contrast size

contrast size, Total:299 items.

The international standard classification for "contrast size" includes: Small craft , Moulding equipment , Tobacco, tobacco products and related equipment , Compressors and pneumatic machines .

The Chinese standard classification for "contrast size" includes: Devices for small vessel , Tobacco curing in general , Fasteners , Mechanical gadgets and components , Compressor and fan .

Group Standards of the People's Republic of China

T/ZYLX 002-2019 Zhaoyuan Rice Fragrance
T/CATSI 08004-2023 small production area rice
T/QGCML 2042-2023 Half linen lined craft coat
T/CIPR 067-2022 Large flux reinforced PVDF without lined ultrafiltration membrane
T/CASME 1422-2024 UV cured ultra large diameter lined hose

机械工业部

JB/T 6596-1993 Gear hobbing machine accuracy (maximum workpiece diameter less than 200mm)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 19315-2003 Small craft - Maximum load capacity
GB/T 18822-2002 Small craft less than 8 m length of hull--Determination of maximum propulsion power rating
GB/T 12555.14-1990 Injection mould for plastic large-size mould bases--Liner bushes
GB/T 20847.2-2013 Small craft - Fire protection - Part 2: Craft with a hull length of over 15m
GB/T 20847.1-2007 2007 Small craft—Fire protection—Part 1: Craft with a hull length of up to and including 15 m
GB/T 21137-2007 Leaf tobacco—Determination of strip particle size

Professional Standard - Aquaculture

SC/T 3101-2010 Fresh and frozen large yellow croaker and fresh and frozen small yellow croaker
SC/T 3101-1984 Fresh large yellow croaker Fresh small yellow croaker

Professional Standard - Aviation

HB 3-12-1976 Four-level precision bushing
HB 8073-2002 Miniature bearing lock with close bush
HB 8074-2002 Specification for miniature bearing lock with close bush

Professional Standard - Agriculture

15兽药产品说明书范本第二册-2013 Three paintings, three mountains, thousands of pony rhubarb sodium bicarbonate tablets
17兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, Mountain Rhubarb
12兽药产品说明书范本第二册-2013 Three paintings, three mountains, a thousand ponies, rhubarb end
11兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, and Great Chengqi San
14兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Pony Rhubarb Tincture
13兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses, Big Scutellaria, and Fish Scattered
16兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses and Euphorbias
19兽药产品说明书范本第二册-2013 Three Paintings, Three Mountains, Thousand Little Horses and Little Chaihu San

Taiwan Provincial Standard of the People's Republic of China

CNS 12659-1990 Basic Measurement for Shirts
CNS 2468-1966 Notation of Size for Watches and Clocks

工业和信息化部

JB/T 2236-2020 Reciprocating piston compressor connecting rod small end bushing

Professional Standard - Machinery

JB/T 2236-2005 Reciprocating piston compressor connecting rod small end bushing
JB/T 2236-1991 Reciprocating piston compressor connecting rod small end bushing

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3196-2011 Triticale Wittmack Shida No.1

Jilin Provincial Standard of the People's Republic of China

DB22/ 1749-2012 Small soybeans for natto

Gansu Provincial Standard of the People's Republic of China

DB62/T 595-1999 Wheat Variety Normal University No. 2
DB62/T 4761-2023 Wheat variety Landa 211

Hebei Provincial Standard of the People's Republic of China

DB13/ 114-1991 Chinese cabbage variety Xiaoza 56
DB13/T 246.4-1996 Chinese cabbage variety Xiaoza 50

未注明发布机构

DIN EN ISO 11592-1 E:2015-10 Determination of maximum rated propulsion power using maneuvering speed of small ships Part 1: Ships with hull length less than 8m (Draft)
SAE J 586-2024 Stop Lamp for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width
AS 1141.20.1:2000/Amdt 1:2019 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)

未注明发布机构

SAE J 586-2024 Stop Lamp for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width
AS 1141.20.1:2000/Amdt 1:2019 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)
DIN EN ISO 11592-1 E:2015-10 Determination of maximum rated propulsion power using maneuvering speed of small ships Part 1: Ships with hull length less than 8m (Draft)

Professional Standard - Military and Civilian Products

WJ/Z 373-1995 Cold Extrusion Die Die Liner for Small Caliber Projectile Projectile

