 Cleaning equipment for air and other gases - Terminology
ISO 3077:1984 Short link chain for lifting purposes; Grade T (8), calibrated, for chain hoists and other lifting appliances

German Institute for Standardization

DIN 24500-15:1972 Rolling mill equipment, rolling mills for steel, designation for other equipment
DIN 19217:1998 Measuring systems for liquids other than water - Definitions, requirements and testing (OIML R 117:1995)
DIN 51872-4:1990 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure

Association Francaise de Normalisation

NF X44-001:1981 Cleaning equipment for air and other gases. Vocabulary.
NF S93-012:1997 Conical fittings with a 6 % (LUER) taper for syringes, needles and certain other medical equipment. Lock fittings.
NF C58-633:2004 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications.
NF G52-202:1976 Leathers and hides. Chemical testing of leather. Determination of water and other volatile substances.
NF M88-790:2012 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft.

CH-SNV

VSM 18644-1964 Gas welding equipment hoses for nozzles and other gas consuming equipment

YU-JUS

JUS N.K5.055-1982 Low vo/tage control $witehes. Additional reguirements for pilot switches
JUS N.N0.900-1987 Radio-frequency interferences. Household electrical appliances, equipment and other electrical appara- tus. Limit values
JUS IEC 599:1994 Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in service
JUS Z.S2.309-1984 Roadsigns. Additional panels with symbols. Design of signs

National Sanitation Foundation (NSF)

NSF 50-2011 Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities
NSF 50 ADD-2011 Equipment for Swimming Pools, Spas, Hot Tubs and Other Recreational Water Facilities

British Standards Institution (BSI)

PD R210-008-2002 Guide to EMC conformity of apparatus designed for military and other purposes
BS EN 1865:2000 Specifications for stretchers and other patient handling equipment used in road ambulances
BS EN 20594-1:1987 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - General requirements
BS 5306-0:2011 Fire protection installations and equipment on premises. Guide for selection of installed systems and other fire equipment

ES-AENOR

UNE 68-069 Pt.0-1990 General nature of technical safety adjustments for forestry and agricultural tractors and other equipment
UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
UNE 59-013-1986 Determination of water and other volatile substances in leather

American National Standards Institute （ANSI)

ANSI/NSF 50(i67)-2011 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i71)-2011 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i85)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i87r1,r2,and r3)-2013 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i82)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i47r3)-2013 Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities
ANSI/NSF 50(i72)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i81)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i84)-2012 Equipment for swimming pools, spas, hot tubs, and other recreational water facilities
ANSI/NSF 50(i88r1)-2013 Equipment for Swimming Pools, Spas, Hot Tubs and other Recreational Water Facilities
ANSI A108.01-2013 General Requirements: Subsurfaces and Preparations by Other Trades
ANSI/AWS D14.1/D14.1M:2005 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
ANSI/ASA S12.43-1997 Methods for Calculation of Sound Emitted by Machinery and Equipment at Workstations and Other Specified Positions

Japanese Industrial Standards Committee (JISC)

JIS C 60364-5-55:2006 Electrical installations of buildings -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
JIS C 60364-5-55:2011 Electrical installations of buildings -- Part 5-55: Selection and erection of electrical equipment -- Other equipment
JIS C 8147-2-11:2005 Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
JIS B 9946:2011 Ozone treatment apparatus for waste and water in industry and other oxidation uses.Specifications of apparatus and measurement methods for ozone concentration
JIS C 0364-5-551:1999 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter 55: Other equipment Section 551: Low-voltage generating sets

PT-IPQ

NP 2615-1984 Agricultural machinery. Tractors and other agricultural equipment, hydraulic lifting equipment. Related properties
NP 2630-1986 Electronic lighting equipment. Discharge tube accessories, tubular fluorescent capacitor lighting equipment and other discharge tubes
NP 2610-1984 Agricultural machinery. Test codes for tractors and other agricultural equipment and engines. braking effect

International Electrotechnical Commission (IEC)

IEC 60364-5-55/AMD2:2008 Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
IEC 60364-5-551:1994 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 551: Low-voltage generating sets
IEC 60364-5-559:1999 Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 55: Other equipment - Section 559: Luminaires and lighting installations

Acoustical Society of America (ASA)

ASA S12.43-1997 Methods for Measurement of Sound Emitted by Machinery and Equipment at Workstations and other Specified Positions

American Society for Testing and Materials (ASTM)

ASTM A757/A757M-10 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
ASTM A757/A757M-00(2004) Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
ASTM F710-98 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
ASTM F710-21 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
ASTM D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM E1008-97 Standard Practice for Installation, Inspection, and Maintenance of Valve Body Pressure Relief Methods for Geothermal and Other High-Temperature Liquid Applications
ASTM D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM E2119-00 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
ASTM D2321-00 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

European Committee for Standardization (CEN)

EN 1865:1999 Specifications for Stretchers and Other Patient Handling Equipment Used in Road Ambulances
HD 397 S1-1979 Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in service
HD 450.11 S1-1985 Hearing aids; part 11: symbols and other markings on hearing aids and related equipment

RO-ASRO

STAS 10717-1984 CONICAL FITTING 6% FOR SYRINGES, NEEDLES AND OTHER MEDICAL EQUIPMENT Forms and dimensions

American Welding Society (AWS)

AWS D14.1/D14.1M-2005 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment
AWS D14.1/D14.1M-2005 amd-2017 Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1205-2014 Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities

Standard Association of Australia （SAA）

AS 1600.1:2004 Medical equipment - Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - General requirements

European Committee for Electrotechnical Standardization（CENELEC）

HD 450.11-1987 Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids and Related Equipment

Society of Automotive Engineers (SAE)

SAE AS4716B-2011 Gland Design, O-ring and Other Elastomeric Seals

Danish Standards Foundation

DS/ISO 3077:1984 Short link chain for lifting purposes. Grade T (8), calibrated, for chain hoists and other lifting appliances

CZ-CSN

CSN 35 9755-1975 Closures and keys for securing distribution and other electric equipment applied in electric and industrial service rooms

Korean Agency for Technology and Standards (KATS)

KS B 4206-2004(2019) Coding of preparatory functions G and miscellaneousfunctions M for numerical control of machines

SE-SIS

MNC 310 E-1989 Metallic materials — Testing — General physical, chemical, electrical and other properties — Summary
MNC 310-1989 Metallic materials — Testing — Generalphysical, chemical, electrical and other properties — Summary

Others: mass spectrometer,mass spectrometer,Other mass spectrometry techniques,Other Mass Spec Equipment,Mass Spectrometry Other Detection