Component instrument

Component instrument, Total:228 items.

The international standard classification for "Component instrument" includes: Metrology and measurement in general , Electronic components in general , Education , Conduits for electrical purposes , Environmental testing .

The Chinese standard classification for "Component instrument" includes: Basic standards and general methods , Monitoring instrument , Marking, packaging, transportation and storage , Material and component for instrument and meter , Special instruments for teaching , Low voltage apparatus in general , Technical management , Environmental Condition and General Test Method .

Professional Standard - Machinery

JB/T 4279.8-1994 Enamelled winding wire test equipment and equipment verification method softening breakdown tester
JB/T 4279.9-1994 Enamelled winding wire test equipment verification method One-way paint scraping tester
JB/T 9464-1999 Ocean environmental conditions for instrumentation
JB/T 9472-2013 General Specifications of Electrical Connectors for Instrument
JB/T 8214.6-1999 QDZ process pneumatic control system Differential pressure transmitters
JB/T 7389-1994 Pneumatic Control System - General Specification for Electrical/Pneumatic Convertor
JB/T 7391-1994 Electrical Control System - General Specification for Modular Temperature Transmitter
JB/T 9232-1999 Specification of knob for instruments
JB/T 8216.2-1999 DDZ-Ⅱ series process electronic control system Controller
JB/T 8214.1-1999 QDZ process pneumatic control system Controller
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 8473-2014 Instrument Valve Group
JB/T 4279.10-1994 Enamelled winding wire test equipment verification method solvent resistance tester
JB/T 9472-1999 General specifications of connectors for instrument
JB/T 4279.6-1994 Enamelled winding wire test equipment equipment verification method peeling tester
JB/T 8473-1996 Instrument Valve Manifolds
JB/T 4279.4-1994 Enamelled winding wire test equipment and equipment verification method springback angle tester
JB/T 8214.3-1999 QDZ process pneumatic control system Setting unit
JB/T 9298-1999 Generic specification of electronic power supply Transformers for use in instrument
JB/T 8214.2-1999 QDZ process pneumatic control system Relay
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 8214.7-1999 QDZ process pneumatic control system Pressure transmitters
JB/T 7489-1994 Repair welding process specification for printed board assembly of instrumentation
JB/T 4279.11-1994 Enamelled winding wire test equipment equipment verification method breakdown voltage tester

工业和信息化部

JB/T 6174-2020 The aging process specification for the PCB assembly ofinstrument
JB/T 7489-2020 The repairing process specification for the PCB assembly of instrument

Group Standards of the People's Republic of China

T/QGCML 4496-2024 Electromagnetic interference resistant infrared thermal imaging core components of photoelectric measuring instruments
T/IMAS 019-2020 Specification of testing crystalline silicon terrestrial solar cell modules
T/QGCML 903-2023 Anti-interference components used in radio frequency instruments
T/QGCML 2362-2023 GIS and HGIS combined electrical and dynamic characteristics tester

Professional Standard - Electricity

DL/T 1951-2018 General technical specification for winding deformation tester of power transformers
DL/T 1952-2018 Calibration specification of power transformers winding deformation tester

Professional Standard - Petroleum

SY/T 5996-1994 Technical Conditions of CBL Combination Instruments

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6877-2008(英文版) "Classification, terminology and numbering for parts and assemblies of the time measuring instruments —Mechanical wrist watch movements"
GB/T 13965-1992 Instrument components－vocabulary
GB/T 34837-2017(英文版) "Classification, terminology and numbering for parts and assemblies of the time measuring instruments-Quartz wrist watch movements"
GB 15934-2008 Electrical accessories - Cord sets and interconnection cord sets
GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products
GB/T 15934-2008 Electrical accessories - Cord sets and interconnection cord sets
GB/T 13965-2010 Instrument components - Vocabulary
GB 21749-2008 Safety requirements for the educational equipment - Vitreous equipment and attachments

