Flow voltage regulation

Flow voltage regulation, Total:142 items.

The international standard classification for "Flow voltage regulation" includes: Valves , Agricultural tractors and trailed vehicles , Valves in general , Anaesthetic, respiratory and reanimation equipment , Electrical and electronic equipment .

The Chinese standard classification for "Flow voltage regulation" includes: Flow capacity and material level instrument , Electrical devices and instruments , Actuator , Surgery devices , Electronic and electrical equipment .

Group Standards of the People's Republic of China

T/CAS 234-2014 Air Jet Type Room Air Conditioners
T/CHES 63-2022 Technical guideline for plunger control valve
T/CASME 472-2023 Self operated single seat pressure regulating valve
T/CI 044-2023 Hydraulic assisted steering regulator
T/CAS 399-2020 Energy-saving type DC driven air-conditioner
T/WZBF 062-2024 Electric low shear flow control device
T/QGCML 1946-2023 Low pressure regulating nitrogen seal self-operated regulating valve
T/JSQA 033-2020 Electronic voltage regulator for automotive alternator

Military Standard of the People's Republic of China-General Armament Department

GJB 515-1988 Technical specifications of marine alternator voltage regulator
GJB 515B-2018 Specification for voltage regulating devices for marine alternators
GJB 515A-1999 Specification for voltage regulating devices for marine alternators

Professional Standard - Machinery

JB/T 11049-2010 Self-opreted pressure regulator
JB/T 6709-1993 Specifications for electronic voltage regulators of alternators for tractors and internal combustion engines
JB/T 6709-2006 Specifications of alternators electronic voltage regulater applied for motor vehicles and internal-combustion engine

Professional Standard - Medicine

YY/T 1439.2-2016 Pressure regulators for use with medical gases—Part 2:Manifold and line pressure regulators

Professional Standard - Automobile

QC/T 774-2006 Technical specification for electronic voltage regulator for automotive alternator

Taiwan Provincial Standard of the People's Republic of China

CNS 5022-1984 Thyristorstack for Welding Machine
CNS 11568-1986 Stationary Auto Inductive Voltage Regulator for Shore Use

Professional Standard-Ships

CB/T 4507-2019 Requirement for digital voltage adjuster of marine generator

Professional Standard - Aviation

HBm 66.13-1988 Mini-truck - Technical Specification for Voltage Regulator of Transistor of AC Generator

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43277.2-2023 Clamps and flow regulators for medical infusion and transfusion equipment—Part 2：Graduated flow regulators with fluid contact
GB/T 43277.1-2023 Clamps and flow regulators for medical infusion and transfusion equipment—Part 1：Clamps and flow regulators without fluid contact

Japanese Industrial Standards Committee (JISC)

JIS B 8357:1994 Pressure compensating type flow control valves for oil-hydraulic use
JIS B 8372-3:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators

U.S. Air Force

AIR FORCE MIL-V-5519 D-1975 VALVES, REGULATING FLUID PRESSURE
AIR FORCE MIL-V-5519 D NOTICE 1-1996 VALVES, REGULATING FLUID PRESSURE
AIR FORCE MIL-V-5519 D (2)-1986 VALVES, REGULATING FLUID PRESSURE
AIR FORCE MIL-V-5519 D VALID NOTICE 2-2008 VALVES, REGULATING FLUID PRESSURE

AR-IRAM

IRAM 2104-1950 Transformers for current conduction and shunting and regulating transformers
IRAM OFICIAL 2106-1958 Transformers for current conduction and shunting and regulating transformers

Society of Automotive Engineers (SAE)

SAE J2669-2006 Voltage Regulators for Automotive-Type Generators
SAE J3226-2022 Voltage Regulation and Limits

