Test 3 Test 5

Test 3 Test 5, Total:200 items.

The international standard classification for "Test 3 Test 5" includes: Characteristics and design of machines, apparatus, equipment .

The Chinese standard classification for "Test 3 Test 5" includes: Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9414.5-2018 Maintainability—Part 5:Testability and diagnostic testing

European Telecommunications Standards Institute (ETSI)

ETSI ES 201 873-5-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.7.1 (2015-06)-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.4.1 (2012-04)-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.6.1 (2014-06)-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5-2022 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V3.2.1 (2007-02)-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.9.1 (2022-04)-2022 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.3.1 (2011-06)-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.1.1 (2009-06)-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V3.1.1 (2005-06)-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.8.1 (2017-05)-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ES 201 873-5-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.2.1)
ES 201 873-5-2006 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V3.2.1)
ES 201 873-5-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.1.1)
ES 201 873-5-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.5.1)
ES 201 873-5-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V3.2.1)
ES 201 873-5-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V3.3.1)
ES 201 873-5-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.8.1)
ETSI ES 201 873-5 V4.2.1 (2010-07)-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V4.5.1 (2013-04)-2013 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V1.1.1 (2003-02)-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI).
ETSI ES 201 873-5-2017 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ETSI ES 201 873-5 V3.3.1 (2008-04)-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI)
ES 201 873-5-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.7.1)
ES 201 873-5-2002 Methods for Testing and Specification (MTS); The Testing and Test Control Notation Version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V1.1.1)
ES 201 873-5-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.4.0)
ES 201 873-5-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V3.0.0)
ES 201 873-5-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.6.1)
ES 201 873-5-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V1.1.1)
ES 201 873-5-2011 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.3.1)
ETSI ES 201 873-5-2007 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V3.2.1
ETSI ES 201 873-5-2012 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V4.4.1
ETSI ES 201 873-5-2005 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V3.1.1
ETSI ES 201 873-5-2003 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V1.1.1
ETSI ES 201 873-5-2008 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V3.3.1
ETSI ES 201 873-5-2009 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) V4.1.1
ETSI ES 202 782 V1.2.1 (2014-06)-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing
ETSI ES 202 782 V1.1.1 (2010-07)-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing
ETSI ES 202 782 V1.3.1 (2015-06)-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing
ES 202 782-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.3.1)
ETSI ES 201 873-5-2015 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 5: TTCN-3 Runtime Interface (TRI) (V4.7.1)
ETSI TS 102 995 V1.1.1 (2010-11)-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite
ES 202 782-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.1.1)
ETSI ES 202 782-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing
ETSI ES 202 782-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing V1.1.1
ETSI ES 202 782-2022 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Performance and Real Time Testing
ETSI ES 202 782 V1.4.1 (2022-06)-2022 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: Performance and Real Time Testing
ES 202 782-2014 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 Language Extensions: TTCN-3 Performance and Real Time Testing (V1.2.1)
ETSI ES 203 022 V1.2.1 (2018-05)-2018 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; TTCN-3 extension: Advanced Matching

