thermocycling pcr

thermocycling pcr, Total:464 items.

The international standard classification for "thermocycling pcr" includes: Power transmission and distribution lines , Installations and equipment for waste disposal and treatment , Metallic coatings , Walls. Partitions. Facades , Refrigerating technology , Thermal and sound insulating materials , Gas and steam turbines, Steam engines , Boilers and heat exchangers , Environmental testing , Buildings in general , Company organization and management in general .

The Chinese standard classification for "thermocycling pcr" includes: Raw pharmaceutical material processing machinery and equipment , General and microsurgical devices , Pharmaceutical processing machinery and equipment , Medicinal materials pickoff and Chinese medicine processing machinery , Gas turbine and its auxiliary equipment , Power station equipment automation devices , Environmental protection equipment , Material Protection , Building construction and decoration engineering , Refrigeration equipment , Heat insulation, sound absorption, light fireproof material , Boiler and its auxiliary equipment , Basic laboratory equipment , Basic standards and general methods , Commerce, Trade and Contract .

Professional Standard - Medicine

YY 0026-1990 Hot air circulating oven
YY 0067-1992 Micro-circulation microscopes

Professional Standard - Machinery

JB/T 5848-1991 Guideline for Thermal Cycling Loading Test Method
JB/T 20119-2009 ot-air circulation sterilzing cabinet
JB/T 8953.3-1999 Procurement for combined-cycle plants HRSG
JB/T 12323-2015 Evaporatively-cooled water chilling(heat pump) packages using the vapor compression cycle
JB/T 13705-2019 Intelligent hot water circulation canned motor pumps
JB/T 12323-2022 Evaporatively-cooled water chilling (heat pump) packages using the vapor compression cycle
JB/T 20033-2011 Hot air circulating oven
JB 20033-2004 Hot air circle oven

Hebei Provincial Standard of the People's Republic of China

DB13/T 1287-2010 Technical specification for steam turbine circulating water waste heat heating
DB13/T 1179-2010 liquid circulation exhaust heater
DB1310/T 355-2024 Technical specification for geothermal single-hole circulation heat extraction system

Group Standards of the People's Republic of China

T/ZZB 2826-2022 Commercial hot air circulation disinfection tableware cabinet
T/CECS 489-2017 Technical specification for non-powered solar water heating system
T/ZZB 018-2015 Intelligent hot water circulating canned pump
T/NJ 1111-2019 Heat pump type batch recirculating grain dryer
T/FSS 20-2021 Foshan Standard Domestic gas instantaneous water heater with circulating preheating function
T/FSS 41-2022 Foshan standard Water chilling package using the vapor compression cycle
T/CAB 0199-2022 Air fryer using three-dimensional hot air circulation space technology
T/ZZB 0188-2017 Heat pump-batch type recirculating grain dryer
T/FSS 41-2024 Water chilling package using the vapor compression cycle
T/CEEIA 252-2016 Thermal cycle testing method of stator bars for large rotating machines
T/FSS 20-2024 Domestic gas instantaneous water heater with circulating preheating function
T/QGCML 1412-2023 Technical conditions of automobile heat exchange circulation piping system
T/QGCML 665-2023 Automatic circulation hot air dryer
T/HEBQIA 157-2023 SRY series high temperature heat medium circulation pump

Military Standard of the People's Republic of China-General Armament Department

GJB 9876-2020 Thermal cycle life test method of thermal barrier coating
GJB 2502.8-2015 Test method for thermal control coatings of spacecraft. Part 8：Thermal cycle test

未注明发布机构

AGFW FW 523-2 M E:2010-12 Hot water production systems - circulation systems -
AGFW FW 513 M:2013-06 Instructions for the installation and operation of circulation pumps in district heating substations
DVGW W 554:2011-03 Controlled circulation valve
AGFW FW 523-2 M:2011-06 Technical specification for integrated circulation system of drinking water heating system
DVGW W 553:1998-12 Dimensioning of circulation-systems in central drinking water heating systems
DVGW VP 554:2003-04 Thermostatic circulation control valves for hydraulic balance in hot water drinking water systems
JEDEC JESD22-A104F.01-2023 Temperature Cycling
AGFW FW 510 A E:2010-12 Requirements for circulation water in industrial and district heating systems and recommendations for their operation
JIS A 1432:1988 Method of Testing to Determine the Thermal Properties of Insulated Heating Tubes (Hot Water Circulation Procedure)
AGFW FW 513 H:2002-04 Installation and Operating Instructions for Circulation Pumps in District Heating House Stations
JIS R 2616:1979(1995) Testing Method for Thermal Conductivity of Insulating Fire Bricks by Water Circulation
AGFW FW 308:2011-07 Certification of CHP plants - Determining the CHP electricity
FORD FLTM BQ 104-06-2000 THERMAL CYCLE TESTING OF ELECTROPLATED PLASTICS

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 38165-2019 Detection of circulating cell-free DNA concentration in human peripheral blood—Real-time PCR method based on Alu sequence
GB/T 43496-2023 Test method of thermal cycling and condensation resistance of curtain walls
GB/T 12610-1990 Electroplated coatings on plastics materials--Thermal cycling test
GB 25131-2010 Safety requirements for water chillers(heat pump)using the vapor compression cycle
GB/T 30577-2014 Specification of Heat Recovery Steam Generator for Combined-cycle for Gas-steam
GB/T 28853-2012 Thermostatic baths and circulators - Heated circulators
GB/T 25861-2023 Water-source high temperature heat pumps using the vapor compression cycle
GB/T 2317.3-2008 Test method for electric power fittings - Part 3: Heat cycle tests for electric power fittings
GB/T 43318-2023 Gas turbine combined cycle power plants—Thermal performance tests
GB/T 25861-2010 Water-source high temperature heat pumps using the vapor compression cycle
GB/T 2317.3-2000 Heat cycle tests for electric power fittings
GB/T 26809-2011 Thermostatic baths and circulators - Refrigerated circulators
GB/T 33158-2016 Thermal insulating products for building applications一Determination of behaviour under cyclic loading
GB/T 37819-2019 Bi-circulation power generation unit for low-temperature waste heat recovery

