column valve

column valve, Total:145 items.

The international standard classification for "column valve" includes: Equipment for the chemical industry , Piping systems , Moulding equipment , Drills, countersinks, reamers , Bolts, screws, studs , Gate valves , Industrial process measurement and control .

The Chinese standard classification for "column valve" includes: Moulds , Combination grippers , Clamping fixtures , Chemical machinery and equipment parts , Marine valve fittings , Technical management , Lubrication and lubrication device , Mould , Cutting tools , Valve , Fastener , Flow capacity and material level instrument , Dedicated processing equipment .

工业和信息化部/国家能源局

JB/T 12526-2015 Industrial valves. Plunger valve
JB/T 12954-2016 Multi-way plunger valve

Group Standards of the People's Republic of China

T/WZBF 029-2023 Industrial valves—Plunger valve
T/CAME 3-2019 Periodic spinal positioning and decompression equipment
T/NSSQ 001-2022 Valveless ceramic plunger pump
T/WZSJD 2343-2024 Fluid system valve positioner

Professional Standard - Aviation

HB 1675-1987 Pillar Localizer
HB 378-1971 Column positioning pin
HB 1737-1987 Through-hole Cylindrical Positioning Pin
HB 4437-1990 Limited Posts
HB 1732-1987 Small Pillar Locating Pin
HB 377-1971 Fixed column positioning pin
HB 1735-1987 Small Blind Screw Hole Cylindrical Positioning Pin
HB 430-1971 Support pillars for automatic positioning
HB 382-1971 Cylindrical Locating Pins
HB 376-1971 Small garden column positioning pin
HB 1733-1987 Small Through-hole Cylindrical Positioning Pin
HB 3227-1979 Pedal slide valve (two-position four-way)
HB 3226-1979 Two-position four-way rotary valve (hydraulic)
HB 3225-1979 Three-position five-way rotary valve (pneumatic)
HB 7026.1-1994 Interchangeable Parts and Locating Piece of Fixture - Small Cylindrical Positioning Pin
HB 1739-1987 Countersink Cylindrical Positioning Pin
HB 7145.8-1995 Large Series Combined Clamp Locating Piece - Cylindrical Positioning Pin
HB 7026.6-1994 Interchangeable Parts and Locating Piece of Fixture - Cyclinder Positioning Pin with Screw
HB 7026.2-1994 Interchangeable Parts and Locating Piece of Fixture - Cylinder Positioning Pin
HB 1734-1987 Small Screw Hole Cylindrical Positioning Pin
HB 7026.3-1994 Interchangeable Parts and Locating Piece of Fixture - Large Cylindrical Positioning Pin
HB 1736-1987 Cylindrical Positioning Pin

Professional Standard - Chemical Industry

HG/T 21551-1995 Plunger Type Dump Valve
HG/T 21551.4-1995 Electric plunger type cast steel discharge valve
HG/T 21551.2-1995 Manual plunger type cast steel discharge valve
HG/T 21551.1-1995 Manual plunger type cast iron discharge valve
HG/T 21551.3-1995 Manual plunger stainless steel discharge valve
HG/T 21551-1995（编制说明） Plunger discharge valve
HG/T 21551.5-1995 Electric plunger cast stainless steel discharge valve

Taiwan Provincial Standard of the People's Republic of China

CNS 397-1978 Parallel Pins
CNS 7186-1984 Addendum Modification of Cylindrical Gears

Professional Standard-Ships

CB/T 4159-2011 Marine flanged plunge valves
CB/T 3265-1994 Level gauge self-closing valve
CB/T 3809-1997 Position switch of two way cartridge valves for ships
CB 20002-2011 Specification for 25.0MPa high pressure air valve pillar of ship

Professional Standard - Railway

TB 1546.3-1984 Cold stamping die limit device limit column

Professional Standard - Electron

SJ/T 10519.6-1994 Components of injection mould for plastics-Stop guide pillars
SJ 2648-1985 Cold press dies-Limited pillars
SJ 3037.2-1988 Combined dies - Locating pillars
SJ 3036.3-1988 Combined dies - Locating pillars

Professional Standard - Machinery

JB/T 7652.2-2008 Limiting and supporting units of stamping dies-Part 2:Limit pillars
JB/T 6358-2006 Counterbores with indexable inserts and detachable pilots
JB/T 8463-1996 Two-position Four-way Reversing Valves 40MPa
JB/T 7652.2-1994 Die limit support device limit column