German Institute for Standardization

DIN EN 50289-3-5:2002-05 Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods; Crush resistance of the cable; German version EN 50289-3-5:2001 / Note: Applies in conjunction with DIN EN 50289-3-1 (2002-05).
DIN EN ISO 22476-5:2023 Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
DIN EN ISO 22282-5 E:2008 Draft Document - Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer test (ISO/DIS 22282-5:2007); German version prEN ISO 22282-5:2007
DIN EN ISO 22476-5:2023-10 Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023); German version EN ISO 22476-5:2023
DIN EN 60512-5-1:2003-01 Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests; Test 5a: Temperature rise (IEC 60512-5-1:2002); German version EN 60512-5-1:2002 / Note: DIN IEC 60512-3 (1994-05) remains valid alongside this st...
DIN EN 60512-11-5:2003-01 Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests; Test 11e: Mould growth (IEC 60512-11-5:2002); German version EN 60512-11-5:2002 / Note: DIN IEC 60512-6 (1994-05) remains valid alongside this standard until 2005...
DIN EN IEC 60068-3-5:2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers (IEC 60068-3-5:2018); German version EN IEC 60068-3-5:2018
DIN EN ISO 9455-5:2021-02 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020); German version EN ISO 9455-5:2020
DIN EN ISO 22477-5 E:2016 Draft Document - Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO/DIS 22477-5:2016); German and English version prEN ISO 22477-5:2016
DIN EN ISO 9455-5:2014-10 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
DIN EN 61300-3-5:2001-11 Fiber optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements; Wavelength dependence of attenuation (IEC 61300-3-5:2000); German version EN 61300-3-5:2001
DIN EN ISO 22476-5 E:2008 Draft Document - Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO/DIS 22476-5:2007); German version prEN ISO 22476-5:2007
DIN EN ISO 22476-5:2013-03 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012); German version EN ISO 22476-5:2012 / Note: To be replaced by DIN EN ISO 22476-5 (2022-05).
DIN EN ISO 22477-5:2019 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018)
DIN EN ISO 22477-5:2016 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO/DIS 22477-5:2016); German and English version prEN ISO 22477-5:2016
DIN EN IEC 61223-3-5:2024 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and constancy tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2019 + Cor. 1:2022); German version EN IEC 61223-3-5:2019 + AC:2022
DIN EN 12350-5:2019-09 Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:2019
DIN EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2016); German version EN 60695-11-5:2017
DIN EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements (IEC 62040-5-3:2016); German version EN 62040-5-3:2017
DIN EN IEC 61223-3-5:2024-07 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and constancy tests - Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2019 + Cor. 1:2022); German version EN IEC 61223-3-5:2019 + AC:2022
DIN EN 62040-5-3:2017-09 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements (IEC 62040-5-3:2016); German version EN 62040-5-3:2017
DIN EN ISO 17892-5:2017-08 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017); German version EN ISO 17892-5:2017
DIN EN ISO 22477-5:2019-05 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018); German version EN ISO 22477-5:2018
DIN EN ISO 22476-5 E:2005-09 Draft Document - Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO/DIS 22476-5:2005); German version prEN ISO 22476-5:2005
DIN EN 12350-5:2019 Testing fresh concrete - Part 5: Flow table test
DIN 58220-5:2009 Visual acuity testing - Part 5: Vision screening test for general use
DIN 4107-5 E:2013-12 Geotechnical measurements - Part 5: Measurement of forces in geotechnical members
DIN EN 60068-5-2:2000-08 Environmental testing - Part 5: Guide to drafting of test methods; terms and definitions (IEC 60068-5-2:1990); German version EN 60068-5-2:1999
DIN 58220-3:2020-08 Draft Document - Visual acuity testing - Part 3: Test for use in expertise; Text in German and English
DIN EN ISO 17892-5:2017 Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
DIN EN IEC 60068-2-5:2019 Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (IEC 60068-2-5:2018); German version EN IEC 60068-2-5:2018

Comitato Elettrotecnico Italiano

CEI 56-21:2000 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation
CEI 56-46:2005 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
CEI EN 50289-3-5:2001 Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods - Crush resistance of the cable
CEI EN 61300-3-5:2016 Fiber optic interconnects and passive components - Fundamental test and measurement procedures Part 3-5: Tests and measurements - Wavelength dependence of attenuation

Spanish Association for Standardization (UNE)

