super battery

super battery, Total:176 items.

The international standard classification for "super battery" includes: Other non-ferrous metals and their alloys , Acid secondary cells and batteries , Conducting materials .

The Chinese standard classification for "super battery" includes: Rare metals and their alloys , Electrical energy storage device , Graphite material , Electrochemical power source .

Taiwan Provincial Standard of the People's Republic of China

CNS 419-1982 Air Depolarized Primary Cells

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24533-2019(英文版) Graphite negative electrode materials for lithium ion battery
GB/T 24533-2009 Graphite negative electrode materials for lithium ion battery
GB/T 31963-2015 RE-Mg-Ni-base superlattice hydrogen storage powder used in negative electrodes of nickel-metal hydride batteries
GB/T 26412-2010(英文版) Rare earthbase AB5 hydrogen storage powder used in negative electrodes of nickelmetal hydride batteries
GB/T 23636-2009 Plate for lead-acid battery

Group Standards of the People's Republic of China

T/SXS 023-2023 Soft pack lithium battery pole ear welding machine
T/HBZXL 011-2023 Technical specification for roller press of battery electrode
T/QGCML 306-2022 Cathode material for sodium ion battery
T/DZJN 279-2024 Technical requirements for membrane electrode for proton exchange membrane fuel cells
T/CPCIF 0251-2023 Pitch for lithium ion battery cathode materials
T/CSTM 00461-2022 Test method for electrode peel strength of crystalline silicon PV cells
T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
T/GDMES 0035-2022 Lithium battery tab laser cutting machine
T/SXS 019-2023 Fuel cell bipolar plate technology
T/ZZB 2408-2021 Sodium hydroxide as cathode material for lithium batteries
T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
T/GERS 0033-2023 Technical specifications on extreme fast charging lithium-ion traction secondary cells
T/ZZB 2721-2022 Lithium-ion battery pneumatic ULV sprayer
T/ZZB 1302-2019 Water-based binders on cathode / anode in lithium-ion batteries
T/SSEA 0202-2022 Lithium battery pole piece rolling mill roll
T/SSEA 0201-2022 Roll blanks for lithium battery pole piece rolling mill rolls
T/CASME 901-2023 Lithium battery pole piece punching and cutting mold technical requirements
T/CSTA 0009-2022 Ultra-thin and ultra-thin strips of grain-oriented electrical steel
T/CASME 393-2023 Anti-warping ear tape for lithium battery
T/GDLIA 6-2021 Inland river double electric (lithium ion battery, super capacitor) pure electric ship power system
T/FSYY 0048-2021 Waste lithium battery pretreatment products — Cathode material powder
T/GDMIA 012-2024 Rotary furnace for the preparation of electrode materials for lithium-ion batteries
T/CI 051-2023 General technical specifications for lithium-ion batteries with aluminum-based anode
T/SHDSGY 134-2023 Technical specification for graphene super battery energy storage system
T/ZSA 161-2023 Proton exchange membrane fuel cell metallic plate
T/SSEA 0175-2022 Ultra-thin and ultra-thin strips of grain-oriented electrical steel
T/CSTM 00966-2024 Ultra-low temperature resistant RE-nickel-hydrogen battery for microgrid
T/QGCML 411-2022 Lithium battery anode material intelligent production line
T/ZHFCA 1001-2023 Metal unipolar plates for proton exchange membrane fuel cells
T/CIAPS 0029-2023 Lithium Manganese Iron Phosphate Cathode Materials for Lithium Ion Battery
T/NAIA 0172-2022 Lithium-ion battery silicon carbon anode material
T/CI 365-2024 Silver powder for solar cell front side finger electrode
T/CSTM 00970-2024 RE-Y-Ni-based superlattice hydrogen storage alloy powder used in negative electrode of nickel-metal hydride batteries
T/QGCML 308-2022 Sodium ion battery anode material
T/DCB 003-2023 Lithium-ion battery cathode material lithium iron manganese phosphate
T/SXJP 048-2023 600mm diameter ultra-high power graphite electrode
T/CAS 455-2020 Automatic pole blade scraping machine for Lithium-ion battery
T/QGCML 1765-2023 Asphalt for lithium-ion battery negative electrode materials
T/JSQA 189-2024 Discharge valve for new energy lithium battery slurry
T/HNNMIA 21-2023 Cold rolled strip for lithium battery positive electrode aluminum foil
T/HEBQIA 197-2023 Technical specifications for graphitization of graphite anode materials for lithium batteries
T/CPCIF 0169-2021 Recycling products from lithium-ion battery wastes— Selected electrode material powder
T/ZGTS 008-2024 Graphite sagger for anode and cathode materials of lithium ion battery
T/QGCML 3252-2024 Lead-acid battery pole group casting and welding neutral flux
T/IFP 005-2023 Spherical graphite used as cathode of lithiumion secondary battery

