Pore diameter of six-well plate

Pore diameter of six-well plate, Total:471 items.

The international standard classification for "Pore diameter of six-well plate" includes: Analytical chemistry in general , Ceramic products , Equipment for processing of minerals , Laboratory ware and related apparatus , Geotextiles , Bolts, screws, studs , Textile fabrics , Photographic equipment. Projectors , Refractories , Fiber and cables , Road vehicle systems , Agricultural machines, implements and equipment .

The Chinese standard classification for "Pore diameter of six-well plate" includes: Separating machinery , Special ceramics , Sieving, Sieve Plate and Sieve Screen , Daily use glass products , Other textile articles , Fastener , Textile articles in general , Lens , Basic standards and general methods , Combination grippers , Fireproof material in general , Optical communication equipment , Fasteners , Saw timber, artificial board machinery and tools .

Group Standards of the People's Republic of China

T/QGCML 741-2023 Pile hole diameter detection device

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1967-1996 Test method for pore diameter of porous ceramic
GB/T 28-1988 Hexagon fit bolts with Split pin hole on shank; Product grade A and B
GB/T 10613-2003 Industrial plate screens—Thickness of 3 mm and above—Round and square holes
GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB 11415-1989 Laboratory Sintered (Porous) Filter Pore Size, Classification and Designation
GB/T 11415-1989 Laboratory sintered(fritted) filters-Porosity grading, classification and designation
GB/T 31.1-2013 Hexagon bolts with split pin hole on shank
GB/T 2679.14-1996 Filter paper and filterboard--Determination of maximum pore diameter
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 10612-2003 Industrial plate screens - Thickness below 3 mm - Round and square holes
GB/T 32.1-2020 Hexagon bolts with wire holes on head
GB/T 45528-2025 Nanotechnology—Measurement of pore size and pore size distribution of nanoporous materials—Fluorescence probe method
GB/T 24219-2009 Determination of ebullition aperture of woven filtering fabric
GB/T 14799-1993 Geotextiles－Determining apparent opening size of a geotextile by sieving
GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method

Professional Standard - Machinery

JB/T 7384.16-1994 Fasteners Plug gauges for bore size of rivets
JB/T 14766-2024 Large diameter horizontal piercer
JB/T 8248.2-1999 Method for measurement for effective aperture and relative aperture of camera lenses
JB/ZQ 4316-2006 Hexagon fit bolts
JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter
JB/T 7384.18-1994 Fasteners Gauges for bore diameter of gaskets

Taiwan Provincial Standard of the People's Republic of China

CNS 4245-1978 Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm Thread Diameter)
CNS 3594-1988 Bore Diameter of Milling Cutters
CNS 7475-1981 Methods of Measurement for Effective Aperture, F - number, Aperture Ratio and T-number of Photographlc Lenses
CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)
CNS 4949-1979 Tapping Screws, Applications and Core Holes
CNS 5674-1980 Cutter Bore

Professional Standard-Ships

CB/T 4436-2019 Synthetic aperture sonar

Professional Standard - Aviation

HB 0-9-1974 Insurance hole for hexagonal parts
HB 4310-1989 Rectangular Hole Back-up Board
HB 0-9-2000 Hexagonal hole thread parts insurance?
HB 4309-1989 Square Hole Back-up Board
HB 1268-1987 Back Plate with Middle Hole
HB 1477-1987 Countersunk Drill Template
HB 0-9-1983 Insurance hole for hexagonal parts
HB 3955-1987 Side-hole Position Plate
HB 1410-1987 Side-hole Position Plate
HB 3961-1987 Countersunk Drill Template
HB 1555-1987 Back Plate with Middle Hole
HB 1291-1987 Countersunk Drill Template
HB 1471-1987 Middle Hole Position Plate

Professional Standard - Ferrous Metallurgy

YB/T 118-2020 Refractory products-Determination of pore size distribution
YB/T 118-1997 Test method for pore size distribution of refractory

未注明发布机构

FORD WM 200-2009 PLUG ?PORT, O-RING HEX RECESS

Professional Standard - Railway

TB/T 1697-1985 Railway Culvert Aperture Series

Professional Standard - Post and Telecommunication

YD/T 816-1996 Multimode optical fibre with large core diameter and large numerical aperture
YD/T 816-2003 Multimode optical fibre with large core diameter and large numerical aperture

