bs en1999

bs en1999, Total:447 items.

The international standard classification for "bs en1999" includes: .

The Chinese standard classification for "bs en1999" includes: .

British Standards Institution (BSI)

BS EN 12798:1999 Transport quality system. Road, rail and inland navigation transport. Quality system requirements to supplement BS EN ISO 9002 for the transport of dangerous goods with regard to safety
BS EN 3-6:1996(1999)
BS EN ISO 3171:1999 Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
BS EN ISO 3171:1999(2004)*BS 2000-476:2002 Methods of test for petroleum and its products — BS 2000 - 476 : Petroleum liquids — Automatic pipeline sampling
BS EN 1882:1999 Feather and down - Test methods - Determination of the commercial mass of a lot of feather and down
BS EN 12213:1999 Cryogenic vessels - Methods for performance evaluation of thermal insulation
BS EN 140:1999 Respiratory protective devices - Half masks and quarter masks - Requirements, testing, marking
BS EN 1523:1999 Windows, doors, shutters and blinds - Bullet resistance - Test method
BS EN 60360:1999 Standard method of measurement of lamp cap temperature rise
BS EN 61491:1999 Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
BS EN 1827:1999 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
BS EN 1118:1999 Heat exchangers. Refrigerant cooled liquid coolers. Test methods for establishing the performance
BS EN 704:1999 Agricultural machinery - Pick-up balers - Safety
BS EN 50057:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit
BS EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
BS EN 1036:1999 Glass in building - Mirrors from silver-coated float glass for internal use
BS EN 1593:1999 Non-destructive testing - Leak testing - Bubble emission techniques
BS EN 1937:1999 Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures
BS EN 12569:1999 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
BS EN 12747:1999 Footwear - Test methods for insoles - Abrasion resistance
BS EN 233:1999 Wallcoverings in roll form - Specification for finished wallpapers, wall vinyls and plastics wallcoverings
BS EN 12627:1999 Industrial valves - Butt welding ends for steel valves
BS EN 50262:1999 Cable glands for electrical installations
BS EN 10095:1999 Heat resisting steels and nickel alloys
BS EN 12126:1999 Chemicals used for treatment of water intended for human consumption. Liquefied ammonia
BS EN 61803:1999 Determination of power losses in high-voltage direct current (HVDC) converter stations
BS EN 12472:1999 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS EN 50261:1999 Railway applications - Mounting of electronic equipment
BS EN 267:1999 Forced draught oil burners - Definitions, requirements, testing, marking
BS EN 12744:1999 Footwear - Test methods for insoles - Delamination resistance
BS EN 12760:1999 Valves - Socket welding ends for steel valves
BS EN 61609:1999 Microwave ferrite components. Guide for the drafting of specifications
BS EN 478:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Appearance after exposure at 150 °C - Test method
BS EN 61964:1999 Integrated circuits. Memory devices pin configurations
BS EN 12063:1999 Execution of special geotechnical work - Sheet pile walls
BS EN 12370:1999 Natural stone test methods - Determination of resistance to salt crystallization
BS EN 60599:1999 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
BS EN 50056:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 100% (V/V) methane in air
BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 1059:1999 Timber structures - Product requirements for prefabricated trusses using punched metal plate fasteners
BS EN 132:1999 Respiratory protective devices - Definitions of terms and pictograms
BS EN 1522:1999 Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 12563:1999 Non-active surgical implants - Joint replacement implants - Specific requirements for hip joint replacement implants
BS EN 12439:1999 Sterile rectal catheters for single use
BS EN 12942:1999 Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking
BS EN 166101:1999 Harmonized system of quality assessment for electronic components - Blank detail specification: surface acoustic wave (SAW) filters - Capability approval
BS EN 50143:1999 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV
BS EN 1982:1999 Copper and copper alloys. Ingots and castings
BS EN 1837:1999 Safety of machinery. Integral lighting of machines
BS EN 590:1999 Automotive fuels. Diesel. Requirements and test methods
BS EN 12786:1999 Safety of machinery. Guidance for the drafting of vibration clauses of safety standards
BS EN 1238:1999 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
BS EN 12910:1999 Products used for treatment of water intended for human consumption. Garnet
BS EN 12904:1999 Products used for treatment of water intended for human consumption. Sand and gravel
BS EN 50250:1999 Conversion adaptors for industrial use
BS EN 893:1999 Mountaineering equipment. Crampons. Safety requirements and test methods
BS EN 31:1999 Pedestal wash basins. Connecting dimensions