SE-SIS

SIS 85 14 10-1970 Shirts. Determination of size
SIS SS 81 73 46-1989 Doors — Sizes, flatness, squareness and roughness — Requirements
SIS SEN 01 01-1954 Description of size and length in electronic technology
SIS 35 92 07 Agricultural carriages. Wheel hub． Maximum speed 30 km/h
SIS 81 76 03-1972 Small steel and metal doors. Sizes
SIS 36 74 11-1974 Trim for doors and windows. Sizes
SIS 81 73 03-1972 Light doorsets. Sizes
SIS SS 81 80 52-1980 Windows — Frame sizes
SIS 61 30 11-1965 Forms. Sizes and disposition
SIS 81 76 02-1972 Steel and metal doors. Sizes
SIS 23 42 05-1973 Plywood. Sizes and form
SIS 62 23 01-1974 Overhead transparencies. Sizes and disposition
SIS 23 63 14-1964 Paper. Expression of size and direction

CH-SNV

SN ISO 4762:1985 Hexagon head bolts - Product grades A and B
VSM 15272-1934 Large taper long milling cutter shank 7/24 No. 30, 40, 50, 60 Bushing

Indonesia Standards

SNI 3423-2008 Testing methods for analysis of grain soils size
SNI 13-6341-2000 Determination of curve related to liberation degree with particle sizes of milling product minerals
SNI 12-4685-1998 Sizes of hockey balls

RO-ASRO

SR 1580-1-1995 Firecley, high-alumina, magnesia and dolomite refractory produces for ladles. Lining bricks.
STAS 7698-1966 Pig iron casing can be forged. 45 degree elbow size
STAS 7695-1966 Pig iron casing can be forged. 45 degree elbow size
STAS 740-1967 Size and units of energy and photometric radiation
STAS 1314/17-1975 MANGANESE ORES AND CONCENTRATES Determination of grain size (fineness)
STAS 8271-1979 Paper for Printing of Booklets, Bulletins and Magazines GROSS SIZES AND WIDTHS
STAS 6861-1982 LINEN OR HEMP AND LIEN TYPE OR HEMP TYPE WOVEN FABRICS Minimum fastness of colours and prints
STAS 2165-1966 Large saw blade turnbuckle size
STAS 7697-1966 The size of the forgeable pig iron casing with inner and outer screw openings and a 45-degree curvature
STAS 7700-1966 Pig iron casing can be forged. 45 degree internal and external thread elbow size
STAS 4867-1969 Threaded small wooden dowel size with connector
STAS 1653-1950 Insulated contact wheel size
STAS 5172-1969 Conical top six-slot thread small wooden nail size
STAS 884-1951 Vibration bearing size
STAS 7193-1967 round button size
STAS 7749-1967 Tape leader size
STAS 5676-1957 Ship equipment. metal dinghy size
STAS 1937-1959 Gear train small capacity narrow gauge carriage. size
STAS 4846-1969 Small dowel size with inner taper notch thread
STAS 7899-1967 Worm extender size
STAS SR ISO 6861:1994 Flax or hemp woven fabrics and flax or hemp type woven fabrics. Minimal fastness of colours and printings
STAS 3953-1967 Steel milling cutter. size/dimensions
STAS 2166-1966 Turnbuckle. Fine tooth saw. size
STAS 7665-1966 Thin screw washer size
STAS 6313-1967 Steel blade turning tool. Tooth knife. size
STAS 4921-1959 Fork size for shoveling gravel
STAS 1913/5-1985 Foundation ground DETERMINATION OF GRAIN SIZE
STAS 359-1967 Steel blade turning tool. Flat knife size
STAS 7667-1966 Thick screw washer size
STAS 7704-1966 Pig iron casing can be forged. Reduce universal joint size
STAS 2113-1966 Regular pattern trapezoidal turnbuckle size
STAS 4234/2-1969 Acid-resistant stoneware. Tube size
STAS 1398-1952 Ship equipment. Shipping boats. Shape and size/dimensions
STAS 4234/4-1969 Acid-resistant stoneware. branch size
STAS 357-1967 Steel blade turning tool. Inside corner knife size
STAS 2234/2-1975 BUTTRESS THREADS Basic size
STAS 4847-1969 Small threaded wooden dowel with notch, tapered joint size
STAS 4234/6-1969 Acid-resistant stoneware. Take over size
STAS 7139/2-1968 Deep side rims. shape and size
STAS 4234/3-1969 Acid-resistant stoneware. Elbow size
STAS 8466-1983 TEXTILES Determination of size content
STAS 704-1974 Fire-rightingeuipment REDUCING SLEEVESS Sizes
SR ISO 5731:1993 Kitchen equipment. Limit size