Professional Standard - Ocean

HY/T 038-1995 GTL-D Membrane Pore Size Meter

Professional Standard - Building Materials

JC/T 352-1984 Sixteen-hole rotary brick press

Professional Standard - Aerospace

QJ 270-1978 Hex head bolt with hole
QJ 265-1978 Hex head screw bolt with hole
QJ 264-1978 Hex head bolt with hole

Professional Standard - Automobile

QC/T 861-2011 Flat head threaded tubular hexagon blind rivets

Professional Standard - Forestry

LY/T 1361-1999 Single-board Dibber

German Institute for Standardization

DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 66139:2022-12 Pore size analysis - Representation of pore size distributions / Note: Date of issue 2022-11-18*Intended as replacement for DIN 66139 (2012-03).
DIN 66139 E:2010-02 Pore size analysis - Representation of pore size distributions
DIN 66139:2012-03 Pore size analysis - Representation of pore size distributions / Note: To be replaced by DIN 66139 (2022-12).
DIN 66139:2012 Pore size analysis - Representation of pore size distributions
DIN 974-1:1991-05 Diameters of counterbores (holes) for cheese head, pan head and hexagon socket head cap screws
DIN 66139 E:2022-12 Draft Document - Pore size analysis - Representation of pore size distributions
DIN 66139 E:2010 Draft Document - Pore size analysis - Representation of pore size distributions
DIN 974-2:1991-05 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions / Note: DIN 74-3 (1991-05) remains valid alongside this standard until 1996-04-30.
DIN 28182:1964 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:2007-09 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 20311:2002 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 20311:2002-11 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 3357-3:1981 Reduced bore steel ball valves
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 974-2:1991 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN 69104:1981 Grinding wheel outer diameter thickness hole
DIN 87226:2018-05 Draft Document - Scupper - Side cuppers for free decks
DIN 82024:2018 Round eye plates
DIN 87226:1997-04 Scupper for freeboard deck
DIN 331:1924 Drill bits with a diameter of 2 mm
DIN 82024 E:2017-08 Round eye plates
DIN 66140:2022-02 Capillary Flow Porosimetry Measurement of Through-Pore Diameters in Solids
DIN 82024:1990 Round eye plates
DIN EN 13724 Berichtigung 1:2016-08 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2013, Corrigendum to DIN EN 13724:2013-07; German version EN 13724:2013/AC:2016
DIN 3357-5:1981 Reduced bore nonferrous metal ball valves
DIN 24043:1981 Oblong hole perforated plates; dimensions
DIN 24041:2021-06 Perforated plates - Dimensions
DIN 24041:2022-06 Perforated plates - Dimensions
DIN EN 13724:2013-07 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods; German version EN 13724:2013
DIN 24041:1981 Perforated plates - Dimensions
DIN 24041:2021 Perforated plates - Dimensions
DIN 7333:1962 Eyeletts for cardboard labels
DIN 24041 Perforated plates - Dimensions
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 914:1973 Hexagonal cone inner hole combination screw
DIN 24041:2022 Perforated plates - Dimensions
DIN 24041:2002-12 Perforated plates - Dimensions
DIN 53142-1 E:2014-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device

American Society for Testing and Materials (ASTM)

ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM UOP964-11 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
ASTM UOP578-84 Automated Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM UOP425-86 Surface Area, Pore Volume and Pore Diameter of Porous Substances by Nitrogen Adsorption
ASTM UOP578-11 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM UOP578-02 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)

IPC - Association Connecting Electronics Industries

IPC TM-650 2.2.6A-1997 Hole Size Measurement@ Drilled
IPC TM-650 2.2.6-1973 Hole Size Measurement@ Drilled
IPC TM-650 2.2.7A-1986 Hole Size Measurement@ Plated
IPC TR-579 CD-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

British Standards Institution (BSI)

BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS 7591-4:1993(1997) Porosity and pore size distribution of materials - Part 4: Method of evaluation by liquid expulsion
BS ISO 15901-1:2005 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption-Mercury porosimetry
BS ISO 15901-2:2006 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption-Analysis of mesopores and macropores by gas adsorption
BS 7591-1:1992(1999) Porosity and pore size distribution of materials — Part 1 : Method of evaluation by mercury porosimetry
BS EN ISO 10642:2004 Hexagon socket countersunk head screws
BS 1669:1950 Industrial perforated plate
BS ISO 15901-2:2006(2007) Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption
BS 1042-1-1.2:1989 Measurement of fluid flow in closed conduits. Pressure differential devices-Specification for square-edged orifice plates and nozzles (with drain holes, in pipes below 50 mm diameter, as inlet and outlet devices) and other orifice plates
BS ISO 15901-1:2016 Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption. Mercury porosimetry
BS 5731-1:1979 Specification for apertures and mountings for controls for external equipments in protective cabs on agricultural tractors-Apertures
BS ISO 15901-2:2007 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption - Analysis of mesopores and macropores by gas adsorption

Universal Oil Products Company (UOP)

UOP 964-2011 Surface Area, Pore Volume, Average Pore Diameter, and Pore Size Distribution of Porous Materials by Nitrogen Adsorption
UOP 578-2011 Automated Pore Volume and Pore Size Distribution of Porous Substances by Mercury Porosimetry
UOP 425-1986 Surface Area, Pore Volume and Porosity Diameter of Porous Substances by Nitrogen Adsorption
UOP 821-1981 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer

American Society of Mechanical Engineers (ASME)

ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME B16.36-2006 Orifice Flanges
ASME B16.36-2007 Orifice Flanges
ASME B16.36-1988 Orifice flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-2009 Orifice Flanges
ASME B16.36-2025 Orifice Flanges
ASME B16.36-1975 Orifice Flanges
ASME B16.36-2015 Orifice flanges
ASME MFC-14M-2003(R2018) Measurement of Fluid Flow Using Small Bore Precision Orifice Meters

GCC Standardization Organization

GSO ISO 565:2008 Test Sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
BH GSO ISO 565:2024 Test Sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
GSO ISO 13542:2015 Paper and board -- Specification for internal diameters of cores for reels

IN-BIS

IS 7745-1975 Dimensions of lubrication holes, grooves and bores

Danish Standards Foundation

DANSK DS/ISO 13319-1:2021 Determination of particle size distribution – Electrical sensing zone method – Part 1: Aperture/orifice tube method
DS 2389:1993 Centre holes 60 degree. Determination of dimensions
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DANSK DS/EN 13724/AC:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
DS/EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

Korean Agency for Technology and Standards (KATS)

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B ISO 273-2020 Diameter of clearance holes and counterbores for bolts and screws
KS B 5409-2023 Methods for the measurement of the effective aperture, F-number and relative aperture of photographic lenses
KS B 5409-2013(2018) Photographic lenses — Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 1006-1975 Hole Sizes Before Threading
KS B ISO 273-2010(2020) Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS B 5409-1998 Photographic lenses-Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-1982 Photographic lenses — Methods for the measurement of the effective aperture, F-number and relative aperture
KS B 5409-2013 Photographic lenses — Methods for the measurement of the effective aperture, F-number and relative aperture
KS X ISO 10549-2007(2022) Micrographics－A6 size aperture cards
KS B 2305-2006(2021) Nominal size and bore of valves
KS B ISO 10642:2007 Hexagon socket countersunk head screws
KS B ISO 10642-2007(2022) Hexagon socket countersunk head screws
KS G 2626-2019(2024) Steel sheet palettes for pupil
KS B 2305-2021 Nominal size and bore of valves
KS G 2626-2019 Steel sheet palettes for pupil

Society of Automotive Engineers (SAE)