BS EN 60350:1999 Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 12276:1999 Mountaineering equipment. Frictional anchors. Safety requirements and test methods
BS EN 12121:1999 Chemicals used for treatment of water intended for human consumption. Sodium disulfite
BS EN 12124:1999 Chemicals used for treatment of water intended for human consumption. Sodium sulfite
BS EN 12125:1999 Chemicals used for treatment of water intended for human consumption. Sodium thiosulfate
BS EN 1035:1999 Tannery machines. Moving platen machinery. Safety requirements
BS EN 12190:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar
BS EN 12346:1999 Gymnastic equipment - Wall bars, lattice ladders and climbing frames - Safety requirements and test methods
BS EN 897:1999 Chemicals used for treatment of water intended for human consumption - Sodium carbonate
BS EN 1818:1999 Resilient floor coverings. Determination of the effect of loaded heavy duty castors
BS EN 62020:1999 Electrical accessories. Residual current monitors for household and similar uses (RCMs)
BS EN 732:1999 Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators
BS EN 951:1999 Door leaves - Method for measurement of height, width, thickness and squareness
BS EN 12547:1999 Centrifuges - Common safety requirements
BS EN 1767:1999 Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis
BS EN 740:1999 Anaesthetic workstations and their modules - Particular requirements
BS EN 1111:1999 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
BS EN 1319:1999 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 1841:1999 Adhesives - Test methods for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive
BS EN 12529:1999 Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements
BS EN 13187:1999 Thermal performance of buildings - Qualitative detection of thermal irregularities in building envelopes - Infrared method
BS EN 12022:1999 Blood-gas exchangers
BS EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
BS EN 12631:1999 Fruit and vegetable juices - Enzymatic determination of D- and L-lactic acid (lactate) content - NAD spectrometric method
BS EN 186300:1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables type MSC
BS EN 1286:1999 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
BS EN 12189:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time
BS EN 12483:1999 Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
BS EN 50021:1999 Electrical apparatus for potentially explosive atmospheres - Type of protection “n”
BS EN 50285:1999 Energy efficiency of electric lamps for household use - Measurement methods
BS EN 12636:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion concrete to concrete
BS EN 1651:1999 Paragliding equipment - Harnesses - Safety requirements and strength tests
BS EN 12450:1999 Copper and copper alloys - Seamless, round copper capillary tubes
BS EN 12586:1999 Child care articles - Soother holder - Safety requirements and test methods
BS EN 12751:1999 Textiles - Sampling of fibres, yarns and fabrics for testing
BS EN 12868:1999 Child use and care articles. Methodes for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers
BS EN 948:1999 Hinged or pivoted doors - Determination of the resistance to static torsion
BS EN 1383:1999 Timber structures - Test methods - Pull-through resistance of timber fasteners
BS EN 10254:1999 Steel closed die forgings. General technical delivery conditions
BS EN 12548:1999 Lead and alloys - Lead alloy ingots for electric cable sheathing and for sleeves
BS EN 1567:1999 Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests
BS EN 888:1999 Chemicals used for treatment of water intended for human consumption. Iron(III) chloride
BS EN 908:1999 Agricultural and forestry machinery. Reel machines for irrigation. Safety
BS EN 60707:1999 Information security technology Wireless LAN security protection mechanism
BS EN 33:1999 Pedestal W.C. pans with close-coupled flushing cistern. Connecting dimensions
BS EN 50239:1999 Railway applications. Radio remote control system of traction vehicle for freight traffic
BS EN 12900:1999 Refrigerant compressors. Rating conditions, tolerances and presentation of manufacturer's performance data
BS EN 12588:1999 Lead and lead alloys. Rolled lead sheet for building purposes
BS EN 60908:1999 Audio recording. Compact disc digital audio system
BS EN 12913:1999 Products used for treatment of water intended for human consumption. Powdered diatomaceous earth
BS EN 12909:1999 Products used for treatment of water intended for human consumption. Anthracite
BS EN 1308:1999 Adhesives for tiles. Determination of slip
BS EN 891:1999 Chemicals used for treatment of water intended for human consumption. Iron (III) chloride sulfate
BS EN 10268:1999 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming. General delivery conditions
BS EN 1801:1999 Transportable gas cylinders. Filling conditions for single acetylene cylinders
BS EN 1838:1999 Lighting applications. Emergency lighting