U.S. Military Regulations and Norms

ARMY MIL-L-43536 F-1989 LINER, COLD WEATHER COAT
ARMY MIL-T-43333 C-1988 TENT LINER, GENERAL PURPOSE, SMALL AND ARCTIC, 10 MAN

Korean Agency for Technology and Standards (KATS)

KS A ISO 13320:2014 Particle size analysis — Laser diffraction methods
KS V ISO 11592-1:2022 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m
KS V ISO 11592-2006(2021) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS V ISO 11592-2006(2016) Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS B 7067-2002(2012) DIMENSION OF SILK LOOM
KS V ISO 11592:2006 Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS V ISO 11592-2021 Small craft less than 8 m length of hull－Determination of maximum propulsion power rating
KS F 1510-2012(2017) Recommended modular coordinating dimension for the sizing of building components
KS E ISO 2325:2002 Coke－Size analysis(Nominal top size 20 mm or less)
KS V ISO 14946-2005(2020) Small craft－Maximum load capacity
KS K 0095-1987 Sizes of Men's Sports Wear
KS K 0095-1983 Sizes of Men's Sports Wear
KS A ISO 13320-1:2014 Particle size analysis Laser diffraction methods - Part 1 General principles
KS A ISO 13320-1:2004 Particle size analysis Laser diffraction methods - Part 1 General principles
KS V 0912-1981(2011) Size of spare parts boxes for marine use
KS A 1608-1999 Dimensions of unit load sizes
KS A 1608-1994 Dimensions of unit load sizes
KS R ISO 6311:2017 Road vehicles－Brake linings－Internal shear strength of lining material－ Test procedure
KS B 5604-1989(2016) Medium Size Biological Microscopes
KS H ISO 12194:2009 Leaf tobacco－Determination of strip particle size

RU-GOST R

GOST 9434-1975 Hard coal coke. Classification by piece sizes
GOST R ISO 13920-2017 Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position
GOST R 52381-2005 Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST R ISO 14946-2013 Small craft. Maximum load capacity
GOST 23409.24-1978 Moulding sands and sand mixtures. Methods for determination of granulometric composition, fineness modulus and average size of sand base grain
GOST 22617.1-1977 Seeds of sugar beet. Methods for determination of purity, seed lot impurity, size uniformity, monospermuity

SCC

AS 2819:1985 Thermometers - Meteorological - Maximum, minimum and ordinary
CAN2-49.63-1975 Coats, Outerwear, Unlined or lightweight Lining, Girls' - Dimensions
BS 692:1936 Specification for meteorological thermometers (maximum minimum and ordinary ) sheathed type
AS O34:1964 Specification for lining from Western Australian hardwoods
UNE-EN ISO 11592:2002 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating. (ISO 11592:2001)
CAN2-49.33-1975 Underpants Knitted, Mid-Thigh Length, Little Boys' and Boys' - Dimensions
CAN2-49.71-1975 Coats, Outerwear, Unlined or Lightweight Lining, Toddlers', Children's and Boys' - Dimensions
MIL MIL-P-48210-1973 PINION AND BUSHING ASSEMBLY (NO S/S DOCUMENT)
BS 642:1951 Calcium carbide (graded sizes)
BS 642:1935 Carbide of calcium (graded sizes)
AENOR UNE-EN ISO 11592-1:2016 Small boats. Determination of the maximum nominal propulsion power using the maneuvering speed. Part 1: Pleasure boats of less than 8 m in length. (ISO 11592-1:2016).
AWWA ACE56250 The Benefits of Lining Large Diameter Pipes With Polyurethane
NS-EN ISO 11592:2001 Small craft less than 8 m length of hull — Determination of maximum propulsion power rating (ISO 11592:2001)
CAN/CGSB 7.2-1994 Adjustable steel posts
AS O101:1967 Specification for lining milled from Australian rainforest timber
AENOR UNE-EN ISO 9094-2:2003 Small boats. Fire protection. Part 2: Vessels of length greater than 15 m. (ISO 9094-2:2002)
CAN/BNQ 2501-062-M88:1988 Soils - Determination of minimum and maximum density of powdery soils - Vibrating table test
AS O63:1958 Specification for lining milled from South-Eastern Australian hardwoods
CAN2-49.60-1975 Overpants, winter Lined, Little Boys' and Boys'- Dimensions
MIL MIL-L-24943-1988 LINER, FIREMAN'S COAT, QUILTED (S/S BY MIL-L-24943A)
AS 1642:1974 Lining milled from Australian rainforest timber
DIN 18126 E:2022 Draft Document - Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness
MIL MIL-L-43466C-1981 LINER, EXTREME COLD WEATHER, PARKA (SUPERSEDING MIL-L-43466B)
AS O68:1960 Specification for lining board from North-Eastern Australian eucalypt hardwoods