SAE AS9527C SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD,.1380-40 UNJF-3A
SAE AS9527B SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD,.1380-40 UNJF-3A
SAE AS9529A Bolt, Machine - Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.1900-32 UNJF-3A
SAE AS9529C BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9527A Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.1380-40 UNJF-3A
SAE AS9527 Screw, Machine Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.138-40 Unjf-3a
SAE AS9529 Bolt, Machine - Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.190-32 Unjf-3a
SAE AS9528C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
SAE AS9531-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .3125-24 UNJF-3A
SAE AS9527B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9530 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.250-28 UNJF-3A
SAE AS9534 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.500-20 UNJF-3A
SAE AS9530-1998 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNFJ-3A
SAE AS9527A-2007 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9532 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.375-24 UNJF-3A
SAE AS9531 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.3125-24 UNJF-3A
SAE AS9528 Screw, Machine Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.164-36 Unjf-3a
SAE AS9528-2000 Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A
SAE AS9533-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .4375-20 UNJF-3A
SAE AS9528B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .164-36 UNJF-3A
SAE AS9529B BOLT, MACHINE – STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9534-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .500-20 UNJF-3A
SAE AS9532-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .375-24 UNJF-3A
SAE AS9527-2000 Screw@ Machine Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .138-40 UNJF-3A
SAE AS9533 Bolt, Machine - Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.4375-20 UNJF-3A
SAE AS9531-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A
SAE AS9532-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A
SAE AS9527-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A
SAE AS9534-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A
SAE AS9533-2006 BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
SAE AS9528-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
SAE AS9527C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
SAE AS9529B-2016 BOLT@ MACHINE - STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1900-32 UNJF-3A
SAE AS9529C-2022 BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9529-2004 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A
SAE AS9530-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A
SAE AS52600-1-1990 AS52600-699 Nut - Reduced Hexagon - Self Locking - Deep Counterbored - Metric Series
SAE AS9529A-2007 BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
SAE AS91001C Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS91001A Nut - Hexagon, Drilled, Boss Connection, Cres - Uns S30400
SAE AS91001D Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS91001B Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS91001E NUT, HEXAGON, DRILLED, BOSS, CONNECTION, CRES - UNS S30400
SAE AS9686 Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.250-28 Unjf-3a
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9583B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.1900-32 UNJF-3A
SAE AS9585B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.3125-24 UNJF-3A
SAE AS9687 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.3125-24 Unfj-3a
SAE AS9585C BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.3125-24 UNJF-3A
SAE AS9685 Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.190-32 Unjf-3a
SAE AS9587 Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank,.4375-20 UNJF-3A
SAE AS9686B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.2500-28 UNJF-3A
SAE AS9588A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min,.5000-20 UNJF-3A
SAE AS9588C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN,.5000-20 UNJF-3A
SAE AS9587B Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min,.4375-20 UNJF-3A
SAE AS9589-2006 BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, .5625-18 UNJF-3A
SAE AS9587A Bolt, Machine - Hexagon Head, Drilled, 6 Holes, Full Shank, UNS S66286, 130 ksi min,.4375-20 UNJF-3A
SAE AS9686A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.2500-28 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9589 Bolt, Machine-Hexagon Head, Drilled, 6 Holes, Full Shank,.5625-18 UNJF-3A
SAE AS4760-4-1971 AS4760 1/4" Bore. Sediment Drain Valve
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9584-1999 Bolt@ Machine-Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .250-28 UNJF-3A
SAE AS9505 Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Full Shank, Ams 5731,.50-20 Unjf-3a
SAE AS9686C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.2500-28 UNJF-3A
SAE AS9685C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9685A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.1900-32 UNJF-3A
SAE AS9685D BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9685B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9585-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .3125-24 UNJF-3A
SAE AS9500 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Full Shank, Ams 5731,.190-32 Unjf-3a
SAE AS9687C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.3125-24 UNJF-3A
SAE AS9687A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.3125-24 UNJF-3A
SAE AS9588-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .500-20 UNJF-3A
SAE AS9583-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .190-32 UNJF-3A
SAE AS3626B-2023 NUT, SELF-LOCKING, DOUBLE HEXAGON, REDUCED ENVELOPE, UNS S66286, COUNTERBORED SILVER PLATED THREADS ONLY
SAE AS9687B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.3125-24 UNJF-3A
SAE AS3403 Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708,.375-24 UNJF-3A
SAE AS9816 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, AMS 5643,.190-32 UNJF-3A
SAE AS3400 Bolt, Machine-Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708,.190-32 UNJF-3A
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE AS3406-2006 BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS 5708, .3125-24 UNJF-3A
SAE AS9586-1999 Bolt@ Machine - Hexagon Head@ Drilled@ 6 Holes@ Full Shank@ .375-24 UNJF-3A (FSC 5306)
SAE AS3120B-2020 BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, UNS S66286, .5625-18 UNJF-3A
SAE AS3401 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, AMS 5708,.250-28 UNJF-3A
SAE AS3114-2012 BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, CRES AMS5731, .190-32 UNJF-3A
SAE AS9821-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ AMS 5643@ .500-20 UNJF-3A
SAE AS3109 Bolt, Machine - Hexagon Head, Drilled 1 Hole, PD Shank, Cres AMS 5731,.3125-24 UNJF-3A
SAE AS9821-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS 5643, .500-20 UNJF-3A
SAE AS3106 Screw, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731,.164-36 Unjf-3a
SAE AS3107 Bolt, Machine - Hexagon Head, Drilled 1 Hole, Pd Shank, Cres Ams 5731,.190-32 Unjf-3a
SAE AS9505-1999 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ Full Shank@ AMS 5731@ .500-20 UNJF-3A
SAE AS9816-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, AMS 5643, .190-32 UNJF-3A