Shanxi Provincial Standard of the People's Republic of China

DB14/T 845-2014 Low temperature heat source double cycle generator set

Professional Standard - Electron

SJ/Z 9001.6-1987 Basic environmental testing procedures--Part 2: Tests--Test Db: Damp heat cyclic(12+12-hour cycle)

Professional Standard - Construction Industry

JG/T 397-2012 Test method for thermal cycling of curtain walls

Professional Standard - Energy and Power Planning

DL/T 1751-2017 Operating regulations for waste heat boiler of gas-steam combined cycle unit
DL/T 1427-2015 Waste Heat Boiler in Combined Cycles Performance Test Codes
DL/T 1750-2017 Overhaul and maintenance regulations for horizontal natural circulation waste heat boiler of gas-steam combined cycle unit

Guangdong Provincial Standard of the People's Republic of China

DB44/T 997-2012 Ceramic Waste Recycling Heat Insulation Lightweight Environmentally Friendly Ceramic Bricks
DB44/T 115-2000 Central air-conditioning circulating water and circulating cooling water quality standards

Professional Standard - Business

SB/T 11040-2013 Technical requirement of heat circulating multifunctional drying equipment

Professional Standard - Light Industry

QB/T 8097-2024 Air circulation fan

Taiwan Provincial Standard of the People's Republic of China

CNS 12558-1989 Method of Test for Solar Water Heater System (Automatic Cycle)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 2502.8-2006 Test method for thermal control coatings of spacecraft Part 8: Thermal cycle test

Beijing Provincial Standard of the People's Republic of China

DB11/T 935-2012 Engineering technical specification for single well circulation heat exchange ground energy collection well

Professional Standard - Commodity Inspection

SN/T 3557-2013 RT-PCR and real time RT-PCR detection methods of yellow fever virus
SN/T 3559-2013 RT-PCR and real time RT-PCR detection methods of Rift Valley fever virus

International Organization for Standardization (ISO)

ISO 20836:2021 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of microorganisms — Thermal performance testing of thermal cyclers
ISO/DIS 59040:2023 Circular economy — Product circularity data sheet
ISO/CD 59040 Circular Economy — Product Circularity Data Sheet
ISO/DIS 59020 Circular economy — Measuring and assessing circularity
ISO 59040:2025 Circular economy — Product circularity data sheet
ISO 21465:2025 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
ISO 59020:2024 Circular economy — Measuring and assessing circularity performance
ISO/FDIS 59020:2023 Circular economy — Measuring and assessing circularity performance
ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers.
ISO/TR 59032:2024 Circular economy
ISO 18888:2017 Gas turbine combined cycle power plants — Thermal performance tests
ISO 17493:2000 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven

European Committee for Standardization (CEN)

EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
FprEN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO/FDIS 20836:2021)
EN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers
prEN 16306-2021 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers ISO/TS 20836:2005
CEN/TR 16911:2015 Heat meters - Recommendations for circulation water in industrial and district heating systems and their operation

CZ-CSN

CSN 03 8823-1971 Damp heat test - cyclic
CSN 34 7010 Cast.45-1972 Heating cycle test of power cable
CSN ONA 30 9841-1964 Cycle pujnps.
CSN 11 0915-1957 loop expansion
CSN 34 5791 Cast.2-30-1989 Ekkctrotechnical and electronic products.Basic environmental Jesting procedures.Part 2-30 Test Db and guidance:Damp heat, cyclic (12 + 12-hour eyele)
CSN 07 0416-1983 Steam and hot-water boilers. Strength calculation by cyclic loading
CSN 27 8511-1984 Cyclic mixers

Ente Nazionale Italiano di Unificazione

UNI EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers
UNI EN 1239:2000 Adhesives - Freeze-thaw stability
UNI CEN ISO/TS 20836:2006 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers
UNI EN 16306:2013 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
UNI 8063:1980 Forced air heat exchangers for heating plants. Test methods.
UNI 10789:1999 Power plants - Combined-cycle systems - Procurement specifications
UNI 9318:1989 Circulation pumps for thermal electric power plants. Requirements and rules for ordering and testing.

Association Francaise de Normalisation

NF V03-027*NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers
NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermocyclers
NF C20-730*NF EN 60068-2-30:2006 Environmental testing - Part 2-30 : tests - Test Db : damp heat, cyclic (12 h + 12 h cycle)
NF EN 60068-2-30:2006 Environmental tests - Part 2-30: tests - Db test: cyclic damp heat test (12 h + 12 h cycle)
NF P50-501:1980 Liquid circulation solar detecting elements. Measurement ofthermal performances.
NF C20-730:1999 Environmental testing. Part 2 : tests. Test Db and guidance : damp heat, cyclic (12 plus 12 hour cycle).
NF X30-904*NF ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
NF ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
NF EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
NF D35-343:1984 GAS HOT WATER CENTRAL HEATING BOILERS WITH ATMOSPHERIC BURNERS AND A SEALED COMBUSTION CIRCUIT COMPRISING A FAN IN THE "COMBUSTION AIR" OR "COMBUSTION PRODUCTS CIRCUIT".
NF EN 15532:2009 Cycles - Terminologie
NF EN 1704:1997 Plastic piping systems - Thermoplastic valves - Test method for verifying a valve after thermal cycles under bending
NF ISO 17493:2017 Heat protective clothing and equipment - Method of testing resistance to convective heat using a hot air circulating oven
NF S74-603*NF ISO 17493:2017 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven

German Institute for Standardization

DIN EN ISO 20836:2022-05 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021); German version EN ISO 20836:2021
DIN EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
DIN EN IEC 62892:2019-12*VDE 0126-892:2019-12 Extended thermal cycling of PV modules
DIN EN 60068-2-30:2006-06 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005 / Note: DIN EN 60068-2-30 (2000-02) remains valid alongside this standard until 2008-11-01.
DIN EN 16306:2022-11 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles; German version EN 16306:2022
DIN 94679-1 E:2022-10 Hydronic systems in heating, cooling and ventilation installations - Part 1: Basics of hydronic balancing
DIN EN ISO 20836:2020-02 Draft Document - Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Thermal performance testing for thermal cyclers (ISO/DIS 20836:2020); German and English version prEN ISO 20836:2020
DIN 94679-1:2022-10 Hydronic systems in heating, cooling and ventilation installations - Part 1: Basics of hydronic balancing / Note: Date of issue 2022-09-02
DIN EN 16306:2022 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
DIN 6406:1966-02 Loops
DIN 3368-2:1989 Gas appliances, central heating boilers, combi-waterheaters; requirements, testing
DIN EN IEC 60068-2-30 E:2024-10 Draft Document - Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 104/1048/CDV:2024); German and English version prEN IEC 60068-2-30:2024
DIN 4752:1967 Water heating equipment - Safety requirements and installation of high temperature circulating hot water boilers
DIN 53496:1973 Electroplated coatings; testing of electroplated plastic articles; thermal cycling test
DIN 53496:1984 Electroplated coatings; testing of electroplated plastic articles; thermal cycling test
DIN 12876-2:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN 3368-2 A3 E:1992-04 Gas appliances; Central heating boilers and combi-water heaters - Amendment 3 Part 2 A3
DIN 12876-2:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN 12876-2 Electrical laboratory devices - Laboratory circulators and baths - Part 2: Determination of ratings of heating and refrigerated circulators
DIN ISO 8562:2016-07 Cycles - Stem wedge angle (ISO 8562:1990) / Note: To be replaced by DIN ISO 8562 (2021-09).
DIN EN 13793:2003-12 Thermal insulating products for building applications - Determination of behaviour under cyclic loading; German version EN 13793:2003

British Standards Institution (BSI)

BS 2011-2.1DB:1977 Basic enviromental testing proceedures. Damp heat, cyclic (12+12 hour cycle
BS EN ISO 20836:2021 Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of microorganisms. Thermal performance testing of thermal cyclers
BS 2011-2.1DB:1981 Environmental testing. Tests-Test Db and guidance : Damp heat, cyclic (12 + 12 hour cycle)
BS EN 60068-2-30:1999 Environmental testing. Test methods-Test Db and guidance: damp heat, cyclic (12 + 12 hour cycle)
BS 2011-2DB:1973 The enviromental testing of electronic components and electronic equipment. Damp heat, cyclic (12+12 hour cycle)
BS EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
20/30383484 DC BS EN ISO 20836. Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Thermal performance testing of thermal cyclers
BS 1394:1947 Power driven circulators for heating plants
BS 6332-6:1990 Thermal performance of domestic gas appliances - Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
BS DD CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Performance testing of thermal cyclers
BS EN 15194:2017+A1:2023 Cycles. Electrically power assisted cycles. EPAC Bicycles
BS EN IEC 62892:2019 Extended thermal cycling of PV modules. Test procedure
23/30469457 DC BS EN IEC 60068-2-30. Environmental testing - Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)
BS ISO 21465:2025 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
BS ISO 59040:2025 Circular economy. Product circularity data sheet
BS 6332-6:1990(1999) Thermal performance of domestic gas appliances — Part 6 : Specification for thermal performance of combined appliances : fanned - circulation ducted - air heater / circulator
BS ISO 59020:2024 Circular economy. Measuring and assessing circularity performance
23/30439281 DC ISO 59040 Circular economy. Product circularity data sheet
PD CEN/TS 17831:2023 Cycles. Electrically power assisted cycles. Anti-tampering measures
24/30478483 DC BS ISO 21465 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
BS DD CEN ISO/TS 20836:2006 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing of thermal cyclers
BS EN 17404:2022 Cycles. Electrically power assisted cycles. EPAC Mountain bikes
BS EN 442-2:2014 Radiators and convectors. Test methods and rating
21/30442426 DC BS EN 15194 AMD1. Cycles. Electrically power assisted cycles. EPAC Bicycles
BS ISO 18888:2017 Gas turbine combined cycle power plants. Thermal performance tests
BS EN 2591-321:1998 Elements of electrical and optical connection - Test methods - Damp heat, cyclic test
BS 5258-9:1989 Safety of domestic gas appliances - Specification for combined appliances: fanned-circulation ducted-air heaters/circulators
BS EN 442-2:1997 Specification for radiators and convectors - Test methods and rating
22/30453277 DC BS EN 15496. Cycles. Requirements and test methods for cycle locks
BS 5449:1990(2002) Specification for Forced circulation hot water central heating systems for domestic premises
BS EN 17860-2:2024 Carrier Cycles - Lightweight single track carrier cycles. Mechanical aspects
BS PD CEN/TR 16911:2015 Heat meters. Recommendations for circulation water in industrial and district heating systems and their operation
22/30445957 DC BS EN 15194:2017 AMD2. Cycles. Electrically power assisted cycles. EPAC Bicycles
19/30375863 DC BS EN 17404. Cycles. Electrically power assisted cycles. EPAC Mountain bikes
BS 6332-1:1983 Thermal performance of domestic gas appliances.-Specification for thermal performance of central heating boilers and circulators
BS 6332-5:1986 Thermal performance of domestic gas appliances-Specification for thermal performance of fanned-circulation ducted-air heaters
BS ISO 17493:2001 Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS 5258-9:1989(1999) Safety of domestic gas appliances — Part 9 : Specification for combined appliances : fanned - circulation ducted - air heaters / circulators
BS ISO 17493:2000 Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS ISO 17493:2016 Clothing and equipment for protection against heat. Test method for convective heat resistance using a hot air circulating oven
BS 811:1950(1999) Specification Cycle threads