Hebei Provincial Standard of the People's Republic of China

DB13/T 1513-2012 Battery pole piece rolling equipment
DB13/T 2556-2017 General technical requirements for battery plate complete equipment

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 23636-2017 Plate for lead-acid battery

Professional Standard - Machinery

JB/T 10679-2006 Lead-acid battery plate
JB/T 7630.1-2008 Glass micro-fiber for lead-acid batteries
JB/T 7630.1-1998 Microglass fiber separator for lead acid storage batteries

Professional Standard - Ferrous Metallurgy

YB/T 4090-2015 Ultra high power graphite electrode
YB/T 4090-2000 Ultra high power graphite electrode

工业和信息化部

YS/T 1515-2021 Aluminum alloy electrode materials for aluminum-air fuel cells
JB/T 14230-2022 Coating machine for li-ion battery
HG/T 5055-2016 Adhesive tapes for electrode protect in lithium battery
SJ/T 11792-2022 Test method for conductivity of electrode materials used in lithium ion battery
SJ/T 11793-2022 Test method for electrochemical properties of electrode materials used in lithium ion battery

Military Standard of the People's Republic of China-General Armament Department

GJB 2670-1996 Extreme general requirements for battery packs

Professional Standard - Light Industry

QB/T 2459.2-1999 LR6 and LR03 Alkaline Zinc-manganese Batteries - Current Collector
QB/T 1971.1-1994 Anode Cap of Dry Battery General Cooper Caps
QB/T 2459.1-1999 LR6/LR03 Alkaline Manganese-Zinc Cells Anode Steel Shell

中国轻工总会

QB 1971.1-1994 Dry battery positive cap ordinary copper cap

国家能源局

NB/T 42146-2018 Zinc bromine flow battery. Test methods of electrode、membrane and electrolyte
NB/T 42082-2016 Vanadium flow battery-test method for electrode

Professional Standard - Energy

NB/T 42007-2013 Bipolar Plate for Vanadium Flow Battery-test Method
NB/T 11224-2023 Test method for Zinc-nickle flow battery Electrode

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 24533-2019 Graphite negative electrode materials for lighium ion battery

未注明发布机构

DIN IEC/TS 62607-4-1:2014*DIN SPEC 42607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
DIN 40736-1 E:2012-10 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
DIN IEC/TS 62607-4-1:2018*DIN SPEC 42607-4-1:2018 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 690-2012 Hydrogen Storage Alloy Powder for Nickel Metal Hydride Battery Anode Material

CZ-CSN

CSN 36 4175-1965 Alkaline mercury cells and batteries
CSN 36 4111-1968 Cell terminals and battery terminals

IN-BIS

IS 6648-1972 Specification for carbon electrodes for dry cells and batteries

SE-SIS

SIS SS IEC 254-2:1987 Lead-acid traction battenes - Dimensions of cells and terminals and marking of polarity on cells

British Standards Institution (BSI)

PD 6536-1992 Extra-low voltage (ELV). Limit values
BS 6290-3:1999 Lead-acid stationary cells and batteries - Specification for the flat positive plate type
PD 6536:1992 Extra-low voltage (ELV). Limit values
BS 6290-2:1999 Lead-acid stationary cells and batteries - Specification for the high-performance Plante positive type
BS EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
BS EN 60254-2:1997 Lead-acid traction batteries - Dimensions of cells and terminals and marking of polarity on cells

RO-ASRO

STAS 11530-1991 Electrodes for batteries shape and dimensions

(U.S.) Ford Automotive Standards

FORD ESF-M1L60-A-2003 COPPER WIRE, BATTERY CABLE, SUPER FLEXIBLE - #00 GAGE ***TO BE USED WITH FORD WSS-M99P1111-A***

International Electrotechnical Commission (IEC)

IEC TR3 61201:1992 Extra-low voltage (ELV); limit values
IEC 60254-2:1985 Lead-acid traction batteries. Part 2 : Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2:2000 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2:1997 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2/AMD1:2000 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells; Amendment 1
IEC TS 62607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
IEC 113/173/DTS:2012 IEC/TS 62607-4-1: Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method