Professional Standard - Electron

SJ/Z 9077-1987 Accompanying documents of electronic measuring instrument

National Metrological Verification Regulations of the People's Republic of China

JJG(民航) 0065-2001 Model T1200 Control Display Unit Tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 32065.10-2020 Environmental test methods for oceanographic instruments—Part 10:Salt fog test

Professional Standard - Military and Civilian Products

WJ 1026-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 936-1977 Die-casting mold parts for optical instruments Die-casting mold guide sleeves for optical instruments
WJ 952-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
WJ 940-1977 Die-casting mold parts for optical instruments Die-casting mold supports for optical instruments
WJ 941-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold right foot
WJ 947-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
WJ 944-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
WJ 924-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 1023-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 1022-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 937-1977 Die-casting mold parts for optical instruments Die-casting mold guide pins for optical instruments
WJ 954-1977 Die-casting mold parts for optical instruments Die-casting molds for optical instruments Compression springs
WJ 930-1977 Die-casting mold parts for optical instruments Die-casting mold push rods for optical instruments
WJ 919-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
WJ 921-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
WJ 929-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 923-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 932-1977 Die-casting mold parts for optical instruments Die-casting molds for optical instruments Rectangular push rods
WJ 922-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 951-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
WJ 934-1977 Die-casting mold parts for optical instruments Die-casting mold guide pillars for optical instruments
WJ 928-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 938-1977 Die-casting mold parts for optical instruments Die-casting mold guide pins for optical instruments
WJ 920-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
WJ 1024-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 950-1977 Die-casting mold parts for optical instruments Die-casting mold slider handles for optical instruments
WJ 943-1977 Die-casting mold parts for optical instruments Die-casting mold parts for optical instruments
WJ 949-1977 Die-casting mold parts for optical instruments Die-casting mold plugs for optical instruments
WJ 935-1977 Die-casting mold parts for optical instruments Die-casting mold guide sleeves for optical instruments
WJ 926-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 939-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold guide nail set
WJ 918-1977 Die-casting mold parts for optical instruments Die-casting mold splitter cones for optical instruments
WJ 1001-1994 Optical instrument parts pressure ring
WJ 933-1977 Die-casting mold parts for optical instruments Die-casting mold guide pillars for optical instruments
WJ 942-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold left foot
WJ 953-1977 Die-casting mold parts for optical instruments Die-casting mold sliders for optical instruments
WJ 1014-1994 Circular level for optical instrument parts
WJ 948-1977 Optical instrument die-casting mold parts Optical instrument die-casting mold limit pin
WJ 1025-1976 Standard parts for optical instruments Dryers for optical instruments (restricted standard)
WJ 2186-1994 Optical instrument parts Night vision goggles
WJ 946-1977 Die-casting mold parts for optical instruments Die-casting mold stops for optical instruments
WJ 945-1977 Die-casting mold parts for optical instruments Die-casting mold wedges for optical instruments
WJ 927-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments
WJ 925-1977 Die-casting mold parts for optical instruments Sprue sleeves for die-casting molds for optical instruments

Professional Standard - Agriculture

ZB Y 0003-1984 General technical conditions for instrument packaging
GB 15464-1995 General technical conditions for instrument packaging

Professional Standard - Aviation

HBm 66.53-1990 Mini-truck - Technical Specification for Combination Instrument
HB 3635-1985 Technical Conditions for Components of Measuring Device of Inductance Instrument

Inner Mongolia Provincial Standard of the People's Republic of China

DB15/T 1346-2018 Specification for inspection of crystalline silicon solar cell modules for ground use

Professional Standard-Ships

CB 1085.6-1989 Man-hour quota for instrumentation manufacturing Optical parts processing and optical instrument assembly

Hebei Provincial Standard of the People's Republic of China

DB13/T 1666-2012 Solar cell module electroluminescence detector

未注明发布机构

DIN 16281 E:2019-07 Support for measuring instruments and fittings
CSA C22.2 No.269.4-2017 Surge protective devices — Type 4 — Component assemblies

