plastic sleeve reactor
plastic sleeve reactor, Total:118 items.
The international standard classification for "plastic sleeve reactor" includes: Products of the chemical industry in general , Thermosetting materials , Plastics in general .
The Chinese standard classification for "plastic sleeve reactor" includes: Non-metal chemical machinery equipment , Basic standards and general methods for dye , Basic standards and general methods for synthetic resin and plastic , Dye , Manipulation system and its accessories .
Professional Standard - Chemical Industry
- HG/T 3960~3966-2007 Reactive Dyes (2007)
- HG/T 3915-2006 Reacting caldron lined with fluoroplastics
Group Standards of the People's Republic of China
- T/ZZB 1766-2020 Reacting caldron lined with fluoroplastics of Ethylene-Teflon Copolymer（ETFE）
- T/CAMS 159-2023 Injection moulds for plastic reaction cup
- T/ZZB 2065-2021 Hydrogenation reaction feed pump
- T/QGCML 370-2022 Esterification pre-reactor
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
- GB/T 33050-2016 Reactive dyes一Determination of reactivity
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 32681-2016 Plastics. Phenolic resins. Determination of heats and temperatures of reaction by differential scanning calorimetry
- GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- GB/T 25819-2023 Dyestuffs—Liquid reactive black
Professional Standard - Aviation
- HB 5-7-1976 plastic collar
- HB 5-7-1983 Plastic Lantern Ring
- HB 5-6-1983 Plastic Lantern Ring With Bushing
- HB 5-6-1976 Plastic collar with bushing
Guangxi Provincial Standard of the People's Republic of China
- DB45/T 919-2013 Nested Reverse Transcription Polymerase Chain Reaction Assay for Detection of Swine Influenza Virus
未注明发布机构
- DIN 16944:1973 Glass fibre reinforced reaction resin moulding materials; test methods
Professional Standard - Nuclear Industry
- EJ/T 560-1991 Requirements for Irradiation Supervision of Reactor Pressure Vessel Materials
RO-ASRO
- STAS 5887-1968 plastic. Generation of heat-reactive plastic specimens
- STAS 9002-1987 AIRCRAFT FUELS Water reaction
SCC
- CAN/CSA-C88.1-1996(R2011) Power Transformer and Reactor Bushings
- NS-EN 1612-2:2000 Rubber and plastics machines — Reaction moulding machines — Part 2: Safety requirements for reaction moulding plant
- UNE-EN 1612-2:2001 Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant.
- NS-EN 1612-2:2000+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 2: Safety requirements for reaction moulding plant
- MIL MIL-I-36050A-1972 INSERT CABINET, MEDICAL INSTRUMENT AND SUPPLY SET CHEST PLASTIC DRAWERS (SUPERSEDING MIL-I-36050)
- AWWA JAW60921 Journal AWWA — Pipe Section Reactor to Evaluate Chlorine-Wall Reaction
- BS EN ISO 8987:1996 Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
- DANSK DS/EN 1612:2019 Plastics and rubber machines – Reaction moulding machines and plants – Safety requirements
- BS EN ISO 8987:1998 Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
- NS-EN 1612:2019 Plastics and rubber machines — Reaction moulding machines and plants — Safety requirements
- UNE 23729:1990 REACTION TO FIRE TEST OF BUILDING MATERIALS. CALIBRATION OF THE RADIATOR.
Association Francaise de Normalisation
- NF E63-612-2:2000 Rubber and plastics machines - Reaction moulding machines - Part 2 : safety requirements for reaction moulding plant.
- NF EN 1612:2019 Plastics and rubber machines - Reaction molding machines and plants - Safety regulations
- NF C52-300/A11:2002 Reactors.
- NF C52-300:1996 Reactors.
- NF T51-073:1977 Plastics. Reaction to fire.test method to measure the density of smoke.