Professional Standard - Aerospace

QJ 775.15-1983 Small-sized Combination Die - Cylindrical Positioning Plate
QJ 775.14-1983 Small-sized Combination Die - Positioning Column
QJ 2519.1-1993 Limiting column of cold stamping die limit support device
QJ 774.22-1983 Small-sized Combination Die - Supporting for Cylindrical Post Locating

Professional Standard - Urban Construction

CJ/T 3067-1997 Liquid-pressure water lever controlling valve

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 829-1988 Slotted setscrews with dog point
GB/T 25477-2010 Anti-corrosion magnetic trurning column fluid level gauge
GB/T 12234-2007 Bolted bonnet steel gate valves for petroleum and natural gas industries
GB/T 11691-1989 Cast steel suction sea valves
GB/T 946-1988 Slotted raised cheese head with shoulder
GB/T 12234-2007(XG1-2011) Bolted bonnet steel gate valves for petroleum and natural gas industries
GB/T 830-1988 Slotted cheese head screws with shoulder
GB/T 11692-1989 Bronze suction sea valves

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 12234-2019 Bolted bonnet steel gate valves for petroleum and natural gas industries

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 199-2009 Rules for measuring guide post position of bogie

电子工业部

SJ/T 10519.06-1994 Components of injection mould for plastics Stop guide pillars

Professional Standard - Coal

MT 112.2-2008 Hydraulic single prop for coal mine - Part 2: The valve

Professional Standard - Military and Civilian Products

WJ/Z 415-1998 Positioning pins for welding fixture parts

Standard Association of Australia （SAA）

AS B35:1931 Stop, bib, pillar, globe, ball and ferrule, or main cocks
AS 1682:1974 Fire Dampers Metric Units

HU-MSZT

MSZ 14 518-1976 Cylindrical drill pipe check valve
MNOSZ 5239-1953 Water transportation pipeline accessories. Valve column

American Petroleum Institute (API)

API Spec 7NRV-2006(2020) Specification for Drill String Non-return Valves

BE-NBN

NBN E 27-324-1987 Quenched cylindrical pin or positioning cylindrical pin

CZ-CSN

CSN 30 3870-1959 Valve with spring column
CSN 47 7833-1963 Waterer feedvalve cone

Danish Standards Foundation

DS/EN 28 734:1992 Parallel pins, hardened (Dowel pins

Korean Agency for Technology and Standards (KATS)

KS B ISO 8017:2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B ISO 8734-2010(2020) Dowel pins(parallel pins, hardened)
KS V 7226-2014 Marine self closing valves for oil level gauges
KS V 7491-2016 Test procedure for backdraft preventing valve in offshore drill string
KS V 7491-2016(2021) Test procedure for backdraft preventing valve in offshore drill string
KS V 7491-2021 Test procedure for backdraft preventing valve in offshore drill string
KS V 7223-1974 Marine 16kgf/cm2 water gauges with valve
KS V 7223-1994 Marine 16kgf/cm2 water gauges with valve
KS V 7222-2014 Shipbuilding－Oil level gauges with self closing valves
KS V 7223-2009 Shipbuilding-16K water gauges with valve
KS V 7221-2005(2010) Marine 5 K level gauges with valves
KS V 7221-2005 Marine 5 K level gauges with valves
KS V 7222-2021 Shipbuilding－Oil level gauges with self closing valves
KS V 7221-1980 Marine 5 K level gauges with valves

KR-KS

KS B ISO 8017-2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B ISO 8017-2023 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered

AT-ON

ONORM M 7390 Teil.5-1987 Gas cylinder valves with cylindrical valve stemsfor breathing apparatus; types, sizes, connections, threads
ONORM M 7390-5-1997 Gas cylinder valves with cylindrical valve stems for breathing apparatus - Types, dimensions, connections, threads (includes also corrigendum 1997)

FI-SFS

SFS-ISO 8017:1986 In case of interpretation disputes the English text applies
SFS B.5.67-1952 Set screw, cylindrical tip

API - American Petroleum Institute

API SPEC 7NRV-2006 Specification for Drill String Non-return Valves (FIRST EDITION)
API SPEC 7NRV CHINESE-2006 Specification for Drill String Non-return Valves (First Edition)

