geometric phase

geometric phase, Total:102 items.

The international standard classification for "geometric phase" includes: Limits and fits , Photographic equipment. Projectors .

The Chinese standard classification for "geometric phase" includes: Basic standards and general methods , Camera and photograph instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1182-2008 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form orientation location and run-out
GB/T 43042-2023 Digital cameras—Geometric distortion (GD) measurements
GB/T 13319-2003 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1182-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form,orientation,location and run-out

Military Standard of the People's Republic of China-General Armament Department

GJB 4259-2001 Geometric precision correction rules for photographic reconnaissance satellite photos

AT-ON

ONORM A 6420-1957 geometric positioning
ONORM A 6433-1986 Geometry; quantities and units
ONORM ISO 5458:1989 Technical drawings; geometrical tolerancing; positional tolerancing

German Institute for Standardization

DIN EN ISO 5458:1999 Geometrical product specification (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998
DIN EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DIN EN ISO 1101 E:2014-10 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1101 E:2015-07 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1101 E:2005-06 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1101:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 1101:2008 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005
DIN EN ISO 5458:2018-11 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018); German version EN ISO 5458:2018
DIN EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DIN EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); English version of DIN EN ISO 1101:2006-02

Danish Standards Foundation

DS/EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
DS/EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DS/ISO 5458:1991 Technical drawings. Geometrical tolerancing. Positional tolerancing
DS/ISO 3662:1989 Hydraulic fluid power. Pumps and motors. Geometric displacements

Korean Agency for Technology and Standards (KATS)

KS B ISO 5458:2014 Geometrical Product Specifications(GPS) — Geometrical tolerancing — Positional tolerancing
KS B ISO 5458:2008 Geometrical Product Specifications(GPS)-Geometrical tolerancing-Positional tolerancing
KS A ISO 1503:2011 Spatial orientation and direction of movement－Ergonomic requirements
KS A ISO 1101:2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101:2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS B 0148-2006 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B 0148-1992(2002) TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B ISO 3662-2006(2011) Hydraulic fluid power－Pumps and motors－Geometric displacements
KS B ISO 5458:2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification

British Standards Institution (BSI)

BS ISO 11562:1997 Geometric product specifications (GPS). Surface texture. Profile method. Metrological characteristics of phase correct filters
BS EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
BS EN ISO 1101:2013 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS EN ISO 5458:2018 Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
BS ISO 17850:2015 Photography. Digital cameras. Geometric distortion (GD) measurements

Association Francaise de Normalisation

NF E04-559:1999 Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing.
NF E04-552:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF E04-552:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out.
NF EN ISO 1101:2017 Geometrical product specification (GPS) - Geometrical tolerance - Shape, orientation, position and runout tolerance
NF E04-552*NF EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF F58-600-5/IN1:2010 Railway applications - Track - Track geometry quality - Part 5 : geometric quality levels - Plain line.
NF F58-600-5:2010 Railway applications - Track - Track geometry quality - Part 5 : geometric quality levels - Plain line.
NF EN ISO 5458:2018 Geometric Product Specification (GPS) - Geometric Tolerancing - Geometric Specification of Groups of Elements and Combined Geometric Specification
NF E04-559*NF EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification

VN-TCVN

TCVN 7295-2003 Geometrical product specification (GPS).Geometrical tolerancing.Positional tolerancing
TCVN 5906-2007 Geometrical Product Specifications (GPS).Geometrical tolerancing.Tolerances of form, orientation, location and run-out

RO-ASRO

STAS 738-1960 Geometric dimensions. Unit of measure
STAS 7788-1982 Hydraulic drives GEOMETRIC DISPLACEMENTS
STAS 7385/1-1985 Technical drawings GEOMETRICAI. TOLERANCES Tolerances of form, orientation, location and run-out

South African Bureau of Standard

SANS 10111-2-4:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing

SCC

NS-EN ISO 5458:1998 Geometrical product specifications (GPS) — Geometrical tolerancing — Positional tolerancing (ISO 5458:1998)
DIN EN ISO 5458 E:2016 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - Positional and pattern tolerancing (ISO/DIS 5458.2:2016); German and English version prEN ISO 5458:2016
DANSK DS/EN ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out (ISO 1101:2017)
NS-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
NS-EN ISO 1101:2005 Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out (ISO 1101:2004)
ISO 1101:2012/DAmd 1 Geometrical product specifications (GPS) — Geometrical tolerance — Tolerance of shape, orientation, position and runout — Amendment 1
DANSK DS/ISO 17850:2015 Photography - Digital cameras - Geometric distortion (GD) measurements
DANSK DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
NS-ISO 5458:1998 Technical drawings — Geometrical tolerancing — Positional tolerancing (ISO 5458:1987)

CEN - European Committee for Standardization

EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out

Spanish Association for Standardization (UNE)

UNE-EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998).
UNE-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
UNE-EN ISO 5458:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)

European Committee for Standardization (CEN)

EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and runout
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out
EN ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing ISO 5458:1998

Japanese Industrial Standards Committee (JISC)

JIS Z 8907:1987 Geometrical orientation and directions of movements
JIS B 0025:1991 Technical drawings -- Geometrical tolerancing -- positional tolerancing
JIS B 0025:1998 Technical drawings -- Geometrical tolerancing -- Positional tolerancing
JIS B 0021:1998 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out

Lithuanian Standards Office

LST EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998)
LST EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)

International Organization for Standardization (ISO)

ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
ISO 1101:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO 5458:1987 Technical drawings; Geometrical tolerancing; Positional tolerancing
ISO 17850:2015 Photography - Digital cameras - Geometric distortion (GD) measurements
ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification

CZ-CSN

CSN ISO 1503:1994 Geometrical orientation and directions of movements
CSN 21 0317-1981 Forming machines. Automatic transfer presses for flat forming. Geometrical precision

GSO

GSO ISO 1101:2021 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
BH GSO ISO 1101:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
GSO ISO 5458:2021 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
BH GSO ISO 5458:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
BH GSO ISO 17850:2022 Photography — Digital cameras — Geometric distortion (GD) measurements
GSO ISO 17850:2021 Photography — Digital cameras — Geometric distortion (GD) measurements
BH GSO ISO 22081:2023 Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications

KR-KS

KS A ISO 1101-2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101-2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS B ISO 5458-2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification

YU-JUS

JUS ISO 5459:1992 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances

PL-PKN

PN M01122-1993 Technical drawings. Geometrical tolerancing. Positional tolerancing

RU-GOST R

GOST R 53442-2015 Basic norms of interchangeability. Geometrical product specifications. Geometrical tolerancing. Tolerances of form, orientation, location and run-out

American National Standards Institute （ANSI)

ANSI/INCITS/ISO 19116:2004 Geographic information ?Positioning services Adopted by INCITS