Professional Standard - Geology

DZ/T 0196.2-1997 General technical conditions for logging instrument - ground instrument (system)
DZ/T 0196.9-1997 General technical conditions for logging instrument - instrument indicator grading

机械工业部

JB/T 6252.5-1992 QDZ--III series pneumatic unit combination instrument operator

SCC

MIL MIL-H-87969-1983 HEAD, MAGNETIC TAPE, INSTRUMENTATION IRIG WIDE BAND GROUP II (NO S/S DOCUMENT)
MIL MIL-G-81559C-1984 GYROSCOPE ASSEMBLIES + ATTITUDE + DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT, PACKAGING OF (SUPERSEDING MIL-G-81559B)
MIL MIL-T-50331-1969 TEST SET, SUBASSEMBLY MX-8046/TPM-22 RECEIVER/TRANSMITTER TESTER( (NO S/S DOCUMENT)
HOLDEN HN 2160-2012 INSTRUMENT PANEL PAD ASSEMBLIES - HONDA PROCESS
HOLDEN HN 2160-2004 INSTRUMENT PANEL PAD ASSEMBLIES - HONDA PROCESS
HOLDEN HN 1082-2009 INSTRUMENT PANEL PAD ASSEMBLIES VACUUM FORMED
CEI EN 61098:2008 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
MIL MIL-S-49087-1976 SCANNER ASSEMBLY FOR AN/PAS-7 (NO S/S DOCUMENT)
DANSK DS/EN 61098:2007 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
BS 1428-E2:1954 Micro beakers micro chemical apparatus general accessory apparatus
DIN VDE 0493-100 E:2008 Draft Document - Radiation protection instrumentation - Periodic testing of portable contamination monitoring assemblies
IEC 60050-394:1995/AMD2:2000 Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments
IEC 60050-394:1995/AMD1:1996 Amendment 1 - International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments
MIL MIL-I-85352/2-1980 INFLATOR ASSEMBLY REMOTE CONTROLLER ASSEMBLY
CSA C22.2 No.269.4-2017(R2022) Surge protective devices - Type 4 - Component assemblies
MIL MIL-DTL-22442/25B-1998 ASSEMBLY, AIRCRAFT AUDIO, MOLDED RUBBER CONNECTOR MECHANICAL GAUGES (SUPERSEDING MIL-C-22442/25A)
MIL MIL-P-62342-1981 PANEL ASSEMBLY, INSTRUMENT: DRIVER'S, M1 TANK (NO S/S DOCUMENT)
MIL MIL-D-28924-1985 DISTRIBUTION BOX AND ARBITRARY SCALE METER ASSEMBLY (NO S/S DOCUMENT)
MIL MIL-G-83172B-1971 GYROSCOPE ASSEMBLY, RATE SBU-13/A (SUPERSEDING MIL-G-83172A)
MIL MIL-PRF-49148D-1999 LENS ASSEMBLY, OBJECTIVE VIEWER, DIRVER'S NIGHT VISION, AN/VVS-2(V) (SUPERSEDING MIL-L-49148C)
BS 1428-J1:1954 Micro-electrlytic apparatus micro chemical apparatus electrolytic accessories
DANSK DS/EN IEC 60799:2021 Electrical accessories – Cord sets and interconnection cord sets
CEI EN 60799:1999 Electrical accessories - Cord sets and interconnection cord sets
MIL MIL-C-48470B-1981 CIRCUIT CARD ASSEMBLY: 11732350 RETICLE PROJECTOR AND ELEVATION SERVO DRIVE (SUPERSEDING MIL-C-48470A)
DANSK DS/EN 60799:1999 Electrical accessories – Cord sets and interconnection cord sets
AS 3565.2:1996 Meters for cold potable water - Combination meters
DIN 18213 E:2021 Draft Document - Optics and optical instruments - Field procedures for testing geodetic and surveying Instruments - GNSS Instruments
BS IEC 60532:1992 Radiation protection instrumentation. Installed dose ratemeters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV

RO-ASRO

STAS R 11612/5-1981 Instrument transformers COMBINED INSTRUMENT TRANSFORMERS Special requirements

Military Standards (MIL-STD)

DOD A-A-53690-1988 VEST ASSEMBLY, TRACTION APPARATUS

SAE - SAE International

SAE AS85352/3-2002 INFLATOR ASSEMBLY GAGE ELEMENTS
SAE ARP727-1961 Rate Gyro Assembly Configuration

Society of Automotive Engineers (SAE)

SAE AS85352/3-2007 INFLATOR ASSEMBLY GAGE ELEMENTS
SAE ARP727-2008 Rate Gyro Assembly Configuration
SAE AS5421-1-1951 AS5421 Filter Pack Assembly
SAE AS5434-2-1951 AS5434 Filter Pack Assembly

American National Standards Institute （ANSI)

ANSI/OEOSC OP1.002-2009 Optics and Electro-Optical Instruments - Optical Elements and Assemblies - Appearance Imperfections

US-FCR

FCR NE-F-3-11T-1972 MASS SPECTROMETER HELIUM LEAK DETECTION FOR INSTRUMENTS AND SMALL COMPONENTS (INACTIVE FOR NEW DESIGN)

Standard Association of Australia （SAA）

AS 60044.3:2004 Instrument transformers - Combined transformers
AS 61083.1:2006 Instruments and software used for measurement in high-voltage impulse tests - Requirements for instruments

United States Navy

NAVY MIL-S-81963 B-1990 SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR
NAVY MIL-C-15987 F (1)-1991 CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH GROUNDING, FOR 440-VOLT PORTABLE EQUIPMENT)
NAVY MIL-C-15987 F-1972 CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH GROUNDING, FOR 440-VOLT PORTABLE EQUIPMENT)
NAVY MIL-W-17247 B-1974 WIND MEASURING SET AN/UMQ-5( ) (COMPONENTS OF)
NAVY MIL-W-17247 B NOTICE 1-1996 WIND MEASURING SET AN/UMQ-5( ) (COMPONENTS OF)
NAVY MIL-C-82632 A-1983 CONNECTOR KIT, SPLICE, SINGLE WIRE
NAVY MIL-C-82632 A NOTICE 1-1998 CONNECTOR KIT, SPLICE, SINGLE WIRE
NAVY MIL-H-21155 D-1990 HARDWARE: FOR BELT, MILITARY POLICE

Korean Agency for Technology and Standards (KATS)

KS W 0613-1976(2012) Equipment standard of aircraft instruments and panel
KS C IEC 60044-3:2003 Instrument transformers－Part 3：Combined transformers
KS C IEC 60799:2002 Electrical accessories-Cord sets and interconnection cord sets
KS A IEC 61137-2016 Radiation protection instrumentation－Installed personnel surface contamination monitoring assembly－Low energy X and gamma emitters
KS B 6603-2005 Extractor set

Underwriters Laboratories (UL)

UL 2703-2021 UL Standard for Safety Mounting Systems Mounting Devices Clamping/Retention Devices And Ground Lugs For Use With Flat-Plate Photovoltaic Modules And Panels
UL 2703-2015 UL Standard for Safety Mounting Systems@ Mounting Devices@ Clamping/Retention Devices@ And Ground Lugs For Use With Flat-Plate Photovoltaic Modules And Panels (First Edition)