Military Standards (MIL-STD)

DOD A-A-51620-1986 PAD, HOT-COLD TREATMENT, CIRCULATING
MIL MIL-PRF-32001-1997 FAN, CIRCULATING-HEAT DISTRIBUTION, SELF-POWERED
MIL MIL-U-17691D-1988 UNIT HEATER, AIR CIRCULATING, STEAM - HOT WATER (S/S BY S-U-2833)
DOD A-A-54879-1993 BREATHING CIRCUIT, ANESTHESIA
DOD A-A-54335-1991 PUMP, CIRCULATING

Korean Agency for Technology and Standards (KATS)

KS B 8206-2024 Hot-water circulating pumps for boiler
KS B 8206-2019 Hot-water circulating pumps for boiler
KS B 8206-2014(2024) Hot-water circulating pumps for boiler
KS B 8206-1998 Hot-water circulating pumps for boiler
KS B 8206-2014 Hot-water circulating pumps for boiler
KS C 3119-2020 heatcycle test for aluminium fittings
KS C 3119-1974(2020) heateycle test for aluminium fittings
KS C IEC 60068-2-30-2020 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h + 12 h cycle)
KS B 8296-2015 Solar water heaters(Thermosiphon, Forced circulation, Evacuated-tube integrated type)
KS C IEC 60068-2-30:2020 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h + 12 h cycle)
KS C IEC 60068-2-30:2014 Environmental testing — Part 2-30: Tests — Test Db: Damp heat, cyclic(12 h+12 h cycle)
KS C 3119-1974 heateycle test for aluminium fittings
KS F 2823-2006 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
KS C 0227-2016 Basic environmental testing procedures-Part 2 : Tests-Test Db and guidance : Damp heat, cyclic(12+12-hour cycle)
KS F 2823-2016 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
KS F 2823-2016(2021) Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
KS B 8296-2015(2021) Solar water heaters(Thermosiphon, Forced circulation, Evacuated-tube integrated type)
KS K ISO 17493-2008(2017) Clothing and equipment for protection against heat－Test method for convective heat resistance using a hot air circulating oven
KS C IEC PAS 62178-2013 Temperature cycling
KS C IEC PAS 62178-2003(2008) Temperature cycling
KS B 8296-2023 Solar water heaters(Thermosiphon, Forced circulation, Evacuated tube integrated type)
KS B 5345-1998(2018) Forced air circulation oven type thermal accerelated aging testers
KS B 5345-2023 Forced air circulation oven type thermal accerelated aging testers
KS B 5345-1998(2023) Forced air circulation oven type thermal accerelated aging testers
KS B 8205-1998 Test methods of long-term performance for solar domestic water heating system
KS M 5999-2017 Paints and varnishes－Testing thermal resistance of coatings using thermal cycling－Seawater Immersion
KS K ISO 17493:2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven
KS M 5999-2022 Paints and varnishes — Testing thermal resistance of coatings using thermal cycling — Seawater immersion
KS K ISO 17493-2021 Clothing and equipment for protection against heat — Test method for convective heat resistance using a hot air circulating oven

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 13-2012 HYDRONIC HEATING AND COOLING
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 13-2012 HYDRONIC HEATING AND COOLING
ASHRAE FUN SI CH 1-2005 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS IP CH 2-2009 THERMODYNAMICS AND REFRIGERATION CYCLES
ASHRAE FUNDAMENTALS IP CH 1-1997 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 1-1993 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 1-2001 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS IP CH 2-2013 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS IP CH 1-2005 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS IP CH 2-2017 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 2-2017 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 2-2013 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 1-2005 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS IP CH 1-1993 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 1-1997 Thermodynamics and Refrigeration Cycles
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 32-2004 Hydronic Heat-Distributing Units and Radiators
ASHRAE FUNDAMENTALS IP CH 1-2001 Thermodynamics and Refrigeration Cycles
ASHRAE FUNDAMENTALS SI CH 2-2009 THERMODYNAMICS AND REFRIGERATION CYCLES
ASHRAE 4169-1998 Thermoelectric Self-Powered Hydronic Heating Demonstration
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 32-2004 Hydronic Heat-Distributing Units and Radiators
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 32-2000 Hydronic Heat-Distributing Units and Radiators
ASHRAE EQUIP SI CH 35-2008 HYDRONIC HEAT-DISTRIBUTING UNITS AND RADIATORS
ASHRAE EQUIP IP CH 35-2008 HYDRONIC HEAT-DISTRIBUTING UNITS AND RADIATORS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 12-2008 Hydronic Heating and Cooling System Design
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 12-2004 Hydronic Heating and Cooling System Design
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 12-2008 HYDRONIC HEATING AND COOLING SYSTEM DESIGN
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 12-2004 Hydronic Heating and Cooling System Design
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 12-2000 Hydronic Heating and Cooling System Design
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 12-1996 Hydronic Heating and Cooling System Design
ASHRAE AN-04-7-3-2004 Heat-Activated Dual-Function Absorption Cycle
ASHRAE 4828-2006 Condensing Boilers and Baseboard Hydronic Heating Systems
ASHRAE EQUIP IP CH 12-2008 HYDRONIC HEATING AND COOLING SYSTEM DESIGN
ASHRAE EQUIP SI CH 12-2008 Hydronic Heating and Cooling System Design
ASHRAE CH-99-16-4-1999 Control Strategies for Domestic Hot Water Recirculation Systems
ASHRAE AT-01-7-4-2001 Integration of Hydronic Thermal Transport Systems with Fire Suppression Systems
ASHRAE FUN IP CH 1-2001 Thermodynamics and Refrigeration Cycles(ASHRAE Handbook: Fundamentals, IP Edition)
ASHRAE FUN SI CH 1-2001 Thermodynamics and Refrigeration Cycles(ASHRAE Handbook: Fundamentals, SI Edition)
ASHRAE SE-99-21-02-1999 Non-Dimensional Pumping Power Curves for Water Loop Heat Pump Systems
ASHRAE CH 32 SI-2000 Hydronic Heat-Distributing Units and Radiators(ASHRAE Handbook: HVAC Systems and Equipment, SI Edition)