BS EN 1751:1999 Ventilation for buildings. Air terminal devices. Aerodynamic testing of dampers and valves
BS EN 61264:1999 Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
BS EN 12123:1999 Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
BS EN 12183:1999 Manually propelled wheelchairs. Requirements and test methods
BS EN 12193:1999 Light and lighting. Sports lighting
BS EN 12703:1999 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
BS EN 60059:1999 IEC standard current ratings
BS EN 50201:1999 Interfaces for DVB-IRD
BS EN 1722:1999 Light conveyor belts. Test method for the determination of the maximum tensile strength
BS EN 952:1999 Door leaves - General and local flatness - Measurement method
BS EN 1380:1999 Timber structures - Test methods - Load bearing nailed joints
BS EN 12182:1999 Technical aids for disabled persons - General requirements and test methods
BS EN 207:1999 Personal eye-protection - Filters and eye-protectors against laser radiation (laser eye-protectors)
BS EN 1164:1999 Feather and down - Test methods - Determination of the turbidity of an aqueous extract
BS EN 1508:1999 Water supply - Requirements for systems and components for the storage of water
BS EN 1884:1999 Feather and down - Test methods - Determination of microbiological state
BS EN 12377:1999 Packaging. Flexible tubes. Test method for the airtightness of closures
BS EN 12526:1999 Castors and wheels - Vocabulary, recommended symbols and multilingual dictionary
BS EN 12531:1999 Castors and wheels - Hospital bed castors
BS EN 1216:1999 Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance
BS EN 1719:1999 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure-sensitive adhesives - Determination of loop tack
BS EN 10087:1999 Free cutting steels - Technical delivery conditions for semi-finished products, hot rolled bars and rods
BS EN 60442:1999 Electric toasters for household and similar purposes. Methods for measuring the performance
BS EN 1348:1999 Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives
BS EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
BS EN 1853:1999 Agricultural machinery - Trailers with tipping body - Safety
BS EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
BS EN 12409:1999 Rubber and plastics machines - Thermoforming machines - Safety requirements
BS EN 12452:1999 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
BS EN 12738:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for containment of animals inoculated with microorganisms in experiments
BS EN 12827:1999 Inland navigation vessels - Connections for the transfer of diesel oil
BS EN 12901:1999 Products used for treatment of water intended for human consumption - Inorganic supporting and filtering materials - Definitions
BS EN 50295:1999 Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator sensor interface (AS-i)
BS EN 1807:1999 Safety of woodworking machines - Band sawing machines
BS EN 1457:1999 Chimneys - Clay/ceramic flue liners - Requirements and test methods
BS EN 12632:1999 Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method
BS EN 12420:1999 Copper and copper alloys - Forgings
BS EN 12857:1999 Foodstuffs - Determination of cyclamate - High performance liquid chromatographic method
BS EN 50180:1999 Bushings above 1 kV up to 36 kV and from 250 A to 3,15 kA for liquid filled transformers
BS EN 1302:1999 Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
BS EN 12248:1999 Sawn timber used in industrial packaging - Permitted deviations and preferential sizes
BS EN 12287:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Description of reference materials
BS EN 1359:1999 Gas meters - Diaphragm gas meters
BS EN 12458:1999 Surface active agents - Determination of stability in hard water
BS EN 12884:1999 Biotechnology - Performance criteria for centrifuges
BS EN 50284:1999 Special requirements for construction , test and marking of electrical apparatus of equipment group II , Category 1 G
BS EN 12598:1999 Oxygen Monitors for Patient Breathing Mixtures - Particular Requirements Ratified European Text
BS EN 1637:1999 Light conveyor belts - Test methods for the measurement of the electrical resistances
BS EN 1459:1999 Safety of industrial trucks - Self-propelled variable reach trucks
BS EN 1979:1999 Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
BS EN 12673:1999 Water quality. Gas chromatographic determination of some selected chlorophenols in water
BS EN 13292:1999 Space engineering standards - Policy and principles
BS EN 50227:1999 Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
BS EN 1933:1999 Exterior blinds - Resistance to load due to water accumulation - Test method
BS EN 12262:1999 Rotodynamic pumps - Technical documents - Terms, delivery range, layout
BS EN 12218:1999 Rail systems for supporting medical equipment
BS EN 61770:1999 Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
BS EN 1776:1999 Gas supply - Natural gas measuring stations - Functional requirements
BS EN 1542:1999 Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
