Primary endpoint of the trial

Primary endpoint of the trial, Total:164 items.

The international standard classification for "Primary endpoint of the trial" includes: Earthworks. Excavations. Foundation construction. Underground works , IT applications in transport and trade , Navigation and control equipment , Product and company certification. Conformity assessment .

The Chinese standard classification for "Primary endpoint of the trial" includes: Subgrade and foundation engineering , Computer application , Management, utilization and service of marine communication and navigation equipment , Standardization and Quality Management .

Military Standard of the People's Republic of China-General Armament Department

GJB 8327-2015 Conventional weapon test ballistic end point coordinate test method
GJB 1801-1993 Main performance test methods of inertial technology testing equipment

Professional Standard - Ferrous Metallurgy

YBJ 236-1991 Key test point for pile foudation

Professional Standard - Traffic

JT/T 412-2000 Codes of main controlling point of national highway

交通运输部

JT/T 1223-2018 Technical specification of the man overboard active alert and positioning terminal
JT/T 412-2022 Godes of main controlling point of national highway

工业和信息化部

YD/T 3789-2020 Technical Requirements and Testing Methods for Calling Line Identification Presentation of Fixed Terminals

未注明发布机构

DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 3399-2012 Specifications for Interpretation of Major Scenic Spots in Changji City
DB65/T 3400-2012 Specifications for Interpretation of Major Scenic Spots in Manas County

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 2222-2019 Requirements for main technical parameters of shipborne broadband satellite communication terminals

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17730-1999 The rules of coding for main controlling point of arterial highway

中国国家认证认可监督管理委员会

RB/T 173-2018 Guideline of assessment for humane endpoints in animal experiment

Anhui Provincial Standard of the People's Republic of China

DB34/T 4488-2023 Technical specifications for fixed-point monitoring of major animal diseases
DB34/T 1202-2010 Technical regulations for the prevention and control of main diseases of channel catfish

Professional Standard - Post and Telecommunication

YD/T 965-2013 The safety requirement and test method for telecommunication terminal equipment
YD/T 4877-2024 General functional technical requirements and test methods for active health data collection terminal equipment

Hunan Provincial Standard of the People's Republic of China

DB43/T 1852-2020 Road transport vehicle active safety protection system terminal technical requirements and test procedures

Professional Standard-Ships

CB/T 3498-1993 Technical requirements for post-repair tests of marine diesel engines
CB/T 3498-2013 Trial technical require ment after diesel main engine repaired

Professional Standard - Military and Civilian Products

WJ 2254-1994 Measuring method for main meteorological parameters of ballistic test in ordnance industry proving ground

Professional Standard - Railway

TB/T 2354-1993 Main technical requirements and test methods for passenger train attendant telephones

SCC

AS G21:1969 End-quench test (Jominy test) for hardenability of steel
BS ISO 10328-3:1996 Prosthetics. Structural testing of lower-limb prostheses-Principal structural tests
BS 2011-2.1CB:1990 Environmental testing. Tests-Test Cb. Damp heat, steady state, primarily for equipment
AWWA 51490 Pilot Testing With the End in Mind
09/30199658 DC BS ISO 13194. Box pallets. Principal requirements and test methods
DANSK DS/ISO 21524:2021 Fire resistance tests – Elements of building construction – Requirements for active fire curtains
AWWA JAW54059 Journal AWWA — Pilot-Testing With the End in Mind
BS ISO 10328-4:1996 Prosthetics. Structural testing of lower-limb prostheses-Loading parameters of principal structural tests

United States Navy

NAVY MIL-I-60676 A VALID NOTICE 1-1986 IGNITER, PRIMARY
NAVY MIL-I-60676 A-1978 IGNITER, PRIMARY
NAVY MIL-I-60676 A NOTICE 2-1999 IGNITER, PRIMARY
NAVY MIL-I-60676 A (1)-1980 IGNITER, PRIMARY

European Association of Aerospace Industries

AECMA PREN 3841-505-1994 Aerospace Series Circuit Breakers Mechanical Test Methods Strength of Main Terminals
AECMA PREN 3841-505-1998 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals Edition P 2
AECMA PREN 3841-505-1996 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals Edition P 1
AECMA PREN 3841-505-2003 Aerospace Series Circuit Breakers Test Methods Part 505: Strength of Main Terminals Edition P 3

