Sample box fixed

Sample box fixed, Total:253 items.

The international standard classification for "Sample box fixed" includes: Laboratory medicine , Environmental protection , Products of the chemical industry in general , Solid fuels , Chemical analysis .

The Chinese standard classification for "Sample box fixed" includes: Medical laboratory equipment , Analysis and test methods for radioactive substances and radiation intensity , Basic standards and general methods , Basic organic chemicals , Coal analysis methods , Petroleum products in general , Marine installations , Casting .

国家药监局

YY/T 1674-2019 Insulin-like growth gactor Ⅰ testing kit
YY/T 1880-2022 Serum amyloid A testing kit

中华人民共和国环境保护部

GB 11223.1-1989 Analytical determination of uranium in ash of biological samples; Solid fluorimetry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6679-2003 General rules for sampling solid chemical products
GB/T 11223.1-1989 Analytical determination of uranium in ash of biological samples--Solid fluorimetry
GB/T 28730-2012 Method for preparation of solid biofuels sample
GB/T　6679-2003 General Rules for Sampling of Solid Chemical Products
GB/T 6679-2003 General rules for sampling solid chemical products
GB/T 2000-2000 Coking solid products--Sampling

Professional Standard - Petrochemical Industry

SH/T 0229-1992 SH/T 0229-1992

Professional Standard - Medicine

YY/T 1253-2015 Low density lipoprotein(LDL) cholesterol assay kit
YY/T 1206-2013 Total cholesterol kit(COD-PAP method)
YY/T 1254-2015 High density lipoprotein(HDL)cholesterol assay kit

Professional Standard-Ships

CB 3266-1987 Fixed sampling boom
CB* 3266-1987 Fixed Sampling Derrick

Professional Standard - Agriculture

水产品质量安全检验手册 1.3.2.4-2005 Chapter 1 General Introduction Section 3 Sample Treatment 2. New Technology of Sample Pretreatment (4) Solid Phase Extraction
NY/T 1880-2010 Densified biofuel—Methods for sample preparation
GB/T 6679-1986 General rules for sampling of solid chemical products

未注明发布机构

CAN/CSA-ISO 18846:2017 Solid biofuels — Determination of fines content in samples of pellets
DIN 5014 E:2018-04 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN EN ISO 14780 E:2016-01 Biosolid Fuel Sample Preparation (Draft)
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
DIN 19698-2 E:2015-12 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 22022-1 E:2013-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN EN ISO 21646 E:2021-02 Solid recovered fuel sample preparation (draft)
DIN EN ISO 14780:2017 Biogenic solid fuels – sample preparation

Professional Standard - Machinery

JB/T 12339-2015 Fixed grain sampler
JB/T 7699-1995 Technical Specifications for Wooden Model and Core Box for Foundry

工业和信息化部

JB/T 7699-2022 Technical specifications for wooden pattern and core box for foundry
JB/T 14017-2021 Package case(box)digital proofing machine

Group Standards of the People's Republic of China

T/WZJL 012-2023 Food cartons
T/CARD 008-2020 Drug packing box
T/GYSP 5-2018 Samples testing—Jadeite
T/QGCML 3101-2024 Collection box for stool sample collection
T/JZXS 002-2018 Plastic trays and boxes for food

Professional Standard - Geology

DZ/T 0372-2021 Specification for sample preparation of solid mineral dressing and smelting test

Taiwan Provincial Standard of the People's Republic of China

CNS 11210-1993 Retort Pouched Foods

RO-ASRO

STAS 8912-1988 TUBS WITH FIXED BOX BOX Dimensions
STAS 2897-1980 METALIC CASE FOR COAL SPEC IMENS Shape and dimensions
STAS 4030/2-1971 VULCANIZED RUBBER Determination of tear strength of small specimens (Delft specimens)

European Committee for Standardization (CEN)

EN 14780:2011 Solid biofuels - Sample preparation
EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)
EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
prEN ISO 21646:2020 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)

Japanese Industrial Standards Committee (JISC)

JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler

CL-INN

INDITECNOR 32-4ch-1958 Paper and cardboard boxes: sample preparation and extraction
INDITECNOR 20-13ch-1960 Solid Combustibles: Analytical Measurement of Sample Moisture

Military Standards (MIL-STD)