SCC

IEC 60175:1965 A.C. electric table type fans and regulators
IEC 60174:1966 A.C. electric pedestal type fans and regulators
NS-EN 738-1:1997 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow metering devices
CAN/CSA-Z10524-1-2012(R2017) Pressure regulators for use with medical gases — Part 1: Pressureregulators and pressure regulators with flow-metering devices
DANSK DS/ISO 10524-1/AMD 1:2019 Pressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices
DANSK DS/EN ISO 10524-1:2006 Pressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices
IEC 60385:1972 A.C. electric fans and regulators
DANSK DS/ISO 10524-1:2019 Pressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices
MIL MIL-V-5519D-1975 VALVES, REGULATING FLUID PRESSURE (SUPERSEDING MIL-V-5519C)
10/30205401 DC BS ISO 6953-3. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators. Part 3. Alternative test methods for measuring the flow-rate characteristics of pressure regulators
IEC 60176:1966 A.C. electric ceiling type fans and regulators
CAN/CSA-Z305.3-M87-1987 Pressure regulators, pressure gauges and flow meters for medical gases
NS-EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
AENOR UNE-EN ISO 10524-1:2007 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)
DANSK DS/EN ISO 10524-1/A1:2019 Pressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
NS-EN ISO 10524-1:2019 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
CAN/CSA-Z10524-2002(R2007) Pressure Regulators and Pressure Regulators with Flow-Metering Devices for Medical Gas Systems
MIL MIL-M-38510/148B-2004 MICROCIRCUITS, LINEAR, ADJUSTABLE, PRECISION VOLTAGE REFERENCE, SHUNT TEGULATOR, MONOLITHIC SILICON (SUPERSEDING MIL-M-38510/148A)

Standard Association of Australia （SAA）

AS 3840.1:1998 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices

British Standards Institution (BSI)

BS EN 738-1:1997 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow metering devices
BS EN ISO 10524-1:2019 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN ISO 10524-1:2019+A1:2023 Pressure regulators for use with medical gases. Pressure regulators and pressure regulators with flow-metering devices
BS EN 738-1:1997(2002) Pressure regulators for use with medical gases — Part 1 : Pressure regulators and pressure regulators with flow metering devices
BS EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Pressure regulators and pressure regulators with flow-metering devices
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS ISO 10770-3:2020 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
23/30466259 DC BS EN ISO 10524-1 AMD 1. Pressure regulators for use with medical gases - Part 1. Pressure regulators and pressure regulators with flow-metering devices

Association Francaise de Normalisation

NF S95-159-1:2006 Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices.
NF S95-159:1997 Pressure regulators for use with medical gases. Part 1 : pressure regulators and pressure regulators with flow metering devices.
NF S95-159-1*NF EN ISO 10524-1:2019 Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices
NF ISO 10770-2:2013 Hydraulic transmissions - Electrically modulated hydraulic valves - Part 2: test methods for three-way flow control valves
NF L51-151:1979 Voltage regulators for direct current generators. Overall dimensions and method of fixing of base.
NF ISO 10770-3:2020 Hydraulic transmissions - Electrically modulated hydraulic valves - Part 3: test methods for pressure control valves
NF ISO 10770-1:2009 Hydraulic transmissions - Electrically modulated hydraulic valves - Part 1: test methods for four-way flow control valves

VN-TCVN

TCVN 7741-1-2007 Pressure regulators for use with medical gases.Part 1: Pressure regulators and pressure regulators with flow-metering devices

Defense Logistics Agency

DLA SMD-5962-08225-2008 MICROCIRCUIT, HYBRID, LINEAR, VOLTAGE REGULATOR, 1.5A OUTPUT CURRENT
DLA SMD-5962-96505 REV B-2002 MICROCIRCUIT, LINEAR, LOW DROPOUT VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-07229 REV A-2008 MICROCIRCUIT, LINEAR, HIGH VOLTAGE, ADJUSTABLE, POSITIVE VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA MIL-V-6125 D VALID NOTICE 3-2013 Valve, Regulating, Fluid Pressure, Type C-1
DLA SMD-5962-99619 REV A-2002 MICROCIRCUIT, LINEAR, BUCK CURRENT/VOLTAGE FED PUSH-PULL PULSE WIDTH MODULATOR CONTROLLER, MONOLITHIC SILICON
DLA SMD-5962-90914 REV E-2006 MICROCIRCUIT, LINEAR, VOLTAGE REFERENCE, ADJUSTABLE, MONOLITHIC SILICON
DLA SMD-5962-95838-1995 MICROCIRCUIT, LINEAR, FIXED, LOW DROPOUT, VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA QPL-5519-25-1999 VALVES, REGULATING FLUID PRESSURE, GENERAL SPECIFICATION FOR
DLA SMD-5962-95839 REV B-1996 MICROCIRCUIT, LINEAR, 5 V LOW-DROPOUT VOLTAGE REGULATOR, MONOLITHIC SILICON
DLA SMD-5962-06204 REV A-2008 MICROCIRCUIT, HYBRID, LINEAR, VOLTAGE REGULATOR, 3 A and 5 A OUTPUT CURRENT, LOW DROP OUT
DLA MIL-PRF-1/988 H NOTICE 1-2008 ELECTRON TUBE, VOLTAGE REGULATOR TYPE 7615
DLA MIL-PRF-1/988H-2002 ELECTRON TUBE, VOLTAGE REGULATOR TYPE 7615