U.S. Military Regulations and Norms

ARMY MIL-PRF-49151 D VALID NOTICE 1-2013 Power Adapter Assembly Viewer, Driver's Night Vision, AN/VVS- 2(V)
ARMY MIL-PRF-49147D-1999 LENS ASSEMBLY, EYEPIECE VIEWER, DRIVER'S NIGHT VISION, AN/VVS-2(V)
ARMY MIL-HDBK-705 C-1987 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS
ARMY MIL-HDBK-705 C VALID NOTICE 1-1992 GENERATOR SETS, ELECTRIC, MEASUREMENTS AND INSTRUMENTATION METHODS
ARMY MIL-PRF-13830 B VALID NOTICE 3-2013 Optical Components for Fire Control Instruments; General Specification Governing the Manufacture, Assembly, and Inspection of
ARMY MIL-D-63123 B VALID NOTICE 2-2013 Dispenser Assembly
ARMY MIL-T-70835 A VALID NOTICE 2-2013 Transmitter, Assembly: 11784701

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD51-12-2005 Guidelines for Reporting and Using Electronic Package Thermal Information

British Standards Institution (BSI)

BS EN 60044-3:2003 Instrument transformers - Combined transformers
BS 1428-D4:1963(2010) Specification for Capillary pipettes — Microchemical apparatus — Group D : Volumetric apparatus
BS 1428-D5:1955(2007) Specification for Syringe pattern micro - pipette — Microchemical apparatus — Group D : volumetric apparatus
18/30363551 DC BS EN 61098. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
20/30423328 DC BS EN IEC 61098. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
18/30388914 DC BS EN IEC 61098. Radiation protection instrumentation. Installed personnel surface contamination monitoring assemblies
BS EN 61869-4:2014 Instrument transformers. Additional requirements for combined transformers
BS ISO 10109-12:2004 Optics and optical instruments - Environmental requirements - Conditions of transport for optical instruments

German Institute for Standardization

DIN 96145:2011 Medical instruments - Tissue forceps type Gillies
DIN 58538:1982 Drawing instruments; big bow pencil and big bow combination with interchangeable parts
DIN EN 60044-3:2003 Instrument transformers - Part 3: Combined transformers (IEC 60044-3:2002); German version EN 60044-3:2003
DIN 47636-3:1986 Separable accessories for power cable for bushing with outside cone; U<(Index)m> up to 36 kV, bushing without mounting flange and eyelet-fastening for the separable connector
DIN 12777:1976 Laboratory glassware; Anschuetz thermometer set
DIN VDE 0493-100:2010 Radiation protection instrumentation - Part 100: Periodic testing of portable contamination monitoring assemblies
DIN 16281:2020-12 Support for measuring instruments and fittings
DIN 16281:2020 Support for measuring instruments and fittings
DIN EN 61098:2017 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies (IEC 45B/874/CD:2017)
DIN 12776:1976 Laboratory glassware; Allihn thermometer set
DIN VDE 0626-2:2014 Cord sets and interconnection cord sets - Part 2: Multi distribution sets with appliance couplers (MDAC)

European Committee for Standardization (CEN)

EN ISO 13696:2022 Optics and photonics - Test method for total scattering by optical components (ISO 13696:2022)
EN ISO 13696:2002 Optics and Optical Instruments - Test Methods for Radiation Scattered by Optical Components ISO 13696: 2002; Corrected 2002-09-25

HU-MSZT

MNOSZ 10010-1951 Instrument parts striped U-shaped instrument
MNOSZ 9967-1951 Instrument parts. Tensioner
MNOSZ 10005-1951 Instrument parts. work piece
MNOSZ 9957-1951 Instrument parts. joint tightener
MNOSZ 9969-1951 Instrument parts. iron pliers
MSZ 9968-1957 Instrument parts. drive arm
MNOSZ 9954-1951 Instrument parts. Standable parts
MSZ 9976-1951 Instrument parts. cylindrical retainer
MSZ 9952-1951 Instrument parts. support bracket
MNOSZ 10031-1951 Instrument parts. Tighten the bracket
MNOSZ 9971-1951 Instrument parts tightening nuts
MNOSZ 9962-1951 Instrument parts. Arc circumcenter
MSZ 9974-1962 Instrument parts produced by machines. skids
MSZ 9964-1951 Instrument parts. Double pressure outer center