VN-TCVN

TCVN 5224-2009 Coke.Size analyses (Nominal top size 20 mm or less)
TCVN 6387-2006 Canned shrimps or prawns

Japanese Industrial Standards Committee (JISC)

JIS A 1224:2000 Test method for minimum and maximum densities of sands
JIS A 1224:2009 Test method for minimum and maximum densities of sands
JIS F 1036:2003 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating
JIS F 1041:2004 Small craft -- Maximum load capacity

United States Navy

NAVY MIL-N-29367 D (1)-1990 NECK TAB, WOMEN'S SHIRT
NAVY MIL-N-29367 D-1990 NECK TAB, WOMEN'S SHIRT
NAVY MIL-I-7075 A-1965 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION, -50 DEG. TO +50 DEG. C, 2 INCH SIZE
NAVY QPL-21718-1-1964 INDICATOR, AIRSPEED, PITOT STATIC, MAXIMUM ALLOWABLE SPEED, 40-400 KNOTS
NAVY MIL-I-21718 (1)-1959 INDICATOR, AIRSPEED, PITOT-STATIC, MAXIMUM ALLOWABLE SPEED, 40-400 KNOTS
NAVY MIL-I-21718 NOTICE 1-1996 INDICATOR, AIRSPEED, PITOT-STATIC, MAXIMUM ALLOWABLE SPEED, 40-400 KNOTS
NAVY MIL-I-21718-1958 INDICATOR, AIRSPEED, PITOT-STATIC, MAXIMUM ALLOWABLE SPEED, 40-400 KNOTS

International Organization for Standardization (ISO)

ISO 2325:1986 Coke; Size analysis (Nominal top size 20 mm or less)
ISO 2325:1972 Title missing - Legacy paper document
ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
ISO 3852:1977 Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density
ISO/IEC 14143-1:1998 Information technology - Software measurement - Functional size measurement - Part 1: Definition of concepts
ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
ISO 2770:1974 Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths
ISO 14946:2001 Small craft - Maximum load capacity
ISO 14946:2021 Small craft - Maximum load capacity
ISO 12194:1995 Leaf tobacco - Determination of strip particle size
ISO 1307:2006 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

BE-NBN

NBN C 58-095-1-1990 Lead Start Storage, Battery Size and Limit Markings
NBN L 01-001-1980 Vocabulary of photometry Notions - Quantities - Units
NBN C 58-095-2-1985 Lead starting batteries, battery size and limit markings
NBN-ISO 269:1991 Correspondance envelopes - Designation and sizes

GSO

GSO ISO 11592:2013 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating
OS GSO ISO 11592:2013 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating
BH GSO ISO 11592:2016 Small craft less than 8 m length of hull -- Determination of maximum propulsion power rating
BH GSO ISO 11592-1:2022 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m
GSO ISO 11592-1:2021 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m