BS EN 1925:1999 Natural stone test methods - Determination of water absorption coefficient by capillarity
BS EN 10274:1999 Metallic materials - Drop weight tear test
BS EN 12184:1999 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
BS EN 12630:1999 Fruit and vegetable juices - Determination of glucose, fructose, sorbitol and sucrose contents - Method using high-performance liquid chromatography
BS EN 60947:1999 Low voltage switchgear and controlgear - Switches, disconnectors, switch-disconnectors and fuse-combination units
BS EN 12584:1999 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology
BS EN 12455:1999 Resilient floor coverings. Specification for corkment underlay
BS EN 328:1999 Heat exchangers - Test procedures for establishing the performance of forced convection unit air coolers for refrigeration
BS EN 12832:1999 Characterisation of sludges - Utilisation and disposal of sludges - Vocabulary
BS EN 32:1999 Wall-mounted wash basin connection dimensions
BS EN 41003:1999 Particular safety requirements for equipment to be connected to telecommunications networks
BS EN 721:1999 Leisure accommodation vehicles. Safety ventilation requirements
BS EN 50319:1999 Proximity devices - Requirements for proximity devices with analogue output
BS EN 12564:1999 Non-Active Surgical Implants - Joint Replacement Implants - Specific Requirements for Knee Joint Replacement Implants Ratified European Text
BS EN 1866:1999 Mobile fire extinguishers
BS EN 1243:1999 Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates
BS EN 12122:1999 Chemicals used for treatment of water intended for human consumption. Ammonia solution
BS EN 12079:1999 Offshore containers. Design, construction, testing, inspection and marking
BS EN 12619:1999 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method
BS EN 12572:1999 Artificial climbing structures. Protection points, stability requirements and test methods
BS EN 1554:1999 Conveyor belts. Drum friction testing
BS EN 12903:1999 Products used for treatment of water intended for human consumption. Powdered activated carbon
BS EN 1493:1999 Vehicle lifts
BS EN 13220:1999 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
BS EN 13401:1999 Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for Enumeration of Clostridium Perfringens - Colony - Count Technique ISO 7937:1997 Modified
BS EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values
BS EN 1293:1999 General requirements for components used in pneumatically pressurized discharge pipes , drains and sewers
BS EN 50058:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% (V/V) gas
BS EN 12743:1999 Footwear. Test methods for outsoles. Compression energy
BS EN 12749:1999 Footwear - Ageing conditioning
BS EN 50126:1999 Railway applications - The specification and demonstration of reliability, availability, maintainability and safety (RAMS)
BS EN 61373:1999 Railway applications. Rolling stock equipment. Shock and vibration tests
BS EN 36:1999 Wall-hung bidets with over-rim supply - Connecting dimensions
BS EN 12263:1999 Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
BS EN 12941:1999 Respiratory protective devices - Powered filtering devices incorporating a helmet or a hood - Requirements, testing, marking
BS EN 12742:1999 Fruit and vegetable juices - Determination of free amino acids content - Liquid chromatographic method
BS EN 60522:1999 Determination of the permanent filtration of X-ray tube assemblies
BS EN 1626:1999 Cryogenic vessels - Valves for cryogenic service
BS EN 10275:1999 Metallic materials - Tube ring hydraulic pressure test
BS EN 12322:1999 In vitro diagnostic medical devices. Culture media for microbiology. Performance criteria for culture media
BS EN 60456:1999 Clothes washing machines for household use - Methods for measuring the performance
BS EN 60646:1999 Test methods for crucible induction furnaces
BS EN 889:1999 Chemicals used for treatment of water intended for human consumption. Iron(II) sulfate
BS EN 12413:1999 Safety requirements for bonded abrasive products
BS EN 12490:1999 Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
BS EN 1265:1999 Noise test code for foundry machines and equipment
BS EN 12905:1999 Products used for treatment of water intended for human consumption. Expanded aluminosilicate
BS EN 1323:1999 Adhesives for tiles. Concrete slab for test
BS EN 12571:1999 Materials and articles in contact with foodstuffs - Transport units for catering containers containing prepared foodstuffs - Thermal and hygienic requirements and testing
BS EN 135:1999 Respiratory protective devices - List of equivalent terms
BS EN 12021:1999 Respiratory protective devices - Compressed air for breathing apparatus
BS EN 1150:1999 Protective clothing - Visibility clothing for non-professional use - Test methods and requirements
BS EN 60749:1999 Semiconductor devices - Mechanical and climatic test methods
BS EN 61868:1999 Mineral insulating oils. Determination of kinematic viscosity at very low temperatures
BS EN 12885:1999 Biotechnology - Performance criteria for cell disrupters