United States Navy

NAVY MS28886 REV C VALID NOTICE 1-1987 VALVE, AIRCRAFT, HYDRAULIC, FLOW REGULATOR
NAVY MS28886 REV C-1961 VALVE, AIRCRAFT, HYDRAULIC, FLOW REGULATOR
NAVY MS28886 REV C NOTICE 2-1997 VALVE, AIRCRAFT, HYDRAULIC, FLOW REGULATOR
NAVY MIL-G-18916 (3)-1985 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-G-18916-1955 GOVERNORS, STEAM DRIVEN PUMP PRESSURE REGULATING, NAVAL SHIPBOARD
NAVY MIL-M-19633 B NOTICE 1-1991 MOTOR-GENERATOR, 60 HERTZ, AC TO 400-HERTZ, AC (VOLTAGE AND FREQUENCY REGULATED) SHIPBOARD SERVICE
NAVY MIL-M-19633 B-1967 MOTOR-GENERATOR, 60 HERTZ, AC TO 400-HERTZ, AC (VOLTAGE AND FREQUENCY REGULATED) SHIPBOARD SERVICE
NAVY MIL-R-23098 A (6)-1976 REGULATORS, LINE VOLTAGE, SINGLE PHASE, 400 HERTZ A.C. NAVAL SHIPBOARD
NAVY MIL-R-23098 A-1970 REGULATORS, LINE VOLTAGE, SINGLE PHASE, 400 HERTZ A.C. NAVAL SHIPBOARD
NAVY MIL-M-19633 B (2)-1972 MOTOR-GENERATOR, 60 HERTZ, AC TO 400-HERTZ, AC (VOLTAGE AND FREQUENCY REGULATED) SHIPBOARD SERVICE
NAVY QPL-23098-12-1989 REGULATORS, LINE VOLTAGE, SINGLE PHASE, 400 HERTZ A.C. NAVAL SHIPBOARD
NAVY QPL-23761-QPD-2010 REGULATORS, VOLTAGE, AND CONTROL PANELS AIRCRAFT, DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR
NAVY QPL-23761-2013 REGULATORS, VOLTAGE, AND CONTROL PANELS AIRCRAFT, DIRECT CURRENT GENERATOR, GENERAL SPECIFICATION FOR

International Organization for Standardization (ISO)

ISO 10524-1:2018 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices
ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices
ISO 10524:1995 Pressure regulators and pressure regulators with flow-metering devices for medical gas systems
ISO 10524-1:2018/Amd 1:2023 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices — Amendment 1
ISO 10524-1:2018/PRF Amd 1:2014 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices — Amendment 1
ISO 10524-1:2018/DAmd 1 Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices — Amendment 1

Korean Agency for Technology and Standards (KATS)

KS B 6510-1991 Test Methods for Electro-hydraulic Proportional Series Flow Control Valves
KS B 6511-1991 Test Methods for Electro-Hydraulic Proportional Directional Series Flow Control Valves
KS W 5091-2014(2019) Constant current regulators
KS W 5091-2019 Constant current regulators
KS W 5091-1999 Constant current regulators
KS B 6343-2001 Pressure compensating type flow controlvalves for oil-hydraulic use
KS R 5046-2013 DIMENSIONS OF VOLTAGE REGULATORS FOR AUTOMOBILES