KR-KS

KS V ISO 11592-1-2022 Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m

CZ-CSN

CSN ONA 30 7650-1967 Spokes - size
CSN ISO 8840:1992 Rfractory materials. Determination of bulk density of granular materials (grain density)
CSN 01 3110-1982 Technical drawings.Sizes
CSN 13 7201 Z2-1997 Health gadgets. Scrap accessories. size
CSN 42 0323-1982 Metal testing. Tensile testing of metals. Sheets, strips, thickness from 0,1 up to 0,5 mm
CSN 66 6616-1983 Photography materials on a clearing base. Determination o? minimum density, maximum density and fog density.
CSN 30 3423-1985 Brake lining for cars and light trueks
CSN 63 1101-1983 Bioyols tyres. Sizes
CSN 72 1218-1983 Limestone. Lump size
CSN 46 1085-2-1998 Wheat (Triticum aestivum L.) and barley (Hordeum vulgare L.) - Determination of varietal trueness and purity - Part 2: Protein polyacrylamide gel electrophoresis (PAGE)
CSN 35 6572-1988 Scintillators and containers. Size
CSN 80 8450-1997 Postal Sacks and Sachets

European Committee for Standardization (CEN)

EN 259:1991 Wall coverings in roll form; specification for heavy duty wall coverings
EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021)
EN 13572:2001 Footwear - Test Methods for Uppers, Lining and Insocks - Seam Strength
EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m

Association Francaise de Normalisation

X11-634:1988 Particle size analysis. Characterization of the size and form of the elements of a granular population.
NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
NF X11-634:1988 Granulometry - Characterization of the size and shape of the elements of a granular population
NF V45-010:1988 SALTWATER FISH. CLASSIFICATION BY SIZE.
NF C66-550:2008 Insulated bushings for alternating voltages above 1 000 V.
NF C66-550*NF EN 60137:2017 Insulated bushings for alternating voltages above 1 000 V
NF J95-069-1*NF EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m
NF V45-061:1967 FISH. CARP. CLASSIFICATION BY SIZE.
NF V45-062:1967 FISH. PIKE. CLASSIFICATION BY SIZE.
NF J95-055*NF EN ISO 14946:2021 Small craft - Maximum load capacity
NF V45-050:1988 CRUSTACEA. CLASSIFICATION BY SIZE.
NF V45-058:1988 Cephalopoda. Classification by size.
NF J95-055:2001 Small craft - Maximum load capacity.
NF V45-060:1967 Fishes. Farm-bred trout. Classification by size.

CU-NC

NC 04-06-1966 Test pieces of rectangular section less than 3 mm and not less than 0,1 mm thick

Danish Standards Foundation

DS/EN ISO 11592:2001 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
DS/ISO/IEC 14143-1/Cor 1:2012 Information technology - Software measurement - Functional size measurement - Part 1: Definition of concepts
DS/ISO/IEC 14143-1:2007 Information technology - Software measurement - Functional size measurement - Part 1: Definition of concepts
DS/ISO 14946:2021 Small craft – Maximum load capacity
DS/EN ISO 14946/AC:2005 Small craft - Maximum load capacity
DS/EN ISO 14946:2001 Small craft - Maximum load capacity

CEN - European Committee for Standardization

EN ISO 11592:2001 Small Craft Less Than 8 m Length of Hull - Determination of Maximum Propulsion Power Rating

ZA-SANS

SANS 11592:2008 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
SANS 5644:1988 Accumulated impact strength of toe-puff materials and the degree of softening of toe-puffs
SANS 14946:2008 Small craft - Maximum load capacity

PL-PKN

PN BN 7439-02-1965 Reproduction photography Test methods The testing of sizes and rectangulary
PN P50022-1964 Drawing papers Sizes
PN P50127-1965 Testing methods for produc?s of paper indus?ry Verification of sizes and obliquity of sheets
PN C87007 ArkusZ20-1974 Calcium fertilizers Determination of grain size

American National Standards Institute （ANSI)

ANSI/ASTM F2994:2013 Practice for the Installation of a Single-Sized Cured-In-Place Liner for Manholes of Various Shapes and Sizes

HU-MSZT

MSZ 8100-1980 small mouth large wine bottle
MSZ 15873-1967 General regulations on the size of precast reinforced concrete window modules. size
MSZ 6108-1958 Large metal cutting machinery. Small lathe (all in one) accuracy standard
MSZ 10672-1958 Seed drilling rolls out alley screws for lined pipe
MSZ KGST 1222-1978 The asbestos polymer concept determines the size of the disk and its density
MSZ 5725-1981 Large and small hot rolled hexagonal steel
MNOSZ 18557-1954 Coal testing. size screening
MSZ 2637-1968 Grain size rough analysis
MSZ 19240-1979 1 large and small container interior series
MSZ 220-1974 Key handle, pipe size, tolerance
MSZ 8200/2-1980 Steel push door sizes, names
MSZ KGST 764-1977 Catering industry equipment dimensions
MSZ KGST 531-1977 Radiation Hazard Forms and Magnitudes