Association Francaise de Normalisation

NF E81-061:1991 Punching and stamping. Aperture and pitch of perforated materiel with round holes and square holes.
NF G32-302:1981 Clothing - Clothing accessories - 2 or 4 hole buttons - Hole diameters and spacings
NF E25-170*NF EN ISO 23429:2004 Gauging of hexagon sockets
NF L81-450:1954 Section of trimming for aperture edges (rech.).
NF E25-146:2004 Hexagon socket countersunk head screws.
NF T54-116:1973 Plastic. Sheets. Determination of resistance to perforation. Perforametre method.

International Organization for Standardization (ISO)

ISO 2194 Industrial screens - Woven wire cloth, perforated plate and electroformed sheet - Designation and nominal sizes of openings
ISO 13319-1:2021 Determination of particle size distribution - Electrical sensing zone method - Part 1: Aperture/orifice tube method
ISO 23429:2004 Gauging of hexagon sockets
ISO 2194:1972 Wire screens and plate screens for industrial purposes — Nominal sizes of apertures
ISO 10642:2004 Hexagon socket countersunk head screws
ISO 10642:1997 Hexagon socket countersunk head screws
ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings

SE-SIS

SIS SMS 1724-1965 Drilling diameter
SIS SMS 210-1944 Bearings. Hole Radius and Shaft Height
SIS SMS 1523-1950 Self-turning screws, hole diameter, datum
SIS SS 2173-1988 Diameters of spot facings, counterbores and countersinks - MScrews and nuts with ISO metric screw threads and tapping screws
SIS SEN 86 02 08 Medical X-ray materials, one plan aperture

CZ-CSN

CSN 50 0405-1994 Filter papers-Determination of the mean flow pore diameter
CSN 50 0402-1994 Filter papers. Determination of the maximum pore diameter
CSN 72 2613-1966 Burnt facing bricks perforated
CSN 10 7015-1980 Vacuum technology. Bore diameters.
CSN 15 3330-1966 Perforated plates in test sieves
CSN 24 3168-1987 Cranks of machine vices with hexagonal hole

Spanish Association for Standardization (UNE)

AENOR UNE 26011:1950 INSTRUMENT HOLE DIAMETERS
UNE 17020:1957 CUT THREADED SCREWS. HOLE DIAMETER.
UNE-EN 2309:1992 AEROSPACE SERIES. HOLE SIZES FOR SOLID RIVETS.
AENOR UNE-EN 13724/AC:2016 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
UNE-EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
UNE-EN 13724:2013/AC:2016 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

Japanese Industrial Standards Committee (JISC)

JIS B 1001:1985 Diameter of clearance holes and counterbores for bolts and screws
JIS B 1004:1975 Hole sizes before threading
JIS B 7095:1997 Photographic lenses -- Methods for the measurement of the effective aperture, F-number and relative aperture
JIS B 1016:2006 Gauging of hexagon sockets
JIS B 1004:2009 Hole sizes before threading
JIS Z 8831-2:2010 Pore size distribution and porosity of solid materials -- Part 2: Analysis of mesopores and macropores by gas adsorption
JIS B 2001:1987 Nominal size and bore of valves
JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
JIS G 3554:1983 Hexagonal wire netting

ESDU - Engineering Sciences Data Unit

ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.