BS EN 1761:1999 Rubber hoses and hose assemblies for fuel truck delivery - Specification
BS EN 461:1999 Specification for dedicated liquefied petroluem gas appliances - Flueless non-domestic space heaters not exceeding 10 kW
BS EN 877:1999 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from building - Requirements, test methods and quality assurance
BS EN 1902:1999 Adhesives - Test methods for adhesives for floor coverings and wall coverings - Shear test
BS EN 12745:1999 Footwear - Test methods for insoles - Pin holding strength
BS EN 12918:1999 Water quality. Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
BS EN 60705:1999 Household microwave ovens - Methods for measuring performance
BS EN 1808:1999 Safety requirements on suspended access equipment - Design calculations, stability criteria, construction - Tests
BS EN 12103:1999 Resilient floor coverings. Agglomerated cork underlays. Specification
BS EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
BS EN 12615:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of slant shear strength
BS EN 62019:1999 Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
BS EN 50104:1999 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 12919:1999 Workplace Atmoshperes - Pumps for the Sampling of Chemical Agents with a Volume Flow Rate of over 5 l/min - Requirements and Test Methods
BS EN 12911:1999 Products used for treatment of water intended for human consumption. Manganese greensand
BS EN 12878:1999 Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test
BS EN 12902:1999 Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Methods of test
BS EN 1971:1999 Copper and copper alloys. Eddy current test for tubes
BS EN 50254:1999 High efficiency communication subsystem for small data packages
BS EN 12173:1999 Chemicals used for treatment of water intended for human consumption. Sodium fluoride
BS EN 12120:1999 Chemicals used for treatment of water intended for human consumption. Sodium hydrogen sulfite
BS EN 896:1999 Chemicals used for treatment of water intended for human consumption. Sodium hydroxide
BS EN 890:1999 Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate
BS EN 999:1999 Safety of machinery. The positioning of protective equipment in respect of approach speeds of parts of the human body
BS EN 12534:1999 Welding Consumables - Wire Electrodes@ Wires@ Rods and Deposits for Gas Shielded Metal Arc Welding of High Strength Steels - Classification
BS EN 12748:1999 Footwear - Test Methods for Outsoles, Insoles, Lining and Insocks - Water Soluble Content
BS EN 1015:1999 Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
BS EN 1746:1999 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
BS EN 10283:1999 Corrosion resistant steel castings
BS EN 479:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of heat reversion
BS EN 949:1999 Windows and curtain walling, doors, blinds and shutters - Determination of the resistance to soft and heavy body impact for doors
BS EN 1845:1999 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
BS EN 1721:1999 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack
BS EN 12528:1999 Castors and wheels - Castors for furniture - Requirements
BS EN 12533:1999 Castors and wheels - Castors and wheels for applications over 1, 1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
BS EN 1799:1999 Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface
BS EN 61846:1999 Ultrasonics. Pressure pulse lithotripters. Characteristics of fields
BS EN 1324:1999 Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
BS EN 316:1999 Wood fibreboards - Definition, classification and symbols
BS EN 707:1999 Agricultural machinery - Slurry tankers - Safety
BS EN 1065:1999 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests
BS EN 1625:1999 Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the ignitability of vertically oriented specimens
BS EN 12449:1999 Copper and copper alloys - Seamless, round tubes for general purposes
BS EN 12562:1999 Textiles - Para-aramid multifilament yarns - Test methods
BS EN 12741:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for biotechnology laboratory operations
BS EN 12861:1999 Copper and copper alloys - Scrap
BS EN 170000:1999 Harmonized system of quality assessment for electronic components - Generic specification: waveguide type dielectric resonators
BS EN 1169:1999 Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
BS EN 50209:1999 Test of insulation of bars and coils of high-voltage machines
BS EN 12061:1999 Plastics piping systems. Thermoplastics fittings. Test method for impact resistance
BS EN 50181:1999 Plug-in type bushings above 1 kV up to 36 kV and from 250 A to 1.25 kA for equipment other than liquid filled transformers
BS EN 60618:1999 Inductive voltage dividers
BS EN 1044:1999 Brazing - Filler metals
BS EN 12188:1999 Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterization of structural bonding agents
BS EN 12423:1999 Polypropylene twines
BS EN 12157:1999 Rotodynamic pumps - Coolant pump units for machine tools - Nominal flow rate, dimensions