- NF E63-612*NF EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
- NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
RU-GOST R
- GOST 15882-1984 Plastics. Method of measuring elastic-viscous characteristics and curing kinetics of thermosets
- GOST 23460-1979 Plastics. The dynamic method of technique properties determination of slowely curring thermoseftigs with high content of filler
- GOST 29326-2015 Plastics. Phenolic resins. Determination of reactivity of resols under acid conditions
(U.S.) Ford Automotive Standards
- FORD ESB-M5P11-A-1991 METALLIZE PLASTIC PARTS, REFLECTORS
British Standards Institution (BSI)
- BS EN ISO 11409:1998 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry
- BS EN 1612-2:2000 Rubber and plastics machines - Reaction moulding machines - Safety requirements for reaction moulding plant
- BS EN 1612-2+A1:2000 Plastics and rubber machines. Reaction moulding machines. Safety requirements for reaction moulding plant
- BS EN 1612-2:2000+A1:2008 Plastics and rubber machines — Reaction moulding machines — Part 2 : Safety requirements for reaction moulding plant
- BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS ISO 14848:1998 Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 °C
- BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
- BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- BS EN ISO 8987:2005 Plastics. Phenolic resins. Determination of reactivity on aB-transformat ion test plate
- BS EN 1612:2019 Plastics and rubber machines. Reaction moulding machines and plants. Safety requirements
- BS EN ISO 489:1999 Plastics - Determination of refractive index
- BS EN 1612-1:1997 Rubber and plastics machines - Reaction moulding machines - Safety requirements for metering and mixing units
Korean Agency for Technology and Standards (KATS)
- KS M ISO 11409-2006(2017) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS M ISO 11409-2006(2022) Plastics－Phenolic resins－Determination of heats and temperatures of reaction by differential scanning calorimetry
- KS B 4169-2015 Ejector guide bushes of moulds for plastics
- KS B 4169-2015(2020) Ejector guide bushes of moulds for plastics
- KS M ISO 14848-2006(2017) Plastics－Unsaturated－polyester resins－Determination of reactivity at 130 ℃
- KS M ISO 14848-2006(2022) Plastics－Unsaturated－polyester resins－Determination of reactivity at 130 ℃
- KS M ISO 14848-2022 Plastics－Unsaturated－polyester resins－Determination of reactivity at 130 ℃
- KS M ISO 14848:2006 Plastics-Unsaturated-polyester resins-Determination of reactivity at 130 ℃
- KS B 4168-1990(1995) EJECTOR SLEEVES OF MOULDS FOR PLASTICS
- KS M ISO 8987-2016(2021) Plastics－Phenolic resins－Determination of reactivity on a B-transformation test plate
- KS M ISO 8987-2021 Plastics－Phenolic resins－Determination of reactivity on a B-transformation test plate
- KS M ISO 489:2007 Plastics－Determination of refractive index
- KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
Japanese Industrial Standards Committee (JISC)
- JIS B 5117:1995 Ejector sleeves of moulds for plastics
- JIS B 5118:2000 Ejector guide bushes of moulds for plastics
- JIS B 5118:1994 Support pillar bushes of moulds for plastics
CZ-CSN
- CSN 35 1200-1972 Reactors
- CSN 35 1200-1984 Reactors for AC circuits
GSO
- OS GSO EN 1612-2:2011 Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
- BH GSO ISO 14848:2016 Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C
- GSO ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
- GSO ISO 14848:2015 Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C
- OS GSO ISO 8987:2013 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
- BH GSO ISO 8987:2016 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
- GSO ISO 8987:2013 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate
DIN
- DIN EN 1612-2:2000 Rubber and plastics machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant; English version DIN EN 1612-2
AENOR
- UNE-EN 1612-2:2001+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
Lithuanian Standards Office
- LST EN 1612-2-2003+A1-2008 Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
United States Navy
- NAVY MS16464 REV A-1966 INDUCTOR, (REACTOR) TYPE TF4RX04FB206
- NAVY MS16420 REV A-1956 INDUCTOR, (REACTOR) TYPE TF4RX04LA010
German Institute for Standardization
- DIN 65597:1993-12 Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction
- DIN 16948-2:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials
- DIN EN 1612:2019-12 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements; German version EN 1612:2019
- DIN EN ISO 8987:2005-12 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005); German version EN ISO 8987:2005
- DIN 46228-1:1992-08 Tubular end-sleeves without plastic sleeve
- DIN 46228-1:1992 Tubular end-sleeves without plastic sleeve
- DIN 65597:1993 Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction
- DIN 16944:1988 Glass fibre reinforced reaction resin moulding materials; test methods
- DIN EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
- DIN 16948-1:1975 Glass fibre reinforced reaktion moulding materials in the moulded state; classification and designation
International Organization for Standardization (ISO)
- ISO 14848:1998 Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 °C
- ISO 489:1999 Plastics - Determination of refractive index
- ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
U.S. Military Regulations and Norms
- ARMY MIL-B-1860 E-1977 BUCKLE, SLIDE, PLASTIC
Building Officials and Code Administrators International(U.S.)
- BOCA CHAPTER 43 NFPC COMM-1993 Water-Reactive Materials
- BOCA CHAPTER 43 NFPC-1993 Water-Reactive Materials
IN-BIS
- IS 3287-1965 Specification for industrial lighting fixtures with plastic reflectors
American Society for Testing and Materials (ASTM)
- ASTM D5512-96 Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor
ES-UNE
- UNE-EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements (Endorsed by Asociación Española de Normalización in November of 2019.)
European Committee for Standardization (CEN)
- EN 1612-2:2000 (FAULTY STANDARD)Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant Incorporates Amendment A1: 2008
- EN ISO 489:2022 Plastics - Determination of refractive index (ISO 489:2022)
- EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
KR-KS
- KS M ISO 8987-2016 Plastics－Phenolic resins－Determination of reactivity on a B-transformation test plate
TH-TISI
- TIS 740-2012 Synthetic dyestuffs:reactive dye
European Committee for Electrotechnical Standardization（CENELEC）
- HD 539 S2 CORR 1-1992 CORRIGENDUM Reactors
AT-ON
- ONORM C 9720 Teil.3-1981 Reinforced plastics; Laminates of glass fibre reinforced reaction moulding materials; Designation
YU-JUS
- JUS N.H1.289-1990 Pcmer transformers. Reactors
American National Standards Institute （ANSI)
- ANSI/AWWA B130-2013 Membrane Bioreactor
CEN - European Committee for Standardization
- PREN 1612-2015 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements
ANSI - American National Standards Institute
- B151.25-1987 Plastics machinery - stationary reaction injection molding machines - safety requirements for construction@ care@ and use (SPI)
HU-MSZT
- MSZ 05 29.0821-1972 Plastic screwdriver set
- MSZ 11043-1987 Plastic gloves for household use
SE-SIS
- SIS SS 16 67 06-1986 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method)
NL-NEN
- NEN 3355-1966 met kunststoT lagerous