DOD A-A-54804-1993 BOX, INSECT, SPECIMEN
DOD A-A-54836-1993 BOX, PATHOLOGICAL SPECIMEN, SHIPPING
DOD A-A-53324-1988 HOLDER, RADIOGRAPHIC FILM CASSETTE
DOD A-A-54674-1992 BOX, PATHOLOGICAL SPECIMEN SHIPPING, INSULATED
DOD A-A-51018-1985 BOTTLE, URINE SPECIMEN AND CAP, SNAP-ON
DOD MIL-B-36970 A-1991 BOX, BLOOD PRODUCTS SHIPPING

Korean Agency for Technology and Standards (KATS)

KS H ISO 7516-2021 Instant tea in solid form－Sampling
KS M ISO 7742-2007(2012) Solid fertilizers－Reduction of samples
KS M ISO 14780:2021 Solid biofuels — Sample preparation
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS L 5300-2009 Determination of asbestos in bulk material
KS D ISO 3815-1:2006 Zinc and zinc alloys-Part 1:Analysis of solid samples by optical emission spectrometry
KS E ISO 13909-3:2005 Hard coal and coke－Mechanical sampling－Part 3：Coal－Sampling from stationary lots
KS E ISO 687:2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
KS X 5408-1977 Recorded magnetic tape cassette for information interchange

German Institute for Standardization

DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN 51701-1:2007 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940:1992 Testing of carbon materials; sampling and sample preparation; solid materials, solid binders and impregnants
DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
DIN EN ISO 14780:2020-02 Solid biofuels - Sample preparation (ISO 14780:2017 + Amd 1:2019); German version EN ISO 14780:2017 + A1:2019
DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
DIN EN ISO 21646:2022-09 Solid recovered fuels - Sample preparation (ISO 21646:2022); German version EN ISO 21646:2022
DIN 5014:2019-04 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN 5014:2019 Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 19698-2:2016 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 19698-2:2016-12 Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
DIN 51701-5:2008-03 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN 51701-5:2008 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
DIN EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1: Analysis of solid samples by optical emission spectrometry (ISO 3815-1:2005); German version EN ISO 3815-1:2005

IT-UNI

UNI 2432-1944 Stuffing boxes for ship valve systems. Oval stuffing box with fixing screw box
UNI 2429-1944 Stuffing boxes for ship valve systems. Stuffing box with fixing screws