ISUZU - Isuzu Motors Ltd.

ISC-F20-001-2001 Thermal Cycling Test Procedure

GM North America

GM 9985708-1989 Adhesive - Thermal Cycling Resistant
GM GM9645P-1992 Ultrasonic and Thermal Cycle Test
GM GM9505P-1999 Automotive Environmental Cycles

RO-ASRO

STAS 8393/5-1981 Environmental testing procedures DAMP HEAT CYCLIC, 12 + 12 HOUR CYCLE Test Db
STAS 3361/1-1987 Natural luel g'ases DETERMINATION OF IIEATING POWER IN A WATER CIRCULATION CALORIMETER

Spanish Association for Standardization (UNE)

UNE-EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
UNE-EN 60068-2-30:2000 ENVIRONMENTAL TESTING. PART 2: TESTS.TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE)
UNE-EN 60068-2-30:2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005)
UNE-EN IEC 62892:2020 Extended thermal cycling of PV modules - Test procedure
UNE-EN 15496:2008 Cycles - Requirements and test methods for cycle locks
AENOR UNE-EN 60068-2-30:2006 Environmental tests. Part 2-30: Essays. Test Db: Cyclic moist heat test (12 h + 12 h cycle). (IEC 60068-2-30:2005)
UNE-CEN ISO/TS 20836:2007 EX Microbiology of food and animal feeding stuffs - Polmerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers (ISO/TS 20836:2005)
UNE-EN 13793:2008 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
AENOR UNE-EN 13793:2008 Thermal insulating products for building applications - Determination of behavior under cyclic loading

Swedish Institute for Standards

SS-EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
SS-EN 60068-2-30:2006 Environmental testing - Part 2: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12 hour cycle)
SS-EN IEC 62892:2020 Extended thermal cycling of PV modules - Test procedure
SS-EN 15496:2008 Cycles - Requirements and test methods for cycle locks
SS-EN 15532:2008 Cycles - Terminology

Standards Norway

NS-EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
NS-ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
SN-CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Performance testing for thermal cyclers (ISO/TS 20836:2005)
NS-EN 15532:2008 Cycles — Terminology
NS 2960:1973 Hot and cold water cycling test for pipes and fittings for drainage systems
SN-CEN/TR 16911:2015 Heat meters — Recommendations for circulation water in industrial and district heating systems and their operation
NS-EN 13793:2003 Thermal insulating products for building applications — Determination of behaviour under cyclic loading

Danish Standards Foundation

DANSK DS/ISO 20836:2021 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of microorganisms – Thermal performance testing of thermal cyclers
DANSK DS/EN ISO 20836:2021 Microbiology of the food chain – Polymerase chain reaction (PCR) for the detection of microorganisms – Thermal performance testing of thermal cyclers (ISO 20836:2021)
DS/EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DANSK DS/EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
DANSK DS/ISO 21465:2025 Test method for CMAS corrosion of thermal/environmental barrier coatings under dynamic thermal cycling
DANSK DS/ISO 59040:2025 Circular economy – Product circularity data sheet
DS/EN 16306:2013 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles
DANSK DS/HD 323.2.30 S3:1997 Basic environmental testing procedures - Part 2: Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
DS/EN 15496:2008 Cycles - Requirements and test methods for cycle locks
DANSK DS/CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs – Polymerase chain reaction (PCR) for the detection of food-borne pathogens – Performance testing for thermal cyclers
DS/CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers
DANSK DS/EN IEC 62892:2019 Extended thermal cycling of PV modules – Test procedure
DANSK DS/ISO 59020:2024 Circular economy – Measuring and assessing circularity performance
DANSK DS/IEC 61196-1-209:2016 Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
DS/EN 13793:2004 Thermal insulation products for building applications - Determination of behaviour under cyclic loading
DANSK DS/EN 13793:2003 Thermal insulation products for building applications - Determination of behaviour under cyclic loading
DANSK DS/ISO 17493:2016 Clothing and equipment for protection against heat – Test method for convective heat resistance using a hot air circulating oven
DANSK DS/CEN/TR 16911:2016 Heat meters - Recommendations for circulation water in industrial and district heating systems and their operation
DS/ISO 17493:2002 Clothing and equipment for protection against heat - Test method for convective heat resistance using a hot air circulating oven