CZ-CSN

CSN 35 7000-1956 Main home box for terminal network
CSN 35 7002-1956 Main home box for terminal network HDS2
CSN 35 7001-1956 Main home box for terminal network HDS1
CSN 36 6112-1981 Telephone sets for general use. Main features. Technical specifications. Methods of testing and measurement
CSN 26 2008-1993 Vertical bucket elevators. General characteristics and dimensions
CSN 36 6118-1985 Telephone sets with amplification of receiving. Main features. Technical specifications. Methods of testing and measurement

British Standards Institution (BSI)

BS EN 60512-16-6:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-6: Mechanical tests on contacts and terminations – Test 16f: Robustness of terminations
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations — Test 16r: Deflection of contacts, simulation
BS EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Mechanical tests on contacts and terminations - Test 16e - Gauge retention force (resilient contacts)
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping
BS EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations — Test 16a: Probe damage
BS EN 60068-2-31:2008 Environmental testing –– Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens
BS EN 13726-3:2003 Test methods for primary wound dressings - Waterproofness
BS EN 13726-4:2003 Test methods for primary wound dressings - Conformability
BS EN 13726-1:2002 Test methods for primary wound dressings - Aspects of absorbency
BS EN 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations — Test 16b: Restricted entry
BS ISO 10328-3:1997 Prosthetics.Structural testing of lower-limb prostheses - Principal structural tests
BS EN 13726-6:2003 Test methods for primary wound dressings - Odour control
BS EN 60512-16-11:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16k. Stripping force, solderless wrapped connections
BS EN 60068-2-31:1993 Environmental testing - Test methods - Test Ec - Drop and topple, primarily for equipment-type specimens
BS EN 60512-16-13:2008 Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations — Test 16m: Un-wrapping, solderless wrapped connections

Society of Automotive Engineers (SAE)

SAE J2636-2006 Corrosion Test Master Establishment

HU-MSZT

MSZ KGST 681-1977 Diamond Types and Key Features
MSZ 16678-1982 Main features of SECAM color TV system
MSZ 17000-1960 Main features of stone industry machinery
MSZ 2559/4-1986 Main indicators and characteristics of motorcycle 12V
MSZ 7472/3-1980 Main features of hydraulic controller, circuit changer
MSZ 12433/8-1969 Main technical features Lift lifting capacity, speed
MSZ KGST 1915-1979 Main dimensions and features of multi-layer safety connection shafts

RU-GOST R

GOST 28226-1989 Basic environmental testing procedures. Part 2. Tests. Test Kc: Sulphur dioxide test for contacts and connections
GOST 28227-1989 Basic environmental testing procedures. Part 2. Tests. Test Kd: Hydrogen sulphide test for contacts and connections
GOST 28217-1989 Basic environmental testing. Part 2. Tests. Test Ec: Drop and Topple, primarily for equipment-type specimens
GOST 28200-1989 Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
GOST 28199-1989 Basic environmental, testing procedures. Part 2. Tests. Test A: Cold
GOST 28211-1989 Basic environmental testing procedures. Part 2. Tests. Test T: Soldering
GOST 28210-1989 Basic environmental testing procedures. Part 2. Tests. Test Q: Sealing
GOST 28207-1989 Basic environmental testing procedures. Part 2. Tests. Test Ka: Salt mist
GOST 28214-1989 Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests

European Telecommunications Standards Institute (ETSI)

ETSI ETS 300 483-1996 Terminal Equipment (TE); Integrated Services Digital Network (ISDN); Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)
ETSI PRETS 300 483-1995 Terminal Equipment (TE); Integrated Services Digital Network (ISDN) Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)
ETSI PRETS 300 483-1996 Terminal Equipment (TE); Integrated Services Digital Network (ISDN); Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)

Danish Standards Foundation

DS/ETS 300483:1997 Terminal Equipment (TE) - Integrated Services Digital Network (ISDN) - Multipoint communications for audiovisual services - Main functionalities and basic requirements for Multipoint Control Units (MCUs)
DS/ISO 21524:2021 Fire resistance tests – Elements of building construction – Requirements for active fire curtains

International Electrotechnical Commission (IEC)

IEC 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
IEC 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
IEC 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
IEC 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
IEC 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
IEC 60068-2-67:1995 Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components

German Institute for Standardization

DIN EN 60512-16-6:2009 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008); German version EN 60512-16-6:2008
DIN ETS 300483:1996 Terminal Equipment (TE) - Integrated Services Digital Network (ISDN) - Multipoint communications for audiovisual services; main functionalities and basic requirements for Multipoint Control Units (MCUs); English version ETS 300483:1996
DIN EN 60512-16-3:2009 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008); German version EN 60512-16-3:2008
DIN EN 60512-16-18:2009 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (IEC 60512-16-18:2008); German version EN 60512-16-18:2008
DIN ETS 300483:1996-12 Terminal Equipment (TE) - Integrated Services Digital Network (ISDN) - Multipoint communications for audiovisual services; main functionalities and basic requirements for Multipoint Control Units (MCUs); English version ETS 300483:1996
DIN EN 60512-16-9:2009 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008
DIN EN 60512-16-7:2009 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008
DIN EN 60068-2-67:1996 Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components (IEC 60068-2-67:1995); German version EN 60068-2-67:1996
DIN EN 60512-16-1:2009 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008

Association Francaise de Normalisation

NF C93-400-16-6*NF EN 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6 : mechanical tests on contacts and terminations - Test 16f : robustness of terminations
NF Z82-483*NF ETS 300483:2001 Terminal Equipment (TE) - Integrated Service Digital Network (ISDN) - Multipoint communications for audiovisual services - Main functionalities and basic requirements for Multipoint Control Units (MCUs)
NF C93-400-16-3*NF EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3 : mechanical tests on contacts and terminations - Test 16c : contact-bending strength
NF C93-400-16-18*NF EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18 : mechanical tests on contacts and terminations - Test 16r : deflection of contacts, simulation
NF C93-400-16-7*NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7 : mechanical tests on contacts and terminations - Test 16g : measurement of contact deformation after crimping
NF C93-400-16-9*NF EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9 : mechanical tests on contacts and terminations - Test 16i : grounding contact spring holding force
NF C93-400-16-5*NF EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5 : mechanical tests on contacts and terminations - Test 16e : gauge retention force (resilient contacts)
NF ETS 300483:2001 Telecommunications - Terminal equipment (TE) - Integrated services digital network (ISDN) - Multipoint communications for audiovisual services - Main functionalities and basic requirements for conference bridges
NF C93-400-16-1*NF EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1 : mechanical tests on contacts and terminations - Test 16a : probe damage
NF G28-001:1967 Textiles. Asbestos yarn. Main characteristics and testing methods.
NF EN 60068-2-67:1998 Environmental tests - Part 2: tests - Cy test: continuous damp heat test, accelerated test applicable primarily to components
NF C20-767*NF EN 60068-2-67:1998 Environmental testing. Part 2 : tests. Test Cy : damp heat, steady state, accelerated test primarily intended for components.

European Committee for Electrotechnical Standardization（CENELEC）

EN 60512-16-6:2008 Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
EN 60512-16-1:2008 Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
EN 60512-16-2:2008 Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

ETSI - European Telecommunications Standards Institute

ETS 300 483-1996 Terminal Equipment (TE); Integrated Services Digital Network (ISDN); Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)
PRETS 300 483-1996 Terminal Equipment (TE); Integrated Services Digital Network (ISDN); Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)
PRETS 300 483-1995 Terminal Equipment (TE); Integrated Services Digital Network (ISDN) Multipoint Communications for Audiovisual Services; Main Functionalities and Basic Requirements for Multipoint Control Units (MCUs)

International Organization for Standardization (ISO)

ISO 13194:2011 Box pallets - Principal requirements and test methods
ISO 10328-3:1996 Prosthetics - Structural testing of lower-limb prostheses - Part 3: Principal structural tests
ISO 22870:2006 Point-of-care testing (POCT) - Requirements for quality and competence

American Society for Testing and Materials (ASTM)

ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E324-99 Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM D8422-21 Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
ASTM D1670-98(2003) Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D1670/D1670M-11(2023) Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D1670/D1670M-11(2018) Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

US-FCR

FCR COE ER 70-1-6-1981 PRINCIPAL LABORATORY

Japanese Industrial Standards Committee (JISC)

JIS C 5402-16-5:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations -- Test 16e: Gauge retention force (resilient contacts)
JIS C 5402-16-6:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations -- Test 16f: Robustness of terminations
JIS C 5402-16-7:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations -- Test 16g: Measurement of contact deformation after crimping
JIS C 60068-2-56:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS E 5008:1993 Main rectifiers for railway rolling stock -- Test methods
JIS C 0032:1996 Environmental testing Part 2: Tests. Test Cb: Damp heat, steady state, primarily for equipment
JIS C 5402-16-20:2002 Connectors for electronic equipment -- Tests and measurements -- Part 16-20: Mechanical tests on contacts and terminations -- Test 16t: Mechanical strength (wired termination of solderless connections)
JIS C 5402-16-1:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-1: Mechanical tests on contacts and terminations -- Test 16a: Probe damage
JIS C 60068-2-67:2001 Environmental testing -- Part 2: Tests -- Test Cy: Damp heat, steady state, accelerated test primarily intended for components
JIS C 60068-2-31:1995 Environmental testing Part 2: Tests. Test Ec: Drop and topple, primarily for equipment-type specimens

RO-ASRO

STAS 9418/1-1986 TELEPHONIC INCANDESCENT LAMPS Dimensions and main characteristics
STAS 11334-1979 BELT SPEED VARIATORS Typs and mains characteristics

GOST

GOST R 70359-2022 Cranes. Dead-end stops of rail tracks. Technical requirements

Standard Association of Australia （SAA）

AS 60068.2.67:2003 Environmental testing - Tests - Test Cy: Damp heat, steady state accelerated test primarily intended for components

NEMA - National Electrical Manufacturers Association

NEMA BU 2-1996 Major Requirements Related to the Application and Testing of Low Voltage Busway
NEMA BU 2-1991 Major Requirements Related to the Application and Testing of Low Voltage Busway
NEMA XR 6-1979 LOCATION OF PRIMARY OPERATING CONTROLS FOR SPOT-FILM DEVICES

AT-ON

ONORM V 5720-1993 Land Containers — Principal dimensions, corner fittings and tests Conteneurs pour le transport terrestre — Dimensions principales, garniture d'equerre et essais

European Committee for Standardization (CEN)

EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods

Indonesia Standards

SNI 04-2093-1990 General rules for main distribution frame terminal block telephone cables

PL-PKN

PN S76060-1970 Electrical e?uipiman.t of vehicles gnition coils. Main dimensions

GOSTR

GOST 29166-1991 Mechanical attractions. Steel structures. Principal rules of the design

Korean Agency for Technology and Standards (KATS)

KS P ISO 10328-3:2004 Prosthetics－Structural testing of lower-limb prostheses－Part 3：Principal structural tests
KS P ISO 10328-3:2009 Prosthetics－Structural testing of lower-limb prostheses－Part 3：Principal structural tests
KS C IEC 60068-2-67:2020 Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components

SE-SIS

SIS 02 12 55-1973 Measuring and setting out, primary secondary and detail points on level

KR-KS

KS P ISO 10328-3-2004 Prosthetics－Structural testing of lower-limb prostheses－Part 3：Principal structural tests
KS C IEC 60068-2-67-2023 Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components
KS C IEC 60068-2-67-2020 Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R M.630 SPANISH-1986 PRINCIPALES CARACTER?STICAS DE LOS INTERROGADORES-RESPONDEDORES (IRB) DE DOS FRECUENCIAS INSTALADOS A BORDO DE BARCOS

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 48-1990 Test procedures and requirements for high-voltage alternating-current cable terminations

CEN - European Committee for Standardization

EN ISO 22870:2016 Point-of-care testing (POCT) - Requirements for quality and competence

Others: Standard test method for fire effects of protective clothing materials not primarily intended for fire resistance,Multichannel Analyzer Part 1 Main Technical Requirements and Test Methods,Main test materials or reagents,Standard Test Method for Major and Minor Elements in Coal and Coke by X-ray Fluorescence,Main features of UV aging test chamber,Primary endpoint of the trial,Primary Clinical Endpoint,primary endpoint,Primary and Secondary Endpoints,The scratch resistance test is mainly aimed at