SCC

MIL MIL-C-43369A-1976 CONTAINER ASSEMBLY, SAMPLE AND SPECIMEN SHIPPING, BOX TYPE, FOR MEAT AND DAIRY PRODUCT SAMPLES (NO S/S DOCUMENT) (SUPERSEDING MIL-C-43369)
AS 2806.2:1985 Aluminium ores - Sampling - Sampling from stationary situations
BS 6379-2:1984 Sampling of coffee and coffee products-Methods of sampling instant coffee in cases with liners
MIL MIL-B-37016A-1978 BOX, PLASTIC, INSULATED, MEAT AND DAIRY PRODUCTS, LABORATORY SAMPLE (NO S/S DOCUMENT)
CAN/CSA-ISO 14780-2021 Solid biofuels – Sample preparation
DANSK DS/ISO 21646:2022 Solid recovered fuels – Sample preparation
NS-EN 14780:2011 Solid biofuels — Sample preparation
DANSK DS/EN 14780:2011 Solid biofuels – Sample preparation
DANSK DS/EN 15413:2011 Solid recovered fuels – Methods for the preparation of the test sample from the laboratory sample
NS-EN 15413:2011 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
DIN CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version CEN/TS 15413:2006
AENOR UNE-EN 14780:2012 Solid biofuels. Preparation of sample.
SN-CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
AS 2884.2:1993 Heavy mineral sand concentrates - Sampling - Sampling from stationary situations
AS 2646.5:1985 Sampling of solid mineral fuels, Part 5: Coke - Sampling from stationary situations
AS 2646.4:1984 Sampling of solid mineral fuels, Part 4: Hard coal - Sampling from stationary situations
AS 2646.6:1984 Sampling of solid mineral fuels, Part 6: Hard coal - Preparation of samples
UNE-CEN/TS 14780:2008 EX Solid biofuels - Methods for sample preparation
DANSK DS/CEN/TS 14780:2005 Solid biofuels - Methods for sample preparation
DIN EN 14780 E:2010 Draft Document - Solid biofuels - Sample preparation; German version FprEN 14780:2010
SN-CEN/TS 14780:2005 Solid biofuels — Methods for sample preparation
DIN CEN/TS 14780:2005 Solid biofuels - Methods for sample preparation; German version CEN/TS 14780:2005
AS 2646.7:1985 Sampling of solid mineral fuels, Part 7: Coke - Preparation of samples
DIN 5014 E:2018 Draft Document - Testing of paper and board - Compressive strength of an in s-shape fixed sample
DIN EN 15413 E:2010 Draft Document - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample; German version prEN 15413:2010
10/30213006 DC BS EN 15413. Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
NS-EN ISO 14780:2017 Solid biofuels - Sample preparation (ISO 14780:2017)
DANSK DS/EN ISO 21646:2022 Solid recovered fuels – Sample preparation (ISO 21646:2022)
10/30212565 DC BS EN 14780. Solid biofuels. Sample preparation
DIN 22022-1 E:2013 Draft Document - Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
NS-EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)
DANSK DS/EN ISO 14780:2017 Solid biofuels – Sample preparation (ISO 14780:2017)
DIN 51940 E:2010 Draft Document - Testing of carbon materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
CAN/CGSB 43.22-2001 Produits en carton dur ondule
BS ISO 687:2004 Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
DANSK DS/ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
AENOR UNE-EN ISO 14780:2018 Solid biofuels. Preparation of sample. (ISO 14780:2017).
BS ISO 13909-3:2001 Hard coal and coke. Mechanical sampling-Coal. Sampling from stationary lots
AS 2611:1983 Lead and lead alloys - Sampling and preparation of solid samples for optical emission spectrometry
AS 2612:1983 Aluminium and aluminium alloys - Sampling and preparation of solid samples for optical emission spectrometry
DIN 19698-2 E:2015 Draft Document - Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation
12/30230597 DC BS ISO 25597. Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
VDI 3866 BLATT 1-2000 Determination of asbestos in technical products — Basics — Taking and preparing samples
SN-CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
DIN CEN/TS 15443:2007 Solid recovered fuels - Methods for laboratory sample preparation; German version CEN/TS 15443:2006
AS 2446:1981 Zinc metal and alloys - Sampling and the preparation of solid samples for optical emission spectrometry
DIN 51701-5 E:2007 Draft Document - Testing of solid fuels - Sampling and sample preparartion - Part 5: Testing of precision

GSO

GSO ISO 7516:2015 Instant tea in solid form -- Sampling
GSO ISO 13690:2007 Cereals, pulses and milled products — Sampling of static batches
BH GSO ISO 7742:2016 Solid fertilizers -- Reduction of samples
OS GSO ISO 7742:2015 Solid fertilizers -- Reduction of samples
GSO ISO 7742:2015 Solid fertilizers -- Reduction of samples
BH GSO ISO 6670:2015 INSTANT COFFEE IN CASES WITH LINERS — SAMPLING
OS GSO ISO 6670:2011 INSTANT COFFEE IN CASES WITH LINERS — SAMPLING
OS GSO ISO 687:2013 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
BH GSO ISO 687:2016 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
GSO ISO 687:2013 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample

AT-ON

ONORM E 6508 Teil.4-1990 Mounting boxes; mounting boxes for switches and socket outlets with clawfixation
ONORM E 6508 Teil.1-1990 Mounting boxes; mounting boxes for switches and socket outlets with screw-fixation and installation-boxes
ONORM E 6508 Teil.3-1990 Mounting boxes; mounting boxes for multiple-pole socket outlets with screw-fixation
ONORM S 2116-1-1998 Examination of solidified wastes - Preparation of samples
ONORM E 6508 Teil.2-1990 Mounting boxes; hollow wall boxes for switches and socket outlets with screw-fixation and installation-boxes
ONORM E 6508 Teil.5-1987 Mounting boxes for use in concrete installations for switches and socket outlets with screw- and claw-fixing and installation-boxes
OENORM EN ISO 21646:2021 Solid recovered fuels - Sample preparation (ISO/DIS 21646:2020)

Society of Automotive Engineers (SAE)