BS EN 12410:1999 Swap bodies - Thermal swap bodies of class A. Dimensions and general requirements
BS EN 1382:1999 Timber structures - Test methods - Withdrawal capacity of timber fasteners
BS EN 12351:1999 Industrial valves - Protective caps for valves with flanged connections
BS EN 12830:1999 Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability
BS EN 61943:1999 Integrated circuits. Manufacturing line approval application guideline
BS EN 12523:1999 External limb prostheses and external orthoses - Requirements and test methods
BS EN 60477:1999 Laboratory d.c. resistors
BS EN 133200:1999 Harmonized system of quality assessment for electronic components Sectional specification : Passive filter units for electromagnetic interference suppression (filters for which safety tests are required)
BS EN 12386:1999 Chemicals used for treatment of water intended for human consumption. Copper sulfate
BS EN 1245:1999 Adhesives. Determination of pH. Test method
BS EN 1347:1999 Adhesives for tiles. Determination of wetting capability
BS EN 1346:1999 Adhesives for tiles. Determination of open time
BS EN 60193:1999 Hydraulic turbines, storage pumps and pump-turbines — Model acceptance tests
BS EN 589:1999 Automotive fuels. LPG. Requirements and test methods
BS EN 50298:1999 Empty enclosures for low - voltage switchgear and controlgear assemblies - General requirements
BS EN 61209:1999 Maritime navigation and radiocommunication equipment and systems. Integrated bridge systems (IBS). Operational and performance requirements, methods of testing and required test results
BS EN 1443:1999 Chimneys. General requirements
BS EN 334:1999 Gas pressure regulators for inlet pressures up to 100 bar
BS EN 1890:1999 Surface active agents. Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
BS EN 1811:1999 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1938:1999 Personal eye protection. Goggles for motorcycle and moped users
BS EN 1936:1999 Natural stone test methods. Determination of real density and apparent density and of total and open porosity
BS EN 909:1999 Agricultural and forestry machinery. Centre pivot and moving lateral types irrigation machines. Safety
BS EN 61121:1999 Tumble dryers for household use. Methods for measuring the performance
BS EN 60398:1999 Industrial electroheating installations - General test methods
BS EN 1624:1999 Textiles and textile products - Burning behaviour of industrial and technical textiles - Procedure to determine the flame spread of vertically oriented specimens
BS EN 10269:1999 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 12414:1999 Vehicle parking control equipment - Pay and display ticket machine - Technical and functional requirements
BS EN 12549:1999 Acoustics - Noise test code for fastener driving tools - Engineering method
BS EN 12740:1999 Biotechnology - Laboratories for research, development and analysis - Guidance for handling, inactivating and testing of waste
BS EN 12858:1999 Paper - Printing and business paper - Requirements for continuous stationery
BS EN 1151:1999 Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking
BS EN 12109:1999 Vacuum drainage systems inside buildings
BS EN 12422:1999 Sisal twines
BS EN 12956:1999 Wallcoverings in roll form - Determination of dimensions, straightness, spongeability and washability
BS EN 50215:1999 Railway applications - Testing of rolling stock after completion of construction and before entry into service
BS EN 12249:1999 Sawn timber used in pallets - Permitted deviations and guidelines for dimensions
BS EN 12406:1999 Swap bodies - Thermal swap bodies of class C. Dimensions and general requirements
BS EN 12634:1999 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
BS EN 186310:1999 Harmonized system of quality assessment for electronic components - Sectional specification: connector sets for optical fibres and cables - Type MF
BS EN 477:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to impact of main profiles by falling mass
BS EN 947:1999 Hinged or pivoted doors - Determination of the resistance to vertical load
BS EN 1397:1999 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
BS EN 12068:1999 Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
BS EN 1048:1999 Heat exchangers - Air-cooled liquid coolers "dry coolers" - Test methods for establishing the performance
BS EN 1117:1999 Heat exchangers. Liquid-cooled refrigerant condensers. Test methods for establishing the performance
BS EN 1720:1999 Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability
BS EN 10130:1999 Cold-rolled low-carbon steel flat products for cold forming - Technical delivery conditions
BS EN 12300:1999 Cryogenic vessels - Cleanliness for cryogenic service
BS EN 60238:1999 Edison screw lampholders
BS EN 208:1999 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
BS EN 1985:1999 Walking aids - General requirements and test methods
BS EN 12527:1999 Castors and wheels - Test methods and apparatus
BS EN 12532:1999 Castors and wheels - Castors and wheels for applications up to 1,1 m/s (4 km/h)