Defense Logistics Agency

DLA AN103101 THRU AN103200 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103501 THRU AN103600 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN103001 THRU AN103100 REV 5-1987 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104401 THRU AN104500 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102901 THRU AN103000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN104001 THRU AN104100 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN102801 THRU AN102900 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103901 THRU AN104000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN102901 THRU AN103000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104301 THRU AN104400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN102801 THRU AN102900 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2-1969 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104201 THRU AN104300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN107701 THRU AN107800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108101 THRU AN108200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA AN103101 THRU AN103200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103801 THRU AN103900 REV 2 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN103101 THRU AN103200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 1-19 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104101 THRU AN104200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104401 THRU AN104500 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102801 THRU AN102900 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103601 THRU AN103700 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN102901 THRU AN103000 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103001 THRU AN103100 REV 5 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103301 THRU AN103400 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103701 THRU AN103800 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104401 THRU AN104500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106601 THRU AN106700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN107301 THRU AN107400 REV 3 (1)-2003 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN107301 THRU AN107400 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN106401 THRU AN106500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107401 THRU AN107500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106701 THRU AN106800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN108001 THRU AN108100 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN107501 THRU AN107600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN107401 THRU AN107500 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106601 THRU AN106700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN106501 THRU AN106600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107201 THRU AN107300 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN106701 THRU AN106800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN107201 THRU AN107300 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN107701 THRU AN107800 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108101 THRU AN108200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA AN106401 THRU AN106500 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107101 THRU AN107200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN108001 THRU AN108100 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN107101 THRU AN107200 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN108001 THRU AN108100 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106501 THRU AN106600 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107501 THRU AN107600 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN106801 THRU AN106900 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .4375-20
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .375-24
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .750-16
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN106501 THRU AN106600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .250-28
DLA AN107001 THRU AN107100 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .5625-18
DLA AN107501 THRU AN107600 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .3125-24
DLA AN106401 THRU AN106500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .190-32
DLA AN106901 THRU AN107000 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .500-20
DLA AN107401 THRU AN107500 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .250-28
DLA AN106701 THRU AN106800 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN107201 THRU AN107300 REV 3 VALID NOTICE 1-19 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN106601 THRU AN106700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .3125-24
DLA AN107101 THRU AN107200 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 1 Hole, .625-18
DLA AN107601 THRU AN107700 REV 3 VALID NOTICE 2-20 Bolt - Cres Drilled Hex Head, 6 Holes, .375-24

U.S. Air Force

AIR FORCE A-A-59883 A-2011 BORESCOPE

European Committee for Standardization (CEN)

EN 23016:1989 Hole Sizes for Solid Rivets

Gosstandart of Russia

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 14802-1985 Rivets (high precision). Hole diameters for rivets, urset head dimensions and length selection
GOST 19257-1973 Holes for threading metric thread. Diameters

North Atlantic Treaty Organization Standards Agency

STANAG 3212-1998 DIAMETERS FOR GRAVITY FILLING ORIFICES

Standards Norway

NS 5075:1973 Rolling bearings - Bore diametres
NS-EN 13724:2013 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods
NS 2636:1969 Manhole cover for recused coaming

PL-PKN

PN M59109-1971 Abrasive wheels External diameters and holes

Ente Nazionale Italiano di Unificazione

UNI 10481:1995 Filter paper. Determination of equivalent diameter of maximum, minimum and mean flow pore.
UNI EN ISO 7380:2005 Hexagon socket button head screws
UNI EN ISO 10323:1996 Tental rotary instruments. Bore diameters for discs and wheels.