AENOR UNE 20608-3-5:2002 Equipment reliability tests. Part 3: Preferred test conditions. Section 5: Test cycle 5: Land mobile equipment - Low degree of simulation.
UNE 20608-3-5:2002 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation.
UNE-EN ISO 22282-5:2014 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
UNE-EN ISO 9455-5:2015 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
UNE-EN ISO 22476-5:2023 Geotechnical investigation and testing - Field testing - Part 5: Prebored pressuremeter test (ISO 22476-5:2023)
UNE-EN 50289-3-5:2002 Communication cables - Specifications for test methods -- Part 3-5: Mechanical test methods - Crush resistance of the cable.
UNE-EN ISO 22476-5:2014 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
UNE-EN ISO 9455-5:2021 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
UNE 200001-3-5:2002 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles.
UNE-EN 12350-5:2006 Testing fresh concrete. Part 5: Flow table test.
UNE 7050-5:1997 TEST SIEVES. PART 5: TECHNICAL REQUIREMENTS AND TESTING OF TEST SIEVES OF ELECTROFORMED SHEETS.
UNE-EN 12350-5:2009 Testing fresh concrete - Part 5: Flow table test
UNE-EN 60512-14-5:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
UNE-EN 12350-5:2020 Testing fresh concrete - Part 5: Flow table test
UNE-EN 60512-12-5:2006 Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006).
UNE-EN ISO 22477-5:2019 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018)

British Standards Institution (BSI)

19/30390725 DC BS EN IEC 63211-3-5. Durability test methods for electronic displays. Part 3-5. Mechanical tests. Surface durability
PD CEN/TR 15642:2008 Unified tests procedures for the tests of EN 3-7
05/30124397 DC IEC 60706-5. Maintainability of equipment. Part 5. Testability and diagnostic testing
22/30377371 DC BS EN ISO 22476-5. Geotechnical investigation and testing. Field testing. Part 5. Prebored pressuremeter test

Korean Agency for Technology and Standards (KATS)

KS A IEC 60605-3-5:2002 Equipment reliability testing － Part 3: Preferred test conditions － Section 5: Test cycle 5: Ground mobile equipment － Low degree of simulation
KS A IEC 60605-3-5-2022 Equipment reliability testing － Part 3: Preferred test conditions － Section 5: Test cycle 5: Ground mobile equipment － Low degree of simulation
KS A IEC 60300-3-5-2003(2018) Reliability Management - Part 3 - Section 5: Application Guidelines - Reliability Test Conditions and Statistical Test Principles
KS B ISO 9455-5:2021 Soft soldering fluxes — Test methods —Part 5: Copper mirror test
KS B ISO 9455-5-2021 Soft soldering fluxes — Test methods —Part 5: Copper mirror test
KS A IEC 60300-3-5:2003 Dependability management － Part 3: Application guide － Section 5: Reliability test conditions and statistical test principles

Czech Standards Institute (UNMZ)

CSN IEC 605-3-5:1997 Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation

American Society of Mechanical Engineers (ASME)

ASME SEC IV PT HLW A-5-2003 Article 5 Tests

Association Francaise de Normalisation

NF EN IEC 60068-3-5:2018 Environmental testing - Part 3-5: Accompanying documentation and guidance - Confirmation of temperature test chamber performance
NF EN ISO 22477-5:2018 Geotechnical reconnaissance and testing - Testing of geotechnical structures - Part 5: testing of anchor rods
NF EN 50289-3-5:2001 Communication cables - Specifications for test methods - Part 3-5: mechanical test methods - Cable crush resistance
NF EN ISO 9455-5:2020 Soft soldering flux - Test methods - Part 5: copper mirror test
NF P18-431-5*NF EN 12350-5:2019 Testing fresh concrete - Part 5 : flow table test
NF EN ISO 22476-5:2013 Geotechnical reconnaissance and testing - In-situ testing - Part 5: Pre-drilling pressuremeter testing
NF EN 12350-3:2019 Tests for fresh concrete - Part 3: Vébé test