BS EN 536:1999 Road construction machines - Asphalt mixing plants - Safety requirements
BS EN 1267:1999 Valves - Test of flow resistance using water as a test fluid
BS EN 1381:1999 Timber structures - Test methods - Load bearing stapled joints
BS EN 37:1999 C . pans with independent water supply - Connecting dimensions
BS EN 46003:1999 Quality systems for the manufacture of medical devices
BS EN 50055:1999 Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I apparatus indicating up to 5 % (V/V) methane in air
BS EN 1724:1999 Light conveyor belts - Test method for the determination of the coefficient of friction
BS EN 1718:1999 Light conveyor belts - Test method for the measurement of the electrostatic field generated by a running light conveyor belt
BS EN 12345:1999 Welding - Multilingual Terms for Welded Joints with Illustrations
BS EN 1322:1999 Tile adhesives Ð Definitions and terms (including amendment A1:1998)
BS EN 1903:1999 Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS EN 1800:1999 Transportable gas cylinders. Acetylene cylinders. Basic requirements and definitions
BS EN 997:1999 WC pans with integral trap
BS EN 12254:1999 Screens for laser working places. Safety requirements and testing
BS EN 12906:1999 Products used for treatment of water intended for human consumption. Pumice
BS EN 12907:1999 Products used for treatment of water intended for human consumption. Pyrolised coal material
BS EN 12914:1999 Products used for treatment of water intended for human consumption. Powdered perlite
BS EN 12912:1999 Products used for treatment of water intended for human consumption. Barite
BS EN 12915:1999 Products used for treatment of water intended for human consumption. Granular activated carbon
BS EN 299:1999 Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
BS EN 12376:1999 In Vitro Diagnostic Medical Devices - Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Staining in Biology
BS EN 12419:1999 Respiratory Protective Devices - Light Duty Construction Compressed Air Line Breathing Apparatus Incorporating a Full Face Mask, Half Mask or Quarter Mask - Requirements, Testing, Marking
BS EN 12844:1999 Zinc and zinc alloys. Castings. Specifications
BS EN 1779:1999 Non-destructive testing - Leak testing - Criteria for method and technique selection
BS EN 12402:1999 Lead and lead alloys - Methods of sampling for analysis
BS EN 12451:1999 Copper and copper alloys. Seamless, round tubes for heat exchangers
BS EN 12628:1999 Diving accessories - Combined buoyancy and rescue devices - Functional and safety requirements, test methods
BS EN 12955:1999 Foodstuffs - Determination of aflatoxin B1, and the sum of aflatoxins B1, B2, G1 and G2 in cereals, shell-fruits and derived products - High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up
BS EN 1569:1999 Surfaces for sports areas - Determination of the behaviour under a rolling load
BS EN 1905:1999 Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content
BS EN 60630:1999 Maximum lamp outlines for incandescent lamps
BS EN 12372:1999 Natural stone test methods - Determination of flexural strength under concentrated load
BS EN 12585:1999 Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability
BS EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
BS EN 1287:1999 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
BS EN 12246:1999 Quality classification of timber used in pallets and packaging
BS EN 12856:1999 Foodstuffs - Determination of acesulfame-K, aspartame and saccharin - High performance liquid chromatographic method
BS EN 50270:1999 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 745:1999 Agricultural machinery - Rotary mowers and flail-mowers - Safety
BS EN 950:1999 Door leaves - Determination of the resistance to hard body impact
BS EN 10278:1999 Dimensions and tolerances of bright steel products
BS EN 12659:1999 Lead and lead alloys - Lead
BS EN 1570:1999 Safety requirements for lifting tables
BS EN 1647:1999 Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety
BS EN 1953:1999 Atomizing and spraying equipment for coating materials - Safety requirements
BS EN 12645:1999 Pressure gauges - Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles - Metrology, requirements and testing
BS EN 60433:1999 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators with a.c. systems - Characteristics of insulator units of the long rod type
BS EN 61897:1999 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
BS EN 12286:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
BS EN 12690:1999 Biotechnology - Performance criteria for shaft seals
BS EN 307:1999 Heat exchangers - Guidelines for preparing installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger
BS EN 1148:1999 Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data
BS EN 1883:1999 Feather and down - Sampling in view of tests
BS EN 12341:1999 Air quality - Determination of the PM10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
BS EN 12530:1999 Castors and wheels - Castors and wheels for manually propelled institutional applications