Bureau of Indian Standards

IS 18061-2023 Selection Of Aperture Size Percentage Open Area And Wire Diameter Combination For Industrial Screens - Guidelines
IS 10892-2024 Recommendations for Aperture Size of Sieves for Seed Cleaners

IET - Institution of Engineering and Technology

VERY SML APRT TERM-1992 Very Small Aperture Terminals (VSATs)
APRT ANT DIFF THEO-1981 Aperture Antennas and Diffraction Theory

VN-TCVN

TCVN 330-1986 Round nuts with radially spacrd holes

CU-NC

NC 42-10-1968 Porosity in paper and board

Indonesia Standards

SNI 08-4418-1997 Test method for pore size of geotextile

WRC - Welding Research Council

BULLETIN 80-1962 ANALYSIS OF A PERFORATED CIRCULAR PLATE CONTAINING A RECTANGULAR ARRAY OF HOLES STRESSES AND DEFLECTIONS IN LATERALLY LOADED PERFORATED PLATES

Swedish Institute for Standards

SS 2173:1987 Diameters of spot facings, counterbores and countersinks - Screws and nuts with ISO metric screw threads and tapping screws
SS-ISO 10549:2001 Micrographics - A6 size aperture cards

American National Standards Institute （ANSI)

ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ANSI/ASME B16.36-2009 Orifice Flanges
ANSI/ASME B16.36-2020 Orifice Flanges
ANSI/TIA/EIA 455-134-1996 Measurement of Connector Ferrule Hole Inside Diameter
ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield

TIA - Telecommunications Industry Association

EIA/TIA-455-167A-1992 FOTP-167 Mode Field Diameter@ Variable Aperture in the Far Field

GM North America

GM VOL I SEC D-1966-c Section D - Recommended Hole Sizes for Tapping Screws
GM GMD200-1988 Recommended Hole Sizes for Metric Tapping Screws General

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0472-254-1985*DIN VDE 0472-254:1985 Testing of cables, wires and flexible cords; numerical aperture of multimode optical fibres DIN VDE 0472 Part 254

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 15901-2:2016 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption -- Part 2: Analysis of mesopores and macropores by gas adsorption

IT-UNI

UNI 6206-1968 Ship drainage holes. Steel Deck Drain Cover
UNI 6182-1968 Ship drainage holes. Drainage holes for steel decks with thickness ≥20mm
UNI 6191-1968 Ship drainage holes. Solids for deck scuppers
UNI 6183-1968 Ship drainage holes. Covered scuppers for steel decking below strength decking

Magyar Szabványügyi Testület

MSZ 13067-1975 Hexagonal hole specifications on assembly tools
MSZ 3996-1968 120 degree conical drill diameter = 16-40

AT-ON

ONORM M 1807 Teil.3-1975 Counterbores for hexagon bolts and nuts

SCC

ADS AS4523 1/4" Bore Sediment Valve

Lithuanian Standards Office

LST EN 13724-2003 Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods

RO-ASRO

STAS 13083-1992 Determination of pores with radius dimension of 0...300 A by adsorption of nitrogen on pored solids
STAS 10948-1988 PERFORATED PLATES FOR GENERAL PURPOSE
STAS 13072-1992 Determination of pores volume having the radius of 0 ... 300 A by adsorbtion of nitrogen on porous solids
STAS 1624-1992 Cellular wooden plates for inner doors

NL-NEN

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

CH-SNV

SN EN 54 Teil 9-1984 Components of automatic fire detection SystemsPart 9: Fire sensitivity festOrganes constitutifs des systemes de detection automatique d'incendiePartie 9: Essais de sensibilite sur foyers types

BE-NBN

NBN E 66-101-1973 The diameter of the drill for the front screw hole. ISO metric triangle thread and pipe thread

FI-SFS

SFS C.5.25-1953 Uppoasennusrasian 2-aukkoinen peitelevy
SFS C.5.27-1953 Uppoasennusrasian 4-aukkoinen peitelevy
SFS C.5.28-1953 Uppoasennusrasian 5-aukkoinen peitelevy
SFS C.5.26-1953 Uppoasennusrasian 3-aukkoinen peitelevy

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-579-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

PT-IPQ

NP EN ISO 4762:2000 Hexagon socket head cap screws(ISO 4762-1997)

Others: Pore diameter of six-well plate