International Electrotechnical Commission (IEC)

IEC 60263:2020 Scales and sizes for plotting frequency characteristics and polar diagrams

Underwriters Laboratories (UL)

UL 2576 BULLETIN-2008 OUTLINE OF INVESTIGATION FOR REFRACTORY COMBUSTION CHAMBER LINERS

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 537-2003 Bushing, Sleeve-Press Fit Undersize Inside Diameter REV. 6
AIA/NAS NAS 538-2003 Bushing - Flanged, Press Fit Undersize Inside Diameter REV. 8
AIA/NAS NAS538-2010 BUSHING, FLANGED, PRESS FIT, UNDERSIZE INSIDE DIAMETER REV 9

British Standards Institution (BSI)

BS EN ISO 11592-1:2016 Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull less than 8 m
BS EN 13056:2000 Inland navigation vessels - Stairs with inclination angles of 30 degrees to 45 degrees - Requirements, types
BS EN ISO 14946:2001 Small craft - Maximum load capacity
BS EN ISO 14946:2021 Small craft. Maximum load capacity

CN-STDBOOK

图书 3-8927 Small barcode big world
图书 3-8956 small quality of life

PT-IPQ

NP 1976-1985 fish. Big head fish. Sort by size
NP 2101-1985 fish. Snapper graded by size

International Telecommunication Union (ITU)

ITU-R S.728-1 FRENCH-1995 MAXIMUM PERMISSIBLE LEVEL OF OFF-AXIS e.i.r.p. DENSITY FROM VERY SMALL APERTURE TERMINALS (VSATs)
ITU-R S.728-1 SPANISH-1995 MAXIMUM PERMISSIBLE LEVEL OF OFF-AXIS e.i.r.p. DENSITY FROM VERY SMALL APERTURE TERMINALS (VSATs)
ITU-R S.728-1995 Maximum permissible level of off-axis e.i.r.p. density from very small aperture terminals (VSATs)

AR-IRAM

IRAM 16 507-1962 Diamond size classification
IRAM 5158-1960 Hammer hole size

IETF - Internet Engineering Task Force

RFC 1073-1988 Telnet Window Size Option

ET-QSAE

ES B.B8.102-1973 Determination of pulse size

Lithuanian Standards Office

LST EN ISO 11592:2002 Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001)

German Institute for Standardization

DIN 18126:2022-10 Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness
DIN EN ISO 11592-1:2016-07 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016); German version EN ISO 11592-1:2016
DIN 18126:2022 Soil, investigation and testing - Determination of density of non cohesive soils for maximum and minimum compactness

TR-TSE

TS 1945-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — PARTICLE S?ZE ANALYSIS — SIEVING METHOD
TS 927-1971 SIZES OF CORRES PONDENCE ENVELOPES AND POCKETS

AT-ON

ONORM B 5348-1995 Building hardware - Cones - Sizes

GM North America

GM GMB210-1988 Maximum Grip Gaging Lengths and Minimum Body Lengths for Metric Bolt and Screw Products

ES-UNE

UNE-EN ISO 11592-1:2016 Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS537-2017 BUSHING@ SLEEVE@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (Rev 10)
NAS537-2012 BUSHING@ SLEEVE@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (Rev 9)
NAS537-2011 BUSHING@ SLEEVE@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (Rev 8)
NAS537-2010 BUSHING@ SLEEVE@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (REV 7)
NAS538-2010 BUSHING@ FLANGED@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (REV 9)
NAS537-1982 Bushing@ Sleeve - Press Fit@ Undersize Inside Diameter (Rev. 5)
NAS538-2017 BUSHING@ FLANGED@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (Rev 11)
NAS538-2011 BUSHING@ FLANGED@ PRESS FIT@ UNDERSIZE INSIDE DIAMETER (Rev 10)

IT-UNI

UNI EN ISO 14946:2021 Small craft - Maximum load capacity

American Society for Testing and Materials (ASTM)

ASTM F2985-14(2019) Standard Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry Size Sewers and Conduits
ASTM F2055-09 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM UOP801-14 Size Distribution of Charcoal Particles