GSO

GSO IEC 61098:2015 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
GSO IEC 62148-16:2013 Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface
OS GSO IEC 61098:2015 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies
GSO IEC 62149-2:2013 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

Danish Standards Foundation

DS/EN 61098:2008 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies

American Society for Testing and Materials (ASTM)

ASTM F721-18(2022) Standard Specification for Gauge Piping Assemblies

RU-GOST R

GOST 14642-1969 Functional units, sub-assemblies and devices used in instruments for measurement of ionizing radiation. Terms and definitions
GOST 29283-1992 Semiconductor devices. Discrete devices and integrated circuits. Part 5. Optoelectronic devices
GOST 27351-1987 Industrial aggregate-module robots.Functional modules. General specifications

IN-BIS

IS 5415-1969 Code of practice for packaging and packaging of optical and mathematical instruments and components
IS 3222 Pt.1-1966 Specification for instrument screws Part Ⅰ Fasteners for drawing instruments

U.S. Air Force

AIR FORCE MIL-G-83872 A VALID NOTICE 2-2008 GYROSCOPE, DISPLACEMENT, TYPE SBU-23/A
AIR FORCE MIL-G-83172 B VALID NOTICE 2-2008 GYROSCOPE ASSEMBLY, RATE SBU-13/A

International Electrotechnical Commission (IEC)

IEC 60482:1975 Dimensions of electronic instrument modules (for nuclear electronic instruments)
IEC 60044-3:2002 Instrument transformers - Part 3: Combined transformers
IEC 61028:1990/AMD1:1995 Amendment 1 - Electrical measuring instruments - X-Y recorders
IEC 61028:1990/AMD2:1997 Amendment 2 - Electrical measuring instruments - X-Y recorders

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AT-01-2-3-2001 Instrumentation Issues for Monitoring Chiller Plant

ZA-SANS

SANS 60044-3:2004 Instrument transformers Part 3: Combined transformers
SANS 60799:2007 Electrical accessories - Cord sets and interconnection cord sets

Association Francaise de Normalisation

NF EN 61098:2008 Instrumentation for radiation protection - Fixed assemblies for monitoring personnel surface contamination
NF C42-544-3:2003 Instrument transformers - Part 3 : combined transformers.
NF C42-503:1993 Instrument transformers. Part 3 : combined transformers.

AT-ON

ONORM B 2534-1994 Cold water meter assemblies - Requirements and installation conditions and marking of conformity of pre-fabricated water meter assemblies

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0491-9-2-2014 Nuclear power plants - Instrumentation and control important to safety - Safety logic assemblies: Characteristics and test methods (IEC 45A/946/CD:2014)
VDE 0493-100-2010 Strahlenschutz-Messgeraete - Teil 100: Wiederkehrende Pruefung von tragbaren Kontaminationsmonitoren

ES-UNE

UNE-EN 61098:2007 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies (IEC 61098:2003, modified). (Endorsed by AENOR in December of 2007.)

VN-TCVN

TCVN 7680-2007 Electrical accessories.Cord sets and interconnection cord sets

Canadian Standards Association (CSA)

CSA C60044-3-07-CAN/CSA-2007 Instrument transformers - Part 3: Combined transformers the first edition

Lithuanian Standards Office

LST EN 61098-2007 Radiation protection instrumentation - Installed personnel surface contamination monitoring assemblies (IEC 61098:2003, modified)

Others: Optical Instrument Components,Optical Instrument Components,Low voltage components,common components,common components,roof components,Elastic components,heating element,ftir component,Membrane module,density component,component machine,Instrument Components,level components,loop component,Instrument and equipment components,Instrument Components,Component instrument,Component Test Instruments