SAE AS2251-3-1942 AS2251 Spring Retaining Plate, Signal Cartridge Stowage
SAE AS1887-3-1942 AS1887 Spring Retaining Plate - Signal Cartridge Stowage

Lithuanian Standards Office

LST ISO 7742:2002 Solid fertilizers. Reduction of samples
LST EN 14780-2011 Solid biofuels - Sample preparation
LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

AENOR

UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
UNE-EN 14780:2012 Solid biofuels - Sample preparation
UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

PL-PKN

PN C87072-1993 Solid fertilizers. Reduction of samples
PN G01400-1987 Solid raw materials Geological samples Archivization
PN BN 7321-05-1966 Paper products. ticket box
PN H54117-1988 Moulding boxes of profiled steel elements Reinforcements Re?uirements
PN BN 7161-37-1967 Transport Packaging. Wooden boxes and cartons for meat and meat products
PN BN 7161-13-1964 Cartons and boxes for domestically processed textiles

Association Francaise de Normalisation

NF X34-122:2011 Solid biofuels - Sample preparation.
NF EN ISO 14780:2017 Biocombustibles solides - Préparation des échantillons
NF X34-122*NF EN ISO 14780:2017 Solid biofuels - Sample preparation
NF EN ISO 21646:2022 Solid recovered fuels - Sample preparation
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
NF M01-004:1973 Solid mineral fuels. Method of sampling of hard coal and lignite. Treatment of sample.
NF S86-501:2002 Time instruments - Wristwatch boxes - Fixing dimensions of types without bar
NF EN ISO 14780/A1:2019 Biocombustibles solides - Préparation des échantillons - Amendement 1
NF X34-122/A1*NF EN ISO 14780/A1:2019 Solid biofuels - Sample preparation - Amendment 1
NF ISO 25597:2014 Emissions from stationary sources - Test method for the determination of the mass concentration of PM 2.5 and PM 10 in gases emitted at the stack using cyclone samplers and sample dilution
NF A06-840-1*NF EN ISO 3815-1:2005 Zinc and zinc alloys - Part 1 : analysis of solid samples by optical emission spectrometry

NL-NEN

NEN 3010-1991 Solid mineral fuels - Sampling and sample preparation of coal
NVN 5635-1993 Radioactivity measurements. Sample preparation of suspended solids in water

British Standards Institution (BSI)

BS 5309-4:1976 Methods for sampling chemical products - Sampling of solids
BS 5551-2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS EN 14780:2011 Solid biofuels. Sample preparation
BS EN ISO 14780:2017 Solid biofuels. Sample preparation
BS EN ISO 14780:2017+A1:2019 Solid biofuels. Sample preparation
BS EN ISO 21646:2022 Solid recovered fuels. Sample preparation
DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 15413:2006 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS DD CEN/TS 14780:2005 Solid biofuels — Methods for sample preparation
BS DD CEN/TS 14780:2006 Solid biofuels. Methods for sample preparation
BS ISO 13909-3:2002 Hard coal and coke - Mechanical sampling - Coal - Sampling from stationary lots
23/30441387 DC BS ISO 7763. Testing of paper and board. Compressive strength of an in s-shape fixed sample
BS EN ISO 3815-1:2005 Zinc and zinc alloys - Analysis of solid samples by optical emission spectrometry
BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
21/30395970 DC BS EN ISO 21646. Solid recovered fuels. Sample preparation
BS ISO 11338-2:2003 Stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - Sample preparation, clean-up and determination
BS 5551 Sec.2.5:1989 Fertilizers. Sampling. Method for reduction of samples of solid fertilizers
BS DD CEN/TS 15443:2006 Solid recovered fuels — Methods for laboratory sample preparation
BS ISO 13909-3:2016 Hard coal and coke. Mechanical sampling. Coal. Sampling from stationary lots
BS DD CEN/TS 15443:2007 Solid recovered fuels. Methods for laboratory sample preparation
BS EN 60670-23:2008+A11:2023 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Particular requirements for floor boxes and enclosures
BS 5551-2.8:1991 Fertilizers. Sampling. Methods for preparation of samples of solid fertilizer for chemical and physical analysis

KR-KS

KS M ISO 14780-2021 Solid biofuels — Sample preparation
KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS E ISO 687-2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample

International Organization for Standardization (ISO)