Standards Norway

NS-EN ISO 9455-5:2014 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014)
NS-EN ISO 22477-5:2018 Geotechnical investigation and testing — Testing of geotechnical structures — Part 5: Testing of grouted anchors (ISO 22477-5:2018)
NS-EN ISO 22476-5:2012 Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test (ISO 22476-5:2012)
NS-EN ISO 22282-5:2012 Geotechnical investigation and testing — Geohydraulic testing — Part 5: Infiltrometer tests (ISO 22282-5:2012)
NS-EN ISO 9455-5:2020 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
NS-EN ISO 22476-3:2005 Geotechnical investigation and testing — Field testing — Part 3: Standard penetration test (ISO 22476-3:2005)
NS-EN 12350-5:1999 Testing fresh concrete — Part 5: Flow table test
NS-EN 12350-5:2009 Testing fresh concrete — Part 5: Flow table test
NS-EN 12350-5:2019 Testing fresh concrete — Part 5: Flow table test
NS-EN ISO 9117-5:2012 Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012)
SN-CEN/TR 15642:2008 Unified tests procedures for the tests of EN 3-7
NS-EN ISO 17892-5:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
NS-EN 12350-3:2019 Testing fresh concrete — Part 3: Vebe test

Danish Standards Foundation

DANSK DS/EN ISO 22477-5:2018 Geotechnical investigation and testing – Testing of geotechnical structures – Part 5: Testing of grouted anchors (ISO 22477-5:2018)
DANSK DS/IEC 63211-3-5:2020 Durability test methods for electronic displays – Part 3-5: Mechanical tests – Surface durability
DANSK DS/EN ISO 9455-5:2020 Soft soldering fluxes – Test methods – Part 5: Copper mirror test (ISO 9455-5:2020)
DANSK DS/ISO 9455-5:2020 Soft soldering fluxes – Test methods – Part 5: Copper mirror test
DANSK DS/EN 29455-5:1994 Soft soldering fluxes - Test methods - Part 5: Copper mirror test
DS/EN 12350-5:2013 Testing fresh concrete - Part 5: Flow table test
DANSK DS/EN ISO 17892-5:2017 Geotechnical investigation and testing – Laboratory testing of soil – Part 5: Incremental loading oedometer test (ISO 17892-5:2017)
DANSK DS/EN 12350-5:2019 Testing fresh concrete – Part 5: Flow table test
DANSK DS/EN ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests

Austrian Standards

OENORM EN ISO 9455-5:2021 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)

Finnish Standards Institute

SFS-EN 50289-3-5:2001 Communication cables - Specifications for test methods - Part 3-5: Mechanical test methods - Crush resistance of the cable
SFS-EN ISO 9455-5:2020 Soft soldering fluxes. Test methods. Part 5: Copper mirror test (ISO 9455-5:2020)
SFS-EN ISO 22477-5:2018 Geotechnical investigation and testing. Testing of geotechnical structures. Part 5: Testing of grouted anchors (ISO 22477-5:2018)

Lithuanian Standards Office

LST EN 29455-5-2000 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:1992)
LST EN ISO 22282-5:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 5: Infiltrometer tests (ISO 22282-5:2012)
LST EN ISO 9455-5:2020 Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
LST EN ISO 22476-5:2013 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
LST EN 60512-11-5-2003 Connectors for electronic equipment. Tests and measurements. Part 11-5: Climatic tests. Test 11e: Mould growth (IEC 60512-11-5:2002)
LST EN 60512-5-1-2003 Connectors for electronic equipment. Tests and measurements. Part 5-1: Current-carrying capacity tests. Test 5a: Temperature rise (IEC 60512-5-1:2002)
LST EN 60068-3-5-2003 Environmental testing. Part 3-5: Supporting documentation and guidance. Confirmation of the performance of temperature chambers (IEC 60068-3-5:2001)
LST EN 60512-14-5-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006)
LST EN 12350-5-2009 Testing fresh concrete - Part 5: Flow table test
LST EN 60695-11-5-2005 Fire hazard testing. Part 11-5: Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2004)
LST EN 60512-12-5-2006/AC-2007 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method (IEC 60512-12-5:2006)
LST EN 60512-9-5-2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (IEC 60512-9-5:2010)

Polski Komitet Normalizacyjny (PKN)

PN-EN ISO 22477-5-2018-10 P Geotechnical investigation and testing -- Testing of geotechnical structures -- Part 5: Testing of grouted anchors (ISO 22477-5:2018)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60300-3-5:2016 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
BH GSO ISO 9455-5:2017 Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test
BH GSO ISO 22476-5:2017 Geotechnical investigation and testing -- Field testing -- Part 5: Flexible dilatometer test