German Institute for Standardization

DIN 69881-1 Tool holders with prism; prism, prism location; technical delivery conditions
DIN 69881-1:1987 Tool holders with prism; prism, prism location; technical delivery conditions
DIN ISO 10889-1:2006-01 Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004)
DIN 3164:1974 Position indicator for valves for refrigerant circuits
DIN 69881-5:1989-04 Tool holder with prism; form D with cylindrical seat

International Federation of Trucks and Engines

NAVISTAR TMS 5008-1985 VOID - Powdered Metal Seat Latch Stud

GSO

OS GSO ISO 8017:2015 Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars, shouldered

International Organization for Standardization (ISO)

ISO 8017:1985 Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
ISO 8734:1987 Parallel pins; Hardened (Dowel pins)
ISO 8017:2007 Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered

SCC

ULC C352-1975 Guide for the Investigation of Constant-Level Oil Valves
BS ISO 10889-1:1997 Tool holders with cylindrical shank-Cylindrical shank, location bore. Technical delivery conditions
BS 1010:1944 Water taps BIB pillar globe and stop

U.S. Military Regulations and Norms

ARMY MIL-S-71076-1993 SERVOVALVE ASSEMBLY, AZIMUTH: 12561758
ARMY MIL-V-46727 C NOTICE 1-1995 VALVE, THREE-POSITION, FOUR-WAY HYDRAULIC, MANUAL
ARMY MIL-V-46727 C-1986 VALVE, THREE-POSITION, FOUR-WAY HYDRAULIC, MANUAL

ISA - International Society of Automation

ISA RP75.18-1989 Control Valve Position Stability

IN-BIS

IS 5096-1969 Dimensions of round locating studs
IS 5097-1969 Diamond Positioning Stud Dimensions

Japanese Industrial Standards Committee (JISC)

JIS B 1535:2013 Rolling bearings.Self-aligning roller bearings
JIS F 7216:1996 Shipbuilding -- Self closing valves for oil level gauges
JIS B 1535:1993 Rolling bearings -- Self-aligning roller bearings
JIS F 7212:1996 Shipbuilding -- Oil level gauges with self closing valves
JIS F 7213:1996 Shipbuilding -- 16K water gauges with valve
JIS F 7211:1996 Shipbuilding -- 5K level gauges with valves
JIS B 1539:2013 Rolling bearings.Self-aligning thrust roller bearings

Society of Automotive Engineers (SAE)

SAE AIR1660B-1997 Fuel Level Control Valves/Systems
SAE AIR1660B-2007 Fuel Level Control Valves/Systems
SAE AIR1660C-2016 Fuel Level Control Valves/Systems
SAE AIR1660C-2021 Fuel Level Control Valves and Systems

SAE - SAE International

SAE AIR1660-1981 FUEL LEVEL CONTROL VALVES/SYSTEMS
SAE AIR1660A-1987 Fuel Level Control Valves/Systems

IT-UNI

UNI 7572-1976 Positioning studs with underhead support
UNI 7573-1976 Positioning studs supported on rods
UNI 7574-1976 Positioning studs with support ring under head

Defense Logistics Agency

DLA MS52143 VALID NOTICE 1-1986 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS
DLA MS52143-1980 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS
DLA MS52143 NOTICE 3-2003 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS

Instrument Society of America (ISA)

ISA TR75.04.01-1998 Control Valve Position Stability

Spanish Association for Standardization (UNE)

UNE 22713:1986 HYDRAULIC PROPS. CHARACTERISTICS AND TEST FOR RELIVES VALVES.

British Standards Institution (BSI)

BS ISO 10889-1:2004 Tool holders with cylindrical shank - Cylindrical shank, location bore - Technical delivery conditions
BS ISO 8017:2007 Tools for moulding. Guide pillars, straight and shouldered, and locating guide pillars, shouldered
BS 7564-3:1992 Tools for moulding - Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
BS 5163-2:2004 Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification

American Society of Mechanical Engineers (ASME)

ASME B18.3-1986 Socket cap, shoulder, and set screws (Inch series)

YU-JUS

JUS M.C5.088-1990 Control valves. Mounting details for attachment of positioners to conrroi valve actuators