ISO 21646:2022 Solid recovered fuels — Sample preparation
ISO/DIS 7763:1964 Testing of paper and board — Compressive strength of an in s-shape fixed sample
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 14780:2017/Amd 1:2019 Solid biofuels — Sample preparation — Amendment 1
ISO/CD 687:2023 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample

Danish Standards Foundation

DS/EN 14780:2011 Solid biofuels - Sample preparation
DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
DS/ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample

ES-UNE

UNE-EN ISO 14780:2018 Solid biofuels - Sample preparation (ISO 14780:2017)
UNE-EN ISO 21646:2023 Solid recovered fuels - Sample preparation (ISO 21646:2022)
UNE-EN ISO 14780:2018/A1:2020 Solid biofuels - Sample preparation - Amendment 1 (ISO 14780:2017/Amd 1:2019)

RU-GOST R

GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample
GOST R 54229-2010 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST 33255-2015 Solid biofuels. Methods for sample preparation
GOST 33510-2015 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
GOST R 54212-2010 Solid biofuels. Methods for sample preparation
GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
GOST 22656-1977 Guides for presses having 600x600 mm heating plates for stationary two-cassete press moulds. Design and dimensions
GOST 12430-1966 Agricultural products. Technique of inspection and sample extractions for examination and expertise
GOST 22657-1977 Pillows for guides and units of stationary two-cassette press moulds. Design and dimensions
GOST 27379-1987 Solid mineral fuel. Methods for determination of sampling and sample preparation errors
GOST R 54228-2010 Solid recovered fuels. Methods for laboratory sample preparation

SE-SIS

SIS SEN 30 06 36-1970 Boxes for electrical wiring. Circular box of thermoplastic material for flush type apparatus (for screw-fixing)
SIS SS 15 51 07-1981 Petroleum products - Sampling of semi-liquid and certain solid products
SIS 02 02 02-1966 Sampling of liquid, semi-liquid and certain solid products

CEN - European Committee for Standardization

PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
PD CEN/TS 14780:2005 Solid biofuels - Methods for sample preparation
PD CEN/TS 15443:2006 Solid recovered fuels - Methods for laboratory sample preparation

CZ-CSN

CSN ON 15 1925-1963 Food boxes*)
CSN ON 15 1916-1963 Three-part food box*)
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing
CSN ISO 8656:1994 Refractory products. Sampling of raw materials and unshaped products. Sampling scheme
CSN 46 5732-1963 Peats and peat moulds. Sampling, testing and acceptance
CSN 66 8102 Cast.12-1978 Smokeless powders. Methods of teating. Determination of diphenylamine and centralite I in a single sample

DIN

DIN EN ISO 21646:2022 Solid recovered fuels - Sample preparation (ISO 21646:2022)

GOSTR

GOST 12430-2019 Plant quarantine. Sampling methods and rates for regulated products during quarantine phytosanitary inspection and laboratory analysis

Defense Logistics Agency

DLA MIL-PRF-23419/2 R-2012 FUSES, CARTRIDGE, INSTRUMENT TYPE, STYLE FM02 (INDICATING)

HU-MSZT

MSZ 12750/2-1971 Water surface measurement sampling and sample storage
MSZ 4656-1957 Soap box. Aluminum products
MSZ 21976/2-1981 Inspection of solid waste in residential areas and processing of samples

Standard Association of Australia （SAA）

ISO 14780:2017/Amd.1:2019 Solid biofuels — Sample preparation AMENDMENT 1
AS 4323.1:1995(R2014) Selection of stationary source emission sampling locations
AS 4323.1:1995/Amdt 1:1995 Selection of stationary source emission sampling locations

IN-BIS

IS 8883 Pt.2/Sec.1-1978 Methods for sampling chemicals and chemical products Part 2 Sampling equipment Section 1: Solids

American National Standards Institute （ANSI)

ANSI/ASTM D5947:2001 Test Methods for Physical Dimensions of Solid Plastics Specimens
ANSI/ASTM D1896:1999 Transfer Molding Specimens of Thermosetting Compounds, Practice for (08.02)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS438-1951 Clip - Boxcover Fastener (Rev 2)

VDI - Verein Deutscher Ingenieure

VDI 3866 Blatt 1-1999 Determination of asbestos in technical products - Principle - Sampling and sample preparation