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60300-3-5:2015 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
OS GSO ISO 9455-5:2016 Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0468-3-5-2018 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers (IEC 60068-3-5:2018); German version EN IEC 60068-3-5:2018
VDE 0468-2-5-2011 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing (IEC 60068-2-5:2010 + corrigendum Dec. 2010); German version EN 60068-2-5:2011
VDE 0558-550-3-2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements (IEC 62040-5-3:2016); German version EN 62040-5-3:2017

GCC Standardization Organization

GSO ISO 9455-5:2016 Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test
GSO IEC 60300-3-5:2015 Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles
GSO IEC 60068-2-5:2015 Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing
GSO ISO 22476-5:2015 Geotechnical investigation and testing -- Field testing -- Part 5: Flexible dilatometer test
GSO ISO 22282-5:2017 Geotechnical investigation and testing -- Geohydraulic testing -- Part 5: Infiltrometer tests

International Organization for Standardization (ISO)

ISO 9455-5:2020 Soft soldering fluxes — Test methods — Part 5: Copper mirror test

Bureau of Indian Standards

IS/IEC 60068-2-38-2021 Environmental Testing - Part 2 Tests - Section 5 Test Z/AD: Composite TemperatureHumidity Cyclic test
IS 101 Pt.5/Sec.3-1988 Methods for sampling and testing of paints, varnishes and related products Part 5 Mechanical tests Section 3: Impact resistance (falling ball test)
IS 15474-3-5-2018 Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles
IS 13826 Pt.5-1994 Bitumen-Based Felts—Test Methods Part 5 Heat Resistance Test

International Telecommunication Union (ITU)

ITU-T Z.161-2019 Testing and Test Control Notation version 3: TTCN-3 core language
ITU-T Z.171-2023 Testing and Test Control Notation version 3: Using JSON with TTCN-3
ITU-T Z.161-2020 Testing and Test Control Notation version 3: TTCN-3 core language
ITU-T Z.161.5-2022 Testing and Test Control Notation version 3: TTCN-3 language extensions: Performance and real time testing
ITU-T Z.166-2019 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI)
ITU-T Z.167-2020 Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3
ITU-T Z.161.5-2014 Testing and Test Control Notation version 3: TTCN-3 Language extensions: Performance and real time testing
ITU-T Z.166-2022 Testing and Test Control Notation version 3: TTCN-3 control interface (TCI)
ITU-T Z.145 SPANISH-2006 Notación de pruebas y de control de pruebas versión 3: Interfaz de control
ITU-T Z.144 FRENCH-2006 Testing and Test Control Notation version 3 (TTCN-3): Runtime interface (TRI)
ITU-T Z.168-2021 Testing and Test Control Notation version 3: The IDL to TTCN-3 mapping
ITU-T Z.167-2021 Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3
ITU-T Z.167-2022 Testing and Test Control Notation version 3: Using ASN.1 with TTCN-3
ITU-T Z.171-2021 Testing and Test Control Notation version 3: Using JSON with TTCN-3

Asociación Española de Normalización (AENOR)

AENOR UNE-EN 29455-5:1995 SOFT SOLDERING FLUXES. TEST METHODS. PART 5: COPPER MIRROR TEST. (ISO 9455-5:1992).

European Committee for Standardization (CEN)

PREN 12350-5-2017 Testing fresh concrete - Part 5: Flow table test

Ente Nazionale Italiano di Unificazione

UNI EN 12350-5:2019 Testing fresh concrete - Part 5: Flow table test
UNI EN 13480-5:2011 Metallic industrial piping - Part 5: Inspection and testing
UNI EN 12350-3:2019 Testing fresh concrete - Part 3: Vebe test

Defense Logistics Agency

DLA MIL-STD-883-5 CHANGE 1-2021 Test Methods for Microcircuits - Part 5: Test Methods 5000-5999