GB-REG

REG NASA-LLIS-0810-2000 Lessons Learned ?Thermal Cycling

VN-TCVN

TCVN 7699-2-30-2007 Environmental testing.Part 2-30: Tests.Test A: Damp heat, cyclic (12h+12h cycle)

Gosstandart of Russia

GOST R IEC 60068-2-30-2009 Environmental testing. Part 2-30. Tests. Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.4.5 Test Coupon C - Circuit Continuity, Temperature Cycling, Thermal Cycling, and Construction Integrity
IPC TM-650 2.6.26-2001 DC Current Induced Thermal Cycling Test

International Electrotechnical Commission (IEC)

IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-30:1969 Basic environmental testing procedures - Part 2: Tests - Test Db: Damp heat, cyclic (12+12-hour cycle)
IEC 60068-2-30:1980/AMD1:1985 Amendment 1 - Environmental testing - Part 2: Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
IEC 60068-2-30:1980 Basic environmental testing procedures. Part 2 : Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure
IEC 60068-2-30/AMD1:1985 Basic environmental testing procedures. Part 2 : Tests. Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
IEC PAS 62178:2000 Temperature cycling
IEC 61196-1-209:2016 Coaxial communication cables – Part 1-209: Environmental test methods – Thermal cycling (Edition 1.0)

IPC - Association Connecting Electronics Industries

IPC TM-650 5.5.4.5-1998 Test Coupon C - Circuit Continuity@ Temperature Cycling@ Thermal Cycling@ and Construction Integrity
IPC TM-650 2.6.26A-2014 DC Current Induced Thermal Cycling Test

Canadian Standards Association (CSA)

CAN/CSA-B214-2007 Installation Code for Hydronic Heating Systems
CAN/CSA-B214-2001(R2006) Installation Code for Hydronic Heating Systems
CSA B214-16:2016 Installation code for hydronic heating systems
CSA ANSI Z83.18-2004 Recirculating Direct Gas-Fired Industrial Air Heaters
CSA/AM ANSI Z83.18B-2008-2008 Recirculating Direct Gas-Fired Industrial
CSA/AM ANSI Z83.18A-2005-2005 Recirculating Direct Gas-Fired Industrial Air Heaters
CSA ANSI Z83.4-2013/CSA 3.7-2013 Non-Recirculating Direct Gas-Fired Industrial Air Heaters
CSA 3.7-2003(R2009) Non-Recirculating Direct Gas-Fired Industrial Air Heaters
CSA ANSI Z83.18-2015 Recirculating Direct Gas-Fired Industrial Air Heaters
CSA 3.7-M99:1999 Non-Recirculating Direct Gas-Fired Industrial Air Heaters
CSA ANSI Z83.4-2003/CSA 3.7-2003 Non-Recirculating Direct Gas-Fired Industrial Air Heaters
CSA ANSI Z83.18-2012 Recirculating Direct Gas-Fired Industrial Air Heaters
CSA ANSI Z83.4-2015/CSA 3.7-2015 Non-Recirculating Direct Gas-Fired Industrial Air Heaters
CSA B214-07-2007 Hydronic Heating Systems Installation Code Second Edition
CSA B214-2007 Installation Code for Hydronic Heating Systems, Includes Update No. 1 (2008)
CSA ANSI/IAS U.S. LC 2-1996(R2020) Direct Gas-Fired Circulating Heaters for Agricultural Animal Confinement Buildings

Japanese Industrial Standards Committee (JISC)

JIS S 2112:2011 Gas hydronic heating appliances for domestic use
JIS S 2112:2019 Gas hydronic heating appliances for domestic use
JIS C 60068-2-30:2011 Environmental testing -- Part 2-30: Tests -- Test Db: Damp heat, cyclic (12 h + 12 h cycle)
JIS H 8451:2008 Testing methods for thermal cycle and thermal shock resistance of thermal barrier coatings
JIS A 1432:1995 Method of testing to determine the thermal properties of insulated heating tubes (Hot water circulation procedure)
JIS H 8451:2021E Testing methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
JIS R 2616:1995 Testing method for thermal conductivity of insulating fire bricks by water circulation
JIS B 0225:1960 Cycle threads
JIS H 8451:2021 Testing methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
JIS A 5023:2006 Recycled concrete using recycled aggregate Class L
JIS H 7851:2015 Test method of cyclic heating for thermal-barrier coatings under temperature gradient
JIS A 5023:2012 Recycled concrete using recycled aggregate Class L
JIS B 7757:1995 Forced air circulation oven type thermal accelerated aging testers
JIS T 8023:2006 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven
JIS H 8452:2008 Testing method for thermal cycle resistance of oxidation resistant metallic coatings

Comitato Elettrotecnico Italiano

CEI EN 60068-2-30:2006 Environmental testing - Part 2: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
CEI EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure

AT-ON

ONORM M 7447-1983 Gas-fired circulation heaters and combined water heaters
OENORM EN 16306-2021 Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles

GCC Standardization Organization

BH GSO ISO 20836:2024 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of microorganisms — Thermal performance testing of thermal cyclers
GSO ISO/TS 20836:2013 Microbiology of food and animal feeding stuffs -- Polymerase chain reaction (PCR) for the detection of food-borne pathogens -- Performance testing for thermal cyclers
GSO IEC 62892:2021 Extended thermal cycling of PV modules - Test procedure
GSO IEC 61196-1-209:2021 Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
GSO ISO 8090:2022 Cycles — Terminology
GSO ISO 17493:2013 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven

Lithuanian Standards Office

LST EN 60068-2-30-2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
LST EN 15496-2008 Cycles - Requirements and test methods for cycle locks
LST EN 13793-2004 Thermal insulating products for building applications - Determination of behaviour under cyclic loading

GM Europe

GME L-8C-3-2007 Thermal Shock Cycle Test for Mufflers

International Association of Plumbing and Mechanical Officials

IAPMO PS 116-1999 Hot Water Circulating Devices Which Do not Use a Pump
IAPMO IGC 288-2012 Thermally-actuated mixing shower valve and instant hot water circulation system
IAPMO USEHC 1-2015 2015 Uniform Solar Energy And Hydronics Code
IAPMO /ASSE IGC 384-2023 Digital Mixing Valves for Recirculating Hot Water Systems
IAPMO /ASSE IGC 368-2023 Mechanical Thermostatic Balancing Valves for Domestic Hot Water Recirculating Systems
IAPMO IGC 288-2012(R2020) Thermostatic Shower Mixing Valves with On-Demand Hot-Water CIrculation Systems
IAPMO PS 116-99 Material and Property Standard for Hot Water Circulating Devices Which Do Not Use a Pump

The American Road & Transportation Builders Association

AASHTO R 14-1988 Standard Recommended Practice for Classifying Hot Mix Recycling Agents

American Society for Testing and Materials (ASTM)

ASTM B553-79(1985) Test Method for Thermal Cycling of Electroplated Plastics
ASTM D4552-92(2004) Standard Practice for Classifying Hot-Mix Recycling Agents
ASTM D6944-09e1 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-09 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-03 Standard Test Method for Resistance of Cured Coatings to Thermal Cycling
ASTM D4552/D4552M-10 Standard Practice for Classifying Hot-Mix Recycling Agents
ASTM D6944-15(2025)-25 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-15 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-15(2025) Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D6944-15(2020) Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

SE-SIS

SIS SEN 43 16 04-1971 Environmental testing. Damp heat Test Da and Db, cyclic

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 6692:2008 Cycles - Marking of cycle components
OS GSO ISO 17493:2013 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven

National Aeronautics and Space Administration (NASA)

NASA-CR-1677-1971 Brayton cycle vapor chamber (heat pipe) radiator study

Bureau of Indian Standards

IS/IEC 60068-2-30-2005 Environmental Testing - Part 2 Tests - Section 30 Test Db: Damp Heat Cyclic (12 h + 12 h Cycle)
IS 2106-2-1962 Environmental tests for electronic and electrical equipment-2 - Damp heat (cycling) test
IS 17956-2023 Extended Thermal Cycling Of Pv Modules Test Procedure
IS 10810-49-1984 Methods of Test for Cables - Part 49 : Heating Cycle Test
IS 17468-2020 Clothing and Equipment for Protection against Heat - Test Method for Convective Heat Resistance using a Hot Air Circulating Oven

International Federation of Trucks and Engines

NAVISTAR TMS 9529-2001 Thermal Cycle Test, Charge Air Cooler

Society of Automotive Engineers (SAE)

SAE TS346-1 TS346 Test for Electrical Connectors Damp Heat - Cyclic Test
SAE TS346-1-1987 TS346 Test for Electrical Connectors Damp Heat - Cyclic Test
SAE J1542-1989 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE J1542-2003 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE J1542-2009 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE J1542-2020 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE J1542-2016 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability
SAE J1542-1996 Laboratory Testing of Vehicle and Industrial Heat Exchangers for Thermal Cycle Durability@ Recommended Practice (March 1996)

US-AAMA

AAMA 501.5-2007 Test Method for Thermal Cycling of Exterior Walls
AAMA 505-1998 Dry Shrinkage And Composite Performance Thermal Cycling Test Procedure

SCC

ADS TS346 Test for Electrical Connectors - Damp Heat - Cyclic Test
CAN1-3.7-1977 Direct Gas-Fired Non-Recirculating Make-Up Air Heaters
CAN1-4.3-1977 Circulating Tank, Instantaneous and Large Automatic Storage Type Gas-Water Heaters
AHRI 410-91 Forced-Circulation Air-Cooling and Air-Heating Coils
CAN 1-4.3-M85-1985 Circulating gas water heaters, instantaneous water heaters and large automatic storage water heaters
CAN 1-2.5-M81-1981 Ventilated gas wall radiators, with natural or forced circulation
CAN/CGA-2.5-M86-1986 Ventilated gas wall radiators, with natural or forced circulation

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TS 20836:2016 Microbiology of food and animal feeding stuffs -- Polymerase chain reaction (PCR) for the detection of food-borne pathogens -- Performance testing for thermal cyclers
BH GSO IEC 62892:2022 Extended thermal cycling of PV modules - Test procedure
BH GSO IEC 61196-1-209:2022 Coaxial communication cables - Part 1-209: Environmental test methods - Thermal cycling
BH GSO ISO 8090:2023 Cycles — Terminology
BH GSO ISO 17493:2016 Clothing and equipment for protection against heat -- Test method for convective heat resistance using a hot air circulating oven
BH GSO ISO 16545:2017 Thermal insulating products for building applications -- Determination of behaviour under cyclic loading

CENELEC - European Committee for Electrotechnical Standardization

EN IEC 62892:2019 Extended thermal cycling of PV modules - Test procedure

American National Standards Institute （ANSI)