BS EN 483:1999 Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW
BS EN 644:1999 Designation and expression of tolerances of main and supplementary series of uncut paper sizes and manufacturing directions
BS EN 111:1999 Wall-hung hand rinse basins. Connecting dimensions
BS EN 50242:1999 Electric dishwashers for household use. Test methods for measuring the performance
BS EN 1278:1999 Chemicals used for treatment of water intended for human consumption. Ozone
BS EN 13089:1999 Mountaineering equipment. Ice tools. Safety requirements and test methods
BS EN 60633:1999 Terminology for high-voltage direct current (HVDC) transmission
BS EN 61174:1999 Maritime navigation and radiocommunication equipment and systems. Electronic chart display and information system (ECDIS). Operational and performance requirements, methods of testing and required test results
BS EN 1926:1999 Natural stone test methods. Determination of compressive strength
BS EN 228:1999 Automotive fuels. Unleaded petrol. Requirements and test methods
BS EN 773:1999 General requirements for components used in hydraulically pressurized discharge pipes, drains and sewers
BS EN 937:1999 Chemicals used for treatment of water intended for human consumption. Chlorine
BS EN 60564:1993(1999) D.C. bridges for measuring resistance
BS EN 2100:1992(1999) Aluminium alloy AL - P2014A - T4511 — Extruded bars and sections a or D ≤ 200 mm
BS EN 1232:1997(1999) Workplace atmospheres — Pumps for personal sampling of chemical agents — Requirements and test methods
BS EN 2309:1990(1999) Specification for Hole sizes for solid rivets
BS EN 2145:1994(1999) Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
BS EN 2259:1995(1999) Silicone rubber (VMQ) — Hardness 50 IRHD
BS EN ISO 1172:1999 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods
BS EN ISO 9773:1999 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
BS EN ISO 14632:1999 Extruded sheets of polyethylene (PE-HD) - Requirements and test methods
BS EN ISO 14597:1999 Petroleum products. Determination of vanadium and nickel content. Wavelength-dispersive X-ray fluorescence spectrometry
BS EN ISO 305:1999 Plastics - Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method
BS EN ISO 13702:1999 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
BS EN 610:1996(1999) Tin and tin alloys — Ingot tin
BS EN 2093:1992(1999) Aluminium alloy AL - P7009 - T74 — Hand forgings 20 mm ≤ a ≤ 150 mm
BS EN 2143:1993(1999) Rivets, solid, universal head, in aluminium 1050A, inch based series
BS EN 1131:1995(1999) Method for Determination of the relative density of fruit and vegetable juices
BS EN 1377:1997(1999) Foodstuffs — Determination of acesulfame K in table top sweetener preparations — Spectrometric method
BS EN 434:1994(1999) Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
BS EN 1261:1995(1999) Fibre ropes for general service — Hemp
BS EN 10126:1996(1999) Cold Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
BS EN ISO 9408:1999 Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
BS EN ISO 14402:1999 Water quality. Determination of phenol index by flow analysis (FIA and CFA)
BS EN ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
BS EN 61063:1996(1999) Acoustics — Measurement of airborne noise emitted by steam turbines and driven machinery
BS EN 2020:1989(1999) Specification for Bearings - airframe rolling single row self aligningroller bearings in corrosion resisting steel diameter series 3 and 4 — Dimensions and loads
BS EN 380:1993(1999) Timber structures — Test methods — General principles for static load testing
BS EN 143000:1992(1999) Harmonized system of quality assessment for electronic components : Generic specification : Directly heated negative temperature coefficient thermistors
BS EN 123700:1997(1999) Harmonized system of quality assessment for electronic components Sectional specification : Flex - rigid double sided printed boards with through connections
BS EN 10052:1994(1999) Vocabulary of heat treatment terms for ferrous products
BS EN ISO 12737:1999 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 15013:1999 Extruded sheets of polypropylene (PP). Requirements and test methods
BS EN 1593:1999(2008) Non - destructive testing — Leak testing — Bubble emission techniques
BS EN 1567:1999(2009) Requirements and tests for water pressure reducing valves and combined water pressure reducing valves for building valves
BS EN 50073:1999(2001) Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
BS EN ISO 9163:1999 Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings
BS EN ISO 8729:1999 Ships and marine technology. Marine radar reflectors
BS EN ISO 659:1999 Oilseeds. Determination of oil content (Reference method)
BS EN 1117:1999(2003) Heat exchangers — Liquid - cooled refrigerant condensers — Test methods for establishing the performance
BS EN 12918:1999(2008)*BS 6068-2.67:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis
BS EN 12673:1999(2008)*BS 6068-2.65:1999 Water quality - Gas chromatographic determination of some selected chlorophenols in water