SCC

BS PD 6536:1992 Extra-low voltage (ELV). Limit values
BS 6290-3:1986 Lead-acid stationary cells and batteries-Specification for lead-acid pasted positive plate type
BS 6290-2:1984 Lead-acid stationary cells and batteries-Specification for lead-acid high performance Planté positive type
IEC 60254-2:1997+AMD1:2000 CSV Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
DANSK DS/EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
UNE-EN 60254-2:1997 LEAD-ACID TRACTION BATTERIES. PART 2: DIMENSIONS OF CELLS AND TERMINALS, AND MARKING OF POLARITY ON CELLS.
AENOR UNE-EN 60254-2:2008 Lead-acid traction batteries- Part 2: Dimensions of cells and terminals and marking of polarity on cells
CEI EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
IEC 60254-2:1984 Lead-acid traction batteries. Part 2: Dimensions of cells and terminals and marking of polarity on cells.
DIN 40742:2015 Lead acid batteries - Stationary valve regulated cells with positive tubular plates and immobilized electrolyte (gel)
AS 2191:1978 Stationary batteries of the lead-acid Plante positive plate type
IEC 60254-2:1997/AMD1:2000 Amendment 1 - Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
MIL MIL-DTL-23919D-2020 Reference Cell, Impressed Current Cathodic Protection (ICCP)-Silver-Silver Chloride
MIL MIL-DTL-23919C-2012 Reference Cell, Impressed Current Cathodic Protection (ICCP)-Silver-Silver Chloride
MIL MIL-DTL-23919B-2009 Reference Cell, Impressed Current Cathodic Protection (ICCP)-Silver-Silver Chloride
DIN IEC /TS 62607-4-1 E:2013 Draft Document - Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method (IEC 113/144/CD:2012)

German Institute for Standardization

DIN 40734:1999-05 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
DIN 40737-3:2015 Lead acid batteries - Part 3: Stationary vented batteries with positive tubular plates
DIN EN 60254-2:2009 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008); German version EN 60254-2:2008
DIN EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008); German version EN 60254-2:2008
DIN EN 60254-2:2001 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:1997 + A1:2000); German version EN 60254-2:1997 + A1:2000
DIN EN 60254-2:2009-03 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008); German version EN 60254-2:2008 / Note: DIN EN 60254-2 (2008-12) remains valid alongside this standard until 2011-03-01.
DIN 40734:1999 Lead acid batteries - Stationary vented cells with positive grid plates - Cells in plastic containers; rated capacities, main dimensions, weights
DIN 40737-3:2015-09 Lead acid batteries - Part 3: Stationary vented batteries with positive tubular plates
DIN 40744:2015-09 Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel)
DIN 40744:2015 Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel)
DIN 40742:2015-09 Lead acid batteries - Stationary valve regulated cells with positive tubular plates and immobilized electrolyte (gel)
DIN 40744 Berichtigung 1:2020-02 Lead acid batteries - Stationary valve regulated batteries with positive tubular plates and immobilized electrolyte (gel); Corrigendum 1
DIN 40736-1:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in plastic-containers; rated capacities, main dimensions, weights
DIN 40771-3:1985 Nickel-cadmium-accumulators; cells with pocket plates; cells in steel and plastic containers; types of installation, dimensions
DIN 43539-5:1984 Accumulators; tests; sealed lead storage batteries with grid type plates and immobilized electrolyte, maintenance free; test methods
DIN 40736-2:1992 Lead acid batteries; stationary cells with positive tubular plates; cells in hard-rubber containers; rated capacities, main dimensions, weights
DIN 40736-1:2015-09 Lead acid batteries - Part 1: Stationary vented cells with positive tubular plates in plastic-containers
DIN 40768:1969-09 Alkaline storage batteries; 6 V and 12 V sealed nickel-cadmium batteries, button cells with pasted plates, capacities, main dimensions, technical data
DIN 40739:1999-07 Lead acid batteries - Stationary vented batteries with positive grid plates - Rated capacities, main dimensions, weights
DIN IEC/TS 62607-4-1:2013 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method (IEC 113/144/CD:2012)

PL-PKN

PN E83006-03-1991 Lead-acid batteriesDimensions and capacities of batteries with pasted positive
PN E83006-02-1991 Lead-acid traction batteries Dimensions and capacities of batteries with tubular positives plates
PN E69014-1985 Pressed carbon prodiicts Carbon elektrodes for primary batteries

Japanese Industrial Standards Committee (JISC)

JIS D 5303-2:2004 Lead-acid traction batteries -- Part 2: Dimensions of cells and terminals and marking of polarity on cells
JIS D 5303-2:1997 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells

ZA-SANS

SANS 60254-2:2008 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells
SANS 60254-2:2000 Lead-acid traction batteries Part 2: Dimensions of cells and terminals and marking of polarity on cells

Korean Agency for Technology and Standards (KATS)

KS R IEC 60254-2:2019 Lead-acid traction batteries — Part 2: Dimensions of cells and terminals and marking of polarity on cells
KS D 7031-2022 Magnesium galvanic anodes for cathodic protection
KS M 1077-2023 Determination of lead and cadmium in anode active substance for lithium cell

KR-KS

KS R IEC 60254-2-2019 Lead-acid traction batteries — Part 2: Dimensions of cells and terminals and marking of polarity on cells

Association Francaise de Normalisation

NF EN 60254-2:2008 Lead-acid traction accumulator batteries - Part 2: dimensions of cells and terminals and indication of polarity on cells
NF C58-542/A1:2005 Lead-acid traction batteries - Part 2 : dimensions of cells and terminals and marking of polarity on cells.
NF C58-542*NF EN 60254-2:2008 Lead-acid traction batteries - Part 2 : dimensions of cells and terminals and marking of polarity on cells
NF C58-562:1997 Portable lead-acid cells and batteries (Valve-regulated types). Part 2 : dimensions, terminals and marking.

European Committee for Electrotechnical Standardization（CENELEC）

EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

United States Navy

NAVY MIL-DTL-23919 C-2012 REFERENCE CELL, IMPRESSED CURRENT CATHODIC PROTECTION (ICCP) ?SILVER-SILVER CHLORIDE
NAVY MIL-DTL-23919 B-2009 REFERENCE CELL, IMPRESSED CURRENT CATHODIC PROTECTION (ICCP) ?SILVER-SILVER CHLORIDE

CENELEC - European Committee for Electrotechnical Standardization

EN 60254-2:1997 Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells (Incorporates Amendment A1: 2000)
HD 465.2 S1-1989 Lead-Acid Traction Batteries-Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells

AENOR

UNE-EN 60254-2:2008 Lead-acid traction batteries- Part 2: Dimensions of cells and terminals and marking of polarity on cells

GSO

OS GSO IEC 60254-2:2014 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
BH GSO IEC 60254-2:2015 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells
GSO IEC 60254-2:2014 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

RU-GOST R

GOST 28132-1995 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
GOST 28132-1989 Lead-acip traction accumulators. Basic dimensions
GOST R IEC 60254-2-2009 Lead-acid traction batteries. Part 2. Dimensions of cells and terminals and marking of polarity on cells
GOST 26692-1985 Vented alkaline nickel-cadmium rechargeable cells and storage batteries of capacity over 150 a h. General specification
GOST 18604.15-1977 Bipolar microwave oscillator transistors. Techniques for measuring critical current

Danish Standards Foundation

DS/EN 60254-2:2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

European Committee for Standardization (CEN)

HD 465.2 S1-1987 Lead-acid traction batteries; part 2: dimensions of cells and terminals and marking of polarity on cells
CENELEC EN 60254-2-2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008)

Defense Logistics Agency

DLA DESC-DWG-89021 REV E-2013 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, ULTRA-LOW ESR
DLA DSCC-DWG-89021 REV D-2004 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, ULTRA-LOW ESR

Lithuanian Standards Office

LST EN 60254-2-2008 Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells (IEC 60254-2:2008)

IEC - International Electrotechnical Commission

TS 62607-4-1-2014 Nanomanufacturing – Key control characteristics – Part 4-1 Cathode nanomaterials for lithium ion batteries – Electrochemical characterisation@ 2-electrode cell method (Edition 1.0)

BE-NBN

NBN C 58-254-2-1987 Accumulators Lead-acid traction batteries Part 2 : Dimensions of cells and terminals and marking of polarity on cells

Standard Association of Australia （SAA）

AS 4029.3:1993 Stationary batteries - Lead-acid - Pure lead positive pasted plate type
AS 4029.3:1993/Amdt 1:1996 Fixed battery lead-acid pure lead positive electrode paste plate type

GOSTR

GOST R 57153-2016 Nanomanufacturing. Key control characteristics. Part 4-1. Cathode nanomaterials for lithium ion batteries. Electrochemical characterisation, 2-electrode cell method

Indonesia Standards

SNI 0038-2009 Lead acid batteries for vehicles

WRC - Welding Research Council

BULLETIN 36-1957 ULTRA-HIGH STRENGTH WELD METAL WITH LOW-HYDROGEN ELECTRODES