ANSI/EIA/ECA 364-110:2006 Thermal Cycling Test Procedure for Electrical Connectors
ANSI Z83.18-2004 Recirculating Direct Gas-Fired Industrial Air Heaters
ANSI Z83.18-2000 Recirculating Direct Gas-Fired Industrial Air Heaters
ANSI Z83.18-2015 Recirculating direct gas-fired industrial air heaters
ANSI/IAS LC-2a-1998 Direct Gas-Fired Circulating Heaters for Agricultural Animal Confinement Buildings
ANSI Z83.18-2012 Non-Recirculating Direct Gas-Fired Industrial Air Heaters
ANSI Z83.4-2013 Non-recirculating direct gas-fired industrial air heaters
ANSI Z83.4-2015 Non-recirculating direct gas-fired industrial air heaters
ANSI Z83.4-2012 Recirculating Direct Gas-Fired Industrial Air Heaters
ANSI/ASHRAE 33-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils
ANSI/AIHA Z9.7-2007 Recirculation of Air
ANSI/EIA 364-110:2006(2013) TP-110 Thermal Cycling Test Procedure for Electrical Connectors and Sockets
ANSI/UL 2523-2009 Standard for Safety for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, and Boilers

CU-NC

NC 15-75-1987 Thermotechnics. Heat Transmission Coefficient Values for Use in Refrigerations Calculations

National Association of Corrosion Engineers (NACE)

NACE Paper 08877-2017 Study of thermal insulation materials under cyclic corrosion tests

Standard Association of Australia （SAA）

AS 1099.2DB:1971 Basic environmental testing procedures for electronics and telecommunications purposes, Part 2DB: Tests - Damp heat, cyclic (12 + 12-hour cycle)
AS 60068.2.30:2023 Environmental testing, Part 2.30: Tests — Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005 (ED. 3.0) MOD)
AS ISO 59020:2024 Circular economy - Measuring and assessing circularity performance
AS 2888.8:1993 Methods of testing plastics waste fittings - Thermal cycling test

YU-JUS

JUS H.B8.818-1992 Straight ammonium nitrate fertilizers of high nitrogen content - Methods for the application of thermal cycles

United States Navy

NAVY MIL-U-17293 D-1983 UNIT HEATER, AIR-CIRCULATING, STEAM (SHIPBOARD USE)
NAVY MIL-U-17293 D VALID NOTICE 1-1989 UNIT HEATER, AIR-CIRCULATING, STEAM (SHIPBOARD USE)
NAVY MIL-U-17293 D NOTICE 2-1998 UNIT HEATER, AIR-CIRCULATING, STEAM (SHIPBOARD USE)

American Association

ASSE IAPMO IGC 384-2022 Digital Mixing Valves for Recirculating Hot Water Systems
ASSE IAPMO IGC 384-2023 Digital Mixing Valves for Recirculating Hot Water Systems

IN-BIS

IS 9000 Pt.5/Sec.2-1981 Basic Environmental Test Procedures for Electronic and Electrical Products Part V Damp Heat (Cycle) Test Section 2: 12+12 Hour Cycle
IS 10810 Pt.49-1984 Cable test methods Part 49 Heating cycle test
IS 8436-1989 Thermal Cycling Testing for Evaluating Electroplated Plastics—Method

Cooling Technology Institute

CTI PTB-110-1977 Recirculation

PT-IPQ

NP EN 1397-2000 Heat exchangers Hydronic room fan coil units Test procedures for establishing the performance

Underwriters Laboratories (UL)

UL 710B-2011 Recirculating systems
UL 710B-2021 Recirculating systems
UL 1812 BULLETINS-2001 Report of the Meeting of the Ad Hoc Group of UL for Ducted Heat Recovery Ventilators, Air Exchanger Units, and Nonducted Heat Recovery Ventilators
UL 2523-2018 UL Standard for Safety Solid Fuel-Fired Hydronic Heating Appliances Water Heaters And Boilers
UL 710B-2004 UL Standard for Safety Recirculating Systems First Edition; Reprint with Revisions Through and Including April 11, 2006

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A104C-2005 Temperature Cycling
JEDEC JESD22-A104E-2014 Temperature Cycling
JEDEC JESD22-A122-2007 Power Cycling
JEDEC JESD22-A122A-2016 Power Cycling
JEDEC JESD22-A104F-2020 Temperature Cycling

International Code Council

ICC IMC-2000 CHAPTER 12-2000 Hydronic Piping
ICC IOTFDC-1998 CHAPTER 25-1998 Hydronic Piping

(U.S.) Plastic Pipe Association

PPI RECOMMENDATION E-2016 Recommendation Against Mixing Hydronic Heating Water with Potable Water

American Water Works Association (AWWA)

AWWA WQTC71649 Closing the Urban Water Cycle: Water Recycling in Singapore

Aeronautical Radio Inc.

ARINC 666 ITEM 5.0 Cyclic Redundancy Codes
ARINC 615AP2 ITEM 4.0-1999 Cyclic Redundancy Codes (CRC)

Magyar Szabványügyi Testület

MSZ 8888/27-1985 environmental test. circulating salt spray

Electronic Components, Assemblies and Materials Association

ECA EIA/ECA-364-110-2006 TP-110 Thermal Cycling Test Procedure for Electrical Connectors and Sockets
EIA/ECA-364-110-2006 TP-110 Thermal Cycling Test Procedure for Electrical Connectors and Sockets
EIA_ECA-364-110-2006 TP-110 Thermal Cycling Test Procedure for Electrical Connectors and Sockets

GM Holden Ltd

HOLDEN HN 0156-1977 Environmental Cycling Test Procedure

National Sanitation Foundation (NSF)

NSF SWIM-2002 Swimming Pool, Spa, and Hot Tub Circulation System Components
NSF 50-1985 Circulation System Components for Swimming Pools, Spas, or Hot Tubs

PL-PKN

PN M58769-1973 Circular segmen?ai saws