CEN - European Committee for Standardization

EN ISO 10524-1:2006 Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices
EN ISO 10524-1:2019 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with f lowmetering devices

U.S. Military Regulations and Norms

ARMY MIL-R-10265 D (1)-1979 REGULATOR, ENGINE GENERATOR; 28-VOLT DIRECT CURRENT, VIBRATING TYPE
ARMY MIL-R-10265 D-1974 REGULATOR, ENGINE GENERATOR; 28-VOLT DIRECT CURRENT, VIBRATING TYPE
ARMY MIL-PRF-62528 B-2010 REGULATOR, ENGINE GENERATOR: SOLID STATE 28 VOLT, DUAL CURRENT LIMIT, DIRECT CURRENT

GSO

BH GSO ISO 10524-1:2017 Pressure regulators for use with medical gases -- Part 1: Pressure regulators and pressure regulators with flow-metering devices
GSO ISO 10524-1:2015 Pressure regulators for use with medical gases -- Part 1: Pressure regulators and pressure regulators with flow-metering devices
GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
OS GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
GSO IEC TS 63042-101:2023 UHV AC transmission systems - Part 101: Voltage regulation and insulation design
BH GSO IEC TS 63042-101:2023 UHV AC transmission systems - Part 101: Voltage regulation and insulation design

Spanish Association for Standardization (UNE)

UNE-EN 738-1:1997 PRESSURE REGULATORS FOR USE WITH MEDICAL GASES. PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW METERING DEVICES.
UNE 20373:1975 A.C. ELECTRIC FANS AND REGULATORS
UNE-EN ISO 10524-1:2019 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
UNE-EN ISO 10524-1:2007 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)

Danish Standards Foundation

DS/EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices

German Institute for Standardization

DIN EN ISO 10524-1:2019-08 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018); German version EN ISO 10524-1:2019
DIN EN ISO 10524-1/A1:2023-03 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/DAM 1:2023); German and English version EN ISO 10524-1:2018/prA1:2023 / Note: Date of issue ...
DIN EN ISO 10524-1 E:2017-04 Pressure regulators for medical gases Part 1: Pressure regulators and pressure regulators with flow metering devices (draft)
DIN EN ISO 10524-1:2019 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
DIN EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006); English version of DIN EN ISO 10524-1:2006-05
DIN EN ISO 10524-1:2024-01 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018 + Amd 1:2023); German version EN ISO 10524-1:2019 + A1:2023

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C57.12.90-2010 Test code for liquid-immersed distribution, power, and regulating transformers
IEEE C57.12.90-2021 Test Code for Liquid-Immersed Distribution@ Power@ and Regulating Transformers
IEEE Std C57.12.00-2015 General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
IEEE 1860-2014 Guide for Voltage Regulation and Reactive Power Compensation at 1000 kV AC and Above
AIEE Std No. 802 Proposed Test Code for Direct-Current Carbon-Pile Voltage Regulators for Aircraft

International Electrotechnical Commission (IEC)

IEC TS 63042-101:2019 UHV AC transmission systems - Part 101: Voltage regulation and insulation design

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.12.90-2010 Test Code for Liquid-Immersed Distribution@ Power@ and Regulating Transformers

JP-JARI

JRIS R1612-2021 Rolling stock - Three-pressure type control valves

Canadian Standards Association (CSA)

CAN/CSA-Z10524-1-2012 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (First Edition)

FI-SFS

SFS 5512-1989 Air conditioning device. Measurement of air flow and air pressure in air conditioning systems

IEC - International Electrotechnical Commission

TS 63042-101-2019 UHV AC transmission systems - Part 101: Voltage regulation and insulation design (Edition 1.0)

Lithuanian Standards Office

LST EN ISO 10524-1:2006 Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006)

IN-BIS

IS 7396 Pt.1-1985 Hydraulic Design Standards for Regulators Part 1 Simple, Orifices and Differential Regulators

CZ-CSN

CSN ISO 6953-1:1993 Pneumatic fluid power. Air line pressure regulators. Part 1: Main characteristics to be included in